Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stress fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Phase field modelling of stressed grain growth: Analytical study and the effect of microstructural length scale

We establish the correlation between the diffuse interface and sharp interface descriptions for stressed grain boundary migration by presenting analytical solutions for stressed migration of a circular grain boundary in a bicrystalline phase field domain. The validity and accuracy of the phase field model is investigated by comparing the phase field simulation results against analytical solutions. The phase field model can reproduce precise boundary kinetics and stress evolution provided that a thermodynamically consistent theory and proper expressions for model parameters in terms of physical material properties are employed. Quantitative phase field simulations are then employed to investigate the effect of microstructural length scale on microstructure and texture evolution by stressed grain growth in an elastically deformed polycrystalline aggregate. The simulation results reveal a transitional behaviour from normal to abnormal grain growth by increasing the microstructural length scale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Manifestation of excess centers of electron-hole pair generation resulting from field and thermal stresses and their subsequent annihilation in dynamic current-voltage characteristics of Si-MOS structures with ultrathin oxide

Formation of centers of electron-hole pair generation near the silicon-oxide interface under field and thermal effects on Si-MOS structures with ultrathin oxide and poststress annihilation of these structures are studied. Concentrations of generation centers of minority charge carriers (holes) are determined from experimental dynamic current-voltage characteristics of Si-MOS diodes by fixing the accumulation duration of the equilibrium hole density near the surface separating the semiconductor and insulator during the sample transition from a deep depletion state to a pronounced inversion state. It is shown that MOS structures with ultrathin oxide are much more 'pliable' to field and thermal stresses in comparison with samples with thick a insulating layer: objects with ultrathin oxide are more easily damaged by external stresses, but more rapidly recover to the initial state at room temperature.

36 MATERIALS SCIENCE↗

Tests for the determination of the stress condition in tension fields

The present experiments treat the stress of actual tension fields within the elastic range. They give the magnitude of the flexural stresses due to wrinkling. They also disclose, particularly by slightly exceeded buckling load, the marked unloading - as compared with the tension-field theory - of the uprights as a result of the flexural stiffness of the web plate. The test sheets were clamped at the edges and brought to buckling through shearing and compressive stresses applied in the direction of the long sides.

Lahde, R↗

Improved assumed-stress hybrid shell element with drilling degrees of freedom for linear stress, buckling, and free vibration analyses

An improved four-node quadrilateral assumed-stress hybrid shell element with drilling degrees of freedom is presented. The formulation is based on Hellinger-Reissner variational principle and the shape functions are formulated directly for the four-node element. The element has 12 membrane degrees of freedom and 12 bending degrees of freedom. It has nine independent stress parameters to describe the membrane stress resultant field and 13 independent stress parameters to describe the moment and transverse shear stress resultant field. The formulation encompasses linear stress, linear buckling, and linear free vibration problems. The element is validated with standard tests cases and is shown to be robust. Numerical results are presented for linear stress, buckling, and free vibration analyses.

Rengarajan, Govind↗

High frequency characteristics of FeCoAlO thin films combined the effects of stress and magnetic field

The soft magnetic FeCoAlO thin films with different response at high frequency were prepared by using RF magnetron sputtering. Two different configurations of the sputtering targets were used: the Al{sub 2}O{sub 3} chips were placed on Fe{sub 70}Co{sub 30} disk either uniformly dispersed on the sputtering area (Target-A) or dispersed on the half side of the sputtering area (Target-B). It was found that, although, the films deposited from both of Target A and B possessed good soft magnetic properties and in-plane uniaxial magnetic anisotropy, they showed different behaviors at high frequency. The films deposited by using Target-A have mean permeability of 500 and a cut-off frequency (f{sub r}) of around 780 MHz, while the films deposited by using Target-B have mean permeability of 200 and a f{sub r} of 3.4 GHz. The higher f{sub r} of the later corresponds to the higher uniaxial anisotropic field in the films deposited by using the Target-B, which due to an extra anisotropy induced by the stress resulted from gradient of the Al-O composition. By adjusting the configuration of Target-B, the permeability and f{sub r} can be tuned to satisfy the different requirements for certain industrial applications.

36 MATERIALS SCIENCE↗

Stress-hybrid virtual element method on six-noded triangular meshes for compressible and nearly-incompressible linear elasticity

In this paper, we present a first-order Stress-Hybrid Virtual Element Method (SH-VEM) on six-noded triangular meshes for linear plane elasticity. Here, we adopt the Hellinger–Reissner variational principle to construct a weak equilibrium condition and a stress based projection operator. In each element, the stress projection operator is expressed in terms of the nodal displacements, which leads to a displacement based formulation. This stress-hybrid approach assumes a globally continuous displacement field while the stress field is discontinuous across each element. The stress field is initially represented by divergence-free tensor polynomials based on Airy stress functions, but we also present a formulation that uses a penalty term to enforce the element equilibrium conditions, referred to as the Penalty Stress-Hybrid Virtual Element Method (PSH-VEM). Numerical results are presented for PSH-VEM and SH-VEM, and we compare their convergence to the composite triangle FEM and B-bar VEM on benchmark problems in linear elasticity. The SH-VEM converges optimally in the L 2 norm of the displacement, energy seminorm, and the L 2 norm of hydrostatic stress. Furthermore, the results reveal that PSH-VEM converges in most cases at a faster rate than the expected optimal rate, but it requires the selection of a suitably chosen penalty parameter.

42 ENGINEERING↗

An Overview of CMIP5 and CMIP6 Simulated Cloud Ice, Radiation Fields, Surface Wind Stress, Sea Surface Temperatures and Precipitation over Tropical and Subtropical Oceans

The potential links between ice water path (IWP), radiation, circulation, sea surface temperature (SST) and precipitation over the Pacific and Atlantic Oceans resulting from the falling ice radiative effects (FIREs) are examined from present day model outputs of CMIP5 and CMIP6. The latter is divided into two subsets with (SON6) and without FIREs (NOS6) as more models with FIREs are included in CMIP6 than in CMIP5. Improvement in floating cloud ice (~20 g m-2) is noticeable over convective regions in CMIP6 relative to CMIP5. The inclusion of FIREs in SON6 subset may contribute to reduce biases of overestimated outgoing longwave radiation and downward surface shortwave and overestimated reflected shortwave at the top of the atmosphere (TOA) by magnitudes of 4?8 W m-2 over convective regions against CERES, compared to NOS6 subset. The reduced biases in radiative fluxes in convective regions stabilize the atmosphere and lead to circulation, SST, cloud and precipitation changes over the trade-wind regions, as seen from improved radiative fluxes (4?15 W m-2), surface wind stress biases, SST (0.2?0.8 K) and precipitation (1 mm day-1) biases. The significant improvement from NOS6 to SON6 leads to improved multi-model means for CMIP6 relative to CMIP5 for radiation fields over the trade wind regions but the degradation over convective zones is attributed to NOS6 subset. The results suggest that other sources of uncertainty and deficiencies in climate models may play significant roles for reducing discrepancies although FIREs, via radiation-circulation coupling, may be one of the factors that help to reduce regional biases.

Jui-Lin F Li↗

Effect of OFF-state stress induced electric field on trapping in AlGaN/GaN high electron mobility transistors on Si (111)

The influence of electric field (EF) on the dynamic ON-resistance (dyn-R{sub DS[ON]}) and threshold-voltage shift (ΔV{sub th}) of AlGaN/GaN high electron mobility transistors on Si has been investigated using pulsed current-voltage (I{sub DS}-V{sub DS}) and drain current (I{sub D}) transients. Different EF was realized with devices of different gate-drain spacing (L{sub gd}) under the same OFF-state stress. Under high-EF (L{sub gd} = 2 μm), the devices exhibited higher dyn-R{sub DS[ON]} degradation but a small ΔV{sub th} (∼120 mV). However, at low-EF (L{sub gd} = 5 μm), smaller dyn-R{sub DS[ON]} degradation but a larger ΔV{sub th} (∼380 mV) was observed. Our analysis shows that under OFF-state stress, the gate electrons are injected and trapped in the AlGaN barrier by tunnelling-assisted Poole-Frenkel conduction mechanism. Under high-EF, trapping spreads towards the gate-drain access region of the AlGaN barrier causing dyn-R{sub DS[ON]} degradation, whereas under low-EF, trapping is mostly confined under the gate causing ΔV{sub th}. A trap with activation energy 0.33 eV was identified in the AlGaN barrier by I{sub D}-transient measurements. The influence of EF on trapping was also verified by Silvaco TCAD simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of combined external stress and electric field on electric properties of 0.5% Fe-doped lead zirconate titanate ceramics

Influence of uniaxial pressure (0-1000 bars) applied parallel to or perpendicularly to the ac or dc electric field (in one-dimensional or two-dimensional manner) on dielectric and ferroelectric properties of hard lead zirconate titanate (PZT) ceramics were investigated. The experimental results revealed that applying uniaxial pressure leads to a reduction in the peak intensity of the electric permittivity (epsilon), of the frequency dispersion as well as of the dielectric hysteresis. Moreover, with increasing pressure the peak intensity of epsilon becomes diffused and shifts to a higher temperature. It was also found that simultaneous application of uniaxial pressure and electric field (perpendicular to each other) in the poling process improves the ferroelectric properties. This indeed indicates new possibility for poling materials with a high coercive field and/or high electric conductivity. The effects of uniaxial load are weaker than that obtained for soft PZT ceramics. It was concluded that applying uniaxial pressure induces similar effects as increasing the Ti ion concentration in PZT system. The obtained results were interpreted through Cochran soft mode and domain switching processes under applying of pressure.

36 MATERIALS SCIENCE↗

Effects of transverse temperature field nonuniformity on stress in silicon sheet growth

Stress and strain rate distributions are calculated using finite element analysis for steady-state growth of thin silicon sheet temperature nonuniformities imposed in the transverse (sheet width) dimension. Significant reductions in residual stress are predicted to occur for the case where the sheet edge is cooled relative to its center provided plastic deformation with high creep rates is present.

Mataga, P. A.↗

Low-field magnetoacoustic residual stress measurement in steel

Much of the recent development of the magnetoacoustic technique has been devoted to refine this technique as a reliable and practical tool for measuring bulk residual stress in steel components. For this, the effects of structural and metallurgical properties on the magnetoacoustic interaction have been studied for various types of steel samples. Also, progress is being made to obtain quantitative residual stress measurements in railroad wheels. This paper reviews the physical basis and the experimental results of the magnetoacoustic stress measurements in steels.

Namkung, M.↗

Shear testing of fiber reinforced metal matrix composites

This paper outlines the elements of a combined experimental/analytical methodology for accurate shear characterization of unidirectional composites in the linear and nonlinear range, with particular attention devoted to metal matrix composites. It is illustrated that consistent results can be obtained for a large class of composites from two commonly employed shear test methods currently in use by composites researchers when the influence of various factors that affect the determination of the actual shear response is properly analyzed. These factors include the effects of material anisotropy, specimen geometry, manner of load introduction, and test fixture design on the stress and deformation fields in the test section of off-axis and Iosipescu specimens. Common errors associated with the measurement of deformation fields and calculation of stress fields are discussed and quantified. Particular problems in the determination of the shear response of unidirectional boron/aluminum using the Iosipescu test are illustrated and discussed.

Pindera, Marek-Jerzy↗

Experimental study of the flow field inside a whirling annular seal

The flow field inside a whirling annular seal was measured using a 3-D Laser Doppler Anemometer (LDA) system. The seal investigated has a clearance of 1.27 mm, a length of 37.3 mm, and is mounted on a drive shaft with a 50 percent eccentricity ratio. This results in the rotor whirling at the same speed as the shaft rotation (whirl ratio = 1.0). The seal is operated at Reynolds number of 12,000 and a Taylor number of 6,300 (3,600 rpm). The 3-D LDA system is equipped with a rotary encoding system which is used to produce phase averaged measurements of the entire mean velocity vector field and Reynolds stress tensor field from 0.13 mm upstream to 0.13 mm downstream of the seal. The mean velocity field reveals a highly three dimensional flow field with large radial velocities near the inlet of the seal as well as a recirculation zone on the rotor surface. The location of maximum mean axial velocity migrates from the pressure side of the rotor at the inlet to the suction side at turbulence kinetic energy. However, turbulence production and dissipation attain equilibrium fairly quickly with remaining relatively constant over the last half of the seal.

Morrison, Gerald L.↗

Experimental study of the flow field inside a whirling annular seal

The flow field inside a whirling annular seal has been measured using a 3-D Laser Doppler Anemometer (LDA) system. The seal investigated has a clearance of 1.27 mm, a length of 37.3 mm and is mounted on a drive shaft with a 50 percent eccentricity ratio. This results in the rotor whirling at the same speed as the shaft rotation (whirl ratio = 1.0). The seal is operated at a Reynolds number of 12000 and a Taylor number of 6300 (3600 rpm). The 3-D LDA system is equipped with a rotary encoding system which is used to produce phase averaged measurements of the entire mean velocity vector field and Reynolds stress tensor field from 0.13 mm upstream to 0.13 mm downstream of the seal. The mean velocity field reveals a highly three-dimensional flow field with large radial velocities near the inlet of the seal as well as a recirculation zone on the rotor surface. The location of maximum mean axial velocity migrates from the pressure side of the rotor at the inlet to the suction side at the exit. Turbulence production is a maximum near the seal inlet as indicated by the rapid increase of the turbulence kinetic energy (kappa). However, turbulence production and dissipation attain equilibrium fairly quickly with kappa remaining relatively constant over the last half of the seal.

Morrison, Gerald L.↗

In-situ neutron scattering studies of magnetic shape memory alloys under stress, temperature, and magnetic fields

We have utilized the SMARTS engineering neutron diffractometer to study the crystallographic orientation and phase transformations in the ferromagnetic shape memory alloy Ni 2MnGa under conditions of temperature (200-600K), stress (500MPa), and magnetic field (2T). Neutrons are uniquely suited to probe the crystallographic response of materials to external stimuli because of their high penetration, which allows them to sample the bulk of the material (as opposed to the surface) as well as pass through environmental chambers. A single crystal of Ni{sub 5}MnGa was repeatedly thermally cycled through the Austenitic-Martensitic phase transformation under varying conditions of applied stress, magnetic field or both. In-situ neutron diffraction was used to quantitatively monitor the population of the crystallographic variants in the martensitic phase as a function of the external stimuli during cooling. Neutron diffraction was used to monitor variant selection in the Ferromagnetic Shape Memory Alloy Ni{sub 2}Mn Ga during austenitic to martensitic transformation under varying conditions of externally applied stress and magnetic field. Qualitatively, the results were to be expected in this simple example. The shorter and magnetically soft c-axis of the tetragonal martensitic phase aligned with the compressive stress or magnetic field. However, neutron diffraction proved useful in directly quantifying the selection of the preferred variant by external influence. For instance, by quantifying the variant selection, the neutron diffraction results made apparent that the sample 'remembered' a loading cycle following a 'reset' cycle with no external applied stress. Moreover, the power of in-situ neutron diffraction will become more apparent when applied to more complex, less understood, samples such as polycrystalline samples or composite samples.

36 MATERIALS SCIENCE↗