SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
System aids in therapeutic retraining of damaged muscles or functions as walking support during therapy. Articulated harness assembly contains patient, suspension system supports harness assembly in such a way as to counterbalance exertion of external forces on patient.
Unit with 2W power increase and slightly larger overall dimensions performs as well as or better than its gas-bearing counterpart. Liquid-bearings are built by reworking serviceable gas-bearing components /sleeves, endplates, and cylinders/. Hydrostatic bearing is self-centered, requiring no magnetic suspension or centering jewel.
Cable suspension and inclined walkway system for simulating reduced or zero gravity environments
Piezoelectric pump for supplying fluid at high frequencies to gyroscope fluid suspension system
Snatch force during lines-first deployment of aerodynamic decelerator, including effects of canopy skirt acceleration and suspension wave propagation characteristics
An investigation has been conducted in the Langley 20-foot free spinning tunnel to study the relative behavior in descent of a number of homogeneous balsa bodies of revolution simulating anti-personnel bombs with a small cylindrical exploding device suspended approximately 10 feet below the bomb. The bodies of revolution included hemispherical, near-hemispherical, and near-paraboloid shapes. The ordinates of one near-paraboloid shape were specified by the Office of the Chief of Ordnance, U. S. Army. The behavior of the various bodies without the cylinder was also investigated. The results of the investigation indicated that several of the bodies descended vertically with their longitudinal axis, suspension line, and small cylinder in a vertical attitude,. However, the body, the ordinates of which had been specified by the Office of the Chief of Ordnance, U. S. Army, oscillated considerably from a vertical attitude while descending and therefore appeared unsuitable for its intended use. The behavior of this body became satisfactory when its center of gravity was moved well forward from its original position. In general, the results indicated that the descent characteristics of the bodies of revolution become more favorable as their shapes approached that of a hemisphere.
Chemical method for separating oil from water by liquid barrier which can be positioned magnetically is described. Fluorocarbon liquids containing colloidal suspension of magnetite is proposed. Chemical composition of magnetite and fluorinated ether polymer are presented.
Triangular wheel and suspension vehicle is described which can scale obstacle higher than its own length.
A free-flight test program to determine the deployment characteristics of all-flexible parawings was conducted. Both single-keel and twin-keel parawings having a wing area of 4000 square feet with a five-stage reefing system were tested by use of a bomb-type instrumented test vehicle. Several twin-keel-parawing tests were also made by using an instrumented controllable sled-type test vehicle. The systems were launched from either a C-130 or a C-119 carrier airplane, and a programer parachute was used to bring the test vehicle to a proper dynamic pressure and near-vertical flight path prior to deployment of the parawing system. The free-flight deployment loads data are presented in the form of time histories of individual suspension-line loads and total loads.
A flight computer functional executive design for the reusable shuttle is presented. The design is given in the form of functional flowcharts and prose description. Techniques utilized in the regulation of process flow to accomplish activation, resource allocation, suspension, termination, and error masking based on process primitives are considered. Preliminary estimates of main storage utilization by the Executive are furnished. Conclusions and recommendations for timely, effective software-hardware integration in the reusable shuttle avionics system are proposed.
A sixteen-inch rotor, weighing approximately twenty-one pounds, was supported by air-lubricated foil bearings. In physical size and in mass distribution, the rotor closely matched that of an experimental Brayton cycle turboalternator unit. The rotor was stable in both vertical horizontal attitudes at speeds up to 50,000 rpm. A detailed description of the experimental apparatus and of the foil bearing design are given. The paper contains data on response of the rotor to rotating imbalance, symmetric and asymmetric, and to excitation by means of a vibrator (shake table). It is concluded that the gas-lubricated foil bearing suspension is free from fractional frequency whirl and suffers no loss of load capacity when excited at frequency equal to half the rotational speed. In contrast to rigid gas bearings, the foil bearing imposes no stringent requirements with respect to dimensional tolerances, cleanliness, or limitations of journal motion within the narrow confines of bearing clearance.
A cryogenic gravity meter made of two parts, a magnetic suspension unit and a detection module, was used to monitor earth eigen vibrations. The magnetic field and field gradient are generated by energizing a set of superconducting coils made of niobium-zirconium alloy wire. The detection module is a double Josephson junction magnetometer. The output is printed on a chart recorder and later digitized using a computer; a Fourier transformation is performed on the accumulated data. The measurements of eigen vibrations are summarized in tabular and graphical representations.
The feasibility of a tape transport chemiluminescence system for bacterial monitoring of regenerated water was demonstrated using a manually operated laboratory breadboard. The principle of detection is based on measuring the increase in chemiluminescence produced by the catalytic action of bacterial porphyrins on a luminol-hydrogen peroxide mixture. Viable organisms are distinguished from nonviable by comparing the signals of incubated and unincubated water samples. Using optimized protocols, sensitivities were obtained with 400 ml suspensions of E. coli and Cl. sporogenes. The sensitivity of the unincubated cycle E. coli (aerobe) was found to be 30 to 35 cells/m1, and that of the Cl. sporogenes (anaerobe) was 1000 to 10,000 cells/m1. The lower sensitivity toward Cl. sporogenes is attributed to several factors, namely the lower cytochrome content, the tendency to sporulate, long lag periods and the lower growth rate of Clostridia in general. The operational procedures used for processing the incubated and unincubated samples involved the following sequence: (1) concentrating the sample by filtration through a membrane filter, (2) washing with Dextrose-Thioglycollate Broth (3) incubating (0 to 4 hrs as required), (4) washing with 4M Urea, and (5) reacting with reagent in front of a photomultiplier tube. The signal output was recorded on a strip chart recorder.
Cryogenic properties of solids and slush hydrogen heat transfer are investigated, as well as hydrocarbon suspension. Solid hydrogen and slush hydrogen instrumentation are also studied.
An organism capable of utilizing parathion as the sole carbon and energy source was isolated by enrichment culture techniques. The bacterium was characterized and tentatively classified as Pseudomonas aeruginosa. A pH of 7.0 - 7.5 and temperature of 30 C were found to be optimum for the consumption of parathion. Virtually no oxygen utilization was observed with resting cell suspensions when nonsolubilized parathion was employed. The use of ethanol as solvent for parathion in resting cell studies or preincubation of cells in ethanol obviated this problem and rapid parathion oxidation was demonstrable. Approximately 80% of the parathion consumed by resting cells was present terminally as carbon dioxide. Permeability of the cell to parathion or its metabolites was contingent upon the use of ethanol as either solvent or denaturant. Metabolites were tentatively identified by thin layer chromatography.
There are no author-identified significant results in this report. ERTS-1 imagery was received from NASA in both positive and negative form. This imagery was analyzed to determine the hydrologic features of the water mass, including current patterns, particulate in suspension, and the contacts between different water masses, as well as coastal marsh characteristics. A Spectral Data Model 64 multispectral projector/viewer was used for the analysis. Quick look analysis of the second generation negatives indicated that: (1) green spectral band lacked contrast and was overexposed; (2) red spectral had acceptable contrast, but somewhat overexposed; and (3) infrared bands overexposed for land areas, but exposure good for water. Analysis of second generation positives indicated that; (1) green spectral band extremely flat; (2) red spectral band of acceptable contrast, but too dense for projection; and (3) infrared bands lacked detail in both water and land areas. Photographs indicate that it is necessary to expose and process the multispectral imagery for the scene brightness range under consideration.
Supersonic wind-tunnel tests were conducted with disk-gap-band parachute models having a nominal diameter of 1.65 meters and geometric porosities of 10.0, 12.5, and 15.0 percent. Canopy inflation characteristics, angles of attack, and drag performance are presented for deployment behind forebody base extensions which were free to oscillate in pitch and yaw. The effect of increasing suspension-line length on canopy motions and drag performance is included, and the drag performance of a model with 12.5 percent geometric porosity is compared with results from flight tests of a parachute with a nominal diameter of 12.19 meters.
Obtained reflectance properties of green and blue-green unialgae are evaluated for determining the feasibility of using selected wavelengths in differentiating between green and blue-green algae. The attempt is made to establish selected wavelengths and ratios that would delineate relative concentrations of the algal suspensions. The results should prove helpful in the selection of spectral bands usable in conjunction with multispectrum scanners for qualitative and quantitative studies of algae in bodies of water.