Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “3D atomic level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Lattice vibrations and energy landscape of the isoelectronic semiconductor series CuBr, ZnSe, GaAs, and Ge: The special case of CuBr and its $\mathcal{d}$-level chemistry

Here we have examined the lattice vibrations and the energy landscape of the isoelectronic diamond and zincblende semiconductor series CuBr, ZnSe, GaAs, and Ge. Vibrations are found to be an increasing function of ionicity, with the cation sublattice always vibrating more strongly than the anion sublattice. These findings are consistent with density functional theory (DFT) calculations of the energy landscape and temperature-dependent molecular dynamics simulations of the atomic-position fluctuations. For CuBr, inclusion of the Cu 3d Hubbard U term is found necessary to stabilize the zincblende structure and to bring its vibrational amplitudes into agreement with experiment. In addition, vibrations are found to strongly affect the CuBr near-edge x-ray absorption fine structure that we have successfully modeled by including displacements in our theoretical Bethe-Salpeter equation calculations. Reverse Monte Carlo structural refinements using large atomic configurations to simultaneously fit x-ray absorption and x-ray total-scattering data support these conclusions, and they reveal strong Cu-Br first-neighbor correlations and asymmetric distributions of interatomic distances in the temperature ranges of both negative and positive thermal expansion. Delineation of the CuBr valence band photoelectron spectrum into its Cu 3d and Br 4p states uniquely reveals their covalent mixing and further supports the DFT results.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Precise ${dd}$ excitations and commensurate intersite Coulomb interactions in the dissimilar cuprates YBa 2 Cu 3 O 7–y and La 2–x Sr x CuO 4

Using high-resolution extreme ultraviolet resonant inelastic X-ray scattering (EUVRIXS) spectroscopy at Cu M-edge, we observed the doping dependent spectral shifts of inter-orbital (${dd}$) excitations of YBa 2 Cu 3 O 7-y and La 2-x Sr x CuO 4 . With increasing hole doping level from undoped to optimally doped superconducting compositions, the leading edge of ${dd}$ excitations is found to shift towards lower energy loss in a roughly linear trend that is irrespective to the cuprate species. The magnitude of energy shift can be explained by including a 0.15 eV Coulomb attraction between Cu 3d(x 2 -y 2 ) electrons and the doped holes on the surrounding oxygens in the atomic multiplet calculations. Finally, the consistent energy shift between distinct cuprate families suggests that this inter-site Coulomb interaction energy scale is relatively material-independent, and provides an important reference point for understanding charge density wave phenomena in the cuprate phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1986

The importance of atomic and molecular correlation on the bonding in transition metal compounds

The determination of accurate spectroscopic parameters for molecular systems containing transition metal atoms is shown to require extensive data sets and a high level correlation treatment, and techniques and their limitations are considered. Extensive results reported on the transition metal atoms, hydrides, oxides, and dimers makes possible the design of a calculation to correctly describe the mixing of different atomic asymptotes, and to give a correct balance between molecular bonding and exchange interactions. Examples considered include the dipole moment of the 2Delta state of NiH, which can help determine the mixture of 3d(8)4s(2) and 3d(9)4s(1) in the NiH wavefunction, and the bonding in CrO, where an equivalent description of the relative energies associated with the Cr 3d-3d atomic exchange and the Cr-O bond is important.

Bauschlicher, Charles W., Jr.↗
DOE OSTI2022

Effect of Delta and Omicron Mutations on the RBD-SD1 Domain of the Spike Protein in SARS-CoV-2 and the Omicron Mutations on RBD-ACE2 Interface Complex

The receptor-binding domain (RBD) is the essential part in the Spike-protein (S-protein) of SARS-CoV-2 virus that directly binds to the human ACE2 receptor, making it a key target for many vaccines and therapies. Therefore, any mutations at this domain could affect the efficacy of these treatments as well as the viral-cell entry mechanism. We introduce ab initio DFT-based computational study that mainly focuses on two parts: (1) Mutations effects of both Delta and Omicron variants in the RBD-SD1 domain. (2) Impact of Omicron RBD mutations on the structure and properties of the RBD-ACE2 interface system. The in-depth analysis is based on the novel concept of amino acid-amino acid bond pair units (AABPU) that reveal the differences between the Delta and/or Omicron mutations and its corresponding wild-type strain in terms of the role played by non-local amino acid interactions, their 3D shapes and sizes, as well as contribution to hydrogen bonding and partial charge distributions. Our results also show that the interaction of Omicron RBD with ACE2 significantly increased its bonding between amino acids at the interface providing information on the implications of penetration of S-protein into ACE2, and thus offering a possible explanation for its high infectivity. Our findings enable us to present, in more conspicuous atomic level detail, the effect of specific mutations that may help in predicting and/or mitigating the next variant of concern.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Determination of the mutual orientation between proton CSA tensors mediated through band-selective 1 H– 1 H recoupling under fast MAS

We report the mutual orientation of nuclear spin interaction tensors provides critical information on the conformation and arrangement of molecules in chemicals, materials, and biological systems at an atomic level. Proton is a ubiquitous and important element in a variety of substances, and its NMR is highly sensitive due to their virtually 100% natural abundance and large gyromagnetic ratio. Nevertheless, the measurement of mutual orientation between the 1 H CSA tensors has remained largely untouched in the past due to strong 1 H– 1 H homonuclear interactions in a dense network of protons. In this study, we have developed a proton-detected 3D 1 H CSA/ 1 H CSA/ 1 H CS correlation method that utilizes three techniques to manage homonuclear interactions, namely fast magic-angle spinning, windowless C-symmetry-based CSA recoupling (windowless-ROCSA), and a band-selective 1 H– 1 H polarization transfer. The asymmetric 1 H CSA/ 1 H CSA correlated powder patterns produced by the C-symmetry-based methods are highly sensitive to the sign and asymmetry parameter of the 1 H CSA, and the Euler angle β as compared to the symmetric pattern obtained by the existing γ-encoded R-symmetry-based CSA/CSA correlation methods and allows a larger spectral area for data fitting. These features are beneficial for determining the mutual orientation between the nuclear spin interaction tensors with improved accuracy.

1H CSA↗
DOE OSTI2022

Ultrafast visualization of incipient plasticity in dynamically compressed matter

Plasticity is ubiquitous and plays a critical role in material deformation and damage; it inherently involves the atomistic length scale and picosecond time scale. A fundamental understanding of the elastic-plastic deformation transition, in particular, incipient plasticity, has been a grand challenge in high-pressure and high-strain-rate environments, impeded largely by experimental limitations on spatial and temporal resolution. Here, we report femtosecond MeV electron diffraction measurements visualizing the three-dimensional (3D) response of single-crystal aluminum to the ultrafast laser-induced compression. We capture lattice transitioning from a purely elastic to a plastically relaxed state within 5 ps, after reaching an elastic limit of ~25 GPa. Our results allow the direct determination of dislocation nucleation and transport that constitute the underlying defect kinetics of incipient plasticity. Large-scale molecular dynamics simulations show good agreement with the experiment and provide an atomic-level description of the dislocation-mediated plasticity.

36 MATERIALS SCIENCE↗
NASA NTRS2001

Resonance Scattering of Fe XVII X-Ray and EUV Lines

Over the years a number of calculations have been carried out to derive intensities of various X-ray and EUV lines in Fe XVII to compare with observed spectra. The predicted intensities have not agreed with solar observations, particularly for the line at 15.02 Angstroms; resonance scattering has been suggested as the source for much of the disagreement. The atomic data calculated earlier used seven configurations, 2s(sup 2) 2p(sup 6),2s(sup 2) 2p(sup 5)3s, 2s(sup 2) 2p(sup 5)3p, 2s(sup 2)2p(sup 5)3d, 2s2 p(sup 6)3s, 2s2p(sup 6)3p, and 2s2p(sup 6)3d, having n=3 orbitals and the scattering calculations in the distorted wave approximation were carried out only for incident energies above the threshold of the highest fine-structure level. These calculations have now been extended to thirteen configurations by adding six more configurations having n=4 orbitals, namely 2s(sup 2) 2p(sup 5)4s, 2s(sup 2) 2p(sup 5)4p, 2s(sup 2) 2p(sup 5)4d, 2s2p(sup 6)4s, 2s2p(sup 6)4p, and 2s2p(sup 6)4d, giving rise to 73 fine structure levels. The scattering calculations are carried out below as well as above the threshold of the highest fine-structure level. The incident energies below the threshold are 55.8, 65, 70, and 76 Ry and those above are 85, 127.5, 170, 212.5, 255, 340, and 425 Ry. The collision strengths are calculated up to total angular momentum L(sup T) = 33. Level populations and intensity ratios are calculated at various electron temperatures and densities. It is not possible to predict how the ratios would change when configurations with n=5 and 6 orbitals are added but some estimates have been made for a few transitions by Liedhal, who indicates an asymptotic convergence when n=5 and 6 orbitals are added. These improved calculations of Fe XVII change the intensity ratios compared to those obtained earlier, bringing the optically thin F(15.02)/F(16.78) ratio and several other ratios closer to the observed values: However, some disagreement with the solar observations still persists, even though the agreement of the presently calculated optically thin F(15.02)/F(15.26) ratio with the experimental results of Brown et al. and Laming et al. has improved. Some of the remaining discrepancy is still thought to be the effect of opacity, which is consistent with expected physical conditions for solar sources. EUV intensity ratios are also calculated and compared with observations. Level populations and intensity ratios are calculated, as a function of column density of Fe XVII, in the slab and cylindrical geometries. As found previously, the predicted intensities for the resonance lines at 15.02 and 15.26 Angstroms exhibit initial increases in flux relative to the forbidden line at 17.10 Angstroms and the resonance line at 16.78 Angstroms as optical thickness increases. The same behavior is predicted for the lines at 12.262 and 12.122 Angstroms. Predicted intensities for some of the allowed EUV lines are also affected by opacity.

Bhatia, A. K.↗
DOE OSTI2024

A platform for non-local thermodynamic equilibrium atomic physics research using the buried layer target approach at a kJ level laser facility

Here we present a design and first use of a kJ level laser facility for research of non-local thermodynamic equilibrium atomic physics using the buried layer target method. The target design included a metal layer buried inside a plastic tamper with thicknesses tailored to the expected laser intensities. The target was illuminated from each side by two laser beams with intensities of 0.5–5 × 10 14 W/cm 2 . The advanced diagnostic suite included static and time-resolved imagers and spectrometers with various spectral resolutions. A 3D printed dual elliptically curved spectrometer is presented, and its results are compared to a traditional crystal spectrometer. Experimental results and radiation hydrodynamic simulations demonstrate that the target achieved the desired thermodynamic conditions of n e ≈ 10 21 –10 22 cm -3 and T e ≈ 1–2 keV.

3D printing↗
DOE OSTI2021

Auger electron angular distributions following excitation or ionization from the Xe 3d and F 1s levels in xenon difluoride

Linearly polarized synchrotron radiation has been used to record polarization dependent, non-resonant Auger electron spectra of XeF 2 , encompassing the bands due to the xenon M 45 N 1 N 45 , M 45 N 23 N 45 , M 45 N 45 N 45 and M 45 N 45 V and fluorine KVV transitions. Resonantly excited Auger spectra have been measured at photon energies coinciding with the Xe 3d 5/2 → σ* and the overlapped Xe 3d 3/2 /F 1s → σ* excitations in XeF 2 . The non-resonant and resonantly excited spectra have enabled the Auger electron angular distributions, as characterized by the β A parameter, to be determined for the M 45 N 45 N 45 transitions. In the photon energy range over which the Auger electron angular distributions were measured, theoretical results indicate that transitions into the εf continuum channel dominate the Xe 3d photoionization in XeF 2 . In this limit, the theoretical value of the atomic alignment parameter (A 20 ) characterizing the core ionized state becomes constant. This theoretical value has been used to obtain the Auger electron intrinsic anisotropy parameters (α 2 ) from the β A parameters extracted from our non-resonant Auger spectra. For a particular Auger transition, the electron kinetic energy measured in the resonantly excited spectrum is higher than that in the directly ionized spectrum, due to the screening provided by the electron promoted into the σ* orbital. The interpretation of the F KVV Auger band in XeF 2 has been discussed in relation to previously published one-site populations of the doubly charged ions (XeF 2 2+ ). Here, the experimental results show that the ionization energies of the doubly charged states predominantly populated in the decay of a vacancy in the F 1s orbital in XeF 2 tend to be higher than those populated in the decay of a vacancy in the Xe 4d level in XeF 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bond-dependent anisotropy and magnon decay in cobalt-based Kitaev triangular antiferromagnet

Following tremendous success of the graphene-derived fundamental and applied research, the magnetic van der Waals materials that can be cleaved into monolayer two-dimensional atomic crystals have emerged as a new platform in the studies of low-dimensional physics and in the design of artificial heterostructures with novel properties. Because of that, the family of dihalides and trihalides of the 3d transition group receive a strong renewed interest. Together with our experimental collaborators, we have investigated the novel dynamical properties of one of such promising material CoI 2 , and demonstrated that spin excitations in it are prone to substantial breakdown and complex level repulsion, the important quantum effects whose theoretical understanding has been significantly advanced by our group in the last two decades. Both phenomena are dramatically revealed by experiments and verified by the theory in our joint study, published in Nature Physics. Altogether, our results pave the way toward a new research direction for the magnetic van der Waals materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Discovering invariant spatial features in electron energy loss spectroscopy images on the mesoscopic and atomic levels

Over the last two decades, Electron Energy Loss Spectroscopy (EELS) imaging with a scanning transmission electron microscope has emerged as a technique of choice for visualizing complex chemical, electronic, plasmonic, and phononic phenomena in complex materials and structures. The availability of the EELS data necessitates the development of methods to analyze multidimensional data sets with complex spatial and energy structures. Traditionally, the analysis of these data sets has been based on analysis of individual spectra, one at a time, whereas the spatial structure and correlations between individual spatial pixels containing the relevant information of the physics of underpinning processes have generally been ignored and analyzed only via the visualization as 2D maps. Here, we develop a machine learning-based approach and workflows for the analysis of spatial structures in 3D EELS data sets using a combination of dimensionality reduction and multichannel rotationally invariant variational autoencoders. This approach is illustrated for the analysis of both the plasmonic phenomena in a system of nanowires and in the core excitations in functional oxides using low loss and core-loss EELS, respectively. The code developed in this manuscript is open sourced and freely available and provided as a Jupyter notebook for the interested reader.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Decoding Active Sites for Highly Efficient Semihydrogenation of Acetylene in Palladium–Copper Nanoalloys

Accurately decoding the three-dimensional atomic structure of surface active sites is essential yet challenging for a rational catalyst design. Here, we used comprehensive techniques combining the pair distribution function and reverse Monte Carlo simulation to reveal the surficial distribution of Pd active sites and adjacent coordination environment in palladium-copper nanoalloys. After the fine-tuning of the atomic arrangement, excellent catalytic performance with 98% ethylene selectivity at complete acetylene conversion was obtained in the Pd 34 Cu 66 nanocatalysts, outperforming most of the reported advanced catalysts. Further, t he quantitative deciphering shows a large number of active sites with a Pd-Pd coordination number of 3 distributed on the surface of Pd 34 Cu 66 nanoalloys, which play a decisive role in highly efficient semihydrogenation. This finding not only opens the way for guiding the precise design of bimetal nanocatalysts from atomic-level insight but also provides a method to resolve the spatial structure of active sites.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Predictive Modeling of Electrodeposition in a Single Pore Flow-Through Electrode: From Electronucleation to Coating Thickness Uniformity

The emergence of advanced manufacturing methods capable of producing porous three-dimensional structures has expanded the design space for next-generation functional components. The ability to fabricate ordered 3D foams for use in electrocatalysis reactors has increased the need for controlled deposition of catalytic metals onto porous support materials, such as carbon. However, there is a lack of clear design guidelines for electrodeposition onto 3D substrates, due to the geometric complexity and multi-scale nature of the problem. Furthermore, electro-nucleation phenomena are often overlooked in macro-scale models of current distribution during deposition. Here, a graphite flow-through electrode (FTE) is used as a model system for copper deposition within a single pore. Potential distributions and electro-nucleation phenomena are coupled in a continuum level model by incorporating nucleation size and density as a function of overpotential, determined experimentally using in situ atomic force microscopy (AFM). The model predictions are validated by measuring the coating uniformity in the pore using micro-computed X-ray tomography (μCT). A scaling analysis comprising dimensionless parameters such as the Wagner number is presented. The simplified scaling relationship framework can guide the electrodeposition process and electrode design to optimize plating of porous substrates under fluid flow conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

In-situ and wavelength-dependent photocatalytic strain evolution of a single Au nanoparticle on a TiO 2 film

Photocatalysis is a promising technique due to its capacity to efficiently harvest solar energy and its potential to address the global energy crisis. However, the structure–activity relationships of photocatalyst during wavelength-dependent photocatalytic reactions remains largely unexplored because it is difficult to measure under operating conditions. Here we show the photocatalytic strain evolution of a single Au nanoparticle (AuNP) supported on a TiO 2 film by combining three-dimensional (3D) Bragg coherent X-ray diffraction imaging with an external light source. The wavelength-dependent generation of reactive oxygen species (ROS) has significant effects on the structural deformation of the AuNP, leading to its strain evolution. Density functional theory (DFT) calculations are employed to rationalize the induced strain caused by the adsorption of ROS on the AuNP surface. These observations provide insights of how the photocatalytic activity impacts on the structural deformation of AuNP, contributing to the general understanding of the atomic-level catalytic adsorption process.

14 SOLAR ENERGY↗
NASA NTRS1995

The Low-Lying Electronic States of LiB

The spectroscopic constants for the triplet and singlet states of LiB below about 30 000/ cm are determined using an internally contracted multireference configuration interaction approach in conjunction with [6s 5p 3d 2f] atomic natural orbital basis sets. The ground state is (sup 3)Pi as found in previous work. No excited triplet states are found to be ideal for characterizing the ground state; the (1)(sup 3)Sigma(sup -) state has a transition energy that is too small for many experimental approaches and the (2)(sup 3)Pi and (3)(sup 3)Pi states have bond lengths that are significantly longer than the ground state, resulting in transition intensities that are spread out over many vibrational levels of the ground state.

Ricca, Alessandra↗
NASA NTRS1986

Theoretical studies of diatomic and triatomic systems containing the group IB atoms Cu, Ag, and Au

Selected portions of the ground state potential energy surfaces of the Cu3, Ag3, AgCu2, and AuCu2 trimers are studied at the single-reference singles plus doubles configuration interaction and couple pair functional levels correlating 33 electrons. The calculations use the effective core potentials of Hay and Wadt (1985) to replace the deep core levels. The Cu3 and Ag3 molecules are found to have 2B2 obtuse-angled ground states, with low-lying 2A1 acute-angled excited states. The AgCu2 and AuCu2 molecules have 2A1 acute-angled ground states. The Cu3 molecule has a smaller 3d population than Ag3, and Cu3 has a smaller s electron density in the open-shell orbital than does Ag3, in agreement with recent ESR experiments.

Walch, Stephen P.↗
DOE OSTI2023

High-temperature ferromagnetism in Cr 1+x Pt 5-x P

In this work, we present the growth and basic magnetic and transport properties of Cr 1+x Pt 5-x P. We show that single crystals can readily be grown from a high-temperature solution created by adding dilute quantities of Cr to Pt-P based melts. Like other 1-5-1 compounds, Cr 1+x Pt 5-x P adopts a tetragonal P4/mmm, structure composed facesharing CrPts like slabs that are broken up along the c-axis by sheets of P atoms. EDS and X-ray diffraction measurements both suggest Cr 1+x Pt 5-x P has mixed occupancy between Cr and Pt atoms, similar to what is found in the closely related compound CrPtg, giving real compositions of Cr 1.5 Pt 4.5 P (x = 0.5). We report that Cr 1.5 Pt 4.5 P orders ferromagnetically at T c = 464.5 K with a saturated moment of ≈ 2.1 μs/Cr at 1.8 K. Likely owing to the strong spin-orbit coupling associated with the large quantity of high Z, Pt atoms, Cr 1.5 Pt 4.5 P has exceptionally strong planar anisotropy with estimated anisotropy fields of 345 kOe and 220 kOe at 1.8 K and 300 K respectively. The resistance of Cr 1.5 Pt 4.5 P has a metallic temperature dependence with relatively weak magnetoresistance. Electronic band structure calculations show that CrPt 5 P has a large peak in the density of states near the Fermi level which is split into spin majority and minority bands in the ferromagnetic state. Furthermore, the calculations suggest substantial hybridization between Cr-3d and Pt-5d states near the Fermi level, in agreement with the experimentally measured anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2024

On the origin of magnetic anisotropy in 4f-free ferromagnets based on the CaCu 5 structure *

Using first-principles calculations, we investigate the origin of magnetocrystalline anisotropy in a series of 4f-electron-free intermetallics with CaCu 5 -based structures: YCo 5 , YCo 4 B, and Y 3 Co 13 B 2 . The electronic structure of these compounds is characterized by a set of narrow 3d bands near the Fermi level. In YCo 5 the easy-axis anisotropy originates primarily in the spin–orbit coupling-induced mixing of the electronic states with Co d x 2 -y 2 and d xy character. The analysis of k-resolved anisotropy shows that positive contributions accumulate from the entire Brillouin zone but are particularly large near the k z = 0 plane. The analysis of the single-site and two-site terms reveals a large positive single-site contribution to the magnetocrystalline anisotropy from the Co atoms on the honeycomb sublattice, along with two-site contributions from both honeycomb and kagome sublattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗