Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “topic modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Parameter estimation of large flexible aerospace structures with application to the control of the Maypole Deployable Reflector

Systems such as the Maypole deployable reflector have a distributed parameter nature. The flexible column and hoop structure and the circular antenna of 30-100 meter diameter which it supports are described by partial, rather than ordinary, differential equations. Progress completed in reduced order modelling andd controller design and digital parameter estimation and control is summarized. Topics covered include depolyment and on-orbit operation; quasi-static (steady state) operation; dynamic distributed parameter system; autoregressive moving average identification; frequency domain procedures; direct or implicit active control; adaptive observers; parameter estimation using a linear reinforcement learning factor; feedback control; and reduced order modeling for nonlinear systems.

Balas, M. J.↗

Actinides and Rare Earths Topical Conference (Code AC)

Actinide and the Rare Earth materials exhibit many unique and diverse physical, chemical and magnetic properties, in large part because of the complexity of their f electronic structure. This Topical Conference will focus upon the chemistry, physics and materials science in Lanthanide and Actinide materials, driven by 4f and 5f electronic structure. Particular emphasis will be placed upon 4f/5f magnetic structure, surface science and thin film properties. For the actinides, fundamental actinide science and its role in resolving technical challenges posed by actinide materials will be stressed. Both basic and applied experimental approaches, including synchrotron-radiation-based investigations, as well as theoretical modeling and computational simulations, are planned to be part of the Topical Conference. Of particular importance are the issues related to the potential renaissance in Nuclear Fuels, including synthesis, oxidation, corrosion, intermixing, stability in extreme environments, prediction of properties via benchmarked simulations, separation science, environmental impact and disposal of waste products.

36 MATERIALS SCIENCE↗

Analysis of School Commuting Data for Exposure Modeling Purposes

Human exposure models often make the simplifying assumption that school children attend school in the same census tract where they live. This paper analyzes that assumption and provides information on the temporal and spatial distributions associated with school commuting. The data were obtained using Oak Ridge National Laboratory s LandScan USA population distribution model (Bhaduri et al., 2007) applied to Philadelphia PA. It is a high-resolution model used to allocate individual school-aged children to both a home and school location, and to devise a minimum-time home-to school commuting path (called a trace) between the two locations. LandScan relies heavily on Geographic Information System (GIS) data. Our GIS analyses found that in Philadelphia: (1) about 32% of the students walk across 2 or more census tracts and 40% of them walk across 4 or more census blocks; (2) 60% drive across 4 or more census tracts going to school and 50% drive across 10 or more census blocks; (3) five-minute commuting time intervals result in misclassification as high as 90% for census blocks, 70% for block groups, and 50% for census tracts; (4) a one-minute time interval is needed to reasonably resolve time spent in the various census unit designations; (5) approximately 50% of both schoolchildren s homes and schools are located within 160 m of highly-traveled roads, and 64% of the schools are located within 200 m. These findings are very important when modeling school children s exposures, especially when ascertaining the impacts of near-roadway concentrations on their total daily body burden. Since many school children also travel along these streets and roadways to get to school, a majority of children in Philadelphia are in mobile-source dominated locations most of the day. We hypothesize that exposures of school children in Philadelphia to benzene and particulate matter will be much higher than if home and school locations and commuting paths at a 1-minute time resolution are not explicitly modeled in an exposure assessment. Undertaking such an assessment will be the topic of a future paper.

54 ENVIRONMENTAL SCIENCES↗

A strategic systems perspective of organizational learning theory: models for a case study at the Jet Propulsion Laboratory

Organizational learning is an umbrella term that covers a variety of topics including; learning curves, productivity, organizational memory, organizational forgetting, knowledge transfer, knowledge sharing and knowledge creation. This treatise will review some of these theories in concert with a model of how organizations learn.

organizational learning strategy innovation design↗

Uncertainty in the response of sudden stratospheric warmings and stratosphere- troposphere coupling to quadrupled CO2 concentrations in CMIP6 models

Major sudden stratospheric warmings (SSWs), vortex formation and final breakdown dates are key highlight points of the stratospheric polar vortex. These phenomena are relevant for stratosphere-troposphere coupling, which explains the interest in understanding their future changes. However, up to now, there is not a clear consensus on which projected changes to the polar vortex are robust, particularly in the Northern Hemisphere, possibly due to short data record or relatively moderate CO2 forcing. The new simulations performed under the Coupled Model Intercomparison Project, Phase 6, together with the long daily data requirements of the DynVarMIP project in preindustrial and quadrupled CO2 (4xCO2 ) forcing simulations provide a new opportunity to revisit this topic by overcoming the limitations mentioned above. In this study, we analyze this new model output to document the change, if any, in the frequency of SSWs under 4xCO2 forcing. Our analysis reveals a large disagreement across the models as to the sign of this change, even though most models show a statistically significant change. The models, however, are in good agreement as to the impact of SSWs over the North Atlantic: there is no indication of a change under 4xCO2 forcing. Over the Pacific, however, the change is more uncertain. Finally, the models show robust changes to the seasonal cycle in the stratosphere. Specifically, we find a longer duration of the stratospheric polar vortex, and thus a longer season of stratosphere-troposphere coupling.

sudden stratospheric warmings (SSWs)↗

Recent Improvements in PV+Battery Modeling in NREL's System Advisor Model

This poster covers recent updates to the NREL System Advisor Model's battery model that can be coupled to the PV model to add value to both front of meter and behind the meter systems. Topics include new dispatch algorithms focusing on smoothing the output of a PV plant to meet ramp rate requirements and responding to price signals to maximize system revenue, validated battery lifetime models, grid outage simulations and resiliency metrics, and the new levelized cost of storage (LCOS) metric. We will also share preliminary results from NREL analysis projects using these features.

battery↗

Application of Lanczos vectors to control design of flexible structures

This report covers research conducted during the first year of the two-year grant. The research, entitled 'Application of Lanczos Vectors to Control Design of Flexible Structures' concerns various ways to obtain reduced-order mathematical models for use in dynamic response analyses and in control design studies. This report summarizes research described in several reports and papers that were written under this contract. Extended abstracts are presented for technical papers covering the following topics: controller reduction by preserving impulse response energy; substructuring decomposition and controller synthesis; model reduction methods for structural control design; and recent literature on structural modeling, identification, and analysis.

Craig, Roy R., Jr.↗

Aircraft aeroelasticity and structural dynamics research at the NASA Langley Research Center - Some illustrative results

Highlights of nine different research studies are described. Five of these topics relate directly to fixed-wing aircraft and range from flutter studies using relatively simple and inexpensive wind-tunnel models to buffet studies of the vertical tails of an advanced high-performance configuration. The other four topics relate directly to rotary-wing aircraft and range from studies of the performance and vibration characteristics of an advanced rotor design to optimization of airframe structures for vibration attenuation.

Doggett, Robert V., Jr.↗

Preface to the Special Issue on Modeling and Data Analysis Methods for the SMILE mission

The SMILE (Solar wind Magnetosphere Ionosphere Link Explorer) project (http://www.nssc.cas.cn/smile/, https://www.cosmos.esa.int/web/smile/mission) is a joint spacecraft mission of the European Space Agency (ESA) and the Chinese Academy of Sciences (CAS) with an expected launch in 2025. SMILE aims to study the global interactions of solar wind–magnetosphere–ionosphere innovatively by imaging the Earth’s magnetosheath and cusps in soft X-rays and the northern auroral region in ultraviolet (UV) while simultaneously measuring plasma and magnetic field parameters in the solar wind and magnetosheath along a highly-elliptical and highly-inclined orbit. This special issue is composed of 22 articles, presenting recent progress in modeling and data analysis techniques developed for the SMILE mission. In this preface, we categorize the articles into the following seven topics and provide brief summaries: (1) instrument descriptions of the Soft X-ray Imager (SXI), (2) numerical modeling of the X-ray signals, (3) data processing of the X-ray images, (4) boundary tracing methods from the simulated images, (5) physical phenomena and a mission concept related to the scientific goals of SMILE-SXI, (6) studies of the aurora, and (7) ground-based support for SMILE.

SMILE↗

How structural differences influence cross-model consistency: An electric sector case study

Multiple models are often employed to describe a range of possible outcomes for one or more scenarios, yielding insights into causal relationships and their uncertainties. Electric sector capacity expansion scenarios are a common topic of such efforts due to the economic influence of the electric sector, but model results typically span a broad solution space despite efforts to harmonize input assumptions, making decision implications difficult to discern. This study investigates the relationship between input harmonization and cross-model scenario consistency under disparate electric sector scenarios. We compare cross-model consistency between two state-of-the-art electric sector capacity expansion models (GCAM-USA and ReEDS) for six electric sector scenarios comprising alternate assumptions about fossil fuel resource availability, technology innovation, and long-term economy-wide transitions under four harmonization configurations varying model representations of electricity demand, fuel prices, renewable resources, and capacity retirements. These comparisons reveal that cross-model consistency can vary across scenarios under a given harmonization configuration, suggesting that harmonization efforts must often be scenario-specific if comparable cross-model consistency is desired. Model structural differences can hinder consistency, and the impact of these differences can depend on the scenario. Ultimately, thorough harmonization can reveal insights into cross-model consistency, which can be used to tighten uncertainty bounds and improve the decision-making implications of multi-model activities.

Cohen, Stuart↗

PACKAGE IMPACT MODELS AS A PRECURSOR TO CLADDING ANALYSIS

The evaluation of spent nuclear fuel storage casks and transportation packages under impact loading is an important safety topic that is reviewed as part of cask and package certification by the United States Nuclear Regulatory Commission. Explicit dynamic finite element models of full systems are increasingly common in industry for determining structural integrity during hypothetical drop accidents. Full cask and package model results are also used as the loading basis for single fuel pin impact models, which evaluate the response of fuel cladding under drop conditions. In this paper, a simplified package system is evaluated to illustrate several important structural dynamic phenomena, including the effect of gaps between components, the difference in local response at various points on a package during impact, and the effect of modeling various simplified representations of the basket and fuel assemblies. This paper focuses on the package impact analysis, and how loading conditions for a subsequent fuel assembly or fuel cladding analysis can be extracted.

Klymyshyn, Nicholas A.↗

Models Required to Mitigate Impacts of Space Weather on Space Systems

This viewgraph presentation attempts to develop a model of factors which need to be considered in the design and construction of spacecraft to lessen the effects of space weather on these vehicles. Topics considered include: space environments and effects, radiation environments and effects, space weather drivers, space weather models, climate models, solar proton activity and mission design for the GOES mission. The authors conclude that space environment models need to address issues from mission planning through operations and a program to develop and validate authoritative space environment models for application to spacecraft design does not exist at this time.

Barth, Janet L.↗

Climate Science Performance, Data and Productivity on Titan

Climate Science models are flagship codes for the largest of high performance computing (HPC) resources, both in visibility, with the newly launched Department of Energy (DOE) Accelerated Climate Model for Energy (ACME) effort, and in terms of significant fractions of system usage. The performance of the DOE ACME model is captured with application level timers and examined through a sizeable run archive. Performance and variability of compute, queue time and ancillary services are examined. As Climate Science advances in the use of HPC resources there has been an increase in the required human and data systems to achieve programs goals. A description of current workflow processes (hardware, software, human) and planned automation of the workflow, along with historical and projected data in motion and at rest data usage, are detailed. The combination of these two topics motivates a description of future systems requirements for DOE Climate Modeling efforts, focusing on the growth of data storage and network and disk bandwidth required to handle data at an acceptable rate.

Mayer, Benjamin W↗

V&V Framework

A Verification and Validation (V&V) framework is presented for the development and execution of coordinated modeling and experimental program s to assess the predictive capability of computational models of complex systems through focused, well structured, and formal processes. The elements of the framework are based on established V&V methodology developed by various organizations including the Department of Energy, National Aeronautics and Space Administration, the American Institute of Aeronautics and Astronautics, and the American Society of Mechanical Engineers. Four main topics are addressed: 1) Program planning based on expert elicitation of the modeling physics requirements, 2) experimental design for model assessment, 3) uncertainty quantification for experimental observations and computational model simulations, and 4) assessment of the model predictive capability. The audience for this document includes program planners, modelers, experimentalist, V &V specialist, and customers of the modeling results.

97 MATHEMATICS AND COMPUTING↗

Hot Topics From BaBar Experiment

The authors search for a new light non-Standard Model CP-odd Higgs boson, A{sup 0}, decaying to {tau}{sup +}{tau}{sup -}, {mu}{sup +}{mu}{sup -}, and invisible in radiative decays of the {Upsilon}(2S) and {Upsilon}(3S). We search for the light scalar particle produced in single-photon decays of the {Upsilon}(3S) resonance through the process {Upsilon}(3S) {yields} {gamma}A{sup 0}, A{sup 0} {yields} invisible. We also search for evidence of an undetectable {Upsilon}(1S) decay recoiling against the dipion system. The data samples contain 99 x 10{sup 6} {Upsilon}(2S) and 122 x 10{sup 6} {Upsilon}(3S) decays collected by the BABAR detector at the SLAC PEP-II B factory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA Passive Thermal Control Engineering Guidebook

The NASA Passive Thermal Control Engineering Guidebook provides recommendations, including best practices and lessons learned, related to the passive thermal control engineering discipline. Topics include analysis (including documentation and review), thermal hardware (design/selection, vendors, and integration), testing, and flight operations. The passive thermal discipline includes thermal control and thermal protection systems. The passive thermal control discipline, which is addressed in this Guidebook, is broad and covers internal and external systems, component passive thermal analysis, vehicle on-orbit attitude timeline analysis, integrated thermal analysis, various thermal control apparatus (heaters and controls, coatings, blankets and insulations, isolators, geometric design for view factors, materials emissivity/absorptivity properties), passive cooling of avionics, purge, vent, and drain for vehicle cavities and compartments, thermal model development and correlation, thermal cycle and thermal-vacuum testing. Topics related to thermal protection systems (TPS) are not within the scope of this document. The Guidebook provides a consolidated reference for early career as well as experienced engineers embarking on a new task. Leveraging the experience of the group minimizes the learning curve that exists at the start of new projects, reduces the risk of repeating mistakes, and improves the organization’s ability to deliver high-quality products efficiently. The intent of this document is to provide guidance based on collective experience, and is not intended impose constraints on project work. Best practices can vary substantially and it is important to apply judgment wisely based on careful consideration of the specific design and requirements. Implementation of the methods described will vary from project to project and should be applied in conjunction with the judgment of the thermal engineers performing and reviewing the work. The recommendations in this document are not intended to replace program, project, branch, Center, or NASA requirements and/or policies.

thermal↗

NASA Passive Thermal Control Engineering Guidebook

The NASA Passive Thermal Control Engineering Guidebook provides recommendations, including best practices and lessons learned, related to the passive thermal control engineering discipline. Topics include analysis (including documentation and review), thermal hardware (design/selection, vendors, and integration), testing, and flight operations. The passive thermal discipline includes thermal control and thermal protection systems. The passive thermal control discipline, which is addressed in this Guidebook, is broad and covers internal and external systems, component passive thermal analysis, vehicle on-orbit attitude timeline analysis, integrated thermal analysis, various thermal control apparatus (heaters and controls, coatings, blankets and insulations, isolators, geometric design for view factors, materials emissivity/absorptivity properties), passive cooling of avionics, purge, vent, and drain for vehicle cavities and compartments, thermal model development and correlation, thermal cycle and thermal-vacuum testing. Topics related to thermal protection systems (TPS) are not within the scope of this document. The Guidebook provides a consolidated reference for early career as well as experienced engineers embarking on a new task. Leveraging the experience of the group minimizes the learning curve that exists at the start of new projects, reduces the risk of repeating mistakes, and improves the organization’s ability to deliver high-quality products efficiently. The intent of this document is to provide guidance based on collective experience, and is not intended impose constraints on project work. Best practices can vary substantially and it is important to apply judgment wisely based on careful consideration of the specific design and requirements. Implementation of the methods described will vary from project to project and should be applied in conjunction with the judgment of the thermal engineers performing and reviewing the work. The recommendations in this document are not intended to replace program, project, branch, Center, or NASA requirements and/or policies.

thermal↗