Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Contribution of Chlorophyll Fluorescence to the Apparent Reflectance of Vegetation

Current strategies for monitoring the physiologic status of terrestrial vegetation rely on remote sensing reflectance (R) measurements, whi ch provide estimates of relative vegetation vigor based primarily on chlorophyll content. Vegetation chlorophyll fluorescence (CF) offers a non-destructive alternative and a more direct approach for diagnosis of vegetation stress before a significant reduction in chlorophyll content has occurred. Thus, monitoring of vegetation vigor based on CF may allow earlier stress detection and more accurate carbon sequestra tion estimates, than is possible using R data alone. However, the observed apparent vegetation reflectance (Ra) in reality includes contrib utions from both the reflected and fluoresced radiation. The aim of t his study is to determine the relative R and CF fractions contributing to Ra from the vegetation in the red to near-infrared region of the spectrum. The practical objectives of the study are to: 1) evaluate t he relationship between CF and R at the foliar level for corn, soybean, maple; and 2) for corn, determine if the relationship established f or healthy (optimal N) vegetation changes under N defiiency. To obtai n generally applicable results, experimental measurements were conducted on unrelated crop and tree species (maple, soybean and corn), unde r controlled conditions and a gradient of inorganic N fertilization l evels. Optical R spectra and actively induced CF emissions were obtained on the same foliar samples, in conjunction with measurements of p hotosynthetic function, pigment levels, and C and N content. The comm on spectral trends or similarities were examined. On average, 10-20% of apparent R at 685 nm was actually due to CF. The spectral trends in steady and maximum F varied significantly, with Fs (especially red) showing higher ability for species and treatment separation. The relative contribution of ChF to R varied significantly among species, with maple emitting much higher F amounts, as compared to corn and soybea n. Fs individual red and far-red bands and their ratio exhibited consistent species separations. For corn, the relative CF fraction increased in concert with the nutrient stress levels from <2% for non-stressed foliage to >7% for severely nutrient deficient plants. F685s provide d optimal treatment separation. This study confirms the trends in F68 5sE740s associated with N deficiency and vegetation stress, established usmg single narrow band excitation.

Campbell, P. K. Entcheva↗

Organopolysiloxane-bonded graphite fluoride as a solid lubricant

A study was conducted on the lubricating properties of organopolysiloxane-bonded graphite fluoride (CF sub 1.1) sub n films. The effects of temperature, atmosphere, composition of organopolysiloxane, and burnishing additional (CF sub 1.1) sub n powder onto the film surface were studied. For comparison, similar experiments were conducted on organopolysiloxane-bonded MoS2 films. The results are equivalent for both films, except that in a moist air environment the wear lives of the films formulated with (CF sub 1.1) sub n are up to 10 times longer than the wear lives of the MoS2-formulated films. Comparison to other (CF sub 1.1) sub n films showed organopolysiloxane films to give better lubrication results than hand-burnished (CF sub 1.1) sub n films but not as good as polyimide-bonded (CF sub 1.1) sub n films.

Fusaro, R. L.↗

Inferred Variable FeO Content in Medium-sized Lunar Pyroclastic Deposits from LRO Diviner Data

Lunar pyroclastic deposits (LPDs) are low albedo features that mantle underlying terrain (Gaddis et al. 1985). They are high priority targets for science and exploration as they are believed to originate from and therefore reflect the composition of the deep lunar interior (NRC, 2011). They are also the best potential resource of oxygen out of any Apollo samples (Allen et al. 1996). Historically, LPDs have been divided into regional versus local categories (Gaddis et al. 2003). The large (>1000 km2 area) regional deposits are deeply sourced (>400 km deep) and result from fire fountaining. Small (<1000 km2) local deposits are thought to result from Vulcanian eruptions in which magma is slowly emplaced beneath the surface until enough volatiles exsolve and the high pressure causes an explosion. Bennett et al. (2013) identified a local deposit (674 km2 area) that may have resulted from both Vulcanian activity and fire fountaining. This deposit potentially represents a new intermediate class of LPDs that straddles the interface between the two formation mechanisms. The deposit also exhibits the highest inferred FeO wt.% of any known lunar glass. In this work we investigate the inferred FeO abundances of other medium-sized deposits to characterize this potential new class of deposits and understand the magnitude of variations in inferred FeO among pyroclastic deposits. We use the method of Greenhagen et al. (2010) to calculate the wavelength of the Christiansen Feature (CF) from Lunar Reconnaissance Orbiter Diviner Lunar Radiometer instrument thermal-infrared observations for four medium-sized deposits. From the CF values, we estimate each deposit's FeO abundance using the method of Allen et al. (2012). The four LPDs that we examined (Oppenheimer South, Beer, Cleomedes, and J. Herschel) all have average CF values from 8.22-8.28 microns, corresponding to FeO abundances of approx. 10-15 wt.%. All of these values are within the range and uncertainties of FeO abundances measured in Apollo samples. As previously identified, the Oppenheimer South deposit exhibits an area of enhanced CF values (8.49 microns) that, if the methods of Allen et al. (2012) can be extrapolated, correspond to a highest observed approx. 30 wt.% FeO. Moon Mineralogy Mapper near-infrared spectra indicate that this area is glass-rich as opposed to olivine-rich. While we are still investigating the nature of the high CF wavelength in Oppenheimer South, spatially-resolved observations there and (to a smaller degree) in our other study sites, shows that FeO wt.% can vary within LPDs. Thus, obtaining only the average FeO abundance over a large area may not be adequate to understand global variation. The magnitude of Oppenheimer South's CF variability, if due to actual surface variations rather than calibration artifacts or spectral mixing, could indicate that it is a unique deposit and not part of a new mid-sized class of deposits. The higher value could be a result of its location within the South Pole Aitken Basin and exsolution of more deeply sourced magma due to the thin crust there.

Bennett, K. A.↗

Meridional Distribution of Aerosol Optical Thickness over the Tropical Atlantic Ocean

Previous studies showed that, over the global ocean, there is hemispheric asymmetry in aerosols and no noticeable asymmetry in cloud fraction (CF). In the current study, we focus on the tropical Atlantic (30 Deg N 30 Deg S) which is characterized by significant amounts of Saharan dust dominating other aerosol species over the North Atlantic. We found that, by contrast to the global ocean, over a limited area such as the tropical Atlantic, strong meridional asymmetry in dust aerosols was accompanied by meridional CF asymmetry. During the 10-year study period (July 2002 June 2012), NASA Aerosol Reanalysis (aka MERRAero) showed that, when the meridional asymmetry in dust aerosol optical thickness (AOT) was the most pronounced (particularly in July), dust AOT averaged separately over the tropical North Atlantic was one order of magnitude higher than dust AOT averaged over the tropical South Atlantic. In the presence of such strong meridional asymmetry in dust AOT in July, CF averaged separately over the tropical North Atlantic exceeded CF averaged over the tropical South Atlantic by 20%. Our study showed significant cloud cover, up to 0.8 - 0.9, in July along the Saharan Air Layer which contributed to above-mentioned meridional CF asymmetry. Both Multi-Angle Imaging SpectroRadiometer (MISR) measurements and MERRAero data were in agreement on seasonal variations in meridional aerosol asymmetry. Meridional asymmetry in total AOT over the Atlantic was the most pronounced between March and July, when dust presence over the North Atlantic was maximal. In September and October, there was no noticeable meridional asymmetry in total AOT and meridional CF distribution over the tropical Atlantic was almost symmetrical.

Cloud Fraction↗

Demonstration of Robustness and Integrated Operation of a Series-Bosch System

Manned missions beyond low Earth orbit will require highly robust, reliable, and maintainable life support systems that maximize recycling of water and oxygen. Bosch technology is one option to maximize oxygen recovery, in the form of water, from metabolically-produced carbon dioxide (CO2). A two stage approach to Bosch, called Series-Bosch, reduces metabolic CO2 with hydrogen (H2) to produce water and solid carbon using two reactors: a Reverse Water-Gas Shift (RWGS) reactor and a carbon formation (CF) reactor. Previous development efforts demonstrated the stand-alone performance of a NASA-designed RWGS reactor designed for robustness against carbon formation, two membrane separators intended to maximize single pass conversion of reactants, and a batch CF reactor with both transit and surface catalysts. In the past year, Precision Combustion, Inc. (PCI) developed and delivered a RWGS reactor for testing at NASA. The reactor design was based on their patented Microlith® technology and was first evaluated under a Phase I Small Business Innovative Research (SBIR) effort in 2010. The RWGS reactor was recently evaluated at NASA to compare its performance and operating conditions with NASA's RWGS reactor. The test results will be provided in this paper. Separately, in 2015, a semi-continuous CF reactor was designed and fabricated at NASA based on the results from batch CF reactor testing. The batch CF reactor and the semi-continuous CF reactor were individually integrated with an upstream RWGS reactor to demonstrate the system operation and to evaluate performance. Here, we compare the performance and robustness to carbon formation of both RWGS reactors. We report the results of the integrated operation of a Series-Bosch system and we discuss the technology readiness level.

Abney, Morgan B.↗

Evaluation of NASA's High-Resolution Global Composition Simulations: Understanding a Pollution Event in the Chesapeake Bay During the Summer 2017 OWLETS Campaign

Recirculation of pollutants due to a bay breeze effect is a key meteorological mechanism impacting air quality near urban coastal areas, but regional and global chemical transport models have historically struggled to capture this phenomenon. We present a case study of a high ozone (O3) episode observed over the Chesapeake Bay during the NASA Ozone Water-Land Environmental Transition Study (OWLETS) in summer 2017. OWLETS included a complementary suite of ground-based and airborne observations, with which we characterize the meteorological and chemical context of this event and develop a framework to evaluate model performance. Two publicly-available NASA global high-resolution coupled chemistry-meteorology models (CCMMs) are investigated: GEOS-CF and MERRA2-GMI. The GEOS-CF R squared value for comparisons between the NASA Sherpa C-23 aircraft measurements to the GEOS-CF resulted in good agreement (R squared: 0.67) on July 19th and fair agreement (R squared: 0.55) for July 20th. Compared to surface observations, we find the GEOS-CF product with a 25 x 25 km squared grid box, at an hourly (R squared: 0.62 to 0.87) and 15-minute (R squared: 0.64 to 0.87) interval for six regional sites outperforms the hourly nominally 50 x 50 km squared gridded MERRA2-GMI (R squared: 0.53 to 0.76) for four of the six sites, suggesting it is better capable of simulating complex chemical and meteorological features associated with ozone transport within the Chesapeake Bay airshed. When the GEOS-CF product was compared to the TOLNet LiDAR observations at both NASA Langley Research Center (LaRC) and the Chesapeake Bay Bridge Tunnel (CBBT), the median differences at LaRC were -6 to 8% and at CBBT were ± 7% between 400 to 2000 m ASL. This indicates that, for this case study, the GEOS-CF is able to simulate surface level ozone diurnal cycles and vertical ozone profiles at small scales between the surface level and 2000 m ASL. Evaluating global chemical model simulations at sub-regional scales will help air quality scientists understand the complex processes occurring at small spatial and temporal scales within complex surface terrain changes, simulating nighttime chemistry and deposition, and the potential to use global chemical transport simulations in support of regional and sub-regional field campaigns.

NASA Ozone Water-Land Environmental Transition Stu↗

TPSAS-NF1676L-11082-DND

Analysis of one decade of radar-lidar and Geostationary Operational Environmental Satellite (GOES) observations at the Atmospheric Radiation Measurement (ARM) Program Southern Great Plains (SGP) site reveals that there is excellent agreement in the long-term mean cloud fractions (CF) derived from the surface and GOES data, and the CF is independent of temporal resolution and spatial scales for grid boxes of size 0.5o to 2.5°. When computed over a 0.5-hr (4-hr) period, cloud frequency of occurrence (FREQ) and amount when present (AWP) derived from the point surface data agree very well with the same quantities determined from GOES for a 0.5o (2.5o) region centered on the ARM SGP site. The values of FREQ (AWP) derived from the radar-lidar observations at a given altitude increase (decrease) as the averaging period increases from 5 min to 6 hours. Similarly, CF at a given altitude increases as the vertical resolution increases from 90 to 1000 m. The profiles of CF have distinct bimodal vertical distributions with a lower peak between 1 and 2 km and a higher one between 8 and 11 km. The 10-year mean total CF, 46.9%, varies seasonally from a summer minimum of 39.8% to a maximum of 54.6% during the winter. The annual mean CF is 1-2% less than that from previous studies, ~48-49%, because fewer clouds occurred during 2005 and 2006, especially during winter. The differences in single- and multi-layered CFs between this study and an earlier analysis can be explained by the different temporal resolutions used in the two studies where single-layered CFs decrease but multilayered CFs increase from a 5-min resolution to a 1-hr resolution. The vertical distribution of nighttime GOES high-cloud tops agrees well with surface observations, but during daytime, fewer high clouds are retrieved by the GOES analysis than seen from the surface observations. The frequencies of occurrence for both daytime and nighttime GOES low-cloud tops are significantly higher than surface observations, but the cloud fractions are in good agreement.

B Xi↗

Evaluation of the GEOS-Chem UCX Stratosphere in the GEOS Composition Forecast System

The NASA GEOS Composition Forecast (GEOS-CF) system provides 3-dimensional atmospheric composition analyses and forecasts to the public in near-real time at the high spatial resolution of 25 km. While the main focus of this new product is on tropospheric air quality information, the GEOS-Chem chemistry model (v12) used in this system includes the UCX stratospheric chemistry mechanism. Here, we describe the GEOS-CF system and provide comparisons against remote-sensed observations for stratospheric composition, including measurements of HCl, ClO, NO2, and O3. The GEOS-CF nudges the stratospheric ozone towards the GEOS Forward Processing (GEOS FP) assimilated ozone product; as a result the stratospheric ozone analysis in theGEOS-CF agrees well with observations. Additionally, with the inclusion of the GEOS-Chem UCX stratospheric chemistry mechanism in GEOS-CF, 5-day forecasts, especially during the abnormal 2020 NH polar spring, capture the chemical and dynamical changes missed by the GEOS FP system, which tends towards climatology. The GEOS-CF is a new tool for the research community providing near-real time 3-dimensional gridded information on atmospheric composition throughout the troposphere and stratosphere.

Stratosphere↗

Observational Evidence of Strong Forcing from Aerosol Effect on Low Cloud Coverage

Aerosols cool Earth’s climate indirectly by increasing low cloud brightness and their coverage (Cf), constituting the aerosol indirect forcing (AIF). The forcing partially offsets the greenhouse warming and positively correlates with the climate sensitivity. However, it remains highly uncertain. Here, we show direct observational evidence for strong forcing from Cf adjustment to increased aerosols and weak forcing from cloud liquid water path adjustment. We estimate that the Cf adjustment drives between 52% and 300% of additional forcing to the Twomey effect over the ocean and a total AIF of −1.1 ± 0.8 W m -2 . The Cf adjustment follows a power law as a function of background cloud droplet number concentration, N d . It thus depends on time and location and is stronger when N d is low. Cf only increases substantially when background clouds start to drizzle, suggesting a role for aerosol-precipitation interactions. Our findings highlight the Cf adjustment as the key process for reducing the uncertainty of AIF and thus future climate projections.

Tianle Yuan↗

Accounting for 3D Radiative Effects in MODIS Aerosol Retrievals near Clouds using CALIPSO Observations

Retrievals of aerosol properties near clouds from passive remote sensing is challenging. Sunlight scattered by clouds into nearby clear regions can effectively enhance the clear area reflectance. These cloud 3D radiative effects may lead to large biases in aerosol retrievals if uncorrected, risking an incorrect interpretation of satellite observations for aerosol-cloud interaction in cloudy atmosphere. In earlier studies, we developed a simple two-layer model (2LM) to estimate the cloud-induced clear-sky radiance enhancements in cloud fields. In this study, we take advantage of CALIPSO lidar observations, which should not be affected by the 3D radiative effect, to study passive aerosol retrievals in cloud fields in the Amazon region, specifically those produced by the operational Dark Target algorithm applied to Aqua-MODIS. From two-years’ worth of co-located CALIPSO/MODIS aerosol retrievals, we find a larger increase in operationally retrieved MODIS AOD from clear to cloudy regions (~0.075 or ~40%) than for the CALIPSO AOD (~0.021 or ~20%). The much larger increase in MODIS AOD is mainly due to the 3D radiative effects. After using the 2LM model to account for cloud 3D radiative effects, the clear to cloudy increase in MODIS AOD was reduced to ~0.043 (~23%), much closer to CALIPSO observations. The 3D corrected average MODIS AOD for cloudy scenes is significantly larger than AOD for clear conditions, even for cloud fraction (CF) less than 0.1, suggesting aerosols in cloudy scenes are characteristically different from aerosols in clear conditions. Furthermore, the 3D correction of AOD (i.e., τ_1D-τ_3D) increases linearly with CF for a large range of CF. We have also examined the impact of the 3D effect on aerosol Ångström Exponent (AE) and fine model fraction (FMF) of AOD. We found that the uncorrected average AE and FMF depend strongly on CF, ~25% increase in AE (decrease in particle size) and ~60% increase in FMF as CF increases from 0.05 to 0.45. The 3D correction leads to smaller average AE (bigger particle size) and FMF that are almost independent of CF. Thus, the 3D corrected aerosol properties are expected to provide more accurate information for better understanding aerosol-cloud interactions.

MODIS↗

Characteristics of statoliths from rootcaps and coleoptiles

Amyloplasts with intact envelopes were isolated from corn coleoptiles, incubated with either cationized ferritin (CF) or fluorescein isothiocyanate (FITC)-CF, and examined with epifluorescence optics. Before incubation, the mean zeta potential was found to be -19.4 mv. The net negative surface charge was confirmed ultrastructurally by the binding of CF to both amyloplasts and starch grains. Binding to the latter was reduced compared to the former. FITC-CF showed binding to some but not all amyloplasts, and was absent from individual starch granules. Membrane-bound calcium, indicated by chlorotetracycline, fluorescence, was detected throughout the cytoplasm of root cap cells. These results may reflect an affinity of CF for membrane-based charge, and suggest that a calcium shell exists on the amyloplast envelope.

Sack, F. D.↗

A theoretical study of resin flows for thermosetting materials during prepreg processing

A flow model which describes the process of resin consolidation during prepreg lamination was developed. The salient features of model predictions were explored. It is assumed that resin flows in all directions originate from squeezing action between two approaching adjacent fiber/fabric layers. In the horizontal direction, a squeezing flow between two nonporous parallel plates is analyzed, while in the vertical direction a poiseuille type pressure flow through porous media is assumed. Proper force and mass balance was established for the whole system which is composed of these two types of flow. A flow parameter, CF, shows to be a measure of processibility for the curing resin. For a given external load-F the responses of resin flow during prepreg lamination, as measured by CF, are categorized into three regions: (1) the low CF region where resin flows are inhibited by the high chemoviscosity during initial curing stages; (2) the median CF region where resin flows are properly controllable; and (3) the high CF region where resin flows are ceased due to fiber/fabric compression effects. Resin losses in both directions are calculated. Potential uses of this model and quality control of incoming prepreg material are discussed.

Hou, T. H.↗

Compilation of Published Estimates of Annual Geocenter Motions Using Space Geodesy

The definition of the term "geocenter motion" depends on the adopted origin of the reference frame. Common reference frames used in Space Geodesy include: the center of mass of the whole Earth (CM), the center of mass of the Solid Earth without mass load (CE), and the center of figure of the outer surface of the Solid Earth (CF). There are two established definitions of the term geocenter: one, the vector offset of CF relative to CM and, two, the reverse, the vector offset of CM relative to CF. Obviously, their amplitude is the same and their phase differs by 180 deg. Following Dong et al. [2003], we label the first X(sub CF, sup CM) and the second X(sup CF, sup CM) (i.e., the superscript represents the frame, the subscript represents any point in the frame).

Elosegui, P.↗

NASA's GEOS Composition Model Assessment of PM2.5 During Wildfires: Inferring the Impact of PM2.5 Exposure on Adverse Respiratory & Cardiovascular Conditions

Particulate matter pollution is a mixture of solid and liquid droplets floating in the air that can lead to reduced air quality and increased adverse health impact. Fine particulate matter (PM2.5) can be emitted into the air from anthropogenic sources such as the burning of fossil fuels, motor vehicles, and powerplant emissions. Exposure to PM2.5 can aggravate pre-existing respiratory and cardiovascular conditions. When PM2.5 is inhaled it can cause damage to the lungs such as reduced lung function and shortness of breath. After being inhaled PM2.5 can enter the bloodstream and cause harm to the heart. One major natural source of PM2.5 exposure is from wildfire smoke. The particulates within the smoke from the wildfires can spread from the initial source region, potentially impacting communities both near and far. During and after wildfire events, PM2.5 levels can exceed the WHO air quality guidelines (10 m.g/m^3 annual mean; 25 m.g/m^3 daily mean), becoming hazardous to an individual's health. Global models can be used to simulate the emission and transport of these particulates and subsequently they can be valuable to air quality forecasting in highly polluted areas. The NASA Goddard Earth Observing System (GEOS) Composition Forecast (GEOS-CF) system has been used to produce near-real time air quality forecasts of atmospheric composition at a high global resolution of 25x25 km2. The GEOS-CF system utilizes the GEOS weather forecast model coupled with GEOS-Chem (version 11) chemistry module to provide analyses and forecasts of various toxic air pollutants, including PM2.5. The GEOS-CF simulated high levels of PM2.5 (40 m.g/m^3 to 250 m.g/m^3 ), exceeding the WHO guidelines, during multiple recent regional and global wildfire seasons, including the 2017 Washington State and Northern and Southern California wildfire seasons. Furthermore, the GEOS-CF simulated PM2.5 applied to a human health assessment model, BenMAP (The Environmental Benefits Mapping and Analysis Program, version 1.3), estimates the impact on adverse respiratory health conditions due to PM2.5 exposure from wildfires. The GEOS-CF predicted PM2.5 during the wildfire season with the corresponding BenMAP results provides an assessment of the human health impact of PM2.5 exposure.

Saunders, Emily↗

A Satellite-Based Estimate of Combustion Aerosol Cloud Microphysical Effects over the Arctic Ocean

Climate predictions for the rapidly changing Arctic are highly uncertain, largely due to a poor understanding of the processes driving cloud properties. In particular, cloud fraction (CF) and cloud phase (CP) have major impacts on energy budgets, but are poorly represented in most models, often because of uncertainties in aerosol–cloud interactions. Here, we use over 10 million satellite observations coupled with aerosol transport model simulations to quantify large scale microphysical effects of aerosols on CF and CP over the Arctic Ocean during polar night, when direct and semi-direct aerosol effects are minimal. Combustion aerosols over sea ice are associated with very large (~10W/sq.m) differences in longwave cloud radiative effects at the sea ice surface. However, co-varying meteorological changes on factors such as CF likely explain the majority of this signal. For example, combustion aerosols explain at most 40% of the CF differences between the full dataset and the clean-condition subset, compared to between 57% and 91% of the differences that can be predicted by co-varying meteorology. After normalizing for meteorological regime, aerosol microphysical effects have small but significant impacts on CF, CP, and precipitation frequency on an Arctic-wide scale. These effects indicate that dominant aerosol–cloud microphysical mechanisms are related to the relative fraction of liquid-containing clouds, with implications for a warming Arctic.

Zamora, Lauren M.↗

Mars 2020's First Sample: The Fractured Rough Rock Unit on the Floor of Jezero Crater

A central goal of the Mars 2020 mission is to select and cache samples for future return to Earth. The first samples targeted for collection are from the crater-retaining, Crater Floor Fractured Rough (CF-Fr) unit of Stack et al., 2020.The CF-Fr unit is a topographically low unit in the current Jezero setting, likely overlain by morphologically discrete units, including possible Jezero delta deposits and eolian features. CF-Fr is an aerially extensive unit with lobate margins. Two distinct morphologies are observed: a locally-exposed lower expression, with flat relatively horizontal light-toned surfaces and polygonal fracturing, and an upper expression consisting of up to ~5vertical meters of massive, sometimes boulder-producing, material. The locally-exposed lower expression appears to represent a local ground level in which the upper material has been removed. Near the Octavia E. Butler landing site, the lower morphology is exposed as polygonally-fractured, light-toned bedrock that appears to grade continuously into higher-standing massive outcrops, often with no clearly exposed contact. Further south, a darker upper expression of the CF-Fr unit is more distinct and the unit exhibits some horizontal layering. The Perseverance rover will initially sample the flat-lying expression of this unit. Hypotheses for the origin of CF-Fr include fluvial, aeolian, or lacustrine sediment likely derived from the Jezero watershed, and/or pyroclastic material resulting from regional volcanism. Geochronology of the returned sample could be used to help constrain the timing of geological events in Jezero. It may also help constrain stratigraphic relationships with crater-retaining units outside of Jezero within the Nili Planum, which could be used to calibrate the cratering chronology of Mars. Paleomagnetic analyses of an oriented sample could establish the history of the martian dynamo and whether it persisted into the Hesperian. Finally, if present, secondary phases within the primary deposit would help constrain diagenetic conditions and inform post-depositional aqueous and potentially habitable environmental conditions.

Justin I Simon↗

First-results from the Perseverance SHERLOC Investigation: Aqueous Alteration Processes and Implications for Organic Geochemistry in Jezero Crater, Mars

The Perseverance rover landed in Jezero crater, a site selected to fulfill the Mars-2020 mission goals of characterizing the geology of habitable environments and searching for signs of life while collecting samples for return to Earth [1]. Jezero hosted an open-basin lake during the late Noachian/early Hesperian (~3.7 Ga) [1-2], has units associated with the largest carbonate deposit identified on Mars [3-4], and has a well-preserved delta with clay and carbonate-bearing sediments, well-suited to preservation of organics [1,3-4]. Investigating the nature of organics and aqueous environments within their geologic con-text allows us to understand important aqueous processes and determine habitability within Jezero crater. Previous in situ landed measurements of organics could not resolve their spatial and mineralogical con-text [5-6]. Although Martian meteorites lack geological context, the spatial distribution of organic compounds in Martian meteorites have allowed recognition of an association between aqueous processes and organics [7-8]. Here, we show for the first time in-situ associations between carbonate-forming ultramafic alteration process, later stage aqueous sulfate and perchlorate formation, and organics on the Martian surface. Methodology and geological context: We use the Perseverance rover’s SHERLOC instrument (Scanning Habitable Environments with Raman and Lumines-ence of Organics and Chemicals), a deep-ultraviolet fluorescence and Raman scattering spectrometer capable of mapping the organic and mineral composition with a spatial resolution of 100 μm resolution to report the presence of organics and aqueously formed minerals at Jezero crater [9]. These spectral detections were compared with co-located images obtained with the autofocus context imager (ACI) and the WATSON camera for textural analysis [9]. As of writing, the Per-severance rover has abraded five targets that were measured with the SHERLOC instrument. The five targets are located in two different orbitally-identified geological units within the floor of Jezero crater; the Crater Floor Fractured Rough unit (CF-Fr) and the Séítah region within the Crater Floor Fractured 1 unit (CF-F1) [10]. In orbital infrared spectroscopic data, the CF-Fr unit is associated with pyroxene spectral signatures and minor alteration, while the Séítah region is associated with olivine and minor Mg-rich carbonates and clays [3-4,10]. Carbonation of ultramafic protolith recorded within Jezero crater: All scans of abraded targets within the Séítah region reveal strong peaks at 1080–1090 cm−1 consistent with carbonate and peak singlets or doublets at 820–840 cm−1 attributed to olivine (Fig. 1), consistent with orbital infrared observations. Our detailed micron-scale petrographic and spectroscopic evidence shows that these carbonates formed through carbonation of an ultramafic protolith. The supporting observations include: (1) Carbonate cation compositions match those of olivine, suggesting mixed Fe- and Mg-olivine gave rise to mixed Fe- and Mg-carbonates, similar to observations of ultramafic systems on Earth and within Martian meteorites [3-4,7-8]. (2) The ob-served carbonates co-occur with hydrated materials, gypsum, and potentially aqueously-formed phases, amorphous silicates and phosphate. (3) The spectral and textural variation of olivine and carbonate dominated zones and olivine-carbonate mixtures within both primary grains and interstitial zones are expected for carbonated ultramafic protoliths. (4) These mineral associations and textures closely resemble those observed within the ALH84001 and Nakhlite meteorites attributed to olivine carbonation on Mars [6-7]. Taken together, micron-scale SHERLOC documentation of these phenomena bridge previous orbital and meteorite observations and demonstrate in-situ regionally extensive (~106 km2) ultramafic alteration resulting in geo-logical deposition of carbonates. Furthermore, we observe that olivine carbonation was involved in preserving and possibly synthesizing organics, which makes this environment potentially habitable, as previously suggested in [1,3-4] (Fig. 1). Late-stage aqueous perchlorate and sulfate in Jezero crater: An abrasion target within the CF-Fr unit contains combinations of high intensity 950-955 cm−1 peaks and minor 1090-1095 cm−1 and 1150-1155 cm−1 peaks that are spectral fits to anhydrous perchlorate (Fig. 1). Some spectra show a combination of 950-955 cm−1 peaks with equally strong 1010-1020 cm−1 peaks, low intensity broad features at 1120 cm−1, and occasional broad 3450 cm−1 hydration (-OH) features, indicating a mixture of Ca-sulfate and perchlorate that is minimally hydrated (Fig. 1). The detections of per-chlorates within Jezero crater differ from previous measurements (e.g. Phoenix lander, Curiosity rover, Tissint meteorite [7,11]) because they are observed to be intimately related to aqueous processes including sulfate formation, they present as a secondary white void-fill occurring within the interior of the rock, and they are found to likely be Na-perchlorate. implications for their formation: Three different types of organics embedded within three different lithologies were observed within the abraded targets. Organics associated with low intensity ~340 nm fluorescence were widespread within targets with no apparent association to particular minerals (Fig. 1). Organics associated with ~305 nm and ~275 nm fluorescence correlated with sulfates within the Bellegarde target in the CF-Fr unit, while organics associated with high intensity ~340 nm fluorescence correlated with carbonate, phosphate, and amorphous silicate mixtures within the Garde target in the Séítah region (Fig. 1). Although assignment of fluorescence signatures to specific organic compounds is not conclusive, ~340 nm fluorescence is generally more consistent with 2-ring aromatic organics, ~275 nm fluorescence is more consistent with 1-ring aromatic organics, and ~305 nm fluorescence can be created by either 2- or 1-ring aromatics [12]. These observations indicate that the strongest fluorescence signatures interpreted as organics were found in materials associated with aqueous processes, i.e. sulfate- and carbonate-bearing materials, suggesting both brines and ultramafic carbonation aqueous environments were capable of preserving organics on ancient Mars. In Martian meteorites, simple aromatic organics proposed to have been synthesized through aqueous processes can be found within minerals associated with olivine carbonation and in spatial association with perchlorate and sulfate materials [7-8], similar to SHERLOC observations. Hence, we advance an abiotic aqueous synthesis origin for the organics although we cannot rule out the presence of organics from meteoritic in-fall or putative organic biosignatures. Detailed analyses will be required upon return of these materials to Earth.

E L Scheller↗

Combustion experimentation aboard the space transportation system

A description is presented of the preliminary concept, specifications, and general requirements of a proposed Combustion Facility (CF) for the Spacelab payload of the Space Transportation System. The CF will permit an experimenter to use suitably contained liquid, gas, or solid fuels. He can specify and establish the composition and pressure level of the atmosphere in which the combustion will take place. It will be possible to characterize the experiment with common types of instrumentation as well as selected specialized equipment, to study the combustion process visually by direct observation and by motion picture coverage, and to obtain time histories of pertinent experimental parameters. During an experimental period, the CF will depend on Spacelab resources for power, heat rejection, and vacuum. Activating the CF and preparing it for the various experiments, performing the experiments, and shutting down the facility will be largely manual operations performed by flight personnel.

Dewitt, R. L.↗