Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CDI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Polymerization of beta-amino acids in aqueous solution

We have compared carbonyl diimidazole (CDI) and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDAC) as activating agents for the oligomerization of negatively-charged alpha- and beta-amino acids in homogeneous aqueous solution. alpha-Amino acids can be oligomerized efficiently using CDI, but not by EDAC. beta-Amino acids can be oligomerized efficiently using EDAC, but not by CDI. Aspartic acid, an alpha- and beta-dicarboxylic acid is oligomerized efficiently by both reagents. These results are explained in terms of the mechanisms of the reactions, and their relevance to prebiotic chemistry is discussed.

NASA Discipline Exobiology↗

Structures of Ca(V) Ca**2+/CaM-IQ Domain Complexes Reveal Binding Modes That Underlie Calcium-Dependent Inactivation And Facilitation

Calcium influx drives two opposing voltage-activated calcium channel (Ca{sub V}) self-modulatory processes: calcium-dependent inactivation (CDI) and calcium-dependent facilitation (CDF). Specific Ca{sup 2+}/calmodulin (Ca{sup 2+}/CaM) lobes produce CDI and CDF through interactions with the Ca{sub V}{alpha}{sub 1} subunit IQ domain. Curiously, Ca{sup 2+}/CaM lobe modulation polarity appears inverted between Ca{sub V}1s and Ca{sub V}2s. Here, we present crystal structures of Ca{sub V}2.1, Ca{sub V}2.2, and Ca{sub V}2.3 Ca{sup 2+}/CaM-IQ domain complexes. All display binding orientations opposite to Ca{sub V}1.2 with a physical reversal of the CaM lobe positions relative to the IQ {alpha}-helix. Titration calorimetry reveals lobe competition for a high-affinity site common to Ca{sub V}1 and Ca{sub V}2 IQ domains that is occupied by the CDI lobe in the structures. Electrophysiological experiments demonstrate that the N-terminal Ca{sub V}2 Ca{sup 2+}/C-lobe anchors affect CDF. Together, the data unveil the remarkable structural plasticity at the heart of Ca{sub V} feedback modulation and indicate that Ca{sub V}1 and Ca{sub V}2 IQ domains bear a dedicated CDF site that exchanges Ca{sup 2+}/CaM lobe occupants.

36 MATERIALS SCIENCE↗

Three-dimensional coherent X-ray diffractive imaging of whole frozen-hydrated cells

Here, a structural understanding of whole cells in three dimensions at high spatial resolution remains a significant challenge and, in the case of X-rays, has been limited by radiation damage. By alleviating this limitation, cryogenic coherent diffractive imaging (cryo-CDI) can in principle be used to bridge the important resolution gap between optical and electron microscopy in bio-imaging. Here, the first experimental demonstration of cryo-CDI for quantitative three-dimensional imaging of whole frozen-hydrated cells using 8 Kev X-rays is reported. As a proof of principle, a tilt series of 72 diffraction patterns was collected from a frozen-hydrated Neospora caninum cell and the three-dimensional mass density of the cell was reconstructed and quantified based on its natural contrast. This three-dimensional reconstruction reveals the surface and internal morphology of the cell, including its complex polarized sub-cellular structure. Finally, it is believed that this work represents an experimental milestone towards routine quantitative three-dimensional imaging of whole cells in their natural state with spatial resolutions in the tens of nanometres.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Modeling salt adsorption in electrical double layer for capacitive deionization

Abstract This work presents an electrical double layer (EDL) model for capacitive deionization (CDI) by intercorrelating the salt adsorption, the electrode voltage, and the surface charge density. The counterion condensation is considered a crucial contribution to salt adsorption because of the high surface charge density in the charged micropores. The counterions condense when the surface charge density exceeds a critical value, which is predicted by the counterion condensation theory. The EDL model accurately correlates the NaCl salt adsorption and electrode voltage with various surface charge densities and well predicts the salt adsorption in a wide range of external salt concentrations. The EDL model reproduces the non‐monotonic relationship between the salt adsorption and the specific surface area observed in experiments and provides an explanation from the modeling perspective. Exhibiting superior accuracy and predictability for salt adsorption, the EDL model could serve as an enabling tool contributing to the development of CDI processes.

Lin, Yu‐Jeng↗

Modeling the Capacitive Deionization Process in Dual-Porosity Electrodes

In many areas of the world, there is a need to increase water availability. Capacitive deionization (CDI) is an electrochemical water treatment process that can be a viable alternative for treating water and for saving energy. A model is presented to simulate the CDI process in heterogeneous porous media comprising two different pore sizes. It is based on a theory for capacitive charging by ideally polarizable porous electrodes without Faradaic reactions or specific adsorption of ions. A two steps volume averaging technique is used to derive the averaged transport equations in the limit of thin electrical double layers. A one-equation model based on the principle of local equilibrium is derived. The constraints determining the range of application of the one-equation model are presented. The effective transport parameters for isotropic porous media are calculated solving the corresponding closure problems. The source terms that appear in the average equations are calculated using theoretical derivations. The global diffusivity is calculated by solving the closure problem.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Seawater desalination by over-potential membrane capacitive deionization: Opportunities and hurdles

The salt removal capacity ( SRC ) of the carbon electrodes in membrane capacitive deionization (MCDI) is limited by the applied potential (<1.6 V). Thus, enhancement of the SRC is essential before applying MCDI to seawater desalination. This study aims at developing a novel MCDI system for seawater desalination by applying over-potential (OP) to enhance ion-adsorption capacity and kinetics, and by reversing the polarity (RP) of electrodes to improve ion-desorption kinetics (hereafter named OP-MCDI-RP) for seawater desalination. At 2.4 V, the OP-MCDI system with mesoporous carbon demonstrated a SRC value of 64.7 mg g –1 when desalting 0.5 M NaCl solution, while the OP-CDI system could only remove 8.2 mg g –1 under identical conditions. Similarly, an OP-MCDI cell using carbon aerogel demonstrated a greater SRC value of 43.4 mg g –1 in comparison with 12.5 mg g –1 achieved in OP-CDI. These results indicate that the OP-MCDI system can directly desalt high salinity water regardless of the electrode material. In contrast to the OP-MCDI system, the OP-MCDI-RP system yields a higher regeneration efficiency by applying a reversed low-voltage. It is shown that, under appropriate operating conditions, the OP-MCDI-RP system reduced the electrical conductivity of a seawater sample of 37 practical salinity units by 99.9%, suggesting that the OP-MCDI-RP system can be employed for seawater desalination. In conclusion, due to the dramatic increase in energy demand and insufficient long-term stability caused by high potential and high salt concentration, however, the OP-MCDI-RP process should be further investigated for potential practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Workflow for evaluating enzyme immobilization and performance for continuous flow manufacturing

Enzymes have shown promise in various industries due to their functional specificity, catalytic efficiency, and environmental sustainability. These biological catalysts can be a pivotal component of manufacturing pipelines like continuous flow chemistry. For this, there exists a need to robustly immobilize enzymes on solid supports and assess the effects of the solid supports on catalytic performance and stability. Here, we use an industrially relevant model enzyme, C. ensiformis (Jack bean) urease, to demonstrate immobilization and assess performance in the context of continuous flow manufacturing. Various immobilization strategies were screened focusing on immobilization efficiency, protocol simplicity, and urease biocatalyst kinetics. Based on this, CDI-agarose and NHS-agarose resins were identified as the best-performing immobilization strategies for urease. CDI-agarose-urease and NHS-agarose-urease were then scaled up and applied to a large-scale continuous flow reactor to evaluate product yields, operational stability, and long-term stability. These experiments identified differences in stability and performance depending on the immobilization method tested. This highlights the importance of screening immobilization methods and subsequent enzyme performance for each candidate biocatalyst used in manufacturing to promote optimal performance and stability. As such, this work provides a framework for evaluating enzyme biocatalyst immobilization approaches to improve performance and enable transition into industrial processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy consumption analysis of constant voltage and constant current operations in capacitive deionization

Here we report our studies to compare energy consumption of a CDI cell in constant voltage (CV) and constant current (CC) operations, with a focus on understanding the underlying physics of consumption patterns. The comparison is conducted under conditions that the CV and CC operations result in the same amounts of input charge and within identical charging phase durations. We present two electrical circuit models to simulate energy consumption in charging phase: one is a simple RC circuit model, and the other a transmission line circuit model. We built and tested a CDI cell to validate the transmission line model, and performed a series of experiments to compare CV versus CC operation under the condition of equal applied charge and charging duration. The experiments show that CC mode consumes energy at 33.8 kJ per mole of ions removed, which is only 28% of CV mode energy consumption (120.6 kJ/mol), but achieves similar level of salt removals. Lastly, together, the models and experiment support our major conclusion that CC is more energy efficient than CV for equal charge and charging duration. The models also suggest that the lower energy consumption of CC in charging is due to its lower resistive dissipation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Cadmium(II) and Copper(II) coordination polymers based on 5-(Pyrazinyl) tetrazolate ligand: Structure, photoluminescence, theoretical calculations and magnetism

Two μ₂-tetrazolyl bridged metal complexes, ([CdI(PTZ)(H₂O)]·H₂O)ₙ1 and ([Cu(PTZ)₂]·H₂O)ₙ2 (HPTZ=5-(pyrazinyl) tetrazolate), were hydrothermally synthesized and fully characterized by X-ray crystallography, elemental analyses and spectrum techniques. In 1, cadmium ions are bridged by tridentate μ₂-κ²N2,N5:κ¹N1 chelating PTZ⁻ ligand and halide linkers into an infinite 1D chain, while in 2 copper ions are connected by tridentate μ₂-κ²N7,N12:κ¹N8 and bidentate μ₂-κ¹N1:κ¹N2 chelating-bridging PTZ⁻ ligands to form a 1D castellated chain structure. Compound 1 displays phosphorescence with a lifetime of ~7.74 ms in the visible region, and the origin of the luminescent emission is primary assigned to the combination of ligand-centered emission, metal-to-ligand charge transfer and ligand-to-ligand charge transfer, which has been probed by the density of states (DOS) calculations. Magnetic measurement reveals that compound 2 displays an anti-ferromagnetic ordering. - Graphical abstract: Two new complexes based on 5-(pyrazinyl) tertrazolate, namely ([CdI(PTZ)(H2O)]·H2O)n and ([Cu(PTZ)2]·H2O)n have been synthesized and characterized. Compound 1 exhibits interesting green luminescence. Compound 2 displays an anti-ferromagnetic ordering. Highlights: • We report two novel 1D μ₂-tetrazolyl bridged Cd(II) and Cu(II) compounds. • The cadmium(II) compound exhibits a green luminescence. • Theoretical calculations were conducted to elucidate the green luminescence. • The Cu(II) compound exhibits an anti-ferromagnetic ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy breakdown in capacitive deionization

We explored the energy loss mechanisms in capacitive deionization (CDI). We hypothesize that resistive and parasitic losses are two main sources of energy losses. We measured contribution from each loss mechanism in water desalination with constant current (CC) charge/discharge cycling. Resistive energy loss is expected to dominate in high current charging cases, as it increases approximately linearly with current for fixed charge transfer (resistive power loss scales as square of current and charging time scales as inverse of current). On the other hand, parasitic loss is dominant in low current cases, as the electrodes spend more time at higher voltages. We built a CDI cell with five electrode pairs and standard flow between architecture. We performed a series of experiments with various cycling currents and cut-off voltages (voltage at which current is reversed) and studied these energy losses. To this end, we measured series resistance of the cell (contact resistances, resistance of wires, and resistance of solution in spacers) during charging and discharging from voltage response of a small amplitude AC current signal added to the underlying cycling current. We performed a separate set of experiments to quantify parasitic (or leakage) current of the cell versus cell voltage. We then used these data to estimate parasitic losses under the assumption that leakage current is primarily voltage (and not current) dependent. Our results confirmed that resistive and parasitic losses respectively dominate in the limit of high and low currents. We also measured salt adsorption and report energy-normalized adsorbed salt (ENAS, energy loss per ion removed) and average salt adsorption rate (ASAR). As a result, we show a clear tradeoff between ASAR and ENAS and show that balancing these losses leads to optimal energy efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective single-atom adsorption for precision separation of lead ions in tap water via capacitive deionization

Capacitive deionization (CDI) offers a cost-effective and low-energy method for selective removal of Pb 2+ from drinking water. Modifying CDI electrode surfaces with functional groups presents a versatile approach to enhancing selective ion adsorption capacity. However, a comprehensive understanding of the selectivity and removal efficiency of Pb 2+ among diverse functional groups remains unexplored. Here, we investigated the effects of different functional groups (-SH, -COOH, and -NH 2 ) attached to the graphene oxide (GO) electrode surfaces on Pb 2+ selectivity and removal efficiency. Surprisingly, GO-COOH demonstrated single-atom adsorption of Pb 2+ , displaying superior removal efficiency and selectivity compared with -SH and -NH 2 , although -SH possesses significant chelation capability for Pb 2+ . Both density functional theory (DFT) calculations and X-ray pair distribution function (PDF) analyses confirmed that Pb 2+ exhibits a theoretically higher affinity to -COOH. Further, this research deepens our understanding of the interactions between functional groups and heavy metal ions, enabling selective and rapid separation of target cations for water purification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using Ultramicroporous Carbon for the Selective Removal of Nitrate with Capacitive Deionization

The contamination of water resources with nitrate is a growing and significant problem. Here we report the use of ultramicroporous carbon as a capacitive deionization (CDI) electrode for selectively removing nitrate from an anion mixture. Through moderate activation, we achieve a micropore-size distribution consisting almost exclusively of narrow (<1 nm) pores that are well suited for adsorbing the planar, weakly hydrated nitrate molecule. Cyclic voltammetry measurements reveal an enhanced capacitance for nitrate when compared to chloride as well as significant ion sieving effects when sulfate is the only anion present. We measure high selectivities ( S ) of both nitrate over sulfate ( S NO 3 /SO 4 = 17.8 ± 3.6 at 0.6 V) and nitrate over chloride ( S NO 3 /Cl = 6.1 ± 0.4 at 0.6 V) when performing a constant voltage CDI separation on 3.33 mM/3.33 mM/1.67 mM Cl/NO 3 /SO 4 feedwater. Furthermore, these results are particularly encouraging considering that a divalent interferant was present in the feed. Using molecular dynamics simulations, we examine the solvation characteristics of these ions to better understand why nitrate is preferentially electrosorbed over sulfate and chloride.

36 MATERIALS SCIENCE↗

Charging and Transport Dynamics of a Flow-Through Electrode Capacitive Deionization System

We present a study of the interplay among electric charging rate, capacitance, salt removal, and mass transport in “flow-through electrode” capacitive deionization (CDI) systems. We develop two models describing coupled transport and electro-adsorption/desorption which capture salt removal dynamics. The first model is a simplified, unsteady zero-dimensional volume-averaged model which identifies dimensionless parameters and figures of merits associated with cell performance. The second model is a higher fidelity area-averaged model which captures both spatial and temporal responses of charging. We further conducted an experimental study of these dynamics and considered two salt transport regimes: (1) advection-limited regime and (2) dispersion-limited regime. We use these data to validate models. The study shows that, in the advection-limited regime, differential charge efficiency determines the salt adsorption at the early stage of the deionization process. Subsequently, charging transitions to a quasi-steady state where salt removal rate is proportional to applied current scaled by the inlet flow rate. In the dispersion-dominated regime, differential charge efficiency, cell volume, and diffusion rates govern adsorption dynamics and flow rate has little effect. In both regimes, the interplay among mass transport rate, differential charge efficiency, cell capacitance, and (electric) charging current governs salt removal in flow-through electrode CDI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cation Selectivity in Capacitive Deionization: Elucidating the Role of Pore Size, Electrode Potential, and Ion Dehydration

Capacitive deionization (CDI) is a promising water desalination technology that is applicable to the treatment of low-salinity brackish waters and the selective removal of ionic contaminants. In this work, we show that by making a small change in the synthetic procedure of hierarchical carbon aerogel monolith (HCAM) electrodes, we can adjust the pore-size distribution and tailor the selectivity, effectively switching between selective adsorption of calcium or sodium ions. Ion selectivity was measured for a mixture of 5 mM NaCl and 2.5 mM CaCl 2 . For the low activated flow-through CDI (fteCDI) cell, we observed extremely high sodium selectivity over calcium (S Na/Ca $\gg$ 10, no Ca 2+ adsorbed) at all of the applied potentials, while for the highly activated fteCDI cell, we observed a selectivity value of 6.6 ± 0.8 at 0.6 V for calcium over sodium that decreased to 2.2 ± 0.03 at 1.2 V. Molecular dynamics simulations indicated that the loss in Ca 2+ selectivity over Na+ at high applied voltages could be due to a competition between ion-pore electrostatic interactions and volume exclusion (“crowding”) effects. Interestingly, we also find with these simulations that the relative sizes of the ions change due to changes in hydration at a higher voltage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unraveling the Ion Adsorption Kinetics in Microporous Carbon Electrodes: A Multiscale Quantum-Continuum Simulation and Experimental Approach

With the understanding that sorption in porous carbon electrodes is crucial to many environmental and energy technologies, such as capacitive deionization (CDI), supercapacitor energy storage, and activated carbon filters. In each of these examples, a practical model that can describe ion electrosorption kinetics is highly desirable for accelerating material design. Here, we proposed a multiscale model to study the ion electrosorption kinetics in porous carbon electrodes by combining quantum mechanical simulations with continuum approaches. Our model integrates the Butler-Volmer (BV) equation for sorption kinetics and a continuously stirred tank reactor (CSTR) formulation with atomistic calculations of ion hydration and ion-pore interactions based on density functional theory (DFT). We validated our model experimentally by using ion mixtures in a flow-through electrode CDI device and developed an in-line UV absorption system to provide unprecedented resolution of individual ions in the separation process. We showed that the multiscale model captures unexpected experimental phenomena that cannot be explained by the traditional ion electrosorption theory. The proposed multiscale framework provides a viable approach for modeling separation processes in systems where pore sizes and ion hydration effects strongly influence the sorption kinetics, which can be leveraged to explore possible strategies for improving carbon-based and, more broadly, pore-based technologies

36 MATERIALS SCIENCE↗

Mesoporous Carbon for Capacitive Deionization of Saline Water

Self-assembled mesoporous carbon (MC) materials have been synthesized and tested for application in capacitive deionization (CDI) of saline water. MC was prepared by self-assembly of a triblock copolymer with hydrogen-bonded chains via a phenolic resin, such as resorcinol or phloroglucinol in acidic conditions, followed by carbonization and, in some cases, activation by KOH. Carbon synthesized in this way was ground into powder, from which activated MC sheets were produced. In a variation of this process, after the reaction of triblock copolymer with resorcinol or phloroglucinol, the gel that was formed was used to coat a graphite plate and then carbonized. The coated graphite plate in this case was not activated and was tested to serve as current collector during the CDI process. The performance of these MC materials was compared to that of carbon aerogel for salt concentrations ranging between 1000 ppm and 35,000 ppm. Resorcinol-based MC removed up to 15.2 mg salt per gram of carbon, while carbon aerogel removed 5.8 mg salt per gram of carbon. Phloroglucinol-based MC-coated graphite exhibited the highest ion removal capacity at 21 mg of salt per gram of carbon for 35,000 ppm salt concentration.

54 ENVIRONMENTAL SCIENCES↗

Phase retrieval by coherent modulation imaging

Phase retrieval is a long-standing problem in imaging when only the intensity of the wavefield can be recorded. Coherent diffraction imaging (CDI) is a lensless technique that uses iterative algorithms to recover amplitude and phase contrast images from diffraction intensity data. For general samples, phase retrieval from a single diffraction pattern has been an algorithmic and experimental challenge. Here we report a method of phase retrieval that uses a known modulation of the sample exit-wave. This coherent modulation imaging (CMI) method removes inherent ambiguities of CDI and uses a reliable, rapidly converging iterative algorithm involving three planes. It works for extended samples, does not require tight support for convergence, and relaxes dynamic range requirements on the detector. CMI provides a robust method for imaging in materials and biological science, while its single-shot capability will benefit the investigation of dynamical processes with pulsed sources, such as X-ray free electron laser.

36 MATERIALS SCIENCE↗

Non-linear enhancement of ultrafast X-ray diffraction through transient resonances

Diffraction-before-destruction imaging with ultrashort X-ray pulses can visualize non-equilibrium processes, such as chemical reactions, with sub-femtosecond precision in the native environment. Here, a nanospecimen diffracts a single X-ray flash before it disintegrates. The sample structure can be reconstructed from the coherent diffraction image (CDI). State-of-the-art X-ray snapshots lack high spatial resolution because of weak diffraction signal. Bleaching effects from photo-ionization significantly restrain image brightness scaling. We find that non-linear transient ion resonances can overcome this barrier if X-ray laser pulses are shorter than in most experiments. We compared snapshots from individual ≈ 100 nm Xe nanoparticles as a function of pulse duration and incoming X-ray fluence. Our experimental results and Monte Carlo simulations suggest that transient resonances can increase ionic scattering cross sections significantly beyond literature values. This provides a novel avenue towards substantial improvement of the spatial resolution in CDI in combination with sub-femtosecond temporal precision at the nanoscale.

47 OTHER INSTRUMENTATION↗