Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

First principles investigation of the thermoelectric behavior of tin sulfide

We present the results of density-functional theory and Boltzmann transport calculations suggesting that the commonly available and inexpensive material SnS may show reasonable thermoelectric performance at temperatures suitable for exhaust waste-heat recovery, if the material can be heavily p-doped and if the mobility is not greatly degraded by high doping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electromechanical properties of freestanding graphene functionalized with tin oxide (SnO{sub 2}) nanoparticles

Freestanding graphene membranes were functionalized with SnO{sub 2} nanoparticles. A detailed procedure providing uniform coverage and chemical synthesis is presented. Elemental composition was determined using scanning electron microscopy combined with energy dispersive x-ray analysis. A technique called electrostatic-manipulation scanning tunneling microscopy was used to probe the electromechanical properties of functionalized freestanding graphene samples. We found ten times larger movement perpendicular to the plane compared to pristine freestanding graphene and propose a nanoparticle encapsulation model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomic layer deposition of Al{sub 2}O{sub 3} on germanium-tin (GeSn) and impact of wet chemical surface pre-treatment

GeSn is quickly emerging as a potential candidate for high performance Si-compatible transistor technology. Fabrication of high-ĸ gate stacks on GeSn with good interface properties is essential for realizing high performance field effect transistors based on this material system. We demonstrate an effective surface passivation scheme for n-Ge{sub 0.97}Sn{sub 0.03} alloy using atomic layer deposition (ALD) of Al{sub 2}O{sub 3}. The effect of pre-ALD wet chemical surface treatment is analyzed and shown to be critical in obtaining a good quality interface between GeSn and Al{sub 2}O{sub 3}. Using proper surface pre-treatment, mid-gap trap density for the Al{sub 2}O{sub 3}/GeSn interface of the order of 10{sup 12} cm{sup −2} has been achieved.

36 MATERIALS SCIENCE↗

Hydrogen in tin dioxide films and bulk ceramics: An attempt to identify the most hidden impurity

Hydrogen impurities in SnO{sub 2} films and bulk ceramics were investigated in terms of mass transport and electron transport. The hydrogen concentration (n[H]) in these samples was found to be 10{sup 19} cm{sup −3} or higher. Further increase in n[H] could be achieved by annealing the samples in a humid atmosphere. The isotope tracer ({sup 1}H/{sup 2}H exchange) study revealed that a part of the hydrogen in these samples showed rapid migration even at 300 °C. However, electrical measurements revealed that the electron concentration in the samples was much less than n[H]. These results could be explained by assuming the presence of defect-hydrogen complexes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron transport and defect structure in highly conducting reactively sputtered ultrathin tin oxide films

Electrical conduction behavior of ultrathin (5–110 nm) SnO{sub 2} films reactively sputtered at 150–400 °C substrate temperatures is presented. The surface roughness studies revealed that the films with lower thickness were smoother (≤0.6 nm). Stoichiometry/defect structure of the films obtained from X-ray photoelectron spectroscopy data and electron mobility are found to be dependent on film thickness and substrate temperature. The observed increase in conductivity of semi-metallic films with decrease in film thickness is attributed to changes in defect structure and surface roughness. Highest value of conductivity of about 715 Ω{sup −1} cm{sup −1} is obtained for 5 nm thick films deposited at 300 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Irradiation-induced nano-voids in strained tin precipitates in silicon

We report on self-assembling of spherically shaped voids in nanometer size strained Sn precipitates after irradiation with He{sup +} ions in different conditions. It is found that high-temperature irradiation induces vacancies which are collected by compressively strained Sn precipitates enhancing of out-diffusion of Sn atoms from the precipitates. Nano-voids formation takes place simultaneously with a β- to α-phase transformation in the Sn precipitates. Post-irradiation thermal treatment leads to the removal of voids and a backward transformation of the Sn phase to β-phase. Strain-enhanced separation of point defects along with vacancy assisted Sn out-diffusion and precipitate dissolution are discussed.

36 MATERIALS SCIENCE↗

Ballistic electron transport calculation of strained germanium-tin fin field-effect transistors

The dependence of ballistic electron current on Sn content, sidewall orientations, fin width, and uniaxial stress is theoretically studied for the GeSn fin field-effect transistors. Alloying Sn increases the direct Γ valley occupancy and enhances the injection velocity at virtual source node. (112{sup ¯}) sidewall gives the highest current enhancement due to the rapidly increasing Γ valley occupancy. The non-parabolicity of the Γ valley affects the occupancy significantly. However, uniaxial tensile stress and the shrinkage of fin width reduce the Γ valley occupancy, and the currents are enhanced by increasing occupancy of specific indirect L valleys with high injection velocity.

36 MATERIALS SCIENCE↗

Top-gate zinc tin oxide thin-film transistors with high bias and environmental stress stability

Top gated metal-oxide thin-film transistors (TFTs) provide two benefits compared to their conventional bottom-gate counterparts: (i) The gate dielectric may concomitantly serve as encapsulation layer for the TFT channel. (ii) Damage of the dielectric due to high-energetic particles during channel deposition can be avoided. In our work, the top-gate dielectric is prepared by ozone based atomic layer deposition at low temperatures. For ultra-low gas permeation rates, we introduce nano-laminates of Al{sub 2}O{sub 3}/ZrO{sub 2} as dielectrics. The resulting TFTs show a superior environmental stability even at elevated temperatures. Their outstanding stability vs. bias stress is benchmarked against bottom-gate devices with encapsulation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Indium tin oxide/InGaZnO bilayer stacks for enhanced mobility and optical stability in amorphous oxide thin film transistors

Optically more stable, high mobility InGaZnO thin film transistors were fabricated by implementing ultrathin In{sub 2}O{sub 3}-SnO{sub 2} (ITO) layers at the gate dielectric/semiconductor interface. The optimized device portrayed a high saturation mobility of ∼80 cm{sup 2}/V s with off current values lower than 10{sup −11}A. The ITO layer also acted as a hole filter layer, and hole current and threshold voltage shift values measured under negative bias illumination conditions showed that a significant amount of photo-generated charge carriers were annihilated before reaching the gate insulator. This effect was more evident at larger intensities, showing threshold voltage shift values reduced by more than ∼70% under stress conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photovoltaic effect in an indium-tin-oxide/ZnO/BiFeO{sub 3}/Pt heterostructure

We have studied the photovoltaic effect in a metal/semiconductor/ferroelectric/metal heterostructure of In{sub 2}O{sub 3}-SnO{sub 2}/ZnO/BiFeO{sub 3}/Pt (ITO/ZnO/BFO/Pt) multilayer thin films. The heterolayered structure shows a short-circuit current density (J{sub sc}) of 340 μA/cm{sup 2} and an energy conversion efficiency of up to 0.33% under blue monochromatic illumination. The photovoltaic mechanism, specifically in terms of the major generation site of photo-excited electron-hole (e-h) pairs and the driving forces for the separation of e-h pairs, is clarified. The significant increase in photocurrent of the ITO/ZnO/BFO/Pt compared to that of ITO/BFO/Pt is attributed to the abundant e-h pairs generated from ZnO. Ultraviolet photoelectron spectroscopy reveals the energy band alignment of ITO/ZnO/BFO/Pt, where a Schottky barrier and an n{sup +}-n junction are formed at the BFO/Pt and ZnO/BFO interfaces, respectively. Therefore, two built-in fields developed at the two interfaces are constructively responsible for the separation and transport of photo-excited e-h pairs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graphene/semiconductor silicon modified BiFeO{sub 3}/indium tin oxide ferroelectric photovoltaic device for transparent self-powered windows

We report photovoltaic response of highly transparent graphene/BiFe{sub 0.95}Si{sub 0.05}O{sub 3} (BFSiO)/ITO/glass derived from bottom-up spin coating technique. The device exhibits short-circuit-current (I{sub SC} 0.75 mA) with 1000 fold upsurge and open-circuit-voltage (V{sub OC} ∼ 0.45 V) under standard AM 1.5 illumination through graphene. In combination, I{sub SC} of 0.63 mA and V{sub OC} of 0.35 V for same illumination through ITO, reveals the prospects of harvesting indoor light. Also, crystallographic structure, red shift in band gap, leakage behavior, and ferroelectric characteristics of BFSiO thin films are reported. Reproducible transient response of I{sub SC} and V{sub OC} with quick switching (<100 ms) for 20 consecutive cycles and stability (95%) over test period of 16 weeks signifies high endurance and retentivity, promising for building integrated self-powered windows.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface plasmon polariton excitation by electrostatic modulation and phase grating in indium-tin-oxide coated lithium niobate slabs

Excitation of surface plasmon polaritons (SPPs) in a non-metal system in visible regime is discussed. With the assistance of phase grating resulted from photorefractive effect and electrostatic modulation of ITO induced by strong photovoltaic effect in iron-doped LiNbO{sub 3}, phase matching condition could be satisfied for SPP excitation in this semiconductor/dielectric system. Both the phase grating instead of metal grating and electrostatic modulation of semiconductor could be used for the design of tunable plasmonic devices based on nonlinear photorefractive crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A tunable amorphous p-type ternary oxide system: The highly mismatched alloy of copper tin oxide

The approach of combining two mismatched materials to form an amorphous alloy was used to synthesise ternary oxides of CuO and SnO{sub 2}. These materials were analysed across a range of compositions, and the electronic structure was modelled using density functional theory. In contrast to the gradual reduction in optical band gap, the films show a sharp reduction in both transparency and electrical resistivity with copper contents greater than 50%. Simulations indicate that this change is caused by a transition from a dominant Sn 5s to Cu 3d contribution to the upper valence band. A corresponding decrease in energetic disorder results in increased charge percolation pathways: a “compositional mobility edge.” Contributions from Cu(II) sub band-gap states are responsible for the reduction in optical transparency.

36 MATERIALS SCIENCE↗

Stabilization of the γ-Sn phase in tin nanoparticles and nanowires

Structures of Sn nanoparticles and nanowires are studied using density functional theory in conjunction with thermodynamic considerations. Besides the low-temperature α and room-temperature β phases, the high-temperature γ phase is considered. Results show that at ambient temperatures for sizes smaller than 50 nm, metallic β- and γ-Sn nanoparticles are more stable than semimetallic α-Sn ones because of their lower surface energies. Moreover, very small Sn nanostructures, exemplified by nanowires, are expected to exhibit the γ phase even at 0 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards monomaterial p-n junctions: Single-step fabrication of tin oxide films and their non-destructive characterisation by angle-dependent X-ray photoelectron spectroscopy

The application of a non-destructive method for characterization of electronic structure of an ultra-thin SnO{sub 1<x<2} layer synthesized by spin coating on Si wafers was demonstrated. Utilizing angle dependent XPS, we quantified stoichiometry changes inside the SnO{sub 1<x<2} layers of thickness comparable with the electron attenuation length. The O/Sn concentration varied from 1.25 near the SnO{sub x} surface to 1.10 near the substrate/overlayer interface. Deviations from ideal stoichiometry are caused by defects, and defect levels affect the band structure of the SnO{sub x} layers. By investigation of the valence band region, followed by main core level position tracking, changes of electronic parameters like energy levels shift were identified. The results indicated a downward energy levels shift by 0.45 eV in SnO{sub x} layers at the SiO{sub 2}/SnO{sub x} interface. In combination with the detected upward energy levels shift in the substrate's electronic structure, these results suggest a negative charge displacement across the SiO{sub 2} layer. As a consequence, there is a significant carrier concentration gradient in the layer, from a nearly insulating oxide at the SnO{sub x} surface to a semiconducting one at the bottom of the SnO{sub x} film. The results showed that the application of a simple and cost-effective method allows tuning the materials' properties towards the one-step fabrication of materials with ambipolar doping.

36 MATERIALS SCIENCE↗

Multiphonon excitations and pygmy resonances in tin isotopes

We study, within a semiclassical coupled-channels approach, the possible effects of anharmonicities and non linearities on the excitation of the so-called pygmy resonances in several Sn isotopes and using two different Skyrme interactions. In the energy region of the pygmy resonances, there are a few low-lying multiphonon states. The question is whether they may contribute to the observed peak. Calculations show that the inelastic cross sections in the relevant energy region have an increase that varies from 3% to 21% depending on the isotope and on the kind of Skyrme force used. At the same time, we have studied the nature of the pygmy resonance state by means of a new criterion to establish whether this state can be considered as a collective one.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗