Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

High efficiency semimetal/semiconductor nanocomposite thermoelectric materials

Rare-earth impurities in III-V semiconductors are known to self-assemble into semimetallic nanoparticles which have been shown to reduce lattice thermal conductivity without harming electronic properties. Here, we show that adjusting the band alignment between ErAs and In{sub 0.53}Ga{sub 0.47-X}Al{sub X}As allows energy-dependent scattering of carriers that can be used to increase thermoelectric power factor. Films of various Al concentrations were grown by molecular beam epitaxy, and thermoelectric properties were characterized. We observe concurrent increases in electrical conductivity and Seebeck coefficient with increasing temperatures, demonstrating energy-dependent scattering. We report the first simultaneous power factor enhancement and thermal conductivity reduction in a nanoparticle-based system, resulting in a high figure of merit, ZT=1.33 at 800 K.

36 MATERIALS SCIENCE↗

GaSb/GaP compliant interface for high electron mobility AlSb/InAs heterostructures on (001) GaP

We report on the epitaxial growth of an AlSb/InAs heterostructure on a (001) GaP substrate. We investigate the conditions for the most efficient relaxation of GaSb islands on GaP. In particular, we show that the GaP surface treatment and the growth temperature are crucial for the formation of a two-dimensional periodic array of 90 deg. misfit dislocations at the episubstrate interface. With this relaxation process, an AlSb/InAs heterostructure exhibiting a room temperature mobility of 25 500 cm{sup 2} V{sup -1} s{sup -1} on GaP is demonstrated. This result paves the way to the integration of Sb-based devices on Si substrates through the use of GaP/Si templates.

36 MATERIALS SCIENCE↗

Direct growth of InAsP/InP quantum well heterostructures on Si using crystalline SrTiO{sub 3}/Si templates

Integrating III-V semiconductors on Si is one of the major challenges of epitaxial growth and presents important applicative interest. We describe here an approach based on the use of crystalline SrTiO{sub 3} (STO)/Si templates. The structural and optical properties of InAsP/InP quantum well heterostructures grown directly on Si and on STO/Si templates are compared. Using STO/Si templates strongly improves the structural properties of the III-V heterostructure, and allows observing room-temperature photoluminescence from the quantum well.

36 MATERIALS SCIENCE↗

Effects of Detuning on Control of Intersubband Quantum Well Transitions with Chirped Electromagnetic Pulses

We study the interaction of a chirped electromagnetic pulse with intersubband transitions of a double semiconductor quantum well. We specifically consider the interaction of the ground and first excited subbands with the electromagnetic field and use the nonlinear density matrix equations for the description of the system dynamics. These equations are solved numerically for various values of the electron sheet density for a realistic double GaAs/AlGaAs quantum well, and the efficiency of population transfer is discussed with emphasis given to the effects of the detuning of the central frequency of the electromagnetic field from resonance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct acoustic phonon excitation by intense and ultrashort terahertz pulses

We report on the direct and resonant excitation of acoustic phonons in an AlGaAs intrinsic semiconductor using intense coherent and single cycle terahertz pulses created by two-color femtosecond laser pulse filamentation in air. While the electrons are left unperturbed, we follow the lattice dynamics with time-delayed optical photons tuned to the interband transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tetragonal To Collapsed Tetragonal Phase Transition In BaFe{sub 2}As{sub 2} and CaFe{sub 2}As{sub 2}

Superconductivity in MFe{sub 2}As{sub 2} (M = Ba, Ca) compounds appears either at a critical doping level at ambient pressure or in the parent compound itself by application of pressure above a critical value. We report high pressure powder x-ray diffractions studies for these compounds at 300 K up to about 56 GPa using membrane diamond anvil cells. The measurements for BaFe{sub 2}As{sub 2} show a new tetragonal to collapsed tetragonal phase transition at about 22 GPa that remains stable upto 56 GPa. CaFe{sub 2}As{sub 2} is already known to transform to collapsed phase at 1.7 GPa at 300 K. Our measurements on CaFe{sub 2}As{sub 2} do not show any post collapsed phase transition on increase of pressure 50 GPa at 300 K. It is important to note that the transition in both compounds occurs when they are compressed to almost the same value of the unit cell volume and attain similar c{sub t}/a{sub t} ratios. We present a detailed analysis of the pressure dependence and structure phase transitions as well as equation of state in these important FeAs compounds that should be useful in the context of possible superconductivity in the collapsed phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanisms of nanodot formation under focused ion beam irradiation in compound semiconductors

We have examined the responses of GaAs, InP, InAs, and AlAs to 30 keV focused ion beam (FIB) irradiation and applied a unified model that consistently explains the observed effects. Nanodots were observed to form on GaAs, InP, and InAs under irradiation at normal incidence, while nanodots are not observed on AlAs. The FIB response and nanodot formation behavior of each material is discussed with regard to a few basic material properties and a model for nanodot creation and growth by the action of preferential sputtering and Ostwald ripening. The model predicts the development of a stable average nanodot size with increasing ion dose, with the average nanodot size depending on the excess group III adatom yield, adatom surface diffusion rate, and surface tension. These predictions qualitatively agree with the experimentally observed trends for GaAs and InP. They also agree for the initial nanodot formation on InAs, but this material system exhibits a sudden transition in the nanodot size distribution. The model predicts that nanodots will have difficulty forming and growing on AlAs, which is also in agreement with our experimental results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Molecular beam epitaxial growth of metamorphic AlInSb/GaInSb high-electron-mobility-transistor structures on GaAs substrates for low power and high frequency applications

We report on molecular beam epitaxial growth of AlInSb/GaInSb metamorphic high-electron-mobility-transistor structures for low power, high frequency applications on 4 in. GaAs substrates. The structures consist of a Ga{sub 0.4}In{sub 0.6}Sb channel embedded in Al{sub 0.4}In{sub 0.6}Sb barrier layers which are grown on top of an insulating metamorphic buffer, which is based on the linear exchange of Ga versus In and a subsequent exchange of As versus Sb. Precise control of group V fluxes and substrate temperature in the Al{sub 0.4}In{sub 0.6}As{sub 1-x}Sb{sub x} buffer is essential to achieve high quality device structures. Good morphological properties were achieved demonstrated by the appearance of crosshatching and root mean square roughness values of 2.0 nm. Buffer isolation is found to be >100 k{Omega}/{open_square} for optimized growth conditions. Hall measurements at room temperature reveal electron densities of 2.8x10{sup 12} cm{sup -2} in the channel at mobility values of 21.000 cm{sup 2}/V s for single-sided Te volume doping and 5.4x10{sup 12} cm{sup -2} and 17.000 cm{sup 2}/V s for double-sided Te {delta}-doping, respectively.

36 MATERIALS SCIENCE↗

Resonant optical reflection by a periodic system of the quantum well excitons at the second quantum state

A periodic multiple quantum well GaAs/AlGaAs structure was designed, grown, and characterized in order to reveal resonant features in optical spectra when the Bragg resonance was tuned to the second quantum state x(e2-hh2) of the heavy-hole exciton-polaritons in the multiple quantum wells. This double resonance was demonstrated by tuning the incident angle of the light as well as by comparison with a single quantum well structure. A significant enhancement of the light-matter interaction was observed, which manifests itself by strong resonant optical reflection and electroreflection.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical investigation of InAs quantum dots inserted in AlGaAs/GaAs modulation doped heterostructure

Optical properties of InAs quantum dots (QDs) inserted in AlGaAs/GaAs modulation doped heterostructure are investigated. To study the effect of carrier transfer behavior on the luminescence of self-assembled quantum dots, a series of sample has been prepared using molecular beam epitaxy (Riber 32 system) in which we have varied the thickness separating the delta dopage and the InAs quantum dots layer. Photoluminescence spectra show the existence of two peaks that can be attributed to transition energies from the ground state (E{sub 1}-HH{sub 1}) and the first excited state (E{sub 2}-HH{sub 2}). Two antagonist effects have been observed, a blue shift of the emission energies result from electron transferred from the AlGaAs/GaAs heterojunction to the InAs quantum dots and a red shift caused by the quantum confined Stark effect due to the internal electric field existing In the AlGaAs/GaAs heterojunction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graphitized carbon on GaAs(100) substrates

We report on the formation of graphitized carbon on GaAs(100) surfaces by molecular beam epitaxy. We grew highly carbon-doped GaAs on AlAs, which was then thermally etched in situ leaving behind carbon atoms on the surface. After thermal etching, Raman spectra revealed characteristic phonon modes for sp{sup 2}-bonded carbon, consistent with the formation of graphitic crystallites. We estimate that the graphitic crystallites are 1.5-3 nm in size and demonstrate that crystallite domain size can be increased through the use of higher etch temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman scattering in InAs/AlGaAs quantum dot nanostructures

We report on Raman scattering experiments on InAs/Al{sub x}Ga{sub 1-x}As quantum dot heterostructures with 0{<=}x{<=}0.6. The samples were prepared by using molecular beam epitaxy (MBE) and atomic layer MBE for the growth of different layers. For x>0, we detected several lines originating from the Al{sub x}Ga{sub 1-x}As alloy. These can be related to scattering from GaAs-like and AlAs-like phonons with q congruent with 0, and weaker scattering from disorder-activated phonons with q{ne}0. In particular, we identified a line at {approx}250 cm{sup -1} as due to disorder-activated longitudinal optical phonons in the alloy. This conclusion is different than the attribution of this line to scattering from dots and, consequently, we do not recognize the possibility of deriving any information about the actual composition of the dots from an analysis of this line as proposed by other authors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of dislocation density on thermal boundary conductance across GaSb/GaAs interfaces

We report on the thermal boundary conductance across structurally-variant GaSb/GaAs interfaces characterized by different dislocations densities, as well as variably-rough Al/GaSb interfaces. The GaSb/GaAs structures are epitaxially grown using both interfacial misfit (IMF) and non-IMF techniques. We measure the thermal boundary conductance from 100 to 450 K with time-domain thermoreflectance. The thermal boundary conductance across the GaSb/GaAs interfaces decreases with increasing strain dislocation density. We develop a model for interfacial transport at structurally-variant interfaces in which phonon propagation and scattering parallels photon attenuation. We find that this model describes the measured thermal boundary conductances well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental and theoretical study for InAs quantum dashes-in-a-step-well structure on (001)-oriented InP substrate

An InAs/In{sub 0.73}Ga{sub 0.27}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.53}Al{sub 0.235}Ga{sub 0.235}As quantum dashes-in-a-step-well (QDSWELL) structure grown via molecular beam epitaxy has been studied. It is observed that the photoluminescence (PL) emission wavelength of such a structure can be as long as 2.12 {mu}m at room temperature (RT). This is the longest emission wavelength of InAs QDashes to be realized at RT. The electron and hole energy levels of the InAs/In{sub 0.73}Ga{sub 0.27}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.53}Al{sub 0.235}Ga{sub 0.235}As QDSWELL structure have been calculated using effective-mass envelope-function theory. The calculated transition energy E{sub E1-HH1} (from the first electron energy level E1 to the first heavy-hole energy level HH1) agrees with the measured PL emission peak position quite well. It is found that QDSWELL is an alternative structure for realizing lasers with wavelengths beyond 2 {mu}m at RT.

36 MATERIALS SCIENCE↗

Power Conversion Efficiency of AlGaAs/GaAs Schottky Diode for Low-Power On-Chip Rectenna Device Application

A Schottky diode has been designed and fabricated on n-AlGaAs/GaAs high-electron-mobility-transistor (HEMT) structure. Current-voltage (I-V) measurements show good device rectification with a Schottky barrier height of 0.4349 eV for Ni/Au metallization. The differences of Schottky barrier height from theoretical value are due to the fabrication process and smaller contact area. The RF signals up to 1 GHz are well rectified by the fabricated Schottky diodes and stable DC output voltage is obtained. Power conversion efficiency up to 50% is obtained at 1 GHz with series connection between diode and load. The fabricated the n-AlGaAs/GaAs Schottky diode provide conduit for breakthrough designs for ultra-low power on-chip rectenna device technology to be integrated in nanosystems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Circular photogalvanic effect induced by near-infrared radiation in InAs quantum wires patterned quasi-two-dimensional electron system

In this letter we investigated the InAs/InAlAs quantum wires (QWRs) superlattice by optically exciting the structure with near-infrared radiation. By varying the helicity of the radiation at room temperature we observed the circular photogalvanic effect related to the C{sub 2v} symmetry of the structure, which could be attributed to the formation of a quasi-two-dimensional system underlying in the vicinity of the QWRs pattern. The ratio of Rashba and Dresselhaus terms shows an evolution of the spin-orbit interaction in quasi-two-dimensional structure with the QWR layer deposition thickness.

36 MATERIALS SCIENCE↗

Electron holographic tomography for mapping the three-dimensional distribution of electrostatic potential in III-V semiconductor nanowires

Electron holographic tomography (EHT), the combination of off-axis electron holography with electron tomography, is a technique, which can be applied to the quantitative 3-dimensional (3D) mapping of electrostatic potential at the nanoscale. Here, we show the results obtained in the EHT investigation of GaAs and GaAs-AlGaAs core-shell nanowires grown by Au-catalysed metalorganic vapor phase epitaxy. The unique ability of EHT of disentangling the materials mean inner potential (MIP) from the specimen projected thickness allows reconstruction of the nanowire 3D morphology and inner compositional structure as well as the measurement of the MIP.

43 PARTICLE ACCELERATORS↗

Analytical Study of BAM (Al/GaAs) and Photovoltaic Samples Using State-of-The-Art Auger Nanoprobes

For the analysis of certified semiconducting Al{sub 0.7}Ga{sub 0.3}As/GaAs superlattices and photovoltaic samples, we used new generations Auger nano-probes such as the JEOL JAMP-9500F Field emission Microprobe and the PHI-700 Xi system. These nano-probes are generally used for the chemical analysis of complex nano-structures at the deca-nanometric scale. In this paper, we first used both systems for the determination of the surface composition of an Al{sub 0.7}Ga{sub 0.3}As/GaAs reference sample. In that, we studied the impact of surface topography on the Auger analysis. Secondly, we used both systems for chemical analysis of photovoltaic samples. Here, we investigated the in-depth chemical composition, in particular the a-Si:H (n)/ZnO/Al and ITO/a-Si:H (p) interfaces, after a specific cross-section preparation. However, limitations such as image drift due to acoustic vibration and heating effects due to continuous bombardment of energetic electrons at the same point are still a big challenge for quick, routine analysis.

36 MATERIALS SCIENCE↗