Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Intermediate temperature thermomechanical processing of Al 2090 for superplasticity

The Al-Cu-Li phase diagram indicates that during thermomechanical processing of Al 2090 at 300 C both T(1) and T(2) phases will precipitate. Following work on Al-Mg-X alloys, it is possible that TMP at such temperatures might promote intragranular formation of these phases and promote microstructural refinement during recrystallization. Microstructural analyses reveal that the T(2) phase in Al 2090 may play a similar role to the beta-phase in Al-Mg-X alloys during microstructural evolution. Mechanical property data indicate that Al 2090 can be moderately (215-245 percent) superplastic at 370 C following processing at 300 C.

Hales, S. J.↗

On Al-26 and other short-lived interstellar radioactivity

Several authors have shown that massive stars exploding at a rate of about three per century can account for a large portion, if not all, of the observed interstellar Al-26. In a separate argument using models of Galactic chemical evolution, Clayton (1984) showed that the Al-26/Al-27 production ratio was not large enough to maintain enough Al-26 in the Galactic disk gas of about 10 exp 10 solar masses having solar composition. We present a resolution of those conflicting arguments. A past history of Galactic infall growing the Galactic disk so dilutes the stable Al-27 concentration that the two approaches can be brought into near agreement. If massive stars dominate the production of Al-26, we suggest that the apparent shortfall of their Al-26/Al-27 yield ratio is to be interpreted as evidence for significant growth of the Galactic disk. We also discuss the implications of these arguments for other extinct radioactivities in meteorites, using I-129 and Sm-146 as examples.

Clayton, Donald D.↗

On the Nature of the High Velocity(26) Al Near the Galactic Center

Recent observations of the Galactic Center region by the GRIS balloon-borne germanium spectrometer have determined that the diffuse 1809 keV emission resulting from the decay of Al-26 has an intrinsic width of 5.4 keV FWHM. This line width indicates that the Al-26 is either at a temperature of approximately 4.5 x 10(exp 8) K or it has a nonthermal velocity of approximately 500 km/s. Previous authors have suggested that the Al-26 must be trapped within dust grains in the ISM in order for these conditions to persist over the 10(exp 6) year lifetime of the aluminum (see e.g. Naya et al. 1996, Chen et al. 1998). We discuss the results of our model for the initial acceleration of the Al-26 in dust grains as they exit their source, Type II supernovae, and their subsequent reacceleration in the ISM by ambient supernova remnant (SNR) shocks. Our results show that dust grains can be maintained at a velocity sufficient to explain the GRIS observation for ISM densities of approximately 0.2 cu cm, dust grain sizes near 10(exp -5) cm, and distances between SNR shocks in the ISM of 100 - 200 pc.

Sturner, Steven J.↗

Effects of Thermal Exposure on Properties of Al-Li Alloys

Aluminum-Lithium (Al-Li) alloys offer significant performance benefits for aerospace structural applications due to their higher specific properties compared with conventional Al alloys. For example, the application of Al-Li alloy 2195 to the space shuffle external cryogenic fuel tank resulted in weight savings of over 7,000 lb, enabling successful deployment of International Space Station components. The composition and heat treatment of 2195 were optimized specifically for strength-toughness considerations for an expendable cryogenic tank. Time-dependent properties related to reliability, such as thermal stability, fatigue, and corrosion, will be of significant interest when materials are evaluated for a reusable cryotank structure. Literature surveys have indicated that there is limited thermal exposure data on Al-Li alloys. The effort reported here was designed to establish the effects of thermal exposure on the mechanical properties and microstructure of Al-Li alloys C458, L277, and 2195 in plate gages. Tensile, fracture toughness, and corrosion resistance were evaluated for both parent metal and friction stir welds (FSW) after exposure to temperatures as high as 300 F for up to 1000 hrs. Microstructural changes were evaluated with thermal exposure in order to correlate with the observed data trends. The ambient temperature parent metal data showed an increase in strength and reduction in elongation after exposure at lower temperatures. Strength reached a peak with intermediate temperature exposure followed by a decrease at highest exposure temperature. Friction stir welds of all alloys showed a drop in elongation with increased length of exposure. Understanding the effect of thermal exposure on the properties and microstructure of Al-Li alloys must be considered in defining service limiting temperatures and exposure times for a reusable cryotank structure.

Shah, Sandeep↗

Derivation of Apollo 14 High-Al Basalts at Discrete Times: Rb-Sr Isotopic Constraints

Pristine Apollo 14 (A-14) high-Al basalts represent the oldest volcanic deposits returned from the Moon [1,2] and are relatively enriched in Al2O3 (>11 wt%) compared to other mare basalts (7-11 wt%). Literature Rb-Sr isotopic data suggest there are at least three different eruption episodes for the A-14 high-Al basalts spanning the age range approx.4.3 Ga to approx.3.95 Ga [1,3]. Therefore, the high-Al basalts may record lunar mantle evolution between the formation of lunar crust (approx.4.4 Ga) and the main basin-filling mare volcanism (<3.85 Ga) [4]. The high-Al basalts were originally classified into five compositional groups [5,6], and then regrouped into three with a possible fourth comprising 14072 based on the whole-rock incompatible trace element (ITE) ratios and Rb-Sr radiometric ages [7]. However, Rb-Sr ages of these basalts from different laboratories may not be consistent with each other because of the use of different 87Rb decay constants [8] and different isochron derivation methods over the last four decades. This study involved a literature search for Rb-Sr isotopic data previously reported for the high-Al basalts. With the re-calculated Rb-Sr radiometric ages, eruption episodes of A-14 high-Al basalts were determined, and their petrogenesis was investigated in light of the "new" Rb-Sr isotopic data and published trace element abundances of these basalts.

Hui. Hejiu↗

Preparation for an Earth Independent Medical Operations Demonstration using the Tempus ALS™ Medical Device

NASA’s exploration-class missions have severe resource constraints, long return trip durations, significant communication delays and limited resupply opportunities. Validation on the International Space Station (ISS) of medical devices that fit within Earth-Independent Medical Operations (EIMO) systems is a necessary preparation step. Key features of an EIMO medical system include: 1) technologies that support the prevention, diagnosis, and treatment of spaceflight medical events; 2) components that meet mass, volume, power and crew time/training constraints; 3) consideration of the medical skill level of the astronaut caregiver; 4) collection, storage and analysis of medical data within a central data architecture; and 5) incorporation of appropriate guidance and support tools that allow crew autonomy. The Human Research Program’s (HRP) Exploration Medical Capability (ExMC) Element and the Exploration Medical Integrated Product Team (XM-IPT) are planning an ISS technology demonstration to determine the feasibility of including a multifunctional medical device into an EIMO medical system. Demonstration Preparations: The Tempus ALS (Remote Diagnostic Technologies, Ltd., Philips Corp., Farnborough, UK) is a commercial-off-the-shelf medical device, with United States Food and Drug Administration clearance and is Conformité Européene marked in Europe. Several thousand units have been sold and are successfully operating in pre-hospital and in remote settings, such as by European Space Agency (ESA) flight surgeons and some of NASA’s commercial partners during post-flight medical operations. The Tempus ALS provides vital sign measurements such as blood pressure, electrocardiograms, heart rate, end tidal CO2, respiration rate, pulse oximetry and temperature. The device has ultrasound imaging and video laryngoscopy capabilities and has automatic or manual defibrillation modes for treating cardiac arrhythmias. It includes procedural guidance capabilities to assist in the collection of the vital sign measurements and it has various data transmission and report generation features. NASA’s HRP ExMC and XM-IPT are partnering with the ESA to demonstrate the Tempus ALS on ISS, with ESA manifesting the Tempus ALS and its accessories. ESA will compare performance of periodic health status exams and medical contingency drills performed nominally and with the Tempus ALS. NASA’s EIMO demonstration will include the use of Tempus ALS to diagnose a complaint of abdominal pain under increasingly independent circumstances. The caregiver must assess the present illness, collect vital sign measurements, and perform an abdominal ultrasound, under one of three communication situations, including real-time, with a several second delay and with a delay on the order of minutes. Expected Outcomes: Information will be gained about the feasibility, benefits, and challenges of using a multifunctional, all-in-one, medical device for medical diagnosis instead of separate devices with singular functionalities. Information will also be collected about performance differences as communication delays increase and available ground support decreases. Gaining this understanding will allow for further development of exploration medical system capabilities which takes the EIMO construct into consideration.

Beth Lewandowski↗

Interdiffusion and intrinsic diffusion in the NiAl /delta/ phase of the Al-Ni system

Interdiffusion coefficients at 950 to 1150 C and the ratio of intrinsic diffusion coefficients at 1100 C were measured as functions of composition in the NiAl (delta) phase of the Al-Ni system, using a vapor-solid technique. Diffusivity values were also obtained for the Ni3Al (epsilon) and Ni (Al) solid solution (zeta) phases from 950 to 1150 C. The interdiffusion coefficient in NiAl (delta) varies several orders of magnitude over the delta phase field with a deep minimum in the diffusivity-composition curve at 48 to 49 at% Al. The ratio of intrinsic diffusion coefficients DNi/DAl, in the delta phase also varies with composition from a value of 3 to 3.5 below 50 at% Al to 0.1 or less above 50 at% Al.

Shankar, S.↗

A feasibility study of a diffusion barrier between Ni-Cr-Al coatings and nickel-based eutectic alloys

Coating systems have been proposed for potential use on eutectic alloy components in high-temperature gas turbine engines. In a study to prevent the deterioration of such systems by diffusion, a tungsten sheet 25 microns thick was placed between eutectic alloys and an Ni-Cr-Al layer. Layered test specimens were aged at 1100 C for as long as 500 h. Without the tungsten barrier the delta phase of the eutectic deteriorated by diffusion of niobium into the Ni-Cr-Al. Insertion of the tungsten barrier stopped the diffusion of niobium from the delta phase. Chromium diffusion from the Ni-Cr-Al into the gamma/gamma-prime phase of the eutectic was greatly reduced by the barrier. However, the barrier thickness decreased with time, and tungsten diffused into both the Ni-Cr-Al and the eutectic. When the delta platelets were aligned parallel rather than perpendicular to the Ni-Cr-Al layer, diffusion into the eutectic was reduced.

Young, S. G.↗

Internal photoemission in Ag-Al2O3-Al junctions

The magnitude of the photon-induced current in Ag-Al2O3-Al metal-oxide-metal junctions has been studied as a function of photon energy and angle of incident radiation. Photocurrents were theoretically analyzed on the basis of a modified vacuum photoemission model (Jain, 1975; Slayman et al., to be published). Optical constants previously reported in the literature (Irani et al., 1971; Ehnrereich et al., 1963) were used to calculate the true spatial generation rate in Ag and Al as a function of the angle, polarization of incident radiation, and film thickness. Results were found to be in very good agreement with experimentally determined values for a tunable dye laser with a KDP doubling crystal pumped by a Q-switched Nd:YAG laser with a LiIO3 doubling crystal. The system provided risetimes of 50 ns or less and peak powers of 10 W. Under short circuit conditions, the photoresponse to incident power was linear up to available power densities of 10 kW/sq cm. Quantum efficiencies of about 0.1% at zero-bias, near 3.8 eV under P polarization, were typically observed.

Guedes, J. M. P.↗

Origin of Ca-Al-rich inclusions. II - Sputtering and collisions in the three-ph8se interstellar medium

The theory put forward by Clayton (1977) for the formation of the Ca-Al-rich inclusions within C3 meteorites is extended to an evolutionary history in a three-phase interstellar medium. Widespread supersonic turbulence in the hot interstellar medium is maintained by supernova shock waves, giving rise to heavy sputtering of the refractory dust. Subsequent reaccumulation with varying dust/gas ratios or varying particle sizes produces isotopically fractionated Ca-Al-rich accumulates. It is thought that the Ca-Al-rich inclusions themselves are formed by the following sequence in the solar system: (1) cold accumulation of larger-than-average Ca-Al-rich particles containing supernova condensate cores into macroscopic (approximately 1 cm) Ca-Al-rich agglomerates, probably by sedimentation; and (2) fusion of the supernova condensates into macroscopic minerals by exothermic chemical reactions that begin when the accumulate has been warmed, thereby releasing energy from the unequilibrated forms accumulated from the interstellar medium.

Clayton, D. D.↗

Al-rich objects in ordinary chondrites - Related origin of carbonaceous and ordinary chondrites and their constituents

A description is given of 169 Al-rich objects (arbitrarily defined as having 10 wt pct or more of Al2O3) from 24 ordinary chondrites of types 3 and 4, five regolith breccias containing unequilibrated material, the unique meteorite Kakangari, and a few ordinary chondrites of types 5 and 6. On the basis of shape and texture, the Al-rich objects are divided into chondrules (round, with igneous textures), irregularly shaped inclusions (similar to type F and spinel-rich complex Ca-Al-rich inclusions), and fragments (probably fragments of Al-rich chondrules and inclusions). For descriptive purposes, the Al-rich chondrules are further subdivided into compositional subgroups, although they are entirely transitional.

Bischoff, A.↗

Bulk compositions of Al-rich chondrules in ordinary and carbonaceous chondrites: Variations and similarities

An extended study of ordinary chondrites revealed that chondrules exist which are transitional in composition between Al-rich and Mg-Fe-rich types in contrast to the finding of Wlotzka, who inferred a gap in compositions between the Ca-Al-rich and Mg-Fe-rich chondrules. Transitional chondrule bulk compositions are plotted. They show that no compositional gap exists between the Mg-Fe-rich and Al-rich chondrules. Chondrules with Na2O-contents 3.0 wt.% are indicated. Variable CaO/Na2O-ratios for chondrule bulk compositions exist, similar to what was described for the subgroups of Al-rich chondrules. Al-rich and transitional chondrules similar to those described above were found also in carbonaceous chrondrites. Thirty-nine chondrules from the carbonaceous chondrites Leoville, Allende, Vigarano and Colony were investigated. Their bulk compositions in terms of Al2O3 vs. CaO were plotted.

Bischoff, A.↗

Bondability of Al-Si thin film in thermosonic gold wire bonding

The bondability of two kinds of Al-Si thin films in thermosonic Au wire bonding was examined by means of microshear tests. One type of film was formed by sputtering an Al-2% Si alloy, and the other was formed by depositing an 0.05 micrometer-thick polysilicon layer on SiO2 by chemical vapor deposition (CVD) and then depositing a 1.2 micrometer-thick Al layer on them by evaporation. After heat-treatment at 450 deg for 30 min., Si in the Al-Si film crystallized. The grain size of the crystallized Si affects the thermosonic wire bondability, i.e., for Al-2% Si sputtered films, good bondability was obtained under relatively small (1.0 micrometer) grain size conditions. In the successive layer process, on the other hand, the grain size of crystallized Si varies with the polysilicon CVD temperature. The optimum CVD temp. was determined from the standpoint of bondability with respect to grain size.

Nakagawa, K.↗

Gamma-ray line emission from Al-26 produced by Wolf-Rayet stars

The recent satellite observations of the 1.8 MeV line from the decay of Al-26 has given a new impetus to the study of the nucleosynthesis of Al-26. The production and ejection of Al-26 by massive mass-losing stars (Of and WR stars) is discussed in the light of recent stellar models. The longitude distribution of the Al-26 gamma ray line emission produced by the galactic collection of WR stars is derived based on various estimates of their radial distribution. This longitude profile provides: (1) a specific signature of massive stars on the background of other potential Al-26 sources, as novae, supernovae, certain red giants and possibly AGB stars; and (2) a possible tool to improve the data analysis of the HEAO 3 and SMM experiments.

Prantzos, N.↗

HEAO 3 discovery of Al-26 in the interstellar medium

A new analysis technique was used with HEAO 3 satellite gamma ray data to quantify the galactic 1809 keV emission. A method of bins was applied in summing for specific scan directions, followed by fitting the source and background components. The 1809 keV line of Al-26 was significant because of the recent discovery that Al-26 was overabundant in meteoritic material and implanted during solar system formation. The HEAO 3 flux indicated a current decay of 3 solar masses of Al-26 per year in the interstellar medium, possibly occurring in red giants and massive main sequence stars. The ratio of the observed Al-26 to the Al-27 flux was similar to that measured in meteorites, which suggests that the ratio is normal for the galactic medium and that no supernova triggered the protosolar nebular collapse.

Mahoney, W. A.↗

Heating and melting of small icy satellites by the decay of Al-26

The effect of radiogenic heating due to Al-26 on the thermal evolution of small icy satellites is studied. The object is to find the extent of internal melting as a function of the satellite radius and of the initial Al-26 abundance. The implicit assumption, based on observations of young stars, is that planet and satellite accretion occurred on a time scale of about 10 to the 6th yr (comparable with the lifetime of Al-26. The icy satellites are modeled as spheres of initially amorphous ice, with chondritic abundances of K-40, Th-232, U-235, and U-238, corresponding to an ice/dust mass ratio of 1. Evolutionary calculations are carried out, spanning 4.5 x 10 to the 9th yr, for different combinations of the two free parameters. Heat transfer by subsolidus convection is neglected for these small satellites. The main conclusion is that the initial Al-26 abundance capable of melting icy bodies of satellite size to a significant extent is more than 10 times lower than that prevailing in the interstellar medium (or that inferred from the Ca-Al rich inclusions of the Allende meteorite, about 7 x 10 to the -7th by mass).

Prialnik, Dina↗

Correlated study of initial Sr-87/Sr-86 and Al-Mg isotopic systematics and petrologic properties in a suite of refractory inclusions from the Allende meteorite

The abundance and the distribution of Al-26, and the initial Sr-87/Sr-86 ratios were determined in a suite of six coarse-grained Ca-Al-rich inclusions from the Allende meteorite, using, respectively, petrographic and chemical characterizations and ion-probe mass spectrometric analyses of the Al-Mg isotopic system, and thermal emission spectrometric analyses of the Rb-Sr system. Results establish a firm association between primitive Al-26/Al-27 and primitive Sr-87/Sr-86 found in each of these inclusions. None of the results required interpretation in terms of heterogeneously distributed Al-26.

Podosek, Frank A.↗

Al-26 and O-16 in the early solar system - Clues from meteoritic Al2O3

The study focuses on 26 Al2O3 grains up to 20 micron in size recovered from the Murchison C2 chrondite. It is observed that Mg-26/Mg-24 ranges up to 56 times the solar system ratio, but the initial Al-26/Al-27 ratios do not exceed the canonical maximum of 0.00005 in other meteoritic samples. It is concluded that this ratio represents the abundance of live Al-26 in the early solar system, not fossil radiogenic Mg-26 surviving from presolar times. The grains are shown to divide into three groups on the basis of Al-26, O-16, Ti, and V content, and distinctive correlations are found for Al-26 and O-16. An origin from at least three discrete components is suggested, two of which contained live Al-26.

Anders, Edward↗