Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wetting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Rapid and high-throughput determination of sorghum ( Sorghum bicolor ) biomass composition using near infrared spectroscopy and chemometrics

Compositional characterization of biomass is vital for the biofuel industry. Traditional wet chemistry-based methods for analyzing biomass composition are laborious, time-consuming, and require extensive use of chemical reagents as well as highly skilled personnel. In this study, near-infrared (NIR) spectroscopy was used to quickly assess the composition of above-ground vegetative biomass from 113 diverse, photoperiod-sensitive, biomass-type sorghum (Sorghum bicolor) accessions cultivated under field conditions in Central Illinois. Biomass samples were analyzed using NIR spectra collected in the spectral range of 867–2536 nm, with their chemical compositions determined following the National Renewable Energy Laboratory (NREL) protocol. Advanced spectral pre-treatment and band selection techniques were utilized to develop calibration models using partial least squares regression (PLSR). The models’ effectiveness was assessed through cross-validation and independent data tests. The predictions for moisture, ash, extractives, glucan, xylan, acid-soluble lignin (ASL), acid-insoluble lignin (AIL), and total lignin were accurate and reliable, demonstrating the capability of NIR spectroscopy to provide rapid and precise characterization of sorghum biomass. The results demonstrated that NIR spectroscopy is an efficient tool for rapidly characterizing sorghum biomass, making it a sustainable option for screening desirable feedstock for biofuel or bioproduct production.

09 BIOMASS FUELS↗
DOE OSTI2025

Unlocking the biofuel power of cover crop in Washington State: Enhancing potential through hydrothermal liquefaction

This study evaluates cover crops in Washington State (WA) as a renewable feedstock for hydrothermal liquefaction (HTL), supported by techno-economic (TEA) and life cycle (LCA) analysis. In the Pacific Northwest, fallow land is the common winter practice, generating no income for farmers. Over three years, field trials at two representative sites—Puyallup (cool, wet) and Othello (irrigated, no-till)tested triticale, hairy vetch, crimson clover, winter pea, and fava bean preceding cash crops. Biomass yields, composition, soil impacts, and net revenue were assessed across removal treatments. HTL conversion produced 32–37 wt% biocrude, lower than 48 wt% for sewage sludge, with modeled cradle-to-grave carbon intensities of 26–31 g CO 2 e/MJ and minimum fuel selling prices (MFSP) of $\$$6.75–$\$$7.18 per gallon gasoline equivalent (GGE), comparable to other lignocellulosic feedstocks. No significant changes were observed in soil carbon, nitrogen, or subsequent cash crop yields after cover crop removal. Farmer profitability was possible, particularly for triticale and hairy vetch at $\$$60 per dry ton. To address seasonal variability, blending with wastewater sludge was evaluated. All scenarios delivered >70 % carbon intensity reductions relative to fossil fuels, and with Renewable Identification Number (RIN) credits, MFSPs below $\$$2.5 GGE were achievable. These results demonstrate that cover crops can generate new revenue streams for farmers while serving as a flexible, low-carbon feedstock. Integrating cover crops with waste biomass offers a practical pathway to expand the bioeconomy and support year-round renewable fuel production.

Biofuels↗
DOE OSTI2025

Near-infrared spectroscopy as a green analytical tool for sustainable biomass characterization for biofuels and bioproducts: An overview

Biomass, a widely used renewable energy source, requires characterization to optimize biofuel and bioproduct processes, customize feedstocks, and ensure economic and environmental sustainability. Conventional wet-chemistry methods for biomass analysis are slow, expensive, and require significant reagents and skilled personnel. In contrast, near-infrared (NIR) spectroscopy, a faster, cost-effective, and reagent-free green technology, enables non-destructive biomass analysis with minimal sample preparation. This study provides an overview of the fundamentals of NIR spectroscopy and explores its recent applications for analyzing various biomass properties important to the biofuel and bioproduct industry. The study also critically evaluates the challenges and opportunities of using NIR spectroscopy for biomass analysis. This review aims to guide future research for rapid and high throughput characterization of biomass in the biomass industry, supporting the United Nations’ sustainable development goal (SDG) 7: producing affordable and sustainable energy.

Biofuels↗
DOE OSTI2024

Chemical changes from N-doped graphene and Metal-Organic Frameworks to N-G/MOF composites for improved electrocatalytic activity

Integrating N doped graphene (N G) with Metal Organic Frameworks (MOFs) enhances catalytic activity for oxygen reduction reaction (ORR), often exceeding both the performances of their precursors and, in some cases, even PGM based catalysts. However, the factors driving this improved catalytic activity in N G/MOF composites remain unexplored, particularly from the perspective of the chemical changes. To investigate the chemical changes in N G and MOF upon their integration and the implications of these changes on ORR catalytic activity, an N G/MOF was synthesized from N G with a MOF (ZIF 8) following a mechanochemical wet ball milling process. The N G, ZIF 8, and N G/MOF samples were examined for changes in elemental composition, chemical state of carbon, different nitrogen and carbon bonds, and other chemical interactions. In the N G/MOF catalyst, compared to its N G and ZIF 8 precursors, the relative oxygen content increased, indicating the formation of additional oxygen containing groups. The C 1s peak shifted to a lower binding energy in N G/MOF, suggesting changes in the overall chemical or oxidation state of the carbon atoms. Besides, the increase in pyridinic N functional groups in N G/MOF points to the formation of additional active sites. Furthermore, the formation of C Zn bonds in N G/MOF suggests the probable emergence of single atom Zn sites, while the increase in C=O bonds points to the formation of carboxyl or carbonyl groups. These chemical changes could be linked to the enhanced electrocatalytic activity of the N G/MOF composite for ORR. In conclusion, this study may also be beneficial for other research focused on developing composite catalysts involving various N G and MOF materials.

25 ENERGY STORAGE↗
DOE OSTI2023

The role of oak species in long-term soil P loss in a humid river bottomland

There is a gap in our understanding of if and how bottomland forest type will affect long-term nutrient cycling and loss. This study aims to determine how different forests affect soil hydrologic variability and whole-soil P loss in a humid-subtropical setting. Here, we used replicate-sampling and measured soil physical, chemical, and mineralogical properties at 12 sites in two forest ecosystems, post oak (Quercus stellata) and cherry bark oak (Quercus pagoda) in Clarks River National Wildlife Refuge in Western Kentucky. We hypothesize that wetting–drying events in redox soils of forested bottomlands can cause positive feedback in whole-soil P loss. Trees with greater P demand (e.g., post oak) take up more water creating more frequent and pronounced episodes in swelling and shrinking of expandable clays. Repeated swelling and shrinking of clays occlude the surface of Fe-Mn oxides from further adsorption of P in acidic soil. This can lead to greater loss or plant uptake of available P. Our results show (i) a significant difference in mean whole-soil P loss between the oak species with more loss in soils underlying the post oak forest, and (ii) a difference in the total P found in the sap- and heartwood of the two oak species. Soil analysis reveals that the clay mineralogy of the post and cherry bark oak sites are similar, and thus, may only play a minor role in governing the whole-soil P loss difference. However, the leaf data analysis suggests that the post oak site could be P and nitrogen-limited, while the cherry bark is only nitrogen limited. Our study shows that differences in the oak forest ecosystem may affect the long-term balance in water and nutrient uptake and may alter the redistribution of nutrients in the canopy and the underlying soils.

58 GEOSCIENCES↗
DOE OSTI2021

A novel semi-structured kinetic model of methanotroph-photoautotroph cocultures for biogas conversion

Through metabolic coupling of methane oxidation and oxygenic photosynthesis, methanotroph-photoautotroph (M-P) cocultures offer a highly promising technology platform for biogas conversion. However, there has not been any quantitative modeling of the coculture growth kinetics. This is mainly due to the inherent difficulty associated with real time characterization of the M-P cocultures and the complex interactions such as the cross-feeding mechanism within the coculture. To address this challenge, we recently developed a novel experimental-computational (E-C) protocol to accurately characterize the M-P coculture in real-time, and validated its accuracy through cell counting. Enabled by the E-C protocol, this work presents the very first kinetic model for M-P cocultures. By explicitly modeling the exchange of in situ produced O 2 /CO 2 within the M-P coculture and coupling the individual biomass growth with mass transfer between the gas and liquid phases, the semi-structured kinetic model accurately predicts the growth dynamics of the M-P coculture under a wide range of growth conditions. The proposed model is validated by a series of wet-lab experiments using Methylomicrobium buryatense 5GB1 - Arthrospira platensis as the model coculture. Although it has been speculated that there may exist other emergent metabolic interactions within the M-P coculture, in addition to the exchange of in situ produced O 2 /CO 2 , there has not been any experimental validation prior to this study. By integrating designed experiments with the semi-structured kinetic model, this study is the first to confirm the existence of the additional emergent metabolic exchanges within the coculture. Furthermore, this study further quantifies the effect of these unknown metabolic interactions on the growth of both species in the model coculture, supporting further research to identify these exchanged metabolites for metabolic engineering.

42 ENGINEERING↗
DOE OSTI2022

The effect of silica oxide support on the catalytic activity of nickel-molybdenum bimetallic catalyst toward ethanol steam reforming for hydrogen production

This work investigates the effects of molybdenum promoter and silica oxide (SiO 2 ) support morphology on the ethanol steam reforming (ESR) performance of Nickel-Molybdenum (NiMo) bimetallic catalysts. Ordered mesoporous SiO 2 (SBA-15) and commercial SiO 2 supports were used as the oxide support materials. The synthesized catalysts were prepared via the wet impregnation method and characterized via XRD, H 2 -TPR, BET, FTIR, and Raman techniques. This study shows that NiMo bimetallic catalyst supported on SBA-15 has superior catalytic activity and better coking resistance at an intermediate temperature of 600 ⁰C than commercial SiO 2 supported catalysts. The presence of a uniform mesoporous structure of SBA-15 with an average pore diameter of ~ 2 nm can obstruct the carbon formation, leading to improved coking resistance. The catalytic enhancement of NiMo bimetallic catalysts toward ESR can also be linked to the ability of Mo promoter in enhancing the interaction between NiMo nanoparticles and SiO 2 support materials and restraining agglomeration of Ni nanoparticles, which results in further improvement of NiMo nanoparticle dispersion and inhibit its sintering. The NiMo bimetallic catalysts supported on SBA-15 illustrated the high H 2 yield of ~ 54% and carbon conversion of ~ 89% with the excellent stability for ESR performed at 600 ⁰C and the steam-to-carbon ratio of 2 over 65 hours.

25 ENERGY STORAGE↗
DOE OSTI2022

Accuracy of predictions made by machine learned models for biocrude yields obtained from hydrothermal liquefaction of organic wastes

Hydrothermal liquefaction (HTL) has potential for converting abundant wet organic wastes into renewable fuels. Because HTL consists of a complex reaction network, deterministic, physics-based prediction of its biocrude yield is prohibitively difficult. Data-driven methods provide an alternative to the physics-based approach; however, rigorous testing must be performed to ensure the accuracy of predictions made by data-driven methods. To this end, a data set was assembled consisting of 570 data points appearing in the open literature. The data set was divided into training, validation, and test sub-sets and used for evaluating different machine learning regression approaches to predict biocrude yield. Among the tested algorithms, Random Forest and eXtreme Gradient Boosting (XGBoost) predicted biocrude yields in a test set that had not been used for training with the greatest accuracy, with root mean square errors (RMSE) of 8.34 and 8.57, respectively. Further refinement of the Random Forest model reduced its RMSE to 8.07. In comparison, predictions of a series of literature models resulted in RMSE ranging from 9.16 in the most accurate case to 27.6 in the least accurate; most literature models yielded RMSE values > 10. Using biocrude yield predictions from the most accurate Random Forest model and a probabilistic economic analysis found that the model accuracy is sufficient to prioritize allocation of resources based on projected minimum fuel selling price. In our report the models and analysis represent a major advance in the ability to use readily available data to predict biocrude yields on new feedstocks that have not previously been studied.

42 ENGINEERING↗
DOE OSTI2025

Countercurrent flow characteristics of next generation solvent in novel 3D printed columns for carbon capture

Solvent based absorption for carbon dioxide capture in a packed column is being considered as an efficient technology for the decarbonization process of point source. Significant efforts are underway to improve the design of packings with the cutting edge 3D printing technology for efficient carbon capture. Accordingly, multiphase flow studies were conducted to assess the performance of novel 3D printed columns with various triply periodic minimal surface (TPMS) designs. The effects of solvent properties, liquid and gas loads on the performance of TPMS columns are extensively explored. Hydrodynamics of the potential water-lean solvents (EEMPA) as well as aqueous monoethanolamine (MEA) solvent for carbon capture are evaluated and compared. The interfacial area and liquid holdup increase with increasing liquid loads (q L ) for TPMS columns. Schwarz column consistently shows the highest liquid holdup value. The EEMPA exhibits higher values for the interfacial area (10–15 %) and liquid holdup (~4 %) in comparison to the MEA. TPMS columns exhibit the intermediate value of dry pressure drop between the random and the structure packed columns. Among selected TPMS columns, the gyroid packing shows the lowest pressure drop. The gas load has marginal impact on the interfacial area at lower value while a higher gas load leads to column’s flooding. Prior to the flooding, the interfacial area in TMPS packings rises with increased gas load at a fixed liquid load except Schwarz packing where interfacial area is incentive to the gas load. Additionally, the liquid holdup and wet pressure drop rise as gas load increases in TPMS columns. Overall, Fisher Koch packing is more susceptible to flood as compared to other TPMS packings. Flow regimes: loading and flooding are also delineated in the TPMS packings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Improving anaerobic digestion of sewage sludge to renewable natural gas by the Advanced Pretreatment & Anaerobic Digestion technology (APAD): Pilot testing

Conventional anaerobic digestion (AD) of sewage sludge in wastewater treatment facilities suffers from low carbon conversion efficiency (CCE = 40%) and requires costly CO2 removal for injection of the produced CH4 into the natural gas grid. To address these limitations, we developed the Advanced Pretreatment and Anaerobic Digestion (APAD) process. This integrates Advanced Wet Oxidation & Steam Explosion (AWOEx) pretreatment of residual sludge after conventional AD, followed by biogas upgradation using a novel methanogenic strain, Methanothermobacter wolfeii BSEL, converting CO2 with H2 into CH4 or RNG (renewable natural gas). Pilot-scale results demonstrated that AWOEx pretreatment achieved a CCE of 62% for the residual sludge, 68% higher than the conventional AD process. The CH4 production was further increased by 79%. Subsequent biogas upgrading in a trickling bed reactor with H2 further enhanced total methane output by 100% and resulted in a final CO2 concentration of =3%. The integrated APAD process achieved a remarkable overall CCE of 83%, resulting in a 200% increase in RNG output when compared to conventional AD. Techno-economic analysis revealed that AWOEx pretreatment alone reduced sludge treatment costs from $494 to $253 per ton of dry solids. The complete APAD process incurred a higher cost of treatment of $530 per ton, driven by prices for bottled H2. The process did, however, show gains in energy recovery and decarbonization. Renewable H2, which may reduce in price in the near future, can positively improve the economics of biogas upgrading for the APAD process.

Life Cycle Assessment (LCA)↗
DOE OSTI2020

Polymer-cement composites with adhesion and re-adhesion (healing) to casing capability for geothermal wellbore applications

Deterioration of cement/casing adhesion in wellbore scenarios can result in unwanted and potentially harmful leakage with the potential of serious repair costs. In this work, we explore the use of self-healing polymers added to conventional wellbore cements as a way to bring about self-healing and readhering (to steel casing) properties to the composite material. The polymers are pH resistant and seem to improve the cement integrity after exposure to typical chemical and thermal stresses encountered under geothermal wellbore conditions. We find that addition of about 10-15 wt% of polymer to the cement visually increases its resistance to fracturing from exposure to geothermal conditions, while the adhesive strength of cement/stainless steel increases with curing time for a period of about 10 days. Self-healing capability was demonstrated by permeability analysis showing that polymer-cement composites reduce flow by 50-70% at cement bulk and at the cement/steel interface. Use of atomistic simulations imply that these polymers have good wetting properties on the steel surfaces. Analysis of the interactions between steel/polymer and cement/polymer show that they are complementary, resulting in a wider range of bonding patterns. Cracks are likely to expose under-coordinated sites that result in more bonding interactions, which agrees well with the permeability measurements showing high degree of healed cracks and healed (cement-steel) interfacial gaps together with an overall increased in structural integrity of these advanced polymer-cement composite materials.

Rod, Kenton A.↗
DOE OSTI2021

Effect of chloride ingress on self-healing recovery of smart cementitious composite incorporating crystalline admixture and MgO expansive agent

Highlights: • Crack closure under wet/dry cycles in chloride solution is higher than the one in distilled water. • Element analysis shows that calcium is vital for crack healing either in water or chloride solution. • AFm is consumed by chloride ion to form Fs, and Fs were decomposed to AH{sub 3} by carbonation. • Soluble reactive silica reacts with calcium hydrate to form C-S-H gel to heal concrete cracks. • Expansion of magnesium hydroxide facilitates crack self-healing by interconnected network. In this study, the effect of chloride environment containing various concentrations of chloride ion (Cl{sup −}) on self-healing performance of pre-cracked cementitious composite containing crystalline admixture (CA) and MgO expansive agent (MEA) was investigated under wet-dry cycles in chloride solutions. The results revealed that the Cl{sup −} changed the mineralogy of self-healing products, and consequently, affected the crack closure ratio and mechanical strength recovery. When self-healing occurred in distilled water, a large amount of ettringite (AFt) were detected, whereas in Cl{sup −} solution, monosulfate (AFm) was consumed by Cl{sup −} to form Friedel's salt (Fs), and then the Fs was decomposed to Al(OH){sub 3}(AH{sub 3}) due to carbonation. During the multiphase conversion process, hydroxide (OH{sup −}) was released into crack solution, therefore the dissolved carbon dioxide (CO{sub 2}) concentration was increased. The carbonation of the crystals formed in cracks was accelerated with the volume expansion, which achieved rapid crack sealing but contributed little to the mechanical performance recovery.

36 MATERIALS SCIENCE↗
DOE OSTI2021

An in-situ 3D micro-XRD investigation of water uptake by alkali-silica-reaction (ASR) product

The ASR products in concrete have various chemical compositions. It is yet unclear whether and how these products develop micro-expansion upon moisture ingress. This paper presents a 3D in-situ observation of the crystallography and volume change of an ASR-product-filled vein under varying relative-humidity (R.H.). The vein was observed to contain two layered nano-crystalline phases with distinct basal spacings, and was distributed heterogeneously in space. When R.H. changed from 10% to >38%, the basal spacing increased from 7.43 Å to 8.89 Å for one phase, whereas it remained constant (~10.9 Å) for the other. This is the first time that an ASR product is observed in-situ to exhibit crystal structural expansion during wetting process. However, the product-filled vein exhibited no noticeable swelling when R.H. varied from 10% to 97%. Our findings provide the first direct evidence that the moisturization-induced crystal structural change of ASR product may not be a plausible explanation to the macroscale concrete expansion.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quantifying the anomalous water absorption behavior of cement mortar in view of its physical sensitivity to water

The one-dimensional water absorption into cement-based materials, possibly the simplest case of unsaturated water flow playing a fundamental role in predicting mass transport and durability, is still far from being completely understood due to several puzzling anomalies. Considering the water sensitivity of C-S-H gels (swell upon wetting and contract upon drying), a modified Richards equation (MRE) is proposed to quantify the anomalous water absorption into cement-based materials of changing porosity. Consistent experimental tests on a cement mortar and calculations indicate that the MRE with time-decaying water permeability can quantitatively capture the long-term absorption with two linear stages and a nonlinear transition stage between them. The water sensitivity is validated to be responsible for the anomalous deviation of water absorption from the classical square root of time law. It also partially contributes to the anomalous dependence of sorptivity on the temperature-dependent surface tension and viscosity of water and many organic liquids.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Air entraining admixtures: Mechanisms, evaluations, and interactions

Air entraining admixtures (AEAs) are surfactant-based solutions and powders that are used to stabilize air voids in cement paste that protect concrete against frost damage. After reviewing the chemical and structural features of AEA that govern their performance, we discuss: (i) how they establish a stabilizing shell around air voids, (ii) methods for quantifying the distribution of voids after mixing and after hardening, (iii) mechanisms by which voids protect against frost damage, (iv) effects of AEA on other properties of wet and hardened concrete, and (v) interactions of AEA with other chemical and supplementary cementitious materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The role of environmental conditions on the carbonation of an alkali-activated cementitious waste form

Cast Stone is a cementitious waste form being considered for the solidification of low activity waste at the DOE Hanford Site. Under near-surface disposal conditions in an arid environment, Cast Stone is subject to drying and carbonation which may impact retention of waste constituents. Here this study investigates the effects of environmental CO 2 concentration and relative humidity (RH) on the carbonation of Cast Stone. The rate of carbonation front ingress and the extent of carbonation reaction were characterized for samples aged up to 48 weeks at three RH levels and two CO 2 concentrations. While the 68% RH environment allowed the greatest reaction extent, the 15% RH environment yielded the deepest carbonation front ingress. At 68% RH, there was a linear relationship between the ingress rate and CO 2 concentration. Carbonation reactions increased the drying rate of Cast Stone. Redistribution of sodium toward the wetting front was observed under drying and carbonation conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dielectric and magnetic properties of microwave-absorbing FeAl x O y catalysts fabricated via solution combustion synthesis

Iron-based alumina (FeAl x O y ) nanocomposites are microwave-absorbers and catalysts, which makes them promising for emerging microwave-assisted thermocatalytic technologies. Solution combustion synthesis (SCS) has been used to synthesize FeAl x O y powders, and prior work has demonstrated that adjusting SCS parameters significantly changes phase composition and specific surface area of the products. However, it is unclear how synthesis parameters affect their microwave-absorbing properties, which are essential for optimizing microwave-assisted technologies. To address this challenge, in the present work, twelve different FeAl x O y products were synthesized at different combinations of the SCS parameters such as two fuels (citric acid and glycine), two heating modes (hotplate and muffle furnace), and three Fe:Al molar ratios (2:1, 1:1, 1:2). Dielectric and magnetic properties of the products were characterized using a network analyzer and a vibrating sample magnetometer. Based on the measured permittivity and permeability, penetration depth and reflection loss were calculated as a function of frequency and bed thickness. The products were heated by microwaves at 2.45 GHz and then examined with X-ray diffraction (XRD) analysis. For all products, the magnetic saturation was lower than for bulk iron oxides because of the small crystallite size and aluminum substitution. The use of glycine induced high dielectric losses and enabled fast microwave-heating rates compared to citric acid. Higher Fe:Al ratio also led to higher dielectric and magnetic losses. With glycine fuel, SCS in a furnace induced larger penetration depth and lower microwave absorption than SCS on a hotplate. The minimization of reflected power was more sensitive to the thickness of the product bed than to the frequency of the electromagnetic field. Post-heating XRD analysis revealed different phase transformations in the FeAl x O y powders depending on the SCS parameters. As a result, an FeAl x O y material, synthesized via incipient wetness impregnation, lacked magnetic losses and did not heat well as compared to the SCS products.

Combustion synthesis↗