Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “texture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

New evidence for interplanetary boulders?

The method of detection, the magnitude and the rate of occurrence of sudden disturbances in the motions of some short period comets are discussed. The disturbances have recently been suggested as potential indicators of collisions between the comets and interplanetary boulders - minor objects whose existence was predicted. The character of explosive phenomena, caused by an impact of such a boulder on a comet's nuclear surface, depends significantly on the surface texture of the target body. A method is suggested which supplies a good deal of the missing information about the structure and optical properties of nuclear surfaces from precise photometric observations of cometary nuclei at large solar distances.

Sekanina, Z.↗
NASA NTRS1973

Artificial meteor ablation studies

Artificial meteor ablation was performed on natural minerals, composed predominately of magnetite and hematite, using an arc heated plasma stream of air. Analysis of the ablated debris indicated most was composed of two or more minerals. The more volatile elements were depleted and the relative abundance of Fe increased as a result of both volatile depletion and a reduction in its oxidation state. Hematite was converted to magnetite in the ablation zone, and quartz and apatite minerals were converted to an Fe-rich glass consisting of varying amounts of Si, P, Cl, and Ca, depending upon the accessory minerals available at the time of melting. Artificially created ablation products from iron oxides exhibited unique properties depending on the composition of the original material and the environmental conditions of formation. In addition to the accepted elemental criteria, these properties were morphologic characteristics, textural parameters, and the existence of metastable minerals.

Blanchard, M. B.↗
NASA NTRS1974

Conductivity of boules of single crystal sodium beta-alumina

The ionic and electrochemical polarization characteristics of two boules of single crystal sodium beta-alumina (Na2O.8Al2O3), 2 cm in diameter, were investigated over the range of 25 to 300 C using 2- and 4-probe ac and dc techniques with reversible and ion-blocking electrodes. Textural (or internal) polarization at 27 C was present only in boule 1 which cleaved easily. Interfacial polarization, using solid sodium electrodes, was present at 27 C in the 2-probe conductivities for both boules. Cleaning with liquid sodium at 300 C reduced its magnitude, but some interfacial polarization was still present in the 2-probe conductivities for boule 2 below about 140 C. Above 140 C, with liquid sodium electrodes, the 2-probe conductivities, essentially polarization-free, were given by KT = 3300 exp(-3650/RT). The conductivity of boule 2 at 180 C remained essentially constant with increasing current density up to about 140 milliamps per square centimeter.

Fielder, W. L.↗
NASA NTRS1974

A quantitative study of the orientation bias of some edge detector schemes

The evaluation of a particular set of edge detection schemes is described. The results obtained are compared with those obtained from an edge detection scheme using a texture oriented approach. The orientational bias of these schemes is emphasized. Improved qualitative observations are reported and a comparison of the evaluation method with another edge detection evaluation method is presented.

Fram, J. R.↗
NASA NTRS1974

A study of the temporal changes recorded by ERTS and their geological significance

The temporal changes that are recorded by ERTS were evaluated for an area around Bathurst Inlet in the North West Territories. The seasons represented by the images included: early winter, spring, early summer, summer, and fall. Numerous surface characteristics (vegetation, drainage patterns, surface texture, lineament systems and topographic relief, etc.) were used to relate the change in observable features with the different seasons. It was found that the time of year when an observation is made has a strong control over the amount and type of information that can be derived by an experienced interpreter. It was concluded that a detailed study of temporal changes is an important part of any ERTS interpretation for geology.

Moore, H. D.↗
NASA NTRS1974

ERTS: A multispectral image analysis contribution for the geomorphological evaluation of southern Maracaibo Lake Basin

Multispectral analysis of ERTS-A images at scales of 1:1,000,000 and 1:500,000 has been conducted with conventional photointerpretation methods. Specific methods have been developed for the geomorphological analysis of southern Maracaibo Lake Basin which comprises part of the Venezuelan Andean Range, Perija Range, the Tachira gap and the Southern part of the Maracaibo Lake depression. A steplike analysis was conducted to separate macroforms, landscapes and relief units as well as drainage patterns and tectonic features, which permitted the delineation of tectonic provinces, stratigraphic units, geomorphologic units and geomorphologic positions. The geomorphologic synthesis obtained compares favorably with conventional analysis made on this area for accuracy of 1:100,000 scale, and in some features with details obtained through conventional analysis for accuracy of 1:15,000 and field work. Geomorphological units in the mountains were identified according to changes in tone, texture, forms orientation of interfluves and tectonic characteristics which control interfluvial disimetrics.

Salas, F.↗
NASA NTRS1974

TDNiCr (ni-20Cr-2ThO2) forging studies

Elevated temperature tensile and stress rupture properties were evaluated for forged TDNiCr (Ni-20Cr-2ThO2) and related to thermomechanical history and microstructure. Forging temperature and final annealed condition had pronounced influences on grain size which, in turn, was related to high temperature strength. Tensile strength improved by a factor of 8 as grain size changed from 1 to 150 microns. Stress-rupture strength was improved by a factor of 3 to 5 by a grain size increase from 10 to 1000 microns. Some contributions to the elevated temperature strength of very large grain material may also occur from the development of a strong texture and a preponderance of small twins. Other conditions promoting the improvement of high temperature strength were: an increase of total reduction, forging which continued the metal deformation inherent in the starting material, a low forging speed, and prior deformation by extrusion. The mechanical properties of optimally forged TDNiCr compared favorably to those of high strength sheet developed for space shuttle application.

Filippi, A. M.↗
NASA NTRS1974

The use of color infrared aerial photography in determining salt marsh vegetation and delimiting man-made structures of Lynnhaven Bay, Virginia

Color infrared aerial photography was found to be superior to color aerial photography in an ecological study of Lynnhaven Bay, Virginia. The research was divided into three phases: (1) Determination of the feasibility of correlating color infrared aerial photography with saline wetland species composition and zonation patterns, (2) determination of the accuracy of the aerial interpretation and problems related to the aerial method used; and (3) comparison of developed with undeveloped areas along Lynnhaven Bay's shoreline. Wetland species composition and plant community zonation bands were compared with aerial infrared photography and resulted in a high degree of correlation. Problems existed with changing physical conditions; time of day, aircraft angle and sun angle, making it necessary to use several different characteristics in wetland species identification. The main characteristics used were known zonation patterns, textural signatures and color tones. Lynnhaven Bay's shoreline was 61.5 percent developed.

Holman, R. E., III↗
NASA NTRS1974

Phase equilibria study of pseudobrookite type minerals

Pseudobrookite, is found in volcanic rocks, and the mineral armalcolite ((Fe,Mg)Ti2O5) found in the Apollo 11 and subsequent lunar samples seems to be unique to the moon. In plutonic rocks on the earth, ilmenite and rutile were found with what appears to be an equilibrium liquidus texture, while on the moon armalcolite often appears to be the primary liquidus phase among Ti-oxides. This suggests that total pressure may be a factor in the formation of these minerals, and a knowledge of the phase relations in this system yields information about the pressure under which a given magma crystallized.

Friel, J. J.↗
NASA NTRS1973

Identification of soil associations in South Dakota on ERTS 1 imagery

Soil association maps show the spatial relationships of land units developed in unique climatic, geologic, and topographic environments, and having characteristic slopes, soil depths, textures, available water capacities, permeabilities, and the like. From these characteristics of the soil, broad interpretations can be made such as how the soil is suited for various agronomic and engineering uses. ERTS-1 imagery was found to be a useful tool in the identification of soil associations since it provides a synoptic view of an 8 million acre scene, which is large enough so that the effect can be seen on soils of climate, topography, and geology. A regional view also allows soil associations to be observed over most, if not all, of their extent. This aids in selecting typical sampling sites and provides a check on the homogeneity of the associations.

Westin, F. C.↗
NASA NTRS1973

Comparative evaluation of spatial features in automatic land use classification from photographic imagery

Five spatial features have been evaluated for their applicability in automatic land use classification of photographic imagery. Data arrays of approximately 10,000 square meters were classified on the basis of an 8 by 8 point data array. Statistical features, information features, sequency features and texture features were evaluated using a distance to prototype classifier and an adaptive classifier. The results indicate approximately 70% accuracy in the classification.

Herzog, J. H.↗
NASA NTRS1974

Lunar petrology conference

Papers delivered at the conference, held in July, 1973, in Houston, are reviewed. The prominent topics include the recognition of primary highland rock types, the nature of lunar breccias, the calculation of mineral equilibration in breccias as a temperature-time function, the nature of lunar regolith, a classification of mare basalts based on composition and texture, and current theories of origin of mare basalts. An attempt to evaluate the relation between the earliest period of lunar evolution and the available lunar data is also noted.

Ridley, W. I.↗
NASA NTRS1974

Origin of the high-temperature fraction of C2 chondrites

The coarse-grained fraction of C2 chondrites is composed mostly of single crystals and aggregates of crystals of Mg-rich olivine and pyroxene. They do not possess compelling textural evidence of being the solidification products of rapidly-quenched molten droplets. Metal inclusions in the silicates contain 3.82-8.88 mole% Ni, 0.16-0.70% Co, 0.17-1.07% Cr, and up to 5.70% P. Thermodynamic calculations show that alloys of these compositions may be condensates from the solar nebula. The implication is that the high-temperature fraction of C2 chondrites consists mostly of high-temperature condensates.

Grossman, L.↗
NASA NTRS1973

Preliminary stratigraphy of the Apollo 15 drill core

The crew of Apollo 15 collected a 242-cm-long core of the regolith developed on the surface of Palus Putredinus (3 deg 39 min 20 sec E, 26 deg 26 min 00 sec N). This core consists of 42 major textural units, which range from a few millimeters to 13 cm thick. The regolith at this site was deposited layer by layer, each layer having been reworked, to some degree, by micrometeorite bombardment. The particle composition of six layers for which samples were obtained varies in a random fashion, thus supporting the heterogeneous, layered model of the regolith. The ratio of lithic fragments derived from the Apennine Front to that derived from the mare surface is about 1:1. This lithic ratio, in a regolith section 3.75 km from the base of the front, is an indication of the efficiency of lateral transport of soil by impact processes and mass wasting.

Heiken, G.↗
NASA NTRS1973

Scanning electron microscope study of Apollo 15 green glass

Apollo 15 green glass droplets and related forms show a variety of low velocity impact features which occurred at the time of formation of the droplets. Composite forms, which consist of a crystallized core on which mounds of glass adhere, indicate a sequence of core formation and crystallization, followed by impact of molten droplets. The complicated and time dependent texture and morphology of the green glass forms are best explained by formation in a volcanic lava fountain rather than by meteorite impact.

Mckay, D. S.↗
NASA NTRS1973

Electron petrography of Apollo 14 and 15 breccias and shock-produced analogs

Six lunar breccias were studied in detail by optical and transmission electron microscopy and separated into two classes on the basis of presence or absence of recovery and recrystallization textures: Class A breccias with no recrystallization include samples 14063, 14301, and 15498; Class B breccias with recrystallization include samples 14321, 15455, and 15418. Samples of Apollo 16 soil (65010) experimentally shocked to 50, 100, and 250 kilobars pressure were sectioned and studied for comparison with the breccias. It is concluded that the Class A breccias were formed from unconsolidated lunar regolith by deformation due to shock waves of a few tens of kilobars. The Class B breccias could also have been produced from unconsolidated material at higher shock stresses, the annealing being achieved by the heating resulting from the shock deformation.

Christie, J. M.↗
NASA NTRS1973

Mineralogy and petrology of some Apollo 16 rocks and fines - General petrologic model of moon

Data published in the literature and original results of mineralogical and petrological analyses of Apollo 16 rocks and fines indicate that Apollo 16 and Luna 20 sites are dominated by plagioclase-rich rocks with minor olivine and/or pyroxene. Data suggest that shock, brecciation, and recrystallization have largely eliminated primary textures. In general, all data are consistent with derivation from ejecta blankets produced from plagioclase-rich rocks by impacts. The lunar crust is discussed as a product of an early differentiation of the entire moon, and Mg/Fe data for experimental olivine-liquid and olivine-orthopyroxene equilibria are used as constraints to examine compositional data for rocks, glasses, and fragments in the light of specific models for crystal-liquid differentiation.

Steele, I. M.↗
NASA NTRS1973

Sample 67955 - A description and a problem

Clasts in breccia sample 67955 contain relatively coarse olivine and plagioclase in part enveloped by poikilitic hypersthene and diopside. This distinctive texture is concluded to result from high temperature crystallization in the presence of a fluid phase, probably a silicate melt. A problem posed by this rock is whether the bulk chemistry, characterized by a high Mg/Fe ratio but low total Fe + Mg, is the result of primary igneous processes on the moon or whether it is the residual end product of a multiple distillation process resulting from repeated meteorite impacts.

Hollister, L. S.↗