Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “system flexibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Laboratory system for demonstrating spacecraft processing of multispectral image data

The various elements of the Information Adaptive System (IAS) program are discussed along with the design features, approaches, and algorithms employed within the system. This program was initiated by NASA in order to develop an adaptable data processing system which will accommodate high speed multispectral image data in the real-time spacecraft environment. The development of this system is examined, including the test and support equipment required to evaluate and demonstrate the operational performance of the system in terms of the applicability of the design to high speed onboard processing. In addition to a high throughput rate capability, this system will be flexible, programmable, and capable of adapting its operation to external commands and characteristics of the data stream.

Meredith, B. D.↗
NASA NTRS1984

Operational awareness in future space transportation system concepts and technology selections

An analysis of operations for a two-stage, fully reusable future space transportation system has been performed, and the results are discussed. The value of conducting an analysis of operations in the conceptual design phase to produce a highly productive system was demonstrated by obtaining estimated reductions in resources and ground turnaround time and comparing them with estimated mature Shuttle program requirements. Cooperative efforts by users, future vehicle designers, and operations analysts during the conceptual design phase are shown to produce an efficient vehicle design with broad market potential. The synergistic effects of vehicle design configuration, subsystems, and procedures can enhance productivity of the transportation system as measured by flexibility, availability, and viability. Advanced technologies and subsystems beneficial to such a system are identified.

Eide, D. G.↗
NASA NTRS1984

High temperature performance of flexible thermal protection materials

Aero convective tests of several flexible thermal protection system (FTPS) concepts were conducted in the NASA Ames Research Center 20 MW arcjet aero heating wind tunnel. The concepts consisted of quilted insulation blankets with nextel AB312 felt insulation stitched between cover cloths with AB312 thread. The cover cloths were commercially available nextel AB312 and nicalon fabrics. The specimens were subjected to convective heat fluxes ranging from 7 to 35 Btu/per sq ft per sec at stagnation pressures of .005 to .02 atm. Specimens were tested both with and without transpiration cooling. Results indicated that both the nextel and nicalon fabrics offer the potential for higher temperature applications than current FTPS, and nicalon appears to be capable of withstanding temperatures well above 2500 degrees F with minimal degradation.

Savage, R. T.↗
NASA NTRS1985

Effect of processing treatments on strength of silica thread for quilted ceramic insulation on Space Shuttle

The effects of chemical, mechanical, and thermal processing treatments on the preflight strength properties of a silica sewing thread used to fabricate an external flexible Thermal Protection System (TPS) for the Space Shuttle vehicle are discussed. Below 540 C, loss of strength was observed for all treatments studied, but above conditioning temperatures of 540 C little change in strength properties was measured, indicating no appreciable mechanical damage to the yarn as a consequence of these processing treatments.

Sawko, P. M.↗
NASA NTRS1985

Experimental verification and practical application of torquewhirl theory of rotordynamic instability

A theory developed by Vance in 1978 to explain the destabilizing effect of torque on a whirling rotor was experimentally verified. The measurements made on a specially designed test apparatus are described. New computer models were also developed to investigate the effect of torque on rotordynamic stability of multidisk flexible rotor bearing systems. The effect of torque was found to be most pronounced when the system is already marginally stable from other influences. The modifications required to include torque in a typical shaft transfer matrix are described, and results are shown which identify the type of rotor design most sensitive to load torque.

Vance, J. M.↗
NASA NTRS1987

A TREETOPS simulation of the Hubble Space Telescope-High Gain Antenna interaction

Virtually any project dealing with the control of a Large Space Structure (LSS) will involve some level of verification by digital computer simulation. While the Hubble Space Telescope might not normally be included in a discussion of LSS, it is presented to highlight a recently developed simulation and analysis program named TREETOPS. TREETOPS provides digital simulation, linearization, and control system interaction of flexible, multibody spacecraft which admit to a point-connected tree topology. The HST application of TREETOPS is intended to familiarize the LSS community with TREETOPS by presenting a user perspective of its key features.

Sharkey, John P.↗
NASA NTRS1987

Notes on implementation of Coulomb friction in coupled dynamical simulations

A coupled dynamical system is defined as an assembly of rigid/flexible bodies that may be coupled by kinematic connections. The interfaces between bodies are modeled using hinges having 0 to 6 degrees of freedom. The equations of motion are presented for a mechanical system of n flexible bodies in a topological tree configuration. The Lagrange form of the D'Alembert principle was employed to derive the equations. The equations of motion are augmented by the kinematic constraint equations. This augmentation is accomplished via the method of singular value decomposition.

Vandervoort, R. J.↗
NASA NTRS1986

A design for a new catalog manager and associated file management for the Land Analysis System (LAS)

Due to the larger number of different types of files used in an image processing system, a mechanism for file management beyond the bounds of typical operating systems is necessary. The Transportable Applications Executive (TAE) Catalog Manager was written to meet this need. Land Analysis System (LAS) users at the EROS Data Center (EDC) encountered some problems in using the TAE catalog manager, including catalog corruption, networking difficulties, and lack of a reliable tape storage and retrieval capability. These problems, coupled with the complexity of the TAE catalog manager, led to the decision to design a new file management system for LAS, tailored to the needs of the EDC user community. This design effort, which addressed catalog management, label services, associated data management, and enhancements to LAS applications, is described. The new file management design will provide many benefits including improved system integration, increased flexibility, enhanced reliability, enhanced portability, improved performance, and improved maintainability.

Greenhagen, Cheryl↗
NASA NTRS1986

Design of robust failure detection filters

An essential aspect of the design of control systems for large, flexible spacecraft is fault tolerance. Because it is anticipated that a large number of sensors and actuators will be required to realize good control over these assemblies, the detection and isolation of component failures cannot be based on direct comparisons among replicated components. Instead, the notion of 'analytic redundancy' must be employed for the FDI function. Unfortunately this makes the FDI function sensitive to modeling errors which are certain to exist in the large space structure problem due to model truncation and parameter uncertainty. This paper addresses the robustness to model error of one method of FDI residual generation - the failure detection filter. Initial designs were found to be extremely sensitive to modeling error. The sources of this sensitivity are analyzed and modifications to the design are suggested. The improved filter is shown to have much better visibility of the failure signatures relative to the background due to modeling error.

San Martin, A. M.↗
NASA NTRS1988

Filling the expertise gap

Aeroelasticity, structures, and stability-and-control specialists can work in concerted fashion during the early design phases of future aircraft to achieve active control of naturally unstable configurations. In order to take full advantage of active control, attention must be given by designers to control-law synthesis, and to tools for the efficient synthesis and analysis of complex flexible-aircraft control systems. Analysts must consider interfaces among unsteady aerodynamics, structures, and control theory, as explored by the theory of analytic continuation for unsteady aerodynamics.

Abel, Irving↗
NASA NTRS1989

Simulation Of Satellite Trajectories And Navigation

Orbit Analysis and Simulation Software, OASIS, is software system developed for covariance and simulation analyses of problems involving Earth satellites, especially Global Positioning System (GPS). Provides flexible, versatile, and efficient software tool for analysis of accuracy in Earth-satellite navigation and GPS-based geodetic studies.

Wu, Sien-Chong↗
NASA NTRS1988

Robust multivariable control of large space structures

The problem of designing attitude-control systems for large flexible space structures is considered. The difficulties which arise because of special dynamic characteristics are described, and methods for overcoming them using two type of controllers are presented. The first type of controller considered is a model-based compensator (MBC) and the second is the 'dissipative' controller which employs output feedback. Based on the analytical and numerical results obtained, the MBC can offer good performance under normal conditions, while the dissipative controller offers more robustness but perhaps reduced performance in situations involving larger uncertainties.

Joshi, Suresh M.↗
NASA NTRS1989

Composite multilayer insulations for thermal protection of aerospace vehicles

Composite flexible multilayer insulation systems (MLI), consisting of alternating layers of metal foil and scrim cloth or insulation quilted together using ceramic thread, were evaluated for thermal performance and compared with a silica fibrous (baseline) insulation system. The systems studied included: (1) alternating layers of aluminoborosilicate (ABS) scrim cloth and stainless steel foil, with silica, ABS, or alumina insulation; (2) alternating layers of scrim cloth and aluminum foil, with silica or ABS insulation; (3) alternating layers of alumininum foil and silica or ABS insulation; and (4) alternating layers of aluminum-coated polyimide placed on the bottom of the silica insulation. The MLIs containing aluminum were the most efficient, measuring as little as half the backface temperature increase of the baseline system.

Kourtides, D. A.↗
NASA NTRS1990

On the continuous dependence with respect to sampling of the linear quadratic regulator problem for distributed parameter systems

The convergence of solutions to the discrete or sampled time linear quadratic regulator problem and associated Riccati equation for infinite dimensional systems to the solutions to the corresponding continuous time problem and equation, as the length of the sampling interval (the sampling rate) tends toward zero (infinity) is established. Both the finite and infinite time horizon problems are studied. In the finite time horizon case, strong continuity of the operators which define the control system and performance index together with a stability and consistency condition on the sampling scheme are required. For the infinite time horizon problem, in addition, the sampled systems must be stabilizable and detectable, uniformly with respect to the sampling rate. Classes of systems for which this condition can be verified are discussed. Results of numerical studies involving the control of a heat/diffusion equation, a hereditary of delay system, and a flexible beam are presented and discussed.

Rosen, I. G.↗
NASA NTRS1989

Composite multilayer insulations for thermal protection of aerospace vehicles

Composite flexible multilayer insulation systems (MLI), consisting of alternating layers of metal foil and scrim cloth or insulation quilted together using ceramic thread, were evaluated for thermal performance and compared with a silica fibrous (baseline) insulation system. The systems studied included: (1) alternating layers of aluminoborosilicate (ABS) scrim cloth and stainless steel foil, with silica, ABS, or alumina insulation; (2) alternating layers of scrim cloth and aluminum foil, with silica or ABS insulation; (3) alternating layers of aluminum foil and silica or ABS insulation; and (4) alternating layers of aluminum-coated polyimide placed on the bottom of the silica insulation. The MLIs containing aluminum were the most efficient, measuring as little as half the backface temperature increase of the baseline system.

Kourtides, Demetrius A.↗
NASA NTRS1989

A non-homogeneous Markov model for phased-mission reliability analysis

Three assumptions of Markov modeling for reliability of phased-mission systems that limit flexibility of representation are identified. The proposed generalization has the ability to represent state-dependent behavior, handle phases of random duration using globally time-dependent distributions of phase change time, and model globally time-dependent failure and repair rates. The approach is based on a single nonhomogeneous Markov model in which the concept of state transition is extended to include globally time-dependent phase changes. Phase change times are specified using nonoverlapping distributions with probability distribution functions that are zero outside assigned time intervals; the time intervals are ordered according to the phases. A comparison between a numerical solution of the model and simulation demonstrates that the numerical solution can be several times faster than simulation.

Smotherman, Mark↗
NASA NTRS1990

The NASA/LRC Computerized Test System

A new testing package, including apparatus and tasks for the behavioral study of a number of species in a variety of experiments is presented. The package is described with respect to the kinds of comparative psychological investigations for which it is best suited. The preliminary data generated within this new testing paradigm demonstrate that the NASA/LRC Computerized Test System provides a flexible yet powerful environment for the investigation of behavioral and psychological processes.

Richardson, W. Kirk↗