Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transport coefficients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

A relationship between radar backscatter and aerodynamic roughness - Preliminary results

The ability of the wind to move particles and the flux of windblown sand are both dependent on the topographic roughness of the surface, as measured by the aerodynamic roughness, z(0). For most surfaces, topographic roughness controls many of the characteristics of the radar return, and the magnitude of the radar backscatter can be regarded as a measure of the surface roughness at or near the wavelength scale. Radar backscatter data may therefore be useful in obtaining a value of aerodynamic roughness which can be used to assess aeolian sediment transport via remote sensing. In this study, calibrated L(HH), C(HH) and Ku(VV) radar data were used to derive characteristic backscatter coefficients sigma(0) for three lava flow units, an alluvial fan, and a playa surface. Preliminary analyses show that values of sigma(0) and z(0) both increase with topographic roughness and that there is a good correlation between the two coefficients. This correlation suggests that it may be possible to assess aerodynamic roughness directly from radar data.

Greeley, Ronald↗

Windward fraction of the total mass or heat transport for flow past a circular cylinder

The windward fraction of the total mass or heat transport for flow past a cylindrical aerodynamic object was estimated using the available experimental data for the angular distribution of the Nusselt transfer coefficient, Nu(theta, Re). The Re dependence of the windward surface fraction was calculated for the values of Re between 2 and 400,000. The results obtained from polar integrations of data from eight sources indicate that, for Reynolds numbers up to about 2000, more than 70 percent of the total transfer occurs on the windward surface. For the Re values above 100,000, the windward percentage is less than 50 percent.

Gokoglu, S.↗

Parameterization of planetary wave breaking in the middle atmosphere

A parameterization of planetary wave breaking in the middle atmosphere has been developed and tested in a numerical model which includes governing equations for a single wave and the zonal-mean state. The parameterization is based on the assumption that wave breaking represents a steady-state equilibrium between the flux of wave activity and its dissipation by nonlinear processes, and that the latter can be represented as linear damping of the primary wave. With this and the additional assumption that the effect of breaking is to prevent further amplitude growth, the required dissipation rate is readily obtained from the steady-state equation for wave activity; diffusivity coefficients then follow from the dissipation rate. The assumptions made in the derivation are equivalent to those commonly used in parameterizations for gravity wave breaking, but the formulation in terms of wave activity helps highlight the central role of the wave group velocity in determining the dissipation rate. Comparison of model results with nonlinear calculations of wave breaking and with diagnostic determinations of stratospheric diffusion coefficients reveals remarkably good agreement, and suggests that the parameterization could be useful for simulating inexpensively, but realistically, the effects of planetary wave transport.

Garcia, Rolando R.↗

Grain Boundary Effects on Radiation Damage and Tritium Diffusion in Li–Al–O Ceramics from Molecular Dynamics and Experiments

Understanding irradiation damage and tritium transport in LiAlO2 ceramics is essential for their deployment in tritium-producing burnable absorber rods (TPBARs). Grain boundaries (GBs) play an important role in governing radiation response and tritium transport in LiAlO2 and its secondary phase LiAl5O8. Using molecular dynamics simulations, we investigated defect evolution and tritium diffusion during displacement cascades in single-crystal and bicrystal LiAlO2 and LiAl5O8 at 600 K. The results reveal that GBs suppress the damage in the LiAlO2 bicrystals as compared to single crystals, via interstitial emission. The effect is more pronounced for Li defects, than for Al and O. In LiAl5O8 the damage reduction due to introduction of GB is less pronounced overall. Tritium diffusion coefficients at GBs are higher by factors of 2–10 relative to diffusion inside grain bulk. The effect is particularly pronounced in LiAlO2, where S5, S17, and S25 GBs promote rapid tritium transport, whereas LiAl5O8 exhibits slower diffusion due to reduced free volume at its GBs. These findings evince a trade-off that while GBs mitigate radiation damage by absorbing interstitials, they simultaneously provide fast pathways for tritium migration which is not desirable for TPBAR application. The mechanistic insights gained here establish a foundation for microstructural design strategies to balance radiation tolerance and tritium retention in ceramic breeder materials.

Roy, Ankit↗

Scaling of the strange-metal scattering in unconventional superconductors

Marked evolution of properties with minute changes in the doping level is a hallmark of the complex chemistry that governs copper oxide superconductivity as manifested in the celebrated superconducting domes and quantum criticality taking place at precise compositions. The strange-metal state, in which the resistivity varies linearly with temperature, has emerged as a central feature in the normal state of copper oxide superconductors. The ubiquity of this behaviour signals an intimate link between the scattering mechanism and superconductivity. However, a clear quantitative picture of the correlation has been lacking. In this study we report the observation of precise quantitative scaling laws among the superconducting transition temperature (T c ), the linear-in-T scattering coefficient (A 1 ) and the doping level (x) in electron-doped copper oxide La 2-x Ce x CuO 4 (LCCO). High-resolution characterization of epitaxial composition-spread films, which encompass the entire overdoped range of LCCO, has enabled us to systematically map its structural and transport properties with unprecedented accuracy and with increments of Δx = 0.0015. Additionally, we have uncovered the relations T c ~ (x c - x) 0.5 ~ (A 1 $\square$ ) 0.5 , where x c is the critical doping in which superconductivity disappears and A 1 $\square$ is the coefficient of the linear resistivity per CuO 2 plane. The striking similarity of the T c versus A 1 $\square$ relation among copper oxides, iron-based and organic superconductors may be an indication of a common mechanism of the strange-metal behaviour and unconventional superconductivity in these systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spatiotemporal Observation of Quasi-Ballistic Transport of Electrons in Graphene

We report spatiotemporal observations of room-temperature quasi-ballistic electron transport in graphene, which is achieved by utilizing a four-layer van der Waals heterostructure to generate free charge carriers. The heterostructure is formed by sandwiching a MoS 2 and MoSe 2 heterobilayer between two graphene monolayers. Transient absorption measurements reveal that the electrons and holes separated by the type-II interface between MoS 2 and MoSe 2 can transfer to the two graphene layers, respectively. Transient absorption microscopy measurements, with high spatial and temporal resolution, reveal that while the holes in one graphene layer undergo a classical diffusion process with a large diffusion coefficient of 65 cm 2 s –1 and a charge mobility of 5000 cm 2 V –1 s –1 , the electrons in the other graphene layer exhibit a quasi-ballistic transport feature, with a ballistic transport time of 20 ps and a speed of 22 km s –1 , respectively. The different in-plane transport properties confirm that electrons and holes move independently of each other as charge carriers. Furthermore, the optical generation of ballistic charge carriers suggests potential applications for such van der Waals heterostructures as optoelectronic materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Teleparallelism as a universal connection on null hypersurfaces in general relativity

It is shown that a close relationship between the inner geometry of a null hypersurface N3 and the Newman-Penrose (NP) (1962, 1963) spin coefficient formalism exists. Projecting the null complex NP tetrad onto N3, two triads of basis vectors in N3 are obtained. The inner geometry of N3 is based on the assumption that these vectors are parallelly transported along the surface; this gives rise to the teleparallel connection as a metric nonsymmetric affine connection. The gauge freedom for the choice of the basis triads is given by the isotropy subgroup of the local Lorentz group leaving invariant the direction of the null generators of N3, and teleparallelism is determined by the equivalence class of the basis triads with respect to the global gauge group. Nine of the twelve NP coefficients are identified as the triad components of the torsion and the second fundamental form of N3. The resulting generalized Gauss-Codazzi equations are identical to nine of the NP equations, i.e., to the half of the Ricci identities. This result gives a geometrical meaning to the entire formalism. Finally a general proof of Penrose's theorem that the shear of the null generators of N3 is the only initial null datum for a gravitational field on N3 is presented.

Mazur, P. O.↗

Sodium diffusion in heterogeneous porous media: Connecting laboratory experiments and simulations

Sodium has been suggested as a tracer for brine in reservoir formations where a significant amount of sodium ion is found mainly in the aqueous phase. Fortunately, the most abundant sodium isotope, 23 Na, is Nuclear Magnetic Resonance (NMR) active, making it possible to study the structure and dynamical properties of both bulk and pore confined fluid systems. We investigated the diffusion of key dissolved sodium species in bulk solution and porous media as a function of composition, ionic strength, and permeability of the carbonate samples using NMR relaxometry and pulsed-field gradient (PFG) NMR techniques. We use Indiana limestone as an example of natural porous media and water as a freely diffusible tracer and carrier. We demonstrate apparent diffusion measurement of sodium based on changes in spin–spin relaxation time (T 2 ) signal in pore confinement. The diffusion rate of sodium decreases with increasing counter-ion size. This effect is greater at higher ionic strengths and lower chemical potentials in porous media. The reactive transport code, CrunchFlow, was used to complement the NMR experiments to simulate diffusion behavior in porous media. Combining these two methods provides a powerful approach to estimating effective diffusion coefficients in heterogeneous matrices. The modeling considers the influence of physical properties (porosity and tortuosity) and chemical properties (geochemical composition and chemical gradients). The results presented in this work highlight the advantage of measuring apparent diffusivity using NMR T 2 relaxometry in conjunction with numerical simulation to derive effective diffusivity and the corresponding matrix properties (i.e., tortuosity) of the system.

58 GEOSCIENCES↗

Modulating the Electronic Transport of 2D Sb2Te3 Nanoplates by Coinage Metal Intercalation

Thermoelectric materials are particularly relevant to the current energy infrastructure and demands of the 21st century, converting waste heat into usable electricity. The solution intercalation of zerovalent copper into Sb2Te3 nanoplates, a well-established thermoelectric material, is reported. The copper intercalant is homogeneously distributed throughout the nanoplates, confirmed by scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy. The copper composition was shown to be 6 at. % by X-ray photoelectron spectroscopy. Copper ordering within the van der Waals gaps of the nanoplates is confirmed by selected area electron diffraction. Fabrication and thermoelectric property measurements of single-crystal Sb2Te3 and Cu-Sb2Te3 nanoplate devices show effective modulation of electrical conductivity and Seebeck coefficient with Cu intercalation. X-ray photoelectron spectroscopic studies in the valence-band region reveal additional electronic states from copper that appear near the Fermi energy, postulated to act as electron acceptors, leading to modulation of the electronic transport properties.

2D nanoplates↗

A high subsonic speed wind tunnel investigation of winglets on a representative second-generation jet transport wing

The effects of winglets on the aerodynamic forces and moments, loads, and crossflow velocities behind the wing tip are discussed. The results of the investigation indicate that winglets significantly reduce the drag coefficient at lifting conditions. The experiments were conducted in an 8-foot transonic pressure tunnel at Mach numbers from 0.70 to 0.83 and over a lift coefficient range up to 0.65. A semispan model was used.

Flechner, S. G.↗

Large Anomalous and Topological Hall Effect and Nernst Effect in a Dirac Kagome Magnet Fe 3 Ge

Searching for Kagome magnets with novel magnetic and electronic properties has been attracting significant efforts recently. Here, the magnetic, electronic, and thermoelectric properties of Fe 3 Ge single crystals with Fe atoms forming a slightly distorted Kagome lattice are reported. It is shown that Fe 3 Ge exhibits a large anomalous Hall effect and anomalous Nernst effect. The observed anomalous transverse thermoelectric conductivity $|α^A_{xz}|$ reaches ≈4.6 A m −1 K −1 , which is larger than the conventional ferromagnets and most of the topological ferromagnets reported in literature. The first-principles calculations suggest that these exceptional transport properties are dominated by the intrinsic mechanism, which highlights the significant contribution of the Berry curvature of massive Dirac gaps in the momentum space. Additionally, a topological Hall resistivity of 0.9 µΩ cm and a topological Nernst coefficient of 1.2 µV K −1 are also observed, which are presumably ascribed to the Berry phase associated with the field-induced non-zero scalar spin chirality. These features highlight the synergic effects of the Berry phases in both momentum space and real space of Fe 3 Ge, which render it an excellent candidate for room-temperature thermoelectric applications based on transverse transport.

Kagome magnet↗

Influence of Hydrogen and Oxygen on the Structure and Properties of Sputtered Magnesium Zirconium Oxynitride Thin Films

Nitride materials with mixed ionic and covalent bonding character and resulting good charge transport properties are attractive for optoelectronic devices. Recently, Mg-based ternary nitride materials were found to have large dielectric constants and high absorption coefficients with bandgaps appropriate for photovoltaic applications. However, their degenerate carrier concentrations still hinder their possible applications in solar cells and related optoelectronic devices. Therefore, further understanding and engineering of the parameters controlling the material properties of these ternary nitrides is highly desirable. In this paper we report that the structural, optical and electrical properties of magnesium zirconium oxynitride (MZNO) thin films synthesized by combinatorial sputtering with a wide range of cation compositions can be affected by incorporation of oxygen and hydrogen. Excess oxygen improved the crystallinity of MZNO thin films whereas hydrogen attracted oxygen and formed Mg-rich oxide layers at the grain boundaries which in turn reduced the conductivity. On the other hand, optical properties are more sensitive to the composition – both cation and anion ratios – rather than the presence of hydrogen. Compared to cation-stoichiometric MZNO (10 19 –10 20 cm -3 ), substantial reduction of carrier concentration down to ~10 14 cm -3 was achieved under Mg-rich conditions by supplying hydrogen during growth. Photoluminescence measurements showed that the films prepared with hydrogen were optoelectronically active. Overall, this study demonstrates that the material properties of MZN thin films can be significantly influenced by incorporation of oxygen and hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Model study of the energy dependence of the correlation between anisotropic flow and the mean transverse momentum in Au + Au collisions

A hybrid model that employs the hadron-string transport model UrQMD and the (3+1)-dimensional relativistic viscous hydrodynamic code vHLLE, is used to investigate the beam energy dependence of the correlation coefficient ρ(v$^{2}_{2}$,[p T ]) between the average transverse momentum [p T ] of hadrons emitted in an event and the square of the anisotropic flow coefficient v$^{2}_{2}$. For Au+Au collisions, the model predicts characteristic patterns for the energy and event-shape dependence of the variances for [p T ] and v$^{2}_{n}$ [Var([p T ] and Var(v$^{2}_{2}$)], and the covariance of v$^{2}_{n}$ and [p T ][cov(v$^{2}_{2}$,[p T ])], consistent with the attenuation effects of the specific shear viscosity η/s. Here in contrast, ρ(v$^{2}_{2}$,[p T ]) is predicted to be insensitive to the beam energy but sensitive to the initial-state geometry of the collisions. These observations suggest that a precise set of measurements for Var([p T ]), Var(v$^{2}_{2}$), cov(v$^{2}_{2}$,[p T ]) and ρ(v$^{2}_{2}$,[p T ]) as a function of beam energy and event shape, could serve to constrain better the eccentricities and their fluctuations over the entire span of beam energies, and consequently aid precision extraction of the temperature and baryon chemical-potential dependence of η/s from the wealth of Au+Au data obtained in the RHIC beam energy scan.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development and application of a method for predicting rotor free wake positions and resulting rotor blade air loads. Volume 1: Model and results

Rotor wake geometries are predicted by a process similar to the startup of a rotor in a free stream. An array of discrete trailing and shed vortices is generated with vortex strengths corresponding to stepwise radial and azimuthal blade circulations. The array of shed and trailing vortices is limited to an arbitrary number of azimuthal steps behind each blade. The remainder of the wake model of each blade is an arbitrary number of trailing vortices. Vortex element end points were allowed to be transported by the resultant velocity of the free stream and vortex-induced velocities. Wake geometry, wake flow, and wake-induced velocity influence coefficients are generated by this program for use in the blade loads portion of the calculations. Blade loads computations include the effects of nonuniform inflow due to a free wake, nonlinear airfoil characteristics, and response of flexible blades to the applied loads. Computed wake flows and blade loads are compared with experimentally measured data. Predicted blade loads, response and shears and moments are obtained for a model rotor system having two independent rotors. The effects of advance ratio, vertical separation of rotors, different blade radius ratios, and different azimuthal spacing of the blades of one rotor with respect to the other are investigated.

Sadler, S. G.↗

Shuttle entry performance and stability and control derivatives extraction from flight measurement data

Flight data taken from three Shuttle Space Transportation System flights (STS-1, 2, and 3) during entry are analyzed to determine the shuttle performance and aerodynamic characteristics. Correlations of the performance coefficients and the stability and control derivatives with preflight predictions are presented over the hypersonic speed range from Mach 2 to 25. In addition, an evaluation of the effectiveness of the onboard Reaction Control System (RCS) is given and an effort is made to independently quantify the combined impingement and flow-field interaction effects on the spacecraft rolling moment. Comparisons of stability and control derivatives extracted for the same flight conditions, but using data from different onboard sensors are also made. Results obtained using the same flight data, but different computer software are also shown.

Compton, H. R.↗

Phenomena Simulation for Heavy Doping and Surface Recombination Velocity

The theoretical models now available that characterize heavily doped (highly conducting) regions in silicon are survyed. Analytical and numerical approaches that determine the influence of such regions on the conversion efficiency of solar cells are examined. Although dilutely doped silicon is well characterized except for some disagreement about optical absorption coefficients, what exists now for heavily doped silicon and its interplay with adjoining regions is an incomplete theory in which not all contributers to transport, recombination, generation, and trapping are defined. Further, the parameters relating to these mechanisms and their values as determined by experiment are subject to various interpretations. The characterization of heavily doped silicon is treated not as a theory but rather as an imperfectly articulated and incompletely formalized body of experience. This view is intended to help point the way toward the attainment of a more complete of heavily doped silicon and thereby toward more informed designs of solar cells. Because computer programs constitute tools both for design and for estimating performance limits, the review includes some remarks pertinent to existing and developing programs.

Lindholm, F. A.↗

Structure and superconducting properties of ((Ln(1-x)Ln*(x) 1/2 (Ba(1-y)Sr(y) 1/3 Ce 1/6) 8Cu6O(z)

A variety of new oxide superconductors were prepared. The crystallographic structures of the oxides were all tetragonal and of the (Ln(+), Ce)4(Ln(+),Ba)4Cu6Oz (Ln(+) = Nd, Sm or Eu) type which had been previously discovered by Akimitsu et al. As the Sr content, y, increased when Ln = Ln(excited state) = Nd, the oxygen content, z, monotonically increased and the superconducting transition temperature, T(sub c), varied exhibiting a maximum. When z was controlled directly by means of high oxygen pressure sintering techniques, T(sub c) was changed accordingly. T(sub c's) of samples with different combinations of Ln and Ln(excited state) and different values of x and y were found to depend on the magnitude of the bond valence sum for a Cu atom located in the bottom plane of the Cu-O5 pyramid. Transport and magnetization measurements were carried out to investigate the magnetic field dependence of superconducting properties and to determine the phenomenological parameters. The Hall coefficients were positive below room temperature and varied yielding a maximum with respect to temperature.

Yamauchi, H.↗

Structure and superconducting properties of ((Ln(1-x)Ln*(x) 1/2 (Ba(1-y)Sr(y) 1/3 Ce 1/6)8Cu6O(z)

A variety of new oxide superconductors were prepared. The crystallographic structures of the oxides were all tetragonal and of the (Ln(+),Ce)4(Ln(+),Ba)4Cu6Oz (Ln(+) = Nd, Sm or Eu) type which had been previously discovered by Akimitsu et al. As the Sr content, y, increased when Ln = Ln(excited state) = Nd, the oxygen content, z, monotonically increased and the superconducting transition temperature, T sub c, varied exhibiting a maximum. When z was controlled directly by means of high oxygen pressure sintering techniques, T sub c was changed accordingly. T sub c's of samples with different combinations of Ln and Ln(excited state) and different values of x and y were found to depend on the magnitude of the bond valence sum for a Cu atom located in the bottom plane of the Cu-O5 pyramid. Transport and magnetization measurements were carried out to investigate the magnetic field dependence of superconducting properties and to determine the phenomenological parameters. The Hall coefficients were positive below room temperature and varied yielding a maximum with respect to temperature.

Yamauchi, H.↗