Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bessel functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Evaluation of the Hypersingular Kernel for a Three-Dimensional Exponentially Graded Material

Martin et al. have shown that the fundamental displacement tensor for three dimensional exponentially graded elasticity can be expressed in terms of one and two dimensional finite integrals of Bessel functions. However, these formulas, and as well those for the corresponding traction kernel, are necessarily expensive to compute, and thus a boundary integral analysis based upon this approach borders on impractical. In this paper we derive new representations for the fundamental graded displacement kernel, given as a relatively simple analytic term, plus a well behaved remainder that can be rapidly obtained numerically. These new expressions are easily differentiated with respect to source and field points, leading to effective formulas for the traction and hypersingular kernels. Test calculations show that the new and old formulas for the displacement and traction kernels agree.

36 MATERIALS SCIENCE↗

Post-circular expansion of eccentric binary inspirals: Fourier-domain waveforms in the stationary phase approximation

We lay the foundations for the construction of analytic expressions for Fourier-domain gravitational waveforms produced by eccentric, inspiraling compact binaries in a post-circular or small-eccentricity approximation. The time-dependent, 'plus' and 'cross' polarizations are expanded in Bessel functions, which are then self-consistently reexpanded in a power series about zero initial eccentricity to eighth order. The stationary-phase approximation is then employed to obtain explicit analytic expressions for the Fourier transform of the post-circular expanded, time-domain signal. We exemplify this framework by considering Newtonian-accurate waveforms, which in the post-circular scheme give rise to higher harmonics of the orbital phase and to amplitude corrections of the Fourier-domain waveform. Such higher harmonics lead to an effective increase in the inspiral mass reach of a detector as a function of the binary's eccentricity e{sub 0} at the time when the binary enters the detector sensitivity band. Using the largest initial eccentricity allowed by our approximations (e{sub 0}<0.4), the mass reach is found to be enhanced up to factors of approximately 5 relative to that of circular binaries for Advanced LIGO, LISA, and the proposed Einstein Telescope at a signal-to-noise ratio of ten. A post-Newtonian generalization of the post-circular scheme is also discussed, which holds the promise to provide 'ready-to-use' Fourier-domain waveforms for data analysis of eccentric inspirals.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fast and accurate CMB computations in non-flat FLRW universes

We present a new method for calculating CMB anisotropies in a non-flat Friedmann universe, relying on a very stable algorithm for the calculation of hyperspherical Bessel functions, that can be pushed to arbitrary precision levels. We also introduce a new approximation scheme which gradually takes over in the flat space limit and leads to significant reductions of the computation time. Our method is implemented in the Boltzmann code class. It can be used to benchmark the accuracy of the camb code in curved space, which is found to match expectations. For default precision settings, corresponding to 0.1% for scalar temperature spectra and 0.2% for scalar polarisation spectra, our code is two to three times faster, depending on curvature. We also simplify the temperature and polarisation source terms significantly, so the different contributions to the C{sub ℓ} 's are easy to identify inside the code.

79 ASTRONOMY AND ASTROPHYSICS↗

Cosmology with decaying cosmological constant—exact solutions and model testing

We study dynamics of Λ(t) cosmological models which are a natural generalization of the standard cosmological model (the ΛCDM model). We consider a class of models: the ones with a prescribed form of Λ(t)=Λ{sub bare}+α{sup 2}/t{sup 2}. This type of a Λ(t) parametrization is motivated by different cosmological approaches. We interpret the model with running Lambda (Λ(t)) as a special model of an interacting cosmology with the interaction term −dΛ(t)/dt in which energy transfer is between dark matter and dark energy sectors. For the Λ(t) cosmology with a prescribed form of Λ(t) we have found the exact solution in the form of Bessel functions. Our model shows that fractional density of dark energy Ω{sub e} is constant and close to zero during the early evolution of the universe. We have also constrained the model parameters for this class of models using the astronomical data such as SNIa data, BAO, CMB, measurements of H(z) and the Alcock-Paczyński test. In this context we formulate a simple criterion of variability of Λ with respect to t in terms of variability of the jerk or sign of estimator (1−Ω{sub m},0−Ω{sub Λ,0}). The case study of our model enable us to find an upper limit α{sup 2} < 0.012 (2σ C.L.) describing the variation from the cosmological constant while the LCDM model seems to be consistent with various data.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-QI-08: Fourier Properties of Cone Beam CT Projection

Purpose: To explore the Fourier properties of cone beam CT (CBCT) projections and apply the property to directly estimate noise level of CBCT projections without any prior information. Methods: By utilizing the property of Bessel function, we derivate the Fourier properties of the CBCT projections for an arbitrary point object. It is found that there exists a double-wedge shaped region in the Fourier space where the intensity is approximately zero. We further derivate the Fourier properties of independent noise added to CBCT projections. The expectation of the square of the module in any point of the Fourier space is constant and the value approximately equals to noise energy. We further validate the theory in numerical simulations for both a delta function object and a NCAT phantom with different levels of noise added. Results: Our simulation confirmed the existence of the double-wedge shaped region in Fourier domain for the x-ray projection image. The boundary locations of this region agree well with theoretical predictions. In the experiments of estimating noise level, the mean relative error between the theory estimation and the ground truth values is 2.697%. Conclusion: A novel theory on the Fourier properties of CBCT projections has been discovered. Accurate noise level estimation can be achieved by applying this theory directly to the measured CBCT projections. This work was supported in part by NIH(1R01CA154747-01), NSFC((No. 61172163), Research Fund for the Doctoral Program of Higher Education of China (No. 20110201110011) and China Scholarship Council.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Interpolation between Airy and Poisson statistics for unitary chiral non-Hermitian random matrix ensembles

We consider a family of chiral non-Hermitian Gaussian random matrices in the unitarily invariant symmetry class. The eigenvalue distribution in this model is expressed in terms of Laguerre polynomials in the complex plane. These are orthogonal with respect to a non-Gaussian weight including a modified Bessel function of the second kind, and we give an elementary proof for this. In the large n limit, the eigenvalue statistics at the spectral edge close to the real axis are described by the same family of kernels interpolating between Airy and Poisson that was recently found by one of the authors for the elliptic Ginibre ensemble. We conclude that this scaling limit is universal, appearing for two different non-Hermitian random matrix ensembles with unitary symmetry. As a second result we give an equivalent form for the interpolating Airy kernel in terms of a single real integral, similar to representations for the asymptotic kernel in the bulk and at the hard edge of the spectrum. This makes its structure as a one-parameter deformation of the Airy kernel more transparent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bifurcation of space-charge wave in a plasma waveguide including the wake potential effect

The wake potential effects on the propagation of the space-charge dust ion-acoustic wave are investigated in a cylindrically bounded dusty plasma with the ion flow. The results show that the wake potential would generate the double frequency modes in a cylindrically bounded dusty plasma. It is found that the upper mode of the wave frequency with the root of higher-order is smaller than that with the root of lower-order in intermediate wave number domains. However, the lower mode of the scaled wave frequency with the root of higher-order is found to be greater than that with the root of lower-order. It is found that the influence in the order of the root of the Bessel function on the wave frequency of the space-charge dust-ion-acoustic wave in a cylindrically confined dusty plasma decreases with an increase in the propagation wave number. It is also found that the double frequency modes increase with increasing Mach number due to the ion flow in a cylindrical dusty plasma. In addition, it is found that the upper mode of the group velocity decreases with an increase in the scaled radius of the plasma cylinder. However, it is shown that the lower mode of the scaled group velocity of the space-charge dust ion acoustic wave increases with an increase in the radius of the plasma cylinder. The variation of the space-charge dust-ion-acoustic wave due to the wake potential and geometric effects is also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gyrokinetic studies of microinstabilities in the reversed field pinch

An analytic equilibrium, the Toroidal Bessel Function Model, is used in conjunction with the gyrokinetic code GYRO to investigate the nature of microinstabilities in a reversed field pinch plasma. The effect of the normalized electron plasma pressure β on the characteristics of the microinstabilities is studied. At a β of 4.5%, a transition between an ion temperature gradient (ITG) and a microtearing mode is observed. Suppression of the ITG mode occurs as in the tokamak, through coupling to shear Alfvén waves, with a critical β for stability higher than its tokamak equivalent due to a shorter parallel connection length. A steep dependence of the microtearing growth rate on the temperature gradient suggests high profile stiffness. There is evidence for a collisionless microtearing mode. The properties of this mode are investigated, and it is found that electron curvature drift plays an important role in the instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

JOVIAN STRATOSPHERE AS A CHEMICAL TRANSPORT SYSTEM: BENCHMARK ANALYTICAL SOLUTIONS

We systematically investigated the solvable analytical benchmark cases in both one- and two-dimensional (1D and 2D) chemical-advective-diffusive systems. We use the stratosphere of Jupiter as an example but the results can be applied to other planetary atmospheres and exoplanetary atmospheres. In the 1D system, we show that CH{sub 4} and C{sub 2}H{sub 6} are mainly in diffusive equilibrium, and the C{sub 2}H{sub 2} profile can be approximated by modified Bessel functions. In the 2D system in the meridional plane, analytical solutions for two typical circulation patterns are derived. Simple tracer transport modeling demonstrates that the distribution of a short-lived species (such as C{sub 2}H{sub 2}) is dominated by the local chemical sources and sinks, while that of a long-lived species (such as C{sub 2}H{sub 6}) is significantly influenced by the circulation pattern. We find that an equator-to-pole circulation could qualitatively explain the Cassini observations, but a pure diffusive transport process could not. For slowly rotating planets like the close-in extrasolar planets, the interaction between the advection by the zonal wind and chemistry might cause a phase lag between the final tracer distribution and the original source distribution. The numerical simulation results from the 2D Caltech/JPL chemistry-transport model agree well with the analytical solutions for various cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surpassing one x-ray photon per electron in nonlinear Thomson scattering in 180 deg. geometry

We have obtained the general analytical expressions of harmonic radiation for Thomson scattering (TS) of arbitrary polarized laser by virtue of generalized Bessel functions and derived the extremum conditions for backscattered harmonics. Especially, for the fundamental backscattered Thomson scattering x-ray yield, we have shown that at the same conditions, the circular polarization reaches maximum while the linear case minimum. This effect is significant when a{sup 2}{>=}1. With the assumption that the x-ray photon yield of a realistic focused pulse of energy E, wavelength {lambda}, and Rayleigh range z{sub R} is equivalent to a plane wave pulse containing N{sub l} cycles via the relation N{sub l}{lambda}=pz{sub R} where the effective factor p is of order one, we applied the plane wave results to realistic laser pulses and deduced that the backscattered x-ray photon number N{sub f} per electron achieves its peak value when the average dimensionless laser intensity a{sup 2}=0.677 and is irrelevant to the value of p. Since N{sub f} and its maximum N{sub fmax} both scale with the square root of E/{lambda}, it is realizable to attain N{sub f}{>=}1 using joule-scale laser pulses while a great challenge for N{sub f}>10.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Explicit approximations to estimate the perturbative diffusivity in the presence of convectivity and damping. III. Cylindrical approximations for heat waves traveling inwards

In this paper, a number of new explicit approximations are introduced to estimate the perturbative diffusivity (χ), convectivity (V), and damping (τ) in cylindrical geometry. For this purpose, the harmonic components of heat waves induced by localized deposition of modulated power are used. The approximations are based on the heat equation in cylindrical geometry using the symmetry (Neumann) boundary condition at the plasma center. This means that the approximations derived here should be used only to estimate transport coefficients between the plasma center and the off-axis perturbative source. If the effect of cylindrical geometry is small, it is also possible to use semi-infinite domain approximations presented in Part I and Part II of this series. A number of new approximations are derived in this part, Part III, based upon continued fractions of the modified Bessel function of the first kind and the confluent hypergeometric function of the first kind. These approximations together with the approximations based on semi-infinite domains are compared for heat waves traveling towards the center. The relative error for the different derived approximations is presented for different values of the frequency, transport coefficients, and dimensionless radius. Moreover, it is shown how combinations of different explicit formulas can be used to estimate the transport coefficients over a large parameter range for cases without convection and damping, cases with damping only, and cases with convection and damping. The relative error between the approximation and its underlying model is below 2% for the case, where only diffusivity and damping are considered. If also convectivity is considered, the diffusivity can be estimated well in a large region, but there is also a large region in which no suitable approximation is found. This paper is the third part (Part III) of a series of three papers. In Part I, the semi-infinite slab approximations have been treated. In Part II, cylindrical approximations are treated for heat waves traveling towards the plasma edge assuming a semi-infinite domain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extension of the Bissell-Johnson plasma-sheath model for application to fusion-relevant and general plasmas

This article presents an approach to solving a special Fredholm-type integral equation of the first kind with a particular kernel containing a modified Bessel function for applications in plasma physics. From the physical point of view, the problem was defined by Bissell and Johnson (B and J) [Phys. Fluids 30, 779 (1987)] as a task to find the potential profile and the ion velocity distribution function in a plane-parallel discharge with a Maxwellian ion source. The B and J model is a generalization of the well-known Tonks-Langmuir (T and L) [Phys. Rev. 34, 876 (1929)] discharge model characterized by a ''cold'' ion source. Unlike the T and L model, which can be readily solved analytically, attempts to solve the B and J model with a ''warm'' ion source have been done only numerically. However, the validity of numerical solutions up to date remains constrained to a rather limited range of a crucial independent parameter of the B and J integral equation, which mathematically is the width of a Gaussian distribution and physically represents the ion temperature. It was solved only for moderately warm ion sources. This paper presents the exact numerical solution of the B and J model, which is valid without any restriction regarding the above-mentioned parameter. It is shown that the ion temperature is very different from the temperature of the ion source. The new results with high-temperature ion sources are not only of particular importance for understanding and describing the plasma-sheath boundary in fusion plasmas, but are of considerable interest for discharge problems in general. The eigenvalue of the problem, found analytically by Harrison and Thompson [Proc. Phys. Soc. 74, 145 (1959)] for the particular case of a cold ion source, is here extended to arbitrary ion-source temperatures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On propagation of long waves in curved ducts.

A two-dimensional detailed study of the behavior of long waves in curved ducts and in junctions between straight and curved ducts will be given. The mathematical treatment of the problem utilizes the method of separation variables. Solutions and expressions for principal mode of the wave are obtained by using the linearized equation of motion solved for its characteristic values. The unavoidable approximations in the numerical solutions of the cylindrical functions are due to use of series expansion of Bessel functions and from restrictions necessary to solve infinite matrices.

Rostafinski, W.↗

Further Development of a Function Generator Technique

Further features and properties of functions generated by generalization of the process originally uncovered to describe the evolution of pressure in a rigid volume due to outgassing or desorption are explored. Properties presented include development of a general Maclaurin series associated with these functions, a limitation in using integration by parts to produce asymptotic expansions, and a general description of an implicit Adams-Moulton method for numerical quadrature of transformed functions. These developments are then applied to develop and explore functions that solve the Sievert integral and the modified Bessel function of the first kind, order zero. Features of the error function and the incomplete lower gamma function are also considered.

Michael S. Woronowicz↗

Modifications to the three-component classification algorithm for SAR data

Previously, a scattering model was used to classify SAR data as due to three mechanisms: surface or odd-bounce scattering; double-bounce scattering; and volume scattering. A Bragg rough-surface model was used for odd-bounce scattering, and two reflecting surfaces, as in a dihedral corner reflector, represented the double-bounce scattering mechanism. A random collection of infinitely thin cylinders was used to model the volume scattering contribution. It was assumed that the cylinders are uniformly oriented in all directions. In this work, modifications are made to the above model, which include specifying a preferred orientation for the cylinders representing branches and using thin cylinders of finite thickness as opposed to infinitely thin ones. In the first case, the preferred orientation is represented by a probability density function in the form of a dirac delta function. For the second case, small argument asymptotic expansions of Bessel functions are used to express the volume scattering contributions in terms of quantities containing the average radius of the cylinders. Since in each case the number of unknowns exceeds that of equations, simplifying assumptions are made. The solutions are applied to multifrequency polarimetric SAR data to obtain the new unknowns in addition to the relative contributions of each scattering mechanism. Several results are presented. It is found that the calculated percentage of each mechanism does not change significantly compared to the original model; however, additional information is gained about the scatterers.

Moghaddam, M.↗

Compact Dielectric-Rod White-Light Delay Lines

Optical delay lines of a proposed type would be made from rods of such dielectric materials as calcium fluoride, fused silica, or sapphire. These would offer advantages over prior optical delay lines, as summarized below. Optical delay lines are key components of opto-electronic microwave oscillators, narrow-band opto-electronic microwave filters, evanescent-field optical biochemical detectors, and some Fourier-Transform spectrum analyzers. Heretofore, optical delay lines used in such applications have been of two types: resonators and coiled long optical fibers, both of which have disadvantages: Resonators are compact, but excitation must be provided by narrow-band lasers. Wide-band (including noisy) laser light cannot be coupled efficiently to narrow-band resonators. When light is coupled into a narrowband resonator from a source of reasonably high power, a significant amount of optical energy circulates within the resonator, causing nonlinear loss and significant noise. Typically, a coil-type optical delay line is made of fused-silica fiber, which exhibits fundamental loss. To overcome the limit imposed by the optical loss in fused silica, it would be necessary to use fibers having crystalline cores. Although space is saved by winding fibers into coils, fiber-coil delay lines are still inconveniently bulky. The proposed compact dielectric-rod delay lines would exploit the special class of non-diffracting light beams that are denoted Bessel beams because their amplitudes are proportional to Bessel functions of the radii from their central axes. High-order Bessel beams can have large values of angular momentum. They can be generated with the help of whispering-gallery-mode optical resonators, as described, for example, in "Simplified Generation of High-Angular-Momentum Light Beams" (NPO-42965) NASA Tech Briefs, Vol. 31, No. 3 (March 2007), page 8a. In a delay line according to the proposal, the dielectric rod would be dimensioned to function as a multimode waveguide. Suitably chosen high-angular-momentum modes in such a waveguide exhibit low group velocity (hence, long delay) and no resonance. Such a delay line could perform well at any wavelength or range of wavelengths within the transparency wavelength band of the dielectric material, and the maximum possible group delay achievable through suitable design would be limited only by the optical loss in the rod material.

Maleki, Lute↗

Aircraft control by propeller cyclic blades

A theory is developed for aircraft control obtained from the propeller forces and moments generated by blade angle variation during a blade revolution. The propeller blade is pitched harmonically one cycle per propeller revolution which results in vehicle control forces and moments, termed cyclic-control. Using a power series respresentation of an arbitrary function of cyclic-blade angle, cyclic-control theory is developed which leads to exact solutions in terms of derivatives of steady-state thrust and power with respect to blade angle. An alternative solution, when the cyclic-blade angle function is limited to a sinusoidal cycle, is in terms of Bessel functions. An estimate of non-steady azimuth angle change or lag is presented. Cyclic-control analysis applied to the counter-rotating propeller shows that control forces or moments can be uniquely isolated from each other. Thus the dual rotor, in hovering mode, has propulsion without rotor tilt or moments, or, when in propeller mode at the tail of an air ship or submarine, vehicle control with no vehicle movement. Control isolation is also attainable from three or more propellers in-line.

Deyoung, J.↗