Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bioproduct”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Engineered poplar for bioproduction of the triterpene squalene

Building sustainable platforms to produce biofuels and specialty chemicals has become an increasingly important strategy to supplement and replace fossil fuels and petrochemical-derived products. Terpenoids are the most diverse class of natural products that have many commercial roles as specialty chemicals. Poplar is a fast growing, biomassdense bioenergy crop with many species known to produce large amounts of the hemiterpene isoprene, suggesting an inherent capacity to produce significant quantities of other terpenes. Here we aimed to engineer poplar with optimized pathways to produce squalene, a triterpene commonly used in cosmetic oils, a potential biofuel candidate, and the precursor to the further diversified classes of triterpenoids and sterols. The squalene production pathways were either re-targeted from the cytosol to plastids or co-produced with lipid droplets in the cytosol. Squalene and lipid droplet co-production appeared to be toxic, which we hypothesize to be due to disruption of adventitious root formation, suggesting a need for tissue specific production. Plastidial squalene production enabled up to 0.63 mg/g fresh weight in leaf tissue, which also resulted in reductions in isoprene emission and photosynthesis. These results were also studied through a technoeconomic analysis, providing further insight into developing poplar as a production host.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Bioproduction of cerium-bearing magnetite and application to improve carbon-black supported platinum catalysts

Biogeochemical processing of metals including the fabrication of novel nanomaterials from metal contaminated waste streams by microbial cells is an area of intense interest in the environmental sciences. Here we focus on the fate of Ce during the microbial reduction of a suite of Ce-bearing ferrihydrites with between 0.2 and 4.2 mol% Ce. Cerium K-edge X-ray absorption near edge structure (XANES) analyses showed that trivalent and tetravalent cerium co-existed, with a higher proportion of tetravalent cerium observed with increasing Ce-bearing of the ferrihydrite. The subsurface metal-reducing bacterium Geobacter sulfurreducens was used to bioreduce Ce-bearing ferrihydrite, and with 0.2 mol% and 0.5 mol% Ce, an Fe(II)-bearing mineral, magnetite (Fe(II)(III) 2 O 4 ), formed alongside a small amount of goethite (FeOOH). At higher Ce-doping (1.4 mol% and 4.2 mol%) Fe(III) bioreduction was inhibited and goethite dominated the final products. During microbial Fe(III) reduction Ce was not released to solution, suggesting Ce remained associated with the Fe minerals during redox cycling, even at high Ce loadings. In addition, Fe L 2,3 X-ray magnetic circular dichroism (XMCD) analyses suggested that Ce partially incorporated into the Fe(III) crystallographic sites in the magnetite. The use of Ce-bearing biomagnetite prepared in this study was tested for hydrogen fuel cell catalyst applications. Platinum/carbon black electrodes were fabricated, containing 10% biomagnetite with 0.2 mol% Ce in the catalyst. The addition of bioreduced Ce-magnetite improved the electrode durability when compared to a normal Pt/CB catalyst. Different concentrations of Ce can inhibit the bioreduction of Fe(III) minerals, resulting in the formation of different bioreduction products. Bioprocessing of Fe-minerals to form Ce-containing magnetite (potentially from waste sources) offers a sustainable route to the production of fuel cell catalysts with improved performance.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Systems Biology-Based Optimization of Extremely Thermophilic Lignocellulose Conversion to Bioproducts

This was a collaborative project involving researchers at the University of Georgia, North Carolina State University, Sanford‐Burnham‐Prebys Med. Discovery Institute and the University of Rhode Island. The over-arching goal was to demonstrate that non-model microorganisms, specifically extreme thermophiles, can be a strategic metabolic engineering platform for industrial biotechnology. We engineered the most thermophilic lignocellulose-degrading organism known, Caldicellulosiruptor bescii (Cbes) , which grows optimally near 80°C, and the most thermophilic fermentative organism known, Pyrococcus furiosus (Pfu) , which grows optimally at 100°C, to produce several key industrial chemicals. This work leveraged recent breakthrough advances in the development of molecular genetic tools for these organisms, complemented by a deep understanding of its metabolism and physiology gained over the past decade of study in the PIs’ laboratories. We applied the latest metabolic reconstruction and modeling approaches to optimize biomass to product conversion. Bio-processing above 70°C can have important advantages over near-ambient operations. Highly genetically-modified microorganisms usually have a fitness disadvantage and can be easily overtaken in culture when contaminating microbes are present. The high growth temperature of extreme thermophiles precludes growth or survival of virtually any contaminating organism or phage. This reduces operating costs associated with reactor sterilization and maintaining a sterile facility. In addition, at industrial scales, heat production from microbial metabolic activity vastly outweighs heat loss through bioreactor walls such that cooling is required. Extreme thermophiles have the advantage that non-refrigerated cooling water can be used if needed, and heating requirements can be met with low-grade steam typically in excess capacity on plant sites. We assembled a highly interdisciplinary team that brought together all of the expertise for the project to have successful outcomes. This project also built upon and utilized extensive information already available in the PIs’ labs for both Cbes and Pfu to develop models that provide a comprehensive description of these organisms’ physiology and metabolism that were utilized to inform metabolic engineering strategies. The models were validated with experimental data and the results demonstrated that unpretreated lignocellulose has the potential to be converted into value-added industrial chemicals at high loading at bioreactor scale. The data generated from this research were published in twenty-one peer-reviewed papers in international journals with online access.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Accelerating polyketide synthase engineering for high TRY production of biofuels and bioproducts (Final Technical Report)

Polyketide synthase (PKS) enzymes have a modular, deterministic logic that holds the potential to act as a flexible chemical factory for the biological production of a huge diversity of valuable small molecule compounds. However, engineering a custom PKS to produce a specific desired product currently requires years of trial and error, for reasons that remain poorly understood. In this project, we have developed a rapid, high throughput, Design-Build-Test-Learn (DBTL) cycle for polyketide synthases (PKSs) and demonstrate its utility for production of materials precursors. The objectives are 1) to develop a rapid, high-throughput (HT) DBTL cycle for PKSs that will enable production of a large number of unnatural, organic molecules on demand at high titer, rate, and yield (TRY); 2) to demonstrate the utility of the PKS DBTL cycle to produce three molecules: one commodity chemical (caprolactam or valerolactam) and two novel materials precursors (caprolactam or valerolactam derivatives); and 3) to demonstrate the utility of the PKS DBTL cycle to increase the TRY of one molecule (caprolactam or valerolactam). In this project, we have successfully demonstrated our high throughput PKS DBTL pipeline, and have biologically produced valerolactam and several other novel nylon monomers.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Accelerating polyketide synthase engineering for high TRY production of biofuels and bioproducts (CRADA Final Report)

Polyketide synthase (PKS) enzymes have a modular, deterministic logic that holds the potential to act as a flexible chemical factory for the biological production of a huge diversity of valuable small molecule compounds. However, engineering a custom PKS to produce a specific desired product currently requires years of trial and error, for reasons that remain poorly understood. In this project, we have developed a rapid, high throughput, Design-Build-Test-Learn (DBTL) cycle for polyketide synthases (PKSs) and demonstrate its utility for production of materials precursors. The objectives are 1) to develop a rapid, high-throughput (HT) DBTL cycle for PKSs that will enable production of a large number of unnatural, organic molecules on demand at high titer, rate, and yield (TRY); 2) to demonstrate the utility of the PKS DBTL cycle to produce three molecules: one commodity chemical (caprolactam or valerolactam) and two novel materials precursors (caprolactam or valerolactam derivatives); and 3) to demonstrate the utility of the PKS DBTL cycle to increase the TRY of one molecule (caprolactam or valerolactam). In this project, we have successfully demonstrated our high throughput PKS DBTL pipeline, and have biologically produced valerolactam and several other novel nylon monomers.

09 BIOMASS FUELS↗
DOE OSTI2023

Bioproduction and Evaluation of Renewable Butyl Acetate as a Desirable Bioblendstock for Diesel Fuel

The objective of this project was to develop an integrated bioprocess for efficient butyl acetate (BA) production through strain development using systematic genome engineering and MicroNiche Engineering™ technology (MNE). BA's potential as a bioblendstock for diesel fuel was evaluated through droplet experiments and Mixing Controlled Compression Ignition (MCCI) engine testing. The project aimed to achieve 30 g/L BA production with a yield of 0.4 g/g and a productivity of 0.6 g/L/h. The suitable composition of the blended fuel (BA/biodiesel) would be determined for MCCI engine application.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2026

Engineering-Scale Validation of Novel Algae CO 2 Capture and Bioproducts Technology

The purpose of this project was to advance and scale the algae-based technology Helios-NRG has been developing for capture of CO 2 from the flue gas of coal-burning power plants with conversion of the CO 2 to high-value products. In order to encourage the process becoming commercial and be adoptable, it is essential that the cost of CO 2 be close to net zero or slightly revenue positive. Two methods to achieve this are reducing the cost of operations through efficiencies and selling of products derived from conversion. Helios and the project team partners have accomplished the goals of furthering the technology to be more scalable and substantially lower cost with a defined pathway for commercialization.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Editorial: Cell Free Biocatalysis for the Production of Bioproducts

Biological approaches show promise for the sustainable and cost competitive production of commodity fuels and chemicals. A lot of efforts have been devoted to engineering microbial chassis to produce select fuels and chemicals. These approaches have had some level of success exemplified, of course, by the production of ethanol at high yield and titer but also recent successes with commodity chemicals such as 1,4-butanediol, 1,3-propanediol, and even to some extent with sustainable aviation fuel intermediates such as farnesene. However, many of these processes still suffer from low yields, usually below the standard needed to drive a sustainable and atom efficient bioeconomy. Additionally, for many other chemicals and fuel precursors, titers and yields are only a fraction of what they are for ethanol. Indeed, there exist many limiting factors associated with the use of microbial biocatalysts. Some of these factors include the diversion of carbon from products to sustain growth and biomass formation, the production of byproducts or regulatory mechanisms, the toxicity of end products or intermediates, and the difficulty of separating products from growth media.

09 BIOMASS FUELS↗
DOE OSTI2021

A Genomic Catalog of Stress Response Genes in Anaerobic Fungi for Applications in Bioproduction

Anaerobic fungi are a potential biotechnology platform to produce biomass-degrading enzymes. Unlike model fungi such as yeasts, stress responses that are relevant during bioprocessing have not yet been established for anaerobic fungi. In this work, we characterize both the heat shock and unfolded protein responses of four strains of anaerobic fungi ( Anaeromyces robustus, Caecomyces churrovis, Neocallimastix californiae , and Piromyces finnis ). The inositol-requiring 1 (Ire1) stress sensor, which typically initiates the fungal UPR, was conserved in all four genomes. However, these genomes also encode putative transmembrane kinases with catalytic domains that are similar to the metazoan stress-sensing enzyme PKR-like endoplasmic reticulum kinase (PERK), although whether they function in the UPR of anaerobic fungi remains unclear. Furthermore, we characterized the global transcriptional responses of Anaeromyces robustus and Neocallimastix californiae to a transient heat shock. Both fungi exhibited the hallmarks of ER stress, including upregulation of genes with functions in protein folding, ER-associated degradation, and intracellular protein trafficking. Relative to other fungi, the genomes of Neocallimastigomycetes contained the greatest gene percentage of HSP20 and HSP70 chaperones, which may serve to stabilize their asparagine-rich genomes. Taken together, these results delineate the unique stress response of anaerobic fungi, which is an important step toward their development as a biotechnology platform to produce enzymes and valuable biomolecules.

Swift, Candice L.↗
DOE OSTI2022

iNovo479: Metabolic Modeling Provides a Roadmap to Optimize Bioproduct Yield from Deconstructed Lignin Aromatics by Novosphingobium aromaticivorans

Lignin is an abundant renewable source of aromatics and precursors for the production of other organic chemicals. However, lignin is a heterogeneous polymer, so the mixture of aromatics released during its depolymerization can make its conversion to chemicals challenging. Microbes are a potential solution to this challenge, as some can catabolize multiple aromatic substrates into one product. Novosphingobium aromaticivorans has this ability, and its use as a bacterial chassis for lignin valorization could be improved by the ability to predict product yields based on thermodynamic and metabolic inputs. In this work, we built a genome-scale metabolic model of N. aromaticivorans, iNovo479, to guide the engineering of strains for aromatic conversion into products. iNovo479 predicted product yields from single or multiple aromatics, and the impact of combinations of aromatic and non-aromatic substrates on product yields. We show that enzyme reactions from other organisms can be added to iNovo479 to predict the feasibility and profitability of producing additional products by engineered strains. Thus, we conclude that iNovo479 can help guide the design of bacteria to convert lignin aromatics into valuable chemicals.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Engineered poplar for bioproduction of the triterpene squalene

Here we aimed to engineer poplar with optimized pathways to produce squalene, a triterpene commonly used in cosmetic oils, a potential biofuel candidate, and the precursor to the further diversified classes of triterpenoids and sterols. The squalene production pathways were either re-targeted from the cytosol to plastids or co-produced with lipid droplets in the cytosol. Squalene and lipid droplet co-production appeared to be toxic, which we hypothesize to be due to disruption of adventitious root formation, suggesting a need for tissue specific production. Plastidial squalene production enabled up to 0.63 mg/g fresh weight in leaf tissue, which also resulted in reductions in isoprene emission and photosynthesis. These results were also studied through a technoeconomic analysis, providing further insight into developing poplar as a production host

isoprene emission↗