Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Space Environment Testing of Photovoltaic Array Systems at NASA's Marshall Space Flight Center

To successfully operate a photovoltaic (PV) array system in space requires planning and testing to account for the effects of the space environment. It is critical to understand space environment interactions not only on the PV components, but also the array substrate materials, wiring harnesses, connectors, and protection circuitry (e.g. blocking diodes). Key elements of the space environment which must be accounted for in a PV system design include: Solar Photon Radiation, Charged Particle Radiation, Plasma, and Thermal Cycling. While solar photon radiation is central to generating power in PV systems, the complete spectrum includes short wavelength ultraviolet components, which photo-ionize materials, as well as long wavelength infrared which heat materials. High energy electron radiation has been demonstrated to significantly reduce the output power of III-V type PV cells; and proton radiation damages material surfaces - often impacting coverglasses and antireflective coatings. Plasma environments influence electrostatic charging of PV array materials, and must be understood to ensure that long duration arcs do not form and potentially destroy PV cells. Thermal cycling impacts all components on a PV array by inducing stresses due to thermal expansion and contraction. Given such demanding environments, and the complexity of structures and materials that form a PV array system, mission success can only be ensured through realistic testing in the laboratory. NASA's Marshall Space Flight Center has developed a broad space environment test capability to allow PV array designers and manufacturers to verify their system's integrity and avoid costly on-orbit failures. The Marshall Space Flight Center test capabilities are available to government, commercial, and university customers. Test solutions are tailored to meet the customer's needs, and can include performance assessments, such as flash testing in the case of PV cells.

Phillips, Brandon S.↗
NASA NTRS2015

Variability in the Propagation Phase of CFD-Based Noise Prediction: Summary of Results From Category 8 of the BANC-III Workshop

The usage of Computational Fluid Dynamics (CFD) in noise prediction typically has been a two part process: accurately predicting the flow conditions in the near-field and then propagating the noise from the near-field to the observer. Due to the increase in computing power and the cost benefit when weighed against wind tunnel testing, the usage of CFD to estimate the local flow field of complex geometrical structures has become more routine. Recently, the Benchmark problems in Airframe Noise Computation (BANC) workshops have provided a community focus on accurately simulating the local flow field near the body with various CFD approaches. However, to date, little effort has been given into assessing the impact of the propagation phase of noise prediction. This paper includes results from the BANC-III workshop which explores variability in the propagation phase of CFD-based noise prediction. This includes two test cases: an analytical solution of a quadrupole source near a sphere and a computational solution around a nose landing gear. Agreement between three codes was very good for the analytic test case, but CFD-based noise predictions indicate that the propagation phase can introduce 3dB or more of variability in noise predictions.

Lopes, Leonard↗
NASA NTRS2017

Tutorial for Collecting and Processing Images of Composite Structures to Determine the Fiber Volume Fraction

Fiber-reinforced composite structures have become more common in aerospace components due to their light weight and structural efficiency. In general, the strength and stiffness of a composite structure are directly related to the fiber volume fraction, which is defined as the fraction of fiber volume to total volume of the composite. The most common method to measure the fiber volume fraction is acid digestion, which is a useful method when the total weight of the composite, the fiber weight, and the total weight can easily be obtained. However, acid digestion is a destructive test, so the material will no longer be available for additional characterization. Acid digestion can also be difficult to machine out specific components of a composite structure with complex geometries. These disadvantages of acid digestion led the author to develop a method to calculate the fiber volume fraction. The developed method uses optical microscopy to calculate the fiber area fraction based on images of the cross section of the composite. The fiber area fraction and fiber volume fraction are understood to be the same, based on the assumption that the shape and size of the fibers are consistent in the depth of the composite. This tutorial explains the developed method for optically determining fiber area fraction performed at NASA Langley Research Center.

Conklin, Lindsey↗
NASA NTRS2017

Development of Solid-State Nanopore Technology for Life Detection

Biomarkers for life on Earth are an important starting point to guide the search for life elsewhere. However, the search for life beyond Earth should incorporate technologies capable of recognizing an array of potential biomarkers beyond what we see on Earth, in order to minimize the risk of false negatives from life detection missions. With this in mind, charged linear polymers may be a universal signature for life, due to their ability to store information while also inherently reducing the tendency of complex tertiary structure formation that significantly inhibit replication. Thus, these molecules are attractive targets for biosignature detection as potential "self-sustaining chemical signatures." Examples of charged linear polymers, or polyelectrolytes, include deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) as well as synthetic polyelectrolytes that could potentially support life, including threose nucleic acid (TNA) and other xenonucleic acids (XNAs). Nanopore analysis is a novel technology that has been developed for singlemolecule sequencing with exquisite single nucleotide resolution which is also well-suited for analysis of polyelectrolyte molecules. Nanopore analysis has the ability to detect repeating sequences of electrical charges in organic linear polymers, and it is not molecule- specific (i.e. it is not restricted to only DNA or RNA). In this sense, it is a better life detection technique than approaches that are based on specific molecules, such as the polymerase chain reaction (PCR), which requires that the molecule being detected be composed of DNA.

Bywaters, K. B.↗
NASA NTRS2017

Modelling and Holographic Visualization of Space Radiation-Induced DNA Damage

Space radiation is composed by a mixture of ions of different energies. Among these, heavy inos are of particular importance because their health effects are poorly understood. In. the recent years, a software named RITRACKS (Relativistic Ion Tracks) was developed to simulate the detailed radiation track structure, several DNA models and DNA damage. As the DNA structure is complex due to packing, it is difficult to the damage using a regular computer screen.

Plante, Ianik↗
NASA NTRS2018

The Best Educational Tool for Interdisciplinary Earth Science Giovanni

Accessing and using NASA Earth science data has commonly presented a challenge to many educators and students, due to issues such as heterogeneous data formats, complex data structures, large volumes of data storage, special programming requirements, and diverse analytical software options that often require a significant investment in time and resources, especially for novices. By facilitating data access and evaluation, as well as promoting open access to create a more level playing field for non-funded scientists, NASA Earth observation data can be more readily used for scientific discovery and societal benefits. To advance this goal, the NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) developed the Geospatial Interactive Online Visualization ANd aNalysis Infrastructure (Giovanni). To date, Giovanni has assisted researchers around the world publish over 1300 peer-reviewed papers in a wide range of Earth science disciplines. In this presentation, we will demonstrate how easy it is to use Giovanni for the rapid creation of many different analyses of both weather and climate events.

interdisciplinary↗
NASA NTRS2018

Challenges in Development of Online Visualization and Analysis Tools for Satellite Data

Over the years, various online visualization and analysis tools have been developed to facilitate satellite data access and help scientific users around the world to conduct research and develop applications (e.g., data product evaluation, what-if questions, etc.). For those who are new to satellite data products, using them can be a daunting task due to many obstacles in data processing such as data formats, complex data structures, special software packages, unfamiliar terminology, etc., especially when one is not sure whether a dataset is suitable for his/er research project. Even for experienced users, developing software for data processing and analysis can be a costly and time-consuming task. Online visualization tools can overcome many of these difficulties and allow users to focus on scientific questions. For example, Giovanni (the Geospatial Interactive Online Visualization and Analysis Infrastructure, https://giovanni.gsfc.nasa.gov), developed by the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), allows access over 1900 satellite and model variables in 82 measurement groups of 8 disciplines without downloading data and software. Main features include basic functions for data analysis and visualization, data provenance, output data in different formats (ASCII, NetCDF, GeoTIFF), and more. Over the years, ~1700 peer-reviewed publications in different disciplines have been benefited from Giovanni in research activities (e.g. initial investigation, what-if questions, product evaluation). Despite the success of online visualization and analysis tools, challenges and new opportunities still exist and more can be done with new requirements and technology. Examples are: a) how to increase the efficiency of dataset search by enhancing intuitive aspects; b) how to facilitate interdisciplinary research; c) how to provide data quality information; d) how to engage users to participate in data quality assessment; and more. NASA Earth Observing System Data and Information System (EOSDIS) satellite-based data products are processed at various levels ranging from Level 0 to Level 4. While most users use data products at higher levels (Level-3 and 4), products at lower levels are still important for case studies, algorithm development, ground validation, etc. In this presentation, we will use Giovanni as an example to present and discuss challenges and near-future opportunities for satellite data online visualization and analysis tools.

Liu, Zhong↗
NASA NTRS2017

A Model-Based, Bayesian Solution for Characterization of Complex Damage Scenarios in Aerospace Composite Structures

Ultrasonic damage detection and characterization is commonly used in nondestructive evaluation (NDE) of aerospace composite components. In recent years there has been an increased development of guided wave based methods. In real materials and structures, these dispersive waves result in complicated behavior in the presence of complex damage scenarios. Model-based characterization methods utilize accurate three dimensional finite element models (FEMs) of guided wave interaction with realistic damage scenarios to aid in defect identification and classification. This work describes an inverse solution for realistic composite damage characterization by comparing the wavenumber-frequency spectra of experimental and simulated ultrasonic inspections. The composite laminate material properties are first verified through a Bayesian solution (Markov chain Monte Carlo), enabling uncertainty quantification surrounding the characterization. A study is undertaken to assess the efficacy of the proposed damage model and comparative metrics between the experimental and simulated output. The FEM is then parameterized with a damage model capable of describing the typical complex damage created by impact events in composites. The damage is characterized through a transdimensional Markov chain Monte Carlo solution, enabling a flexible damage model capable of adapting to the complex damage geometry investigated here. The posterior probability distributions of the individual delamination petals as well as the overall envelope of the damage site are determined.

H. Reed↗
NASA NTRS2021

Validation of IASI Satellite Ammonia Observations at the Pixel Scale Using In Situ Vertical Profiles

Satellite ammonia (NH 3 ) observations provide unprecedented insights into NH3 emissions, spatiotemporal variabilities and trends, but validation with in situ measurements remains lacking. Here, total columns from the Infrared Atmospheric Sounding Interferometer (IASI) were intercompared to boundary layer NH 3 profiles derived from aircraft- and surface-based measurements primarily in Colorado, USA, in the summer of 2014. IASI-NH 3 version 3 near real-time data set compared well to in situ derived columns (windows ±15 km around centroid, ±1 h around overpass time) with a correlation of 0.58, a slope of 0.78 ± 0.14 and an intercept of 2.1 × 10 15 ±1.5 × 10 15 molecules cm −2 . Agreement degrades at larger spatiotemporal windows, consistent with the short atmospheric lifetime of NH 3 . We also examined IASI version 3R data, which relies on temperature retrievals from the ERA Reanalysis, and a third product generated using aircraft-measured temperature profiles. The overall agreement improves slightly for both cases, and neither is biased within their combined measurement errors. Thus, spatiotemporal averaging of IASI over large windows can be used to reduce retrieval noise. Nonetheless, sampling artifacts of airborne NH 3 instruments result in significant uncertainties of the in situ-derived columns. For example, large validation differences exist between ascent and descent profiles, and the assumptions of the free tropospheric NH 3 profiles used above the aircraft ceiling significantly impact the validation. Because short-lived species like NH 3 largely reside within the boundary layer with complex vertical structures, more comprehensive validation is needed across a wide range of environments. More accurate and widespread in situ NH 3 data sets are therefore required for improved validations of satellite products.

Ammonia↗
NASA NTRS2020

Physical Simulation Of Rocket Exhaust Aerodynamics Using Heated Ethane: Prototypical Experiments

An inaugural experimental investigation into the use of heated ethane as a motive fluid for subscale simulation of rocket exhaust plume aerodynamics has been conducted. A small, self-contained, hydrocarbon aerodynamics test stand was designed and fabricated for this purpose. Testing was performed on an aerodynamic system comprised of a 77:1 upper stage nozzle contour coupled with a passive second-throat supersonic diffuser, specifically selected for its known LOX/GH2 hot-fire performance and complex shock structure. Effects of ethane purity and stagnation temperature on the accuracy of flow field replication have been examined. All major flow features present in hot-fire tests were reproduced in heated ethane with start and unstart pressure ratio errors of approximately +4% and -5%, respectively. Steady-state test cell pressure ratio errors of ±0.5% were shown to be readily achievable when the stagnation temperature was well-controlled. Ambient-temperature nitrogen testing was also conducted for the purpose of direct comparison of the ethane method to conventional cold-flow techniques. However, its higher isentropic exponent prevented the diffuser from achieving start.

rocket↗
NASA NTRS2021

Predicting the Functional State of Protein Kinases Using Interpretable Graph Neural Networks

Kinases are a family of proteins that function as molecular switches, regulating several essential cellular activities such as cell proliferation. Dysfunctional kinases are implicated in several types of cancers and hence they are actively pursued as drug targets. Given the vast number of complex kinase structures that are available in the protein data bank (PDB), there is a necessity to develop methodologies that can identify structurally important moieties of the kinases in an automated fashion, for such techniques can be instrumental in identifying novel drug targets. In this work, we develop a graph neural network (GNN) based deep learning framework for classifying the functionally active and inactive states of a large set of eukaryotic protein kinases, making use of their 3D structure from the PDB. We show that GNN based machine learning models can classify protein states with an accuracy greater than 97%. We further use the GNN models to automatically identify regions of the kinases that are important for its function. For this purpose, Gradient-weighted Class Activation Mapping (Grad-CAM) was implemented on the protein graphs. Remarkably, Grad-CAM consistently identifies the highly conserved DFG motif as the most important part of the protein across the entire kinome, without any prior input. Other regions of the hydrophobic core such as the HRD motif were also identified by the interpretable GNN framework, consistent with the literature. We discuss the significance of each of these regions in detail.

Ashwin Ravichandran↗
NASA NTRSDate not supplied

Characterizing Porous and Nonporous Phenolic Resins from Molecular Dynamics Simulations

Phenolic resins are an important component of many ablative heat shield materials, which protect spacecrafts from the extreme temperatures reached during atmospheric entry. Examples include the high-density Heritage Carbon Phenolic (HCP) used in the Pioneer-Venus and Galileo missions, as well as the low-density Phenolic Impregnated Carbon Ablator (PICA) used in the Mars Science Laboratory and Mars 2020 missions. Additionally, recent developments within NASA have produced the mid-density Heatshield for Extreme Entry Environment Technology (HEEET) and its derivative 3D Woven Mid-Density Carbon Phenolic (3MDCP). Unlike the nonporous phenolic in HCP, PICA and HEEET/3MDCP are fabricated by infusing preforms with diluted phenolic formulations to obtain a lower density porous matrix. Despite the importance of the phenolic phase to the material response during entry, the variation in properties of porous and nonporous phenolic is not well understood. Here, we present an investigation of porous and nonporous phenolic resins using molecular dynamics (MD) simulations. Resin cure is mimicked in the simulations through the inclusion of representative reaction templates to generate accurate models of the complex crosslinked structures. To create porous models, explicit solvent molecules are included during the cure simulations. We observe nanoscale separation of the phenolic and solvent phases, which results in significant differences in the final structures of porous and nonporous models. In addition to a quantitative assessment of the network structure and porosity, we elucidate the effects of the phenolic formulation on the final material properties. These results are compared with experimental data as appropriate.

phenolic↗
NASA NTRS2021

Coexisting Quantum Gases in Earth’s Orbit

Summary: Ultracold atomic gases provide a unique tool for exploring the quantum nature of matter and for probing the foundations of modern physics. Researchers with NASA’s Cold Atom Lab (CAL) have now simultaneously produced gases of two atomic species (rubidium and potassium) in a uniquely quantum (wave-like) phase of matter called a Bose-Einstein condensate (BEC) for the first time in space. CAL scientists are using the unique micro gravity environment onboard the International Space Station to study interactions, molecule formation, and the emergence of structure and complexity in these coexisting dual-species gases at unprecedented low temperatures, for long times in free fall, and specifically in the absence of the perturbing force of gravity.

quantum gases↗
NASA NTRS2023

ALMA Observations of Molecular Complexity in the Large Magellanic Cloud: Probing the Star-forming Region N 160

Hot molecular cores represent one of the earliest stages of high mass star formation, yet the number of known extragalactic hot cores is currently very small (six). A typical Galactic hot core found around a forming massive star is small, dense, hot, and it is rich in complex organic molecules (COMs; six or more atoms including carbon). In this presentation, we report the results of 1.2 mm continuum and molecular line single-pointing observations with the Atacama Large Millimeter/submillimeter Array (ALMA) of the field in the Large Magellanic Cloud (LMC) we dubbed N160A–mm. The goal of our study is to investigate the chemical complexity in this region and search for hot cores. The LMC is an ideal location for studying hot core chemistry in an environment distinctly different from the Milky Way due to its lower metallicity and strong UV radiation. N160A–mm is located in the star-forming region N160 south of 30 Doradus. It hosts two dominant young stellar objects and water (H2O), methanol (CH3OH), and hydroxyl (OH) masers, indicating ongoing star formation. We detect six 1.2 mm continuum sources, five of which are associated with the CH3OH emission peaks and/or extended emission. Methyl cyanide (CH3CN), another COM, is found towards the brightest continuum source in N160A–mm (N160A–mm A), and smaller molecules typically associated with Galactic hot cores (e.g., SO2, SO) are detected in four sources. Using spectral modeling, we estimate the rotational temperatures and column densities of the continuum sources. Based on the derived temperature of above 100 K, we identify N160–mm A as a hot core candidate. Most of the sources in N160A–mm exhibit a complex kinematic structure, providing evidence for large scale motions in the region (e.g., outflows, rotation). We compare the molecular abundances measured for N160-mm A to those found in Galactic hot cores and other LMC hot cores to investigate the impact of the environment on hot core chemistry.

Amanda Broadmeadow↗
NASA NTRSDate not supplied

Consolidation of Braided Carbon Fiber/ Thermoplastic Tubes by Induction Heating

Thermoplastic composites have experienced renewed enthusiasm within the U.S. aerospace industry, due in part to opportunities for rapidly manufacturing large structures. Unlike the lengthy cure cycles required by thermosets, the thermoplastic matrix prepreg requires only heat and pressure to consolidate consecutive layers of material; with sufficient inter-ply contact time to develop a strong interface. The manufacturing requirements for thermoplastics provide manufacturing flexibility and of particular interest are in-situ consolidation processes; i.e consolidation during layup on a tool. In-situ consolidation removes the time-consuming and costly secondary processing step of autoclave or press consolidation. Process variables which contribute to laminate quality include temperature, heat transfer, inter-ply contact time, and consolidation pressure. Most of the work to date related to in-situ consolidation has been in conjunction with automated fiber placement (AFP), where prepreg tows are consolidated when placed on the tool. Considering this process for a braided structure adds complexity relative to AFP due to the rapid lay-down rate of the braider and simultaneous placement of a multiple prepreg tows. Processes considered for consolidation during AFP could not be applied to a braided part. Alternatively, a fully braided preform could be consolidated on the tool using well established thermoplastic welding techniques. The goal of this effort was to evaluate the effectiveness of induction welding to consolidate braided carbon fiber/thermoplastic composite tubes up to eight plies in thickness. The manufacturing process, thermal characterization, and initial mechanical property data of the consolidated tubes are reported.

In-situ consolidation, induction heating/welding, ↗
NASA NTRS2023

The Eruption of a Magnetic Flux Rope Observed By Solar Orbiter and Parker Solar Probe

Magnetic flux ropes are a key component of coronal mass ejections, forming the core of these eruptive phenomena. However, determining whether a flux rope is present prior to eruption onset and, if so, the rope’s handedness and the number of turns that any helical field lines make is difficult without magnetic field modelling or in-situ detection of the flux rope. We present two distinct observations of plasma flows along a filament channel on 4 and 5 September 2022 made using the Solar Orbiter spacecraft. Each plasma flow exhibited helical motions in a right-handed sense as the plasma moved from the source active region across the solar disk to the quiet Sun, suggesting that the magnetic configuration of the filament channel contains a flux rope with positive chirality and at least one turn. The length and velocity of the plasma flow increased from the first to the second observation, suggesting evolution of the flux rope, with the flux rope subsequently erupting within ∼5 hours of the second plasma flow. The erupting flux rope then passed over the Parker Solar Probe spacecraft during its Encounter 13, enabling in-situ diagnostics of the structure. Although complex and consistent with the flux rope erupting from underneath the heliospheric current sheet, the in-situ measurements support the inference of a right-handed flux rope from remote-sensing observations. These observations provide a unique insight into the eruption and evolution of a magnetic flux rope near the Sun.

Dynamics↗
NASA NTRS2023

The Eruption of A Magnetic Flux Rope Observed By Solar Orbiter and Parker Solar Probe

Magnetic flux ropes are a key component of coronal mass ejections, forming the core of these eruptive phenomena. However, determining whether a flux rope is present prior to eruption onset and, if so, the rope's handedness and the number of turns that any helical field lines make is difficult without magnetic field modeling or in situ detection of the flux rope. We present two distinct observations of plasma flows along a filament channel on 2022 September 4 and 5 made using the Solar Orbiter spacecraft. Each plasma flow exhibited helical motions in a right-handed sense as the plasma moved from the source active region across the solar disk to the quiet Sun, suggesting that the magnetic configuration of the filament channel contains a flux rope with positive chirality and at least one turn. The length and velocity of the plasma flow increased from the first to the second observation, suggesting evolution of the flux rope, with the flux rope subsequently erupting within ∼5 hr of the second plasma flow. The erupting flux rope then passed over the Parker Solar Probe spacecraft during its encounter (13), enabling in situ diagnostics of the structure. Although complex and consistent with the flux rope erupting from underneath the heliospheric current sheet, the in situ measurements support the inference of a right-handed flux rope from remote-sensing observations. These observations provide a unique insight into the eruption and evolution of a magnetic flux rope near the Sun.

David M. Long↗
NASA NTRSDate not supplied

Emergence of Complex Modes in Lightly Damped Structural Systems

In this short presentation format, we will provide a set of useful equations, relationships, and physical interpretations direct from the damped two-mode interaction problem. We will demonstrate that the results from the two-mode interaction problem are in direct agreement with observed test data. Practical methods for estimating the parameters driving the relations direct from modal test data are provided. We finalize with two examples demonstrating weak and strong interactions.

spaceflight hardware↗