Patterns of Reactivity for Alcohols on Cerium Oxide Thin Films
No abstract prepared.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
No abstract prepared.
An easy and size controlled solvothermal synthesis of CeO{sub 2} hollow spheres is still a challenge in the area of materials synthesis. Here, CeO{sub 2} hollow spheres have been synthesized using PVA500 as a surfactant via solvothermal reaction followed by calcinations. The size of CeO{sub 2} hollow spheres could be controlled from 500 to 150 nm by changing the amounts of Ce(NO{sub 3}){sub 3}{center_dot}6H{sub 2}O and PVA500. The possible growth mechanism of CeO{sub 2} hollow sphere was explained. The CO oxidation catalytic activity of the CeO{sub 2} hollow spheres were superior to that of the commercial CeO{sub 2} powder due to the high specific surface area and small crystallite size. - Graphical abstract: A rapid and easy way to prepare CeO{sub 2} hollow sphere with 150-500 nm in diameter was successfully achieved by solvothermal reaction. The prepared particles showed hollowness due to Ostwald ripening process. An improved catalytic activity was observed and discussed. Highlights: A rapid synthesis of CeO{sub 2} hollow spheres with diameter size from 15 to 500 nm. Black-Right-Pointing-Pointer Cheap surfactant was used to prepare hollow spheres. Black-Right-Pointing-Pointer Effect of temperature and surfactant ratio were investigated. Black-Right-Pointing-Pointer Systematic characterization by XRD, FESEM, TEM, TG, FTIR and UV. Black-Right-Pointing-Pointer CO oxidation analysis results showed better catalytic activity.
No abstract prepared.
Not Available
Highlights: ► Synthesis of nanosized CeO{sub 2} was carried out using mechanochemical reactions plus sequential calcinations procedure. ► The effect of milling time and calcinations procedure on crystallite size and surface area of the as-synthesized powders was investigated. ► The extended milling times were exposed to result in the smaller crystallite size, and hence higher surface area for the as-synthesized powder. ► Higher calcinations temperatures, on the other hand, led to the as-synthesized powder with a larger crystallite size and therefore, lower surface area. ► Activation energy for nanocrystallite growth was calculated during the calcinations procedure and the aforementioned crystallite growth was found to be conducted in the light of interfacial reactions. -- Abstract: The synthesis of nano-sized CeO{sub 2} powder was investigated via mechanochemical reactions between hydrate cerium chloride and sodium hydroxide as the starting materials. The process was followed by a subsequent calcination procedure. Characterization of as-synthesized powder was performed using X-ray diffraction, FTIR spectroscopy, Brunner–Emmett–Teller (BET) nitrogen gas absorption, scanning electron microscopy (SEM) and particle size analyzer (PSA). The precursors were milled for different milling times and then were subjected to different heat treatment procedure at variable temperatures from 100 to 700 °C. According to the results, milling time and calcination temperatures induce paramountal effects on crystallite size and surface area of as-synthesized powders. In addition, the average activation energy for the growth of nanocrystals during calcination was determined to be about 12.53 kJ/mol, suggesting the influence of interfacial reactions on the crystallite growth during the calcination procedure.
High-Z nanoparticles can increase the absorbed radiation dose if they are accumulated in tumor cells. The quantitative measure of this radiosensitization effect is the dose enhancement factor (DEF), that is, the ratio of the doses absorbed in the presence and in the absence of nanoparticles. In the present work, the values of the dose enhancement factors of Ta{sub 2}O{sub 5}, HfO{sub 2}, and CeO{sub 2} ceramic nanoparticles were calculated analytically for monochromatic radiation of the X-ray energy range (1–180 keV) and for low-energy sources for brachytherapy: {sup 103}Pd (mean energy, 20.6 keV), {sup 125}I (26.7 keV), and {sup 131}Cs (30.4 keV). For all types of nanoparticles in the concentration of 5 mg/mL, the values of the dose enhancement factor were high both for monochromatic radiation and for brachytherapy sources. The highest DEF values of ~1.7 were obtained for nanoparticles of tantalum oxide. For brachytherapy sources, the highest dose enhancement factors (1.48 to 1.67) were obtained for Ta{sub 2}O{sub 5} and HfO{sub 2} nanoparticles. These results confirm that ceramic nanoparticles are promising dose modifying agents for radiotherapy.
In this work, low operating voltage and high resistance ratio of different resistance states of binary transition metal oxide based resistive random access memories (RRAMs) are demonstrated. Binary transition metal oxides with high dielectric constant have been explored for RRAM application for years. However, CeO{sub x} is considered as a relatively new material to other dielectrics. Since research on CeO{sub x} based RRAM is still at preliminary stage, fundamental characteristics of RRAM such as scalability and mechanism studies need to be done before moving further. Here, we show very high operation window and low switching voltage of CeO{sub x} RRAMs and also compare electrical performance of Al/CeO{sub x}/Au system between different thin film deposition methods and discuss characteristics and resistive switching mechanism.
The formation of nanorods, driven by the physico-chemical phenomena during the freezing of ceria nanoparticle suspension is reported. During freezing a dilute solution of CeO2 nanocrystals, some nuclei remain in solution while others are trapped inside the voids formed within the growing ice front. Over time the particles trapped within the constrained geometries combined by an oriented attachment process to form ceria nanorods. The experimental observations are further supported through Molecular Dynamics (MD) simulations. These observations suggest a new possible strategy for the templated formation of nanostructures through self assembly by exploiting natural phenomena such as freezing of water. "(A portion of) The research described in this paper (poster or presentation) was performed in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory."
The catalytic activity of cobalt in the production of hydrogen via ethanol steam reforming has been investigated in its relation to the crystalline structure of metallic cobalt. At a reaction temperature of 350 8C, the specific hydrogen production rates show that hexagonal close-packed (hcp) cobalt possesses higher activity than face-centered cubic (fcc) cobalt. However, at typical reaction temperatures (400– 500 8C) for ethanol steam reforming, hcp cobalt is transformed to less active fcc cobalt, as confirmed by in situ X-ray diffractometry (XRD). The addition of CeO2 promoter (10 wt.%) stabilizes the hcp cobalt structure at reforming temperatures up to 600 8C. Moreover, during the pre-reduction process, CeO2 promoter prevents sintering during the transformation of Co3O4 to hcp cobalt. Both reforming experiments and in situ diffuse-reflectance infrared Fourier transform spectroscopy (DRIFTS) showed that the surface reactions were modified by CeO2 promoter on 10% Ce–Co (hcp) to give a lower CO selectivity and a higher H2 yield as compared with the unpromoted hcp Co.
Highlights: • CeO{sub 2} nanoparticles were obtained by microwave-hydrothermal method. • Rietveld refinement reveals a cubic structure. • KOH mineralizer agent exhibit weak agglomeration at low temperature and shorter time. - Abstract: The structural and photoluminescent properties at room temperature of CeO{sub 2} and La-doped CeO{sub 2} particles were undertaken. The obtained particles were synthesized by a microwave-assisted hydrothermal method (MAH) under different lanthanum contents. X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Fourier transform Raman (FT-Raman), Ultra-violet spectroscopy (UV–vis) and photoluminescence (PL) measurements were carried out. XRD revealed that the powders are free of secondary phases and crystallize in the cubic structure. Raman data show that increasing La doping content increase oxygen vacancies due to lattice expansion. The UV/vis absorption spectroscopy suggested the presence of intermediate energy levels in the band gap of structurally ordered powders. Lanthanum addition creates oxygen vacancies and shifts the photoluminescence in the low energy range leading to intense PL emission.
Highlights: • Mn{sub x}Ce{sub 1-x}O{sub 2} (0.1 ≤ x ≤ 0.5) nanostructures were prepared by one step microwave refluxing method. • The saturation magnetization values for the samples rose with increased Mn content. • The oxygen vacancies inherently played crucial role in increasing the magnetization values. - Abstract: In this study, we report the magnetic properties of nanostructured Mn{sub x}Ce{sub 1-x}O{sub 2} (0 0.1 ≤ x ≤ 0.5) materials, synthesized via microwave refluxing technique. Phase purity of the samples was investigated using the structural characterization techniques such as X-ray diffraction (XRD) and transmission electron microscopy (TEM). These analyses indicated the substitution of Ce-ions with Mn-ions in the lattice. The progressive increase in the oxygen vacancies with increased dopant concentration was demonstrated by Raman, UV–vis and photoluminescence spectroscopic studies. X-ray photoelectron spectroscopy analysis further supported the presence of Mn{sup 2+}, Ce{sup 3+} and Ce{sup 4+} ions as well as oxygen vacancies in the samples. The Mn substituted CeO{sub 2} nanostructures were found to exhibit room temperature ferromagnetism (RTFM). There was a continuous improvement in the saturation magnetization (M{sub S}) values with increased Mn concentration. This might be due to the prevalence of surface oxygen vacancies and the systematic rise in their concentration with increased dopant content.
Bremstrahlung Isochromat Spectroscopy (BIS). The XES spectra were collected using a Specs electron gun for the excitation and the XES 350 grating monochromator and channel plate system from Scienta as the photon detection. Spectra were collected in 'normal mode,' where the electron gun kinetic energy (KE) and the energy position of the center of the channel plate were both fixed and the energy distribution in the photon (hv) spectrum was derived from the intensities distributed across the channel plate detector in the energy dispersal direction. The polycrystalline Ce sample was oxidized by exposure to air at ambient pressures. After introduction to the ultra-high vacuum system, the oxidized sample was bombarded with Ar, to clean the topmost surface region and stabilize the surface and near surface regions. Although CeO{sub 2} would be the thermodynamically preferred composition in an oxygen rich environment, the combination of a vacuum environment and ion etching may have driven the near surface region into a Ce{sub 2}O{sub 3} stoichiometry. XES data collection occurred with the sample at or near room temperature. The base pressure of the system was 3 x 10{sup -10} torr, but the pressure changed depending the energy and current of the electron gun. For example, with the XES measurements at KE = 3KeV, the pressure was approximately 8 to 9 x 10{sup -10} torr and the excitation current to the sample was typically 0.01 mA. More detail of the sample preparation and analysis can be found in Reference 1. The XAS experiments were performed at Beamline 8 of the Advance Light Source, as part of a larger collaboration. The ex situ sample used at the ALS was prepared in a fashion similar to that described above. X-ray Emission Spectroscopy (XES) and X-ray Absorption Spectroscopy (XAS), have been used to investigate the photon emission and absorption associated with the Ce3d{sub 5/2} and Ce3d{sub 3/2} core-levels in CeOxide. A comparison of the two processes and their spectra will be made. Recently, we reported the observation of a very strong resonant effect in the Resonant Inverse Photoelectron Spectroscopy of CeOxide. It has now become apparent that there is a utility in a direct comparison of the X-ray Emission Spectroscopy (XES) and X-ray Absorption Spectroscopy (XAS) of similarly prepared CeOxide samples. That comparison is made in this Brief Report/Comment.
Stable, monodisperse sub-micron cerium particle suspensions were synthesized from a Ce IV precursor by homogeneous precipitation with hexamethylenetetramine and ammonium hydroxide.
Cements used in global nuclear waste treatment, storage, and disposal require thorough testing of fresh and cured properties to demonstrate regulatory compliance. Using actual radioactive wastes is often cost-prohibitive during early scoping tests necessitating the use of non-radiological surrogates. Cerium (Ce) is often used as a surrogate for actinides uranium (U) and plutonium (Pu) in spent nuclear fuel, yet few studies have explored how Ce impacts the properties used to qualify a cement for use. Here, this work compares the fresh and cured properties of three classes of cements – ordinary portland cements, ultra-high performance cement composites, and magnesium phosphate cements – each with and without ceria (CeO 2 ). Due to CeO 2 sorption of water (54 vol%) that effectively decreases the water available to hydrate and form binding cement phases, variations in key cement properties were detected that suggest surrogate CeO 2 –cementitious matrices may not be representative of matrix behaviors when using U and Pu sources.
Here, the volumetric redox (chemical) capacitance of the surface of CeO 2–δ films is quantified in situ to be 100-fold larger than the bulk values under catalytically relevant conditions. Sm addition slightly lowers the surface oxygen nonstoichiometry, but effects a 10-fold enhancement in surface chemical capacitance by mitigating defect interactions, highlighting the importance of differential nonstoichiometry for catalysis.
Not provided.