Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface waters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Sensor-Equipped Unmanned Surface Vehicle for High-Resolution Mapping of Water Quality in Low- to Mid-Order Streams

Longitudinal profiling of water quality via the deployment of sensors from watercraft has advanced the understanding of spatial patterns in large rivers and lakes; however, a similar approach in low- to mid-order streams is lacking. To fill this gap, we developed an unmanned surface vehicle (USV)-water quality measurement platform (the “AquaBOT”). The components of the AquaBOT included a nitrate sensor, multiparameter sonde (temperature, conductivity, turbidity, dissolved oxygen, chlorophyll), quantum sensor, and global positioning system (GPS) mounted to a small pontoon-style USV. The AquaBOT was tested in four streams and rivers in Iowa and Tennessee. All measured water quality parameters varied longitudinally, and greater ranges were generally observed along the low-order, agriculturally influenced streams in Iowa. Nitrate, in particular, was spatially heterogeneous. For example, during one run in early June, concentrations ranged from 10.5 to 12.5 mg N L –1 along a 2.3 km reach and hotspots were observed directly downstream of some tile drains. The spatial resolution of AquaBOT data collected in June was 10× higher than grab sampling data, and measurements were collected in less time and at a comparable cost. Here, the AquaBOT can complement existing measurement approaches and will lead to advancements in understanding the processes driving water quality along the stream-to-river continuum.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Improved Representations of Longwave Surface Emissivity to Reduce Surface and Atmospheric Heating Biases in Earth System Models

Abstract Many Earth system models (ESMs) approximate surface emissivity as a broadband constant. This approximation reduces the computational burden, yet omits the spectral structure of emissivity and atmospheric absorption. Neglecting spectral variation in surface emission introduces biases in longwave (LW) atmospheric fluxes and heating. Biases are strongest over surfaces with strongly varying emissivity and minimal atmospheric opacity. We examine these biases over water, ice, and snow surfaces. We partition spectral emissivity into the 16 spectral bands utilized by a single‐column atmospheric radiative transfer model (RRTMG_LW) commonly used in ESMs. We quantify flux and heating biases introduced by broadband assumptions relative to the spectrally resolved case for standard atmospheric profiles over each surface type. Current assumptions tend to overestimate upwelling surface fluxes; for example, the greybody assumption overestimates flux by 1.6 W/m 2 (0.52%) at the bottom of a mid‐latitude winter atmosphere over ice, and by 2.33 (1.0%) at the top of atmosphere. The blackbody assumption tends to artificially cool Earth's surface, stabilizing the lower troposphere. Interestingly, the optimal broadband emissivity can deviate from the Planck‐weighted mean by up to 3% depending on surface type and atmospheric profile. We investigate bias sensitivity to surface temperature, cloud water path, and atmospheric water vapor. Bias is most sensitive to water vapor content, and least sensitive to cloud water path. Lastly, we show that a modified greybody method with updated broadband values can reduce total surface flux bias up to 1.69 , comparable to a five‐band approach and at a fraction of the computational cost.

Manzo, L. [Department of Earth System Science Univ↗
DOE OSTI2024

Elucidate the molecular basis of ampholytic chitosan as a high-performance cryoprotectant to myosin denaturation: The importance of saccharide charges

The uses of charged poly/oligo-saccharides enable the retarding of protein denaturation against various environmental stresses during food storage and manufacturing. However, at subzero temperatures, the molecular basis of such stabilization behaviors, i.e., cryoprotections, remain less explored. Here, in this study, we introduced an ampholytic saccharide, carboxymethyl chitooligosaccharide (CMCO) that effectively inhibited the freezing-induced myosin denaturation. The in-depth cryoprotective mechanism was systematically investigated by using molecular dynamic simulation and multispectral characterizations. Results showed that CMCO may interact with myosin through hydrogen bonding and electrostatic interactions, which caused the expelling of water at protein surfaces and the reduced conformational flexibility of myosin molecules. Due to this water replacement event, both secondary and ternary structures of myosin became freezing-resistant, leading to the inhibited protein aggregations and retained functionalities, such as solubility, Ca 2+ -ATPase activity, and gelling properties. Moreover, cryoprotective behaviors of CMCO were charge-dependent. CMCO with a higher degree of carboxymethyl substitution (DS: 1.2) was inclined to bind and stabilize myosin molecules better than the low-DS (DS: 0.8) one, even though both outperformed other cryoprotective saccharides. Therefore, this investigation not only introducing a high-performance myosin cryoprotectant, but also elaborated the cryoprotective mechanism of ampholytic saccharides.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Effects of surface treatments on ABS mechanical properties from fused filament fabrication

This paper examines the influence of surface treatments on the mechanical properties of acrylonitrile butadiene styrene (ABS) samples printed by fused filament fabrication (FFF). Prior efforts have applied brushing, painting, solvent dipping, infiltration, and vapor smoothing as post-processing surface treatments to improve the mechanical properties of FFF components. Additionally, because FFF can produce components with undesirable surface roughness, mechanical abrasion, epoxy coating, and acetone treatment may increase tensile strength by decreasing stress concentrations. Ridged surface texture may provide desirable tribological or handling properties. Based on these opportunities, this paper investigates abrasive media blasting, epoxy coating, acetone immersion, and ridged texturing surface treatments on the tensile strength and other mechanical properties of FFF ABS samples. ASTM D638-14 Type-I samples were printed, treated on all sample sides, and tested. From tensile tests, the elastic modulus, tensile strength, and fracture strain for both the untreated and treated ABS samples were calculated. For each sample, the surface finish and fracture macromorphology were observed with optical microscopy and the roughness values for the surface finish were calculated from profilometer data. Furthermore, samples were submerged in water and weighed periodically to measure mass changes due to water absorption. From surface profilometry and optical miscopy data, mechanical media blasting, epoxy coating, and immersion in all concentrations of acetone decreased surface roughness. Overall, on average, grit blasting with large beads and epoxy coating led to 2.6% and 1.2% increases in tensile strength, respectively; immersion in 40% acetone led to a 1.9% increase in tensile strength while treatment in 60% and 80% acetone decreased tensile strength by 4.9% and 1.9%, respectively. The study concludes that only grit blasting with large beads, immersion in 60% acetone, and the ridged texture significantly affected the tensile strength.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Elucidating the Role of Water on Limonene Oxidation with H 2 O 2 over γ -Al 2 O 3

Limonene oxide, which is produced from limonene epoxidation, is a valuable molecule that can be applied in flavor, fragrance, and renewable polymer applications. A catalytic reaction system using H 2 O 2 with γ-Al 2 O 3 and ethyl acetate (EtOAc) as the solvent has been explored as an effective system for this reaction. In these previous studies, a number of postulates have been proposed as to how water affects the reaction; therefore, the focus of this work is to elucidate the role of water in limonene epoxidation. While not impacting the selectivity to limonene oxide, the amount of water in the reaction system is shown to significantly impact the limonene reactivity. Furthermore, through both addition of excess water and removal of water with a Dean–Stark apparatus, the control of the H 2 O 2 /H 2 O ratio is demonstrated to be the primary factor controlling reactivity. In contrast, changes in limonene concentrations for a specific H 2 O 2 /H 2 O ratio are shown to have little impact on the reaction rate. This study shows that the competitive adsorption of H 2 O 2 and water on the catalyst surface is key in explaining the water impact on the reaction performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Digital Twin for Chemical Science: a case study on water interactions on the Ag(111) surface

Directly visualizing chemical trajectories offers insights into catalysis, gas-phase reactions and photoinduced dynamics. Tracking the transformation of chemical species is best achieved by coupling theory and experiment. Here we developed Digital Twin for Chemical Science (DTCS) v.01, which integrates theory, experiment and their bidirectional feedback loops into a unified platform for chemical characterization. DTCS addresses a core question: given a set of experimental conditions, what is the expected outcome and why? It consists of a forward solver that takes a chemical reaction network and predicts spectra under experimental conditions, and an inverse solver that infers kinetics from measured spectra. We applied DTCS to ambient-pressure X-ray photoelectron spectroscopy measurements of the Ag–H2O interface as an example. This approach enables real-time knowledge extraction and guides experiments until a stopping condition is met based on accuracy and degeneracy. As a step toward autonomous chemical characterization, DTCS provides mechanistic knowledge in a verified, standardized manner.

Chemistry↗
DOE OSTI2022

Surface ionization waves propagating over non-planar substrates: wavy surfaces, cut-pores and droplets

Atmospheric pressure plasmas intersecting with dielectric surfaces will often transition into surface ionization waves (SIWs). Several applications of these discharges are purposely configured to be SIWs. During propagation of an SIW over a dielectric surface, the plasma charges the surface while responding to changes in geometrical and electrical material properties. This is particularly important for non-planar surfaces where polarization of the dielectric results in local electric field enhancement. In this paper, we discuss results from computational investigations of negative and positive SIWs propagating over nonplanar dielectrics in three configurations—wavy surfaces, cuts through porous materials and water droplets on flat surfaces. Here we found that negative SIWs are particularly sensitive to the electric field enhancement that occurs at the crests of non-planar surfaces. The local increase in ionization rates by the electric field enhancement can result in the SIW detaching from the surface, which produces non-uniform plasma exposure of the surface. Positive SIWs tend to adhere to the surface to a greater degree. These trends indicate that treatment of pathogen containing droplets on surfaces may be best performed by positive SIWs. The same principles apply to the surfaces cut through pores. Buried pores with small openings to the SIW may be filled by plasma by either flow of plasma into the pore (large opening) or initiated by photoionization (small opening), depending on the size of the opening compared to the Debye length.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Integrating environmental understanding into freshwater floatovoltaic deployment using an effects hierarchy and decision trees

Abstract In an era of looming land scarcity and environmental degradation, the development of low carbon energy systems without adverse impacts on land and land-based resources is a global challenge. ‘Floatovoltaic’ energy systems—comprising floating photovoltaic (PV) panels over water—are an appealing source of low carbon energy as they spare land for other uses and attain greater electricity outputs compared to land-based systems. However, to date little is understood of the impacts of floatovoltaics on the hosting water body. Anticipating changes to water body processes, properties and services owing to floatovoltaic deployment represents a critical knowledge gap that may result in poor societal choices and water body governance. Here, we developed a theoretically-derived hierarchical effects framework for the assessment of floatovoltaic impacts on freshwater water bodies, emphasising ecological interactions. We describe how the presence of floatovoltaic systems may dramatically alter the air-water interface, with subsequent implications for surface meteorology, air-water fluxes and physical, chemical and biological properties of the recipient water body. We apply knowledge from this framework to delineate three response typologies—‘ magnitude’ , those for which the direction and magnitude of effect can be predicted; ‘ direction’ , those for which only the direction of effect can be predicted; and ‘ uncertain’ , those for which the response cannot be predicted—characterised by the relative importance of levels in the effects hierarchy. Illustrative decision trees are developed for an example water body response within each typology, specifically, evaporative water loss, cyanobacterial biomass, and phosphorus release from bed sediments, and implications for ecosystem services, including climate regulation, are discussed. Finally, the potential to use the new understanding of likely ecosystem perturbations to direct floatovoltaic design innovations and identify future research priorities is outlined, showcasing how inter-sectoral collaboration and environmental science can inform and optimise this low carbon, land-sparing renewable energy for ecosystem gains.

Environmental Sciences & Ecology↗
DOE OSTI2021

Coupling Surface Flow with High-performance Subsurface Reactive Flow and Transport Code PFLOTRAN

Water exchange between the surface and subsurface is important for both water resource management and environmental protection. In this paper, we develop coupled surface and subsurface flow simulation capability in a parallel subsurface flow and reactive transport code PFLOTRAN. We sequentially couple the diffusion wave-based surface flow with the subsurface flow governedby the Richards equation in PFLOTRAN. These two flow domains are linked with a boundary condition switching method that ensures continuity of pressure and flux at the surface-subsurface interface. We verify the coupled code against other existing hydrologic models and observation data using a number of numerical experiments. The coupled hydrological model exhibits good performance in strong parallel scaling tests. The new coupled surface and subsurface simulator significantly advance community simulation capability towards improving integrated hydrologic and biogeochemical understanding of complex systems such as watersheds and river corridors. Keywords: Surface flow, Integrated hydrological modeling, Boundary condition switching, Parallel computing

Wu, Runjian↗
DOE OSTI2021

Mineralogical and microstructural alterations in a portland cement paste after an accelerated decalcification process

Cement paste leaching and concomitant decalcification is a common cause of concrete structure deterioration. Such alterations entail microstructural changes that condition concrete durability. This study analysed those changes in cement pastes exposed to accelerated decalcification, layer-by-layer, from the surface in contact with the leaching agent, 6 M NH{sub 4}NO{sub 3,} to the unaltered area. The microstructural changes were analysed with BSEM, MIP and BET whilst the mineralogical and nanostructural alterations in each layer were assessed with XRD, FTIR, {sup 29}Si and {sup 27}Al MAS NMR and BSD. Decalcification affected not only portlandite and CSH gel, but also the anhydrous clinker and ettringite, inducing major micro- and nano-structural changes, particularly in the two layers closest to the leaching agent. CSH gel decalcification was more intense in the outer layers where long chain gels co-existed with silicon rich gels. BDS, in turn, revealed differences between the amount of bound water in the surface interfacing with the leaching agent and in the leaching front. More specifically, larger numbers of water molecules were tightly bound to silanol groups in the outer, whereas hydroxyl group distribution was more orderly in the inner layers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Environmental controls on isolated convection during the Amazonian wet season

The Amazon rainforest is a vital component of the global climate system, influencing the hydrological cycle and tropical circulation. However, understanding and modeling the evolution of convection in this region remain a scientific challenge. Here, we assess the environmental conditions associated with shallow, congestus, and isolated deep convection days during the wet season (December to April), employing measurements from the Green Ocean Amazon 2014–2015 (GoAmazon2014/5) experiment and large-scale wind fields from the constrained variational analysis. Composites of deep days show moister than average conditions below 3 km early in the morning. Analyzing the water budget at the surface through observations only, we estimated the water vapor convergence term as a residual of the water balance closure. Convergence remains nearly zero during the deep days until early afternoon (13:00 LST), when it becomes a dominant factor in the water budget. At 14:00 LST, the deep days experience a robust upward large-scale vertical velocity, especially above 4 km, which supports the shallow-to-deep convective transition occurring around 16:00–17:00 LST. In contrast, shallow and congestus days exhibit drier pre-convective conditions, along with diurnal water vapor divergence and large-scale subsidence that extend from the surface to the lower free troposphere. Moreover, afternoon precipitation exhibits the strongest linear correlation (0.6) with large-scale vertical velocity, nearly double the magnitude observed for other environmental factors, even moisture, at different levels and periods of the day. Precipitation also exhibits a moderate increase with low-level wind shear, while upper-level shear has a relatively minor negative impact on convection.

Environmental Sciences & Ecology↗
DOE OSTI2023

Surface Processes Control the Fate of Reactive Oxidants Generated by Electrochemical Activation of Hydrogen Peroxide on Stainless-Steel Electrodes

Low-cost stainless-steel electrodes can activate hydrogen peroxide (H 2 O 2 ) by converting it into a hydroxyl radical ( • OH) and other reactive oxidants. At an applied potential of +0.020 V, the stainless-steel electrode produced • OH with a yield that was over an order of magnitude higher than that reported for other systems that employ iron oxides as catalysts under circumneutral pH conditions. Decreasing the applied potential at pH 8 and 9 enhanced the rate of H 2 O 2 loss by shifting the process to a reaction mechanism that resulted in the formation of an Fe(IV) species. Significant metal leaching was only observed under acidic pH conditions (i.e., at pH <6), with the release of dissolved Fe and Cr occurring as the thickness of the passivation layer decreased. Despite the relatively high yield of • OH production under circumneutral pH conditions, most of the oxidants were scavenged by the electrode surface when contaminant concentrations comparable to those expected in drinking water sources were tested. The stainless-steel electrode efficiently removed trace organic contaminants from an authentic surface water sample without contaminating the water with Fe and Cr. With further development, stainless-steel electrodes could provide a cost-effective alternative to other H 2 O 2 activation processes, such as those by ultraviolet light.

42 ENGINEERING↗
DOE OSTI2021

Peeling back the layers: Investigating the effects of polyelectrolyte layering on surface structure and stability of oil-in-water nanoemulsions

Layer-by-layer deposition of polyelectrolytes is a useful technique for modifying surface functionalities. For drug delivery systems, alternating layers of biopolymers coat nanoemulsions, which house and protect the cargo until the time and destination of delivery. In this report we investigate molecular factors contributing to the stability and interfacial properties of nanoemulsions prepared by a co-adsorption of polymers poly(styrene sulfonate) and polyethylenimine (PEI), and surfactant dodecyltrimethylammonium bromide. We hypothesize the interplay between electrosteric and hydrophobic effects upon multi-polymer co-adsorption contributes to both macroscopic and molecular-level interfacial properties of nanoemulsions. To probe interfacial layering properties, we use vibrational sum frequency scattering spectroscopy with ζ -potential measurements to determine the adsorptive behavior and molecular conformational arrangement of the polymer layers. Complementing these interfacial studies are dynamic light scattering experiments measuring the nanoemulsion size distribution and polydispersity index over a 30-day period. Our light scattering, ζ -potential, and spectroscopic results of the nanoemulsion surface show that the duration of droplet stability and the degree of molecular orientation of adsorbed polymers can be tuned by surfactant concentration, PEI concentration, and pH. These results illustrate how molecular surface properties of multi-polymer coated nanoemulsions contribute to synergistic effects and droplet stability, enabling advancements in applications surrounding biopharmaceuticals, cosmetics, and food sciences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗