Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADIPIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

90 records · Page 5

Hydrogen Gas-Mediated Deoxydehydration/Hydrogenation of Sugar Acids: Catalytic Conversion of Glucarates to Adipates

The development of a system for the operationally simple, scalable conversion of polyhydroxylated biomass into industrially relevant feedstock chemicals is described. This system includes a bimetallic Pd/Re catalyst in combination with hydrogen gas as a terminal reductant and enables the high-yielding reduction of sugar acids. This procedure has been applied to the synthesis of adipate esters, precursors for the production of Nylon-6,6, in excellent yield from biomass-derived sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photodegradation and Biodegradation Under Thermophile Conditions of Mulching Films Based on Poly(Butylene Adipate-co-Terephthalate) and Its Blend with Poly(Lactic Acid)

Two commercial mulching films based on aliphatic–aromatic copolyesters, poly(butylene adipate-co-terephthalate) (PBAT) and its blend with poly(lactic acid) (PBAT/PLA) were selected to study their photodegradation and their biodegradation under thermophile conditions. The films were buried in an agricultural field and bacteria were isolated from these. Bacterial strains were characterized with a combination of culture-dependent methods and sequencing of part of the 16S ribosomal RNA gene (rDNA). The most prevalent genus isolated was Bacillus and other related genera were found as well. Consortia of the isolated indigenous bacterial strains, IDN-EF and IDN-EC, and an additional consortia that had been previously isolated from exposed polyethylene, Bacillus-MIX, were prepared to perform the biodegradation assay at 45 °C on highly photodegraded films. Changes in the films were studied using chemiluminescence, ATR–FTIR, contact angle, SEM, GPC, DSC and TGA. A biodegradation assay was also performed on the four monomers that constitute the polymers using Bacillus subtilis and Bacillus licheniformis. Mineralization was evaluated by carbon dioxide measurements using an indirect impedance technique. This technique showed that overall there was a higher mineralization for the photodegraded materials. However, the biodegradation was most efficient when B. subtilis was present in the bacterial consortium and especially when the materials had been previously photodegraded.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Renewable unsaturated polyesters from muconic acid

cis,cis -Muconic acid is an unsaturated dicarboxylic acid that can be produced in high yields via biological conversion of sugars and lignin-derived aromatic compounds. Muconic acid is often targeted as an intermediate to direct replacement monomers such as adipic or terephthalic acid. However, the alkene groups in muconic acid provide incentive for its direct use in polymers, for example, in the synthesis of unsaturated polyester resins. Here, biologically derived muconic acid is incorporated into polyesters via condensation polymerization using the homologous series of poly(ethylene succinate), poly(propylene succinate), poly(butylene succinate), and poly(hexylene succinate). Additionally, dimethyl cis,cis -muconate is synthesized and subsequently incorporated into poly(butylene succinate). NMR measurements demonstrate that alkene bonds are present in the polymer backbones. In all cases, the glass transition temperatures are increased whereas the melting and degradation temperatures are decreased. In the case of poly(butylene succinate), utilization of neat muconic acid yields substoichiometric incorporation consistent with a tapered copolymer structure, whereas the muconate diester exhibits stoichiometric incorporation and a random copolymer structure based on thermal and mechanical properties. Prototypical fiberglass panels were produced by infusing a mixture of low molecular weight poly(butylene succinate-co-muconate) and styrene into a woven glass mat and thermally initiating polymerization resulting in thermoset composites with shear moduli in excess of 30 GPa, a value typical of commercial composites. The increased glass transition temperatures with increasing mucconic incorporation leads to improved composites properties. We find that the molecular tunability of poly(butylene succinate-co-muconate) as a tapered or random copolymer enables the tunability of composite properties. Altogether, this study demonstrates the utility of muconic acid as a monomer suitable for direct use in commercial composites.

09 BIOMASS FUELS↗

The behavior of outgassed materials in thermal vacuums

Scientists at the NASA White Sands Test Facility (WSTF) are investigating the relationship between outgassing and condensation for aerospace materials in space-like environments. The WSTF throughput test method was validated by previous testing at WSTF using palmitic acid. Data from these tests were compared with data from other preliminary tests by using adipic and behenic acids. The comparison indicates that surface forces between outgassed molecules and the condensing surfaces cause the condensation flux to be different from the incident flux. These forces can also cause the evaporative flux to be different from the expected value. These discrepancies are discussed in terms of both potential and dynamic interactions of outgassed molecules with surfaces. Although these surface forces are noticeable, their overall effect on the test is minimal.

Mahone, William↗

Aerobic Biodegradation of Aromatic Aliphatic Copolyester Induced by Bacteria Obtained from Different Environments

In this study the biodegradation characteristics of aromatic aliphatic copolyester Ecoflex was assayed with five different bacterial strains isolated from different kinds of environments and living at diverse optimum of temperature. The biodegradation properties of selected strains (Brevibacterium luteolum, Bacillus thuringiensis, Aeromonas media, Geobacillus kaustophilus and Serratia sp.) were assessed through several plate assays oriented to their proteolytic, lipolytic, esterolytic and cellulolytic abilities; catalase activities were measured too. In addition the bacterial hydrolytic abilities for polyhydroxybutyrate, polylactic acid and polybutyrate adipate terephthalate were obtained using specific culture media including also a specific Ecoflex agar. The biodegradation dynamics of selected strains were evaluated mainly by the incubation of Ecoflex foils with a specific bacterium during a period from 3 days until 16 weeks and the change of the degradability of the Ecoflex surface in nitrogen has been assessed by nonisothermal chemiluminescence measurements from 40 to 250 °C. Scanning electron microscope observation of inoculated foils was applied too. The comparison of the results showed the complexity of biodegradation phenomena. The concentration of oxygenated products measured by reached the maximum after 2 weeks of cultivation for strains G. kaustophilus and B. thurigiensis, after 4 weeks of cultivation for strain B. luteolum, and 8 weeks of cultivation for strains Serratia sp. and A. media. Each strain evidenced its own hydrolytic optimum at different periods, but almost all tested strains demonstrated a decline of hydrolysis up to 16 weeks of incubation. This study demonstrated that nonisothermal chemiluminescence examining momentaneous oxidation state of the polymer surface is a valuable technique to follow the biodegradation dynamics on polymeric film, while the Ecoflex agar is able to select useful polymer-degrading bacteria.

36 MATERIALS SCIENCE↗

Depolymerization of polyesters by a binuclear catalyst for plastic recycling

Plastics play an essential role in modern society, however, the relentless growth of their production is threatening both human health and ecosystems. As a result, there are intensive efforts in developing recycling technologies to repurpose waste plastics into the building blocks for valuable materials. Here we show a binuclear complex that can catalyze the degradation of polyethylene terephthalate (PET)-the most widely used polyester globally-and a wide spectrum of other plastics including polylactic acid (PLA), polybutylene adipate terephthalate (PBAT), polycaprolactone (PCL), polyurethane (PU) and Nylon 66. Inspired by hydrolases, the group of enzymes that catalyze bond cleavages with water, the present catalyst design features biomimetic Zn-Zn sites which activate the plastic, stabilize the key intermediate, and enable intramolecular hydrolysis. This synthetic catalyst delivers activities of 36 mg PET d -1 g catal -1 toward PET depolymerization at pH 8 and 40 oC, and of 577 g PET d -1 g catal -1 at pH 13 and 90 oC for scalable PET recycling. We further demonstrate the closed-loop production of a bottle-grade PET. This work presents a practical and viable solution to the sustainable management of plastics waste.

54 ENVIRONMENTAL SCIENCES↗

Enhancing the Melt Strength of Poly(Lactic Acid) via Micro-Crosslinking and Blending with Poly(Butylene Adipate-co-Butylene Terephthalate)for the Preparation of Foams

The melt strength of poly(lactic acid) (PLA) is an important factor in preparing foams and blowing films. Aiming to endow PLA with a suitable melt strength via a slight crosslink, a superficial micro-crosslinking method was introduced in which the PLA feed was mixed with benzoyl peroxide (BPO) and crosslinked in a 100 °C oven for 1 h. Additionally, poly(butyleneadipate-co-terephthalate) (PBAT) was blended with the crosslinked PLA (C-PLA) to further improve melt strength and viscosity. The blend foams were prepared using a single-screw extruder and azodicarbonamide as a foaming agent. The properties were characterized by gel fraction, melt flow rate (MFR), rheometry, DSC and SEM. The rheological results showed that the complex viscosity and storage modulus of C-PLA and C-PLA/PBAT blends increased, attributed to the micro-crosslinking and addition of PBAT and indicating an improvement in melt strength. Furthermore, the crystallization of modified PLA was also enhanced. Compared with pure PLA foams, the C-PLA/PBAT blend foams showed larger cells with more uniform shapes and homogenous distribution. This approach to improve the melt strength of polymers with micro-crosslinking and blending with PBAT represents an attractive method for preparing foams with regular cells.

36 MATERIALS SCIENCE↗

Ice Nucleation and Droplet Formation by Bare and Coated Black Carbon Particles

We have studied the ice formation at heterogeneous and homogeneous temperatures, as well as droplet activation and hygroscopicity of soot particles of variable size and composition. Coatings of adipic, malic, and oleic acid were applied to span a relevant range of solubility, and both uncoated and oleic acid coated soot particles were exposed to ozone to simulate atmospheric oxidation. The results are interpreted in terms of onset ice nucleation with a comparison to a well characterized mineral dust particle that acts as an efficient ice nucleus, as well as particle hygroscopicity. At 253K and 243K, we found no evidence of heterogeneous ice nucleation occurring above the level of detection for our experimental conditions. Above water saturation, droplet formation was observed. At 233K, we observe the occurrence of homogeneous ice nucleation for all particles studied. Coatings also did not significantly alter the ice nucleation behavior of soot particles, but aided in the uptake of water. Hygroscopicity studies confirmed that pure soot particles were hydrophobic, and coated soot particles activated as droplets at high water supersaturations. A small amount of heterogeneous ice nucleation either below the detection limit of our instrument or concurrent with droplet formation and/or homogeneous freezing cannot be precluded, but we are able to set limits for its frequency. We conclude from our studies that both uncoated and coated soot particles are unlikely to contribute to the global budget of heterogeneous ice nuclei at temperatures between 233K and 253K.

58 GEOSCIENCES↗

Mixed polyester recycling can enable a circular plastic economy with environmental benefits

The mixed and varied nature of fossil-based and bio-based plastic waste requires complex and costly separations to enable compatibility with recycling technologies. A circular plastic economy based on mixed polyesters through cleaving ester bonds to produce monomers, while re-utilizing bio-based monomers to produce high-quality sustainable plastics, charts an exciting solution. However, the feasibility of such a circular economy solution remains underexplored. Here, in this study, we conducted a techno-economic analysis and life-cycle assessment of three polyester depolymerization recycling processes-methanolysis, glycolysis, and acid hydrolysis-for a mixed feedstock (polyethylene terephthalate [PET], polylactic acid [PLA], and polybutylene adipate terephthalate [PBAT]). Methanolysis outperforms glycolysis and hydrolysis economically and environmentally due to more efficient downstream separations, generating products with a 31% decrease in selling price and 21%-46% reduction in acidification, carcinogenic toxicity, fossil-fuel depletion, global warming potential, particulate formation, and smog formation compared to conventional polyester manufacturing. This study highlights the viability of a circular plastic economy for mixed polyesters via a single chemical recycling process.

09 BIOMASS FUELS↗

Biodegradation in Soil of PLA/PBAT Blends Compatibilized with Chain Extender

This paper presents a study of biodegradation, in soil, of samples of poly(butylene adipate-co-terephthalate)(PBAT), poly(lactic acid) (PLA) and blends of these materials prepared in torque rheometer with the addition of a chain extender. Film samples of these materials were buried in soil under controlled laboratory conditions. The degraded samples were regularly taken from soil and analyzed by visual inspection, size exclusion chromatography, differential scanning calorimetry and infrared spectroscopy. Respirometry biodegradation tests were conducted to assess samples mineralization degree. Blends showed higher degree of crystallinity compared to pure polymers. Crystallinity degree enhanced during the biodegradation process in all samples, being able to causing the samples to degrade slowly. The study showed the great complexity of the biodegradation process of PLA and PBAT blends when compatibilized with a chain extender. The biodegradation rate showed different results depending on the characteristic applied to evaluate it: visual, molecular weight or mineralization. The chain extender had strong influence in PBAT and blends degradation, slowing the process as observed by the variation of molecular weight and carbonyl index. Blends showed an intermediate behavior compared to the original polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Abiotic Hydrolysis and Compostability of Blends Based on Cassava Starch and Biodegradable Polymers

When associated with polymer blends, starch may improve the biodegradability and compostability of other materials. The objectives of this work were to evaluate the abiotic hydrolysis and the composting process of films obtained from polymer blends between thermoplastic starch (TPS) and three other biodegradable polymers: poly[(butylene adipate)- co -(terephthalate)] (PBAT), poly(lactic acid) (PLA) and polyvinyl alcohol (PVA). PVA/TPS stood out as the most homogeneous blend and the one that showed the highest weight loss, with 46.21% of its initial weight remaining after abiotic hydrolysis tests. On the other hand, PBAT/TPS and PLA/TPS underwent more drastic and rapid degradation during composting in contrast to PVA/TPS. They became very fragmented after 21 days of composting, while the PVA/TPS was visually modified but remained unbroken until day 70. No blend sample exerted negative effects on the quality of the compost.

36 MATERIALS SCIENCE↗

Chemically and mechanically recyclable polyester-based multilayer plastics

Approximately 100 million tons of multilayered plastics (MLPs) are produced each year worldwide but are not recycled due to their complex structure. Here, this work aims to design polyester-based multilayer plastics (80–100 % polyester) that provide barrier performance comparable to typical 9–12-layer commercial MLPs, while also enabling both chemical recycling (back to parent monomer) and mechanical recycling (grind-and-melt reprocessing). Such dual recyclability is not achievable with non-polyester multilayers, such as all-polyolefin systems. Furthermore, we emphasize how the multilayer architecture was tailored to balance barrier properties, mechanical integrity, and end-of-life recyclability for both flexible and rigid packaging applications. Two main categories of polyester-based MLPs are reported; in the first type, poly(butylene adipate-co-terephthalate) (PBAT)-70 % polyglycolic acid (PGA) is used as middle barrier layer, while in second type, middle barrier layer is Ethylene-vinyl alcohol (EVOH) copolymers. Polyethylene terephthalate (PET) was used as a structural layer, while either PBAT or poly(butylene succinate) (PBS) was used to enable thermal sealing and serve as the product contact layer. These MLPs are recycled by both chemical and mechanical recycling processes. Techno-economic analysis (TEA) shows that MLPs incorporating EVOH as barrier layer have similar or lower selling costs (0.32 $\$$/m 2 ) than commercial MLPs. Life cycle assessment (LCA) indicates EVOH-based MLPs have a lower carbon footprint and lower energy consumption relative to commercial MLP benchmarks. This work offers simplified MLPs that are easy to manufacture and ready to recycle, which will significantly reduce environmental impact of MLP packaging while also providing a cost-effective and practical solution for industry.

Barrier properties↗

Interactions of methylamine and ammonia with atmospheric nucleation precursor H{sub 2}SO{sub 4} and common organic acids: Thermodynamics and atmospheric implications

Interactions of the two common atmospheric bases, ammonia (NH{sub 3}) and methylamine MA (CH{sub 3}NH{sub 2}), which are considered to be important stabilizers of binary clusters in the Earth’s atmosphere, with H{sub 2}SO{sub 4}, the key atmospheric precursor, and 14 common atmospheric organic acids (COA) (formic (CH{sub 2}O{sub 2}), acetic (C{sub 2}H{sub 4}O{sub 2}), oxalic (C{sub 2}H{sub 2}O{sub 4}), malonic (C{sub 3}H{sub 4}O{sub 4}), succinic (C{sub 4}H{sub 6}O{sub 4}), glutaric acid (C{sub 5}H{sub 8}O{sub 4}), adipic (C{sub 6}H{sub 10}O{sub 4}), benzoic (C{sub 6}H{sub 5}COOH), phenylacetic (C{sub 6}H{sub 5}CH{sub 2}COOH), pyruvic (C{sub 3}H{sub 4}O{sub 3}), maleic acid (C{sub 4}H{sub 4}O{sub 4}), malic (C{sub 4}H{sub 6}O{sub 5}), tartaric (C{sub 4}H{sub 6}O{sub 6}) and pinonic acid (C{sub 10}H{sub 16}O{sub 3})) have been studied using the composite high-accuracy G3MP2 method. The thermodynamic stability of mixed (COA) (H{sub 2}SO{sub 4}), (COA)(B1) and (COA)(B2) dimers and (COA) (H{sub 2}SO{sub 4}) (B1) and (COA) (H{sub 2}SO{sub 4}) (B1) trimers, where B1 and B2 represent methylamine (CH{sub 3}NH{sub 2}) and ammonia (NH{sub 3}), respectively, have been investigated and their impacts on the thermodynamic stability of clusters containing H{sub 2}SO{sub 4} have been analyzed. It has been shown that in many cases the interactions of H{sub 2}SO{sub 4} with COA, ammonia and methylamine lead to the formation of heteromolecular dimers and trimers, which are certainly more stable than (H{sub 2}SO{sub 4}){sub 2} and (H{sub 2}SO{sub 4}){sub 3}. It has also been found that free energies of (COA) (H{sub 2}SO{sub 4})+ CH{sub 3}NH{sub 2}⇔(COA) (H{sub 2}SO{sub 4})(CH{sub 3}NH{sub 2}) reactions exceed 10-15 kcal mol{sup −1}. This is a clear indication that mixed trimers composed of COA, H{sub 2}SO{sub 4} and methylamine are very stable and can thus serve as possible nucleation sites. The present study leads us to conclude that the interactions of COA coexisting with H{sub 2}SO{sub 4} and common atmospheric bases in the Earth’s atmosphere may be an important factor affecting the stability of nucleating sulfuric acid clusters and that the impacts of COA on atmospheric nucleation should be studied in further details.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Glycerol-based sustainably sourced resin for volumetric printing

Volumetric Additive Manufacturing (VAM) represents a revolutionary advancement in the field of Additive Manufacturing, as it allows for the creation of objects in a single, cohesive process, rather than in a layer-by-layer approach. This innovative technique offers unparalleled design freedom and significantly reduces printing times. A current limitation of VAM is the availability of suitable resins with the required photoreactive chemistry and from sustainable sources. To support the application of this technology, we have developed a sustainable resin based on polyglycerol, a bioderived (e.g., vegetable origin), colourless, and easily functionisable oligomer produced from glycerol. To transform polyglycerol-6 into an acrylate photo-printable resin we adopted a simple, one-step, and scalable synthesis route. Polyglycerol-6-acrylate fulfils all the necessary criteria for volumetric printing (transparency, photo-reactivity, viscosity) and was successfully used to print a variety of models with intricate geometries and good resolution. The waste resin was found to be reusable with minimal performance issues, improving resin utilisation and minimising waste material. Furthermore, by incorporating dopants such as poly(glycerol) adipate acrylate (PGA-A) and 10,12-pentacosadyinoic acid (PCDA), we demonstrated the ability to print objects with a diverse range of functionalities, including temperature sensing probes and a polyester excipient, highlighting the potential applications of these new resins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photochemical Transformation of Poly(butylene adipate- co -terephthalate) and Its Effects on Enzymatic Hydrolyzability

Biodegradable polyesters are being increasingly used to replace conventional, nondegradable polymers in agricultural applications such as plastic film for mulching. For many of these applications, poly(butylene adipate- co -terephthalate) (PBAT) is a promising biodegradable material. However, PBAT is also susceptible to photochemical transformations. To better understand how photochemistry affects the biodegradability of PBAT, in this work we irradiated blown, nonstabilized, transparent PBAT films and studied their enzymatic hydrolysis, which is considered the rate-limiting step in polyester biodegradation. In parallel, we characterized the irradiated PBAT films by dynamic mechanical thermal analysis. The rate of enzymatic PBAT hydrolysis decreased when the density of light-induced cross-links within PBAT exceeded a certain threshold. Mass-spectrometric analysis of the enzymatic hydrolysis products of irradiated PBAT films provided evidence for radical-based cross-linking of two terephthalate units that resulted in the formation of benzophenone-like molecules. In a proof-of-principle experiment, we demonstrated that the addition of photostabilizers to PBAT films mitigated the negative effect of UV irradiation on the enzymatic hydrolyzability of PBAT. This work advances the understanding of light-induced changes on the enzyme-mediated hydrolysis of aliphatic-aromatic polyesters and will therefore have important implications for the development of biodegradable plastics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗