Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CIGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Physics-Based Compact Model for CIGS and CdTe Solar Cells: From Voltage-Dependent Carrier Collection to Light-Enhanced Reverse Breakdown: Preprint

In this paper, we develop a physics-based compact model for copper indium gallium diselenide (CIGS) and cadmium telluride (CdTe) heterojunction solar cells that attributes the failure of superposition to voltage-dependent carrier collection in the absorber layer, and interprets light-enhanced reverse breakdown as a consequence of tunneling-assisted Poole-Frenkel conduction. The temperature dependence of the model is validated against both simulation and experimental data for the entire range of bias conditions. The model can be used to characterize device parameters, optimize new designs, and most importantly, predict performance and reliability of solar panels including the effects of self-heating and reverse breakdown due to partial-shading degradation.

14 SOLAR ENERGY↗

Effect of Metal Halides Treatment on High Throughput Low Temperature CIGS Solar Cells

Copper indium gallium diselenide (CIGS) semiconductor thin films were deposited at high rate and low temperature using single-stage thermal co-evaporation process on molybdenum back contact. A post deposition treatment was done by flashing AgBr at 350 ºC to induce recrystallization. Changes in morphology were confirmed by SEM, with an observed increase in grain size, as well as by XRD measurements, with a decrease in FWHM. Device results show an improvement of the performance after the AgBr vapor treatment, as all the photovoltaic parameters enhanced. Altogether, AgBr seems to be a suitable transport agent and beneficial for device fabrication.

14 SOLAR ENERGY↗

Study of the recombination process at crystallite boundaries in CuIn{sub 1-x}Ga{sub x}Se{sub 2} (CIGS) films by microwave photoconductivity

The loss kinetics of photogenerated charge carriers in thin polycrystalline chalcopyrite CuIn{sub 1-x}Ga{sub x}Se{sub 2} (CIGS) films has been studied by microwave photoconductivity (at 36 GHz). The films were synthesized using the ampoule method and three variants of physical vapor deposition with subsequent selenization: magnetron sputtering, thermal deposition, and modified thermal deposition with intermetallic precursors. The photoconductivity was excited by 8-ns nitrogen laser pulses with maximum intensity of 4 Multiplication-Sign 10{sup 14} photons/cm per pulse. Measurements were performed in the temperature range 148-293 K. The photoresponse amplitude is found to depend linearly on the sizes of coherent-scattering regions in the film grains, which were calculated from X-ray diffraction data. The photoresponse decay obeys hyperbolic law. The photoresponse half-decay time increases with a decrease in both temperature and light intensity. It is shown that the recombination of free holes with trapped electrons is very efficient near the crystallite boundaries.

36 MATERIALS SCIENCE↗

Performance Comparison of Stion CIGS Modules to Baseline Monocrystalline Modules at the New Mexico Florida and Vermont Regional Test Centers: January 2015-December 2016.

This report provides performance data and analysis for two Stion copper indium gallium selenide (CIGS) module types, one framed, the other frameless, and installed at the New Mexico, Florida and Vermont RTCs. Sandia looked at data from both module types and compared the latter with data from an adjacent monocrystalline baseline array at each RTC. The results indicate that the Stion modules are slightly outperforming their rated power, with efficiency values above 100% of rated power, at 25degC cell temperatures. In addition, Sandia sees no significant performance differences between module types, which is expected because the modules differ only in their framing. In contrast to the baseline systems, the Stion strings showed increasing efficiency with increasing irradiance, with the greatest increase between zero and 400 Wm -2 but still noticeable increases at 1000 Wm -2 . Although baseline data availability in Vermont was spotty and therefore comparative trends are difficult to discern, the Stion modules there may offer snow- shedding advantages over monocrystalline-silicon modules but these findings are preliminary.

47 OTHER INSTRUMENTATION↗

Metastability and Long-Term Degradation in CIGS Devices: Effect of Alkali Treatments, Back Contact and Emitter Layers

Thin-film solar cell technologies often suffer from metastable and long-term performance degradation, which may or may not be reversible. The presence of the transient or degradation issues pose challenges for energy-yield prediction in the field for these technologies. Cu(In,Ga)(S,Se) 2 solar cells are a promising thin-film technology, however, the underlying mechanisms of instability in these devices are not well understood. The most common mechanism of metastability in CIGS solar cells has been speculated to be the configuration changes of (VSe-VCu) divacancy complex. However, the role of metastability in light soaking behavior and the effect of alkali treatments and buffer layers is not understood. The goal of the current project is to understand the effect of alkali treatments and buffer materials on metastability and light soaking behavior and develop a device model to simulate experimental results. Input parameters are taken from literature or derived from first-principle calculations, and are fine-tuned through validation experiments.

14 SOLAR ENERGY↗

Generalizable Mechanistic Understanding of Module-Level Light-Moisture and Thermal-Induced Instabilities in CIGS Photovoltaics (Final Report)

The objectives of this project are to identify the root causes of light, heat and humdity induced instabilities in the operation and accelerated testing of commercial Cu(In,Ga)Se 2 [CIGS] photovoltaic modules produced by major module manufacturers (e.g.: Solibro and MiaSolé), correlate them with module degradation/failure modes, and produce accurate service lifetime prediction models.

14 SOLAR ENERGY↗

Systems and methods for solar cells with CIS and CIGS films made by reacting evaporated copper chlorides with selenium

Systems and methods for solar cells with CIS and CIGS films made by reacting evaporated copper chlorides with selenium are provided. In one embodiment, a method for fabricating a thin film device comprises: providing a semiconductor film comprising indium (In) and selenium (Se) upon a substrate; heating the substrate and the semiconductor film to a desired temperature; and performing a mass transport through vapor transport of a copper chloride vapor and se vapor to the semiconductor film within a reaction chamber.

14 SOLAR ENERGY↗

3D and Multimodal X‐Ray Microscopy Reveals the Impact of Voids in CIGS Solar Cells

Small voids in the absorber layer of thin-film solar cells are generally suspected to impair photovoltaic performance. They have been studied on Cu(In,Ga)Se 2 cells with conventional laboratory techniques, albeit limited to surface characterization and often affected by sample-preparation artifacts. Here, synchrotron imaging is performed on a fully operational as-deposited solar cell containing a few tens of voids. By measuring operando current and X-ray excited optical luminescence, the local electrical and optical performance in the proximity of the voids are estimated, and via ptychographic tomography, the depth in the absorber of the voids is quantified. Besides, the complex network of material-deficit structures between the absorber and the top electrode is highlighted. Despite certain local impairments, the massive presence of voids in the absorber suggests they only have a limited detrimental impact on performance.

14 SOLAR ENERGY↗