SEARCH · Engineering Papers

Results for “space phase model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Quantitative kinetic rules for plastic strain-induced α - ω phase transformation in Zr under high pressure

Plastic strain-induced phase transformations (PTs) and chemical reactions under high pressure are broadly spread in modern technologies, friction and wear, geophysics, and astrogeology. However, because of very heterogeneous fields of plastic strain $E$ p and stress σ tensors and volume fraction c of phases in a sample compressed in a diamond anvil cell (DAC) and impossibility of measurements of σ and $E$ p , there are no strict kinetic equations for them. Here, we develop a kinetic model, finite element method (FEM) approach, and combined FEM-experimental approaches to determine all fields in strongly plastically predeformed Zr compressed in DAC, and specific kinetic equation for α-ω PT consistent with experimental data for the entire sample. Since all fields in the sample are very heterogeneous, data are obtained for numerous complex 7D paths in the space of 3 components of the plastic strain tensor and 4 components of the stress tensor. Kinetic equation depends on accumulated plastic strain (instead of time) and pressure and is independent of plastic strain and deviatoric stress tensors, i.e., it can be applied for various above processes. Our results initiate kinetic studies of strain-induced PTs and provide efforts toward more comprehensive understanding of material behavior in extreme conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2026

AT2025ulz and S250818k: Zooming in with the Hubble Space Telescope

AT2025ulz is an optical/near-infrared transient discovered during follow-up of the candidate gravitational wave (GW) event S250818k. Its young age (≲1 day), rapid decline, and strong color evolution over the first 48 hr classify it as a potential kilonova candidate. In this work, we present the results of our observing campaign, carried out with the Gran Telescopio Canarias and the Hubble Space Telescope (HST). Although the early time evolution of AT2025ulz resembles some aspects of a kilonova, its rapid onset (∼3 hr after the GW trigger) and luminosity (a factor of ∼5 brighter than AT2017gfo in g band) are difficult to reproduce. Only a small subset of our kilonova models matches its multicolor light curve, and the inferred ejecta mass is uncomfortably large given the low chirp mass (≲0.87 M ⊙ ) of the GW candidate. HST observations place the transient within a nearby (z = 0.08489) spiral galaxy with ongoing star formation and measure a color (F336W − F160W ≈ 1.4 mag) that is too blue to match with a kilonova. Our data support the classification of AT2025ulz as a supernova, initially undergoing a shock-cooling phase and later entering its photospheric phase and spectroscopically identified via its broad absorption features.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Applicability of semiclassical methods for modeling laser-enhanced fusion rates in a realistic setting

In the context of the potential laser-induced enhancement to the rates of DHe 3 and DT fusion, we discuss the frequently-used Wentzel-Kramers-Brillouin (WKB) method and the imaginary-time method (ITM). For static external electric fields, we find that these methods predict significant enhancement to the fusion cross section for electric-field strengths > 10 14 V/m, especially at low values (≈ keV) for the enter-of-mass (CoM) energy. When considering dynamic electric fields, this enhancement can be amplified by considering increased photon frequencies. However, we also pro- vide a review of the region of laser-parameter phase space where these semiclassical methods are applicable. Here, we conclude that this allowable region decreases for higher photon frequencies in con-junction with lower values for the electric-field strength, motivating the need for future experiments to test the predictions of these methods and their ranges of validity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Ensuring thermodynamic consistency with invertible coarse-graining

Coarse-grained models are a core computational tool in theoretical chemistry and biophysics. A judicious choice of a coarse-grained model can yield physical insights by isolating the essential degrees of freedom that dictate the thermodynamic properties of a complex, condensed-phase system. The reduced complexity of the model typically leads to lower computational costs and more efficient sampling compared with atomistic models. Designing “good” coarse-grained models is an art. Generally, the mapping from fine-grained configurations to coarse-grained configurations itself is not optimized in any way; instead, the energy function associated with the mapped configurations is. In this work, we explore the consequences of optimizing the coarse-grained representation alongside its potential energy function. We use a graph machine learning framework to embed atomic configurations into a low-dimensional space to produce efficient representations of the original molecular system. Because the representation we obtain is no longer directly interpretable as a real-space representation of the atomic coordinates, we also introduce an inversion process and an associated thermodynamic consistency relation that allows us to rigorously sample fine-grained configurations conditioned on the coarse-grained sampling. We illustrate that this technique is robust, recovering the first two moments of the distribution of several observables in proteins such as chignolin and alanine dipeptide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Primordial black holes from first-order phase transition in the singlet-extended SM

Supercooled first-order phase transition (FOPT) can lead to the formation of primordial black holes (PBHs). This scenario imposes stringent requirements on the profile of the effective potential. In this work, we use the singlet extended Standard Model (xSM) as a benchmark model to investigate this possibility at the electroweak scale. The PBHs formed during a supercooled FOPT have a narrow mass distribution around the mass of Earth. This distribution is closely tied to the temperature at which the PBHs form, corresponding to the FOPT at the electroweak scale. This scenario can be probed with microlensing experiments, space-based gravitational wave detectors, and collider experiments. Remarkably, the future space-based gravitational wave detector LISA will hold the potential to either confirm this scenario that leads to PBH formation across the observable Universe in the xSM or completely rule it out. Interestingly, our findings suggest that PBHs within the xSM framework may align with observations of the six ultrashort timescale events reported by the OGLE microlensing experiment. Published by the American Physical Society 2025

Gonçalves, Dorival (ORCID:0000000342234238)↗

DOE OSTI2023

Gapped lineon and fracton models on graphs

We introduce a $\mathbb{Z}_N$ stabilizer code that can be defined on any spatial lattice of the form $\Gamma\times C_{L_z}$, where $\Gamma$ is a general graph. We also present the low-energy limit of this stabilizer code as a Euclidean lattice action, which we refer to as the anisotropic $\mathbb{Z}_N$ Laplacian model. It is gapped, robust (i.e., stable under small deformations), and has lineons. Its ground state degeneracy (GSD) is expressed in terms of a "mod $N$-reduction" of the Jacobian group of the graph $\Gamma$. In the special case when space is an $L\times L\times L_z$ cubic lattice, the logarithm of the GSD depends on $L$ in an erratic way and grows no faster than $O(L)$. Furthermore, we also discuss another gapped model, the $\mathbb{Z}_N$ Laplacian model, which can be defined on any graph. It has fractons and a similarly strange GSD.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Dynamics of Downdrafts Around a Growing Convective Cloud: A Numerical Study

We examine the dynamics of cloud-edge downdrafts over the growth phase of isolated cumuli, combining Eulerian and Lagrangian analyses. As in previous studies, our results show that growing cumuli are surrounded by downdrafts linked to cloud-scale quasi-toroidal circulations at all times at middle and upper cloud levels consistent with the thermal chain description of convective clouds. These toroidal circulations are responsible for the most intense cloud-edge downdrafts in our simulations. In the upper cloud half, roughly 30%–50% of the upward mass flux is typically compensated within a radius of about twice the updraft radius in quasi-laminar simulations forced by a warm bubble in an initially quiescent flow. In a turbulent cloud forced by surface fluxes, this compensation fraction is around 10%–30% over the same region. In contrast to the buoyancy-centered view of subsiding shells, Eulerian and Lagrangian vertical momentum budget analyses show that the most intense cloud-edge downdrafts in the turbulent setup, and after spin-up of the toroidal circulation in the quasi-laminar experiments, are predominantly mechanically forced (i.e., driven by dynamic pressure accelerations). This is consistent throughout the entire growth phase of the cumulus clouds and across tests with varying assumptions, including drier and moister environments. Despite dynamic pressure perturbations being the main driver of toroidal downdrafts, the downdraft speed (relative to the corresponding updraft velocity) exceeds the prediction of the non-buoyant Hill's spherical vortex—a simple model frequently used for cloud-scale circulations—by more than 30%.

Pardo, Lianet Hernández [Goethe Univ., Frankfurt (↗

DOE OSTI2021

Phonon Magnetic Moment from Electronic Topological Magnetization

The traditional theory of magnetic moments for chiral phonons is based on the picture of the circular motion of the Born effective charge, typically yielding a small fractional value of the nuclear magneton. Here we investigate the adiabatic evolution of electronic states induced by the lattice vibration of a chiral phonon and obtain an electronic orbital magnetization in the form of a topological second Chern form. We find that the traditional theory needs to be refined by introducing a k resolved Born effective charge, and identify another contribution from the phonon-modified electronic energy together with the momentum-space Berry curvature. The second Chern form can diverge when there is a Yang’s monopole near the parameter space of interest as illustrated by considering a phonon at the Brillouin zone corner in a gapped graphene model. We also find large magnetic moments for the optical phonon in bulk topological materials where nontopological contribution is also important. Our results agree with recent observations in experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Determining Catalytically Relevant Surfaces through Coverage-Dependent Lattice Gas Models: Carbon Adsorption on Fe(100)

Here, we have quantified the C–C lateral interactions on Fe(100) using a density functional theory (DFT)-parameterized lattice gas cluster expansion (LG CE) model trained using 265 unique configurations spanning a C coverage from 0 to 1 monolayer (ML). Our LG CE model shows high predictive accuracy with a leave-multiple-out cross-validation score of 10.2 and 16.6 meV/site for systems with and without the top two layers of Fe atoms fixed, respectively. Electronic ground-state structures identified from the lattice gas model (including the structures at 0 and 1 monolayers) were further used to generate ab initio phase diagrams under a range of temperatures and pressures. At low temperatures (<400 K), we found that the 1.0 monolayer structure is dominant, whereas at higher temperatures (>500 K), the 0.88 ML structure is most likely to form on the Fe surface. Interestingly, our model identified a c (2 × 2) ordered structure at 1/2 ML, which correlates well with previous DFT studies for carbon adsorption on iron surfaces and matches with the experimentally observed low-energy electron diffraction structure. Overall, the DFT-parameterized energies for the C/Fe system including effects of coverage and configurational space can further help in developing multiscale models for various heterogeneous reactions involving C–C and C–Fe interactions.

08 HYDROGEN↗

DOE OSTI2025

Corrosion Testing of Refractory inContact with Molten Glasses Designed for Waste Vitrification - VSL Touchpoint Matrix Glasses

It is known that the predictive life of the refractory ceramic liner of nuclear waste glass melters is conservative, as demonstrated by performance of these materials such as in the Defense Waste Processing Facility (DWPF). The motivation for this task is to maximize the useful life of the melters that will be operated at the Waste Treatment and Immobilization Plant (WTP), which will in turn minimize procurement and disposal costs and melter outage times, as well as to identify maximum loadings in the waste glass of those species that corrode melter components. This task was initiated jointly with Pacific Northwest National Laboratory (PNNL) with the objective to develop a methodology and model to enable more accurate prediction of refractory service life under prototypic conditions from laboratory-scale material corrosion tests. Refractory corrosion is generally reported as physical material loss, measured in units of distance (e.g., inch) or as physical material loss rate, measured in units of distance per time (e.g., inch/day). In post-operational melters, the refractory corrosion is measured directly, sometimes reported as corrosion depth. Crucible tests are used in the laboratory to accelerate the refractory corrosion to facilitate a meaningful measurement in a commensurate amount of time. Crucible tests are particularly useful in understanding refractory corrosion across a large glass composition space, where operational testing would be prohibitive. Some of the critical parameters that are known to influence refractory corrosion by molten glass in a crucible test are temperature, system redox, molten salt phases, glass chemistry, and test duration. The majority of data collected for Monofrax® K-3 (hereafter referred to as K-3) corrosion is from crucible tests, but a small amount comes directly from scaled and production melters. Crucible test data has been collected under varying conditions, whereas data collected from operational melters is relatively fewer and represents conditions specific to the melter campaign. The result is that the published data can be grouped and analyzed in multiple ways, not all of which are readily comparable. The Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass (ASTM C621) outlines the general guidelines used across industry. That method describes a sealed, static test in which the surface area of the refractory coupon and the volume of glass are fixed. A significant portion of the crucible data pertaining to nuclear waste glasses has been collected in a modified configuration; the most notable differences being the surface area of the refractory coupon to volume of the glass and use of a method for bubbling the melt. To our knowledge, the influence of those parameters on the refractory corrosion has not been quantified. In this work, it was determined that static tests and bubbled tests would be performed. Savannah River National Laboratory (SRNL) was tasked with setting up and performing static testing while PNNL was tasked with setting up and performing bubbled testing. Initial activities were performed to establish laboratory methods that reproduce data comparable to existing data sets of K-3 refractory corrosion by low activity waste (LAW) and high-level waste (HLW) glass compositions. Later activities were focused on refining the test parameters to establish a standard test practice to be used between Laboratories and collecting additional data to be used in the enhanced waste glass model development. This document serves primarily to convey the refractory loss measurement results from corrosion testing of K-3 refractory with waste glass compositions developed for use in the WTP melters. The data will be used in the enhanced property/composition models being developed for waste glass vitrification and melter operations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2024

A light QCD axion with hilltop misalignment

We study the cosmological evolution of a light QCD axion and identify the parameter space to obtain the correct relic dark matter abundance. The axion potential is flattened at the origin, corresponding to the only minimum, while it is unsuppressed at π. These potential features arise by assuming a mirror sector with the strong CP phase $\overline{θ}$ shifted by π compared to the SM sector, which allows the mirror axion potential to be tuned against the usual QCD axion potential. Before the QCD phase transition, assuming the mirror sector is decoupled and much colder than the SM thermal bath, the mirror sector potential dominates, causing the axion to initially roll to a temporary minimum at π. However, after the QCD phase transition, the potential minimum changes, and the axion relaxes from the newly created “hilltop” near π to the CP-conserving minimum at the origin. As the axion adiabatically tracks this shift in the potential minimum through the QCD phase transition, with non-adiabatic evolution near π and 0, it alters the usual prediction of the dark matter abundance. Consequently, this “hilltop” misalignment mechanism opens new regions of axion parameter space, with the correct relic abundance while still solving the strong CP problem, that could be explored in future experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

Dynamic Heterogeneity and Kovacs’ Memory Effects in Supercooled Water

Understanding the properties of supercooled water is important for developing a comprehensive theory for liquid water and amorphous ices. Because of rapid crystallization for deeply supercooled water, experiments on it are typically carried out under conditions in which the temperature and/or pressure are rapidly changing. As a result, information on the structural relaxation kinetics of supercooled water as it approaches (metastable) equilibrium is useful for interpreting results obtained in this experimentally challenging region of phase space. Here, we used infrared spectroscopy and the fast time resolution obtained by transiently heating nanoscale water films to investigate relaxation kinetics (aging) in supercooled water. When the structural relaxation of the water films was followed using a temperature jump protocol analogous to the classic experiments of Kovacs, similar memory effects were observed. In particular, after suitable aging at one temperature, water’s structure displayed an extremum versus the number of heat pulses upon changing to a second temperature before eventually relaxing to a steady-state structure characteristic of that temperature. A random double well model based on the idea of dynamic heterogeneity in supercooled water accounts for the observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Fierro Version 2.x

FIERRO is a parallel C++ code designed to simulate fluid mechanics, heat transfer, and solid mechanics in two- and three-dimensional space. FIERRO is written to run on homogeneous (CPU) and heterogeneous (CPU+GPU) high performance computing machines. Fierro can aid a) modeling and design efforts that have historically relied on commercial implicit and explicit finite element codes, b) numerical methods research, c) manufacturing research, and d) computer science research. The code contains diverse numerical methods to solve the governing physics equations for both quasi-static and dynamic problems. Mathematical optimization solvers are coupled to the numerical methods to research topology and shape optimization that has application to additive manufacturing, and to create novel numerical approaches. Phase-field methods with micromechanical solvers are provided to simulate microstructure formation and evolution in manufacturing processes. The micromechanical solvers can also help research efforts create continuum-scale constitutive models for solids, as a function of the microstructure, in situ in a calculation or in a stand-alone manner. No physical data exists within the code.

Morgan, Nathaniel↗

DOE OSTI2023

Fierro

FIERRO is a parallel C++ code designed to simulate fluid mechanics, heat transfer, and solid mechanics in two- and three dimensional space. FIERRO is written to run on homogeneous (CPU) and heterogeneous (CPU+GPU) high performance computing machines. Fierro can aid a) modeling and design efforts that have historically relied on commercial implicit and explicit finite element codes, b) numerical methods research, c) manufacturing research, and d) computer science research. The code contains diverse numerical methods to solve the governing physics equations for both quasi-static and dynamic problems. Mathematical optimization solvers are coupled to the numerical methods to research topology and shape optimization that has application to additive manufacturing, and to create novel numerical approaches. Phase-field methods with micromechanical solvers are provided to simulate microstructure formation and evolution in manufacturing processes. The micromechanical solvers can also help research efforts create continuum-scale constitutive models for solids, as a function of the microstructure, in situ in a calculation or in a stand-alone manner. No physical data exists within the code.

Morgan, Nathaniel↗

DOE OSTI2026

AI-driven neutrino diagnostics and radiation-hard beam instrumentation for next-generation neutrino experiments

The Long Baseline Neutrino Facility (LBNF) at Fermilab will deliver a high-intensity, multi-megawatt neutrino beam to the Deep Underground Neutrino Experiment (DUNE), enabling precision tests of the three-neutrino paradigm, CP violation searches, neutrino mass ordering determination, and supernova neutrino studies. To accelerate DUNE’s physics reach and ensure robust beam operations, we propose an integrated AI-driven framework with real-time diagnostics and radiation-hardened instrumentation. At its core is a Real-Time Beam Integrity Monitor using a physics-informed Digital Twin. By reconstructing pion phase space from muon profiles and exploiting magnetic horn optic linearity, it enables spill-by-spill beam correction and flux stabilization. By using this approach, flux-related systematics could be reduced from 5% to 1%, potentially accelerating the discovery of CP violations by four to six years. Complementing this, a US–Japan R&D effort will deploy a LAPPD-based muon monitor in the NuMI beamline. ToF measurements can be acquired with picosecond precision using this radiation-hard system, enhancing sensitivity to horn chromatic effects. Simulations confirm strong response to these effects. ML models predict beam quality and horn current to sub-percent accuracy from muon data, enhancing anomaly detection and stability. This scalable, AI-enabled strategy improves beam fidelity, reduces systematics, and sets a new standard for high-power accelerator operations.

Ganguly, Sudeshna [Fermilab] (ORCID:00000003163482↗

DOE OSTI2025

AI-driven neutrino diagnostics and radiation-hard beam instrumentation for next-generation neutrino experiments

Ganguly, Sudeshna [Fermilab] (ORCID:00000003163482↗

DOE OSTI2025

VUV Photoionization Dynamics and Reactivity of Heterogeneous Water Clusters

This feature focuses on bridging isolated water and bulk water studies. It assembles experiments and theory on water clusters, mainly probed by vacuum ultraviolet (VUV) radiation, and summarizes what the effects are of intermolecular interactions on both the spectroscopy and the VUV-induced processes in water. In particular, it highlights studies of heterogeneous water clusters─those incorporating other molecular species such as naphthalene, methane, formic acid, and glycerol─which serve as model systems to investigate the fundamental roles of water in hydrogen bonding networks, proton transfer, and astrochemical processes. These mixed clusters provide a platform to revisit the stability of protonated water clusters and compile observations of ionization-induced structural rearrangements and fragmentation, especially in systems involving hydroxyl-rich cosolvents. This feature then explores energy transfer mechanisms in molecular clusters, following VUV photoexcitation. It concludes with potential future directions. First, we investigate excited-state dynamics in molecular clusters through direct probing, complementing the synchrotron studies discussed here. Second, exploring gas-phase molecule evaporation from confined spaces and interfaces using advanced spectroscopic techniques sheds light on these ubiquitous, yet currently debated, molecular processes.

Cluster chemistry↗

DOE OSTI2022

Controlling inversion disorder in a stoichiometric spinel magnet

In the study of frustrated quantum magnets, it is essential to be able to control the nature and degree of site disorder during the growth process, as many measurement techniques are incapable of distinguishing between site disorder and frustration-induced spin disorder. Pyrochlore-structured spinel oxides can serve as model systems of geometrically frustrated three-dimensional quantum magnets; however, the nature of the magnetism in one well-studied spinel, ZnFe 2 O 4 , remains unclear. Here, we demonstrate simultaneous control of both stoichiometry and inversion disorder in the growth of ZnFe 2 O 4 single crystals, directly yielding a revised understanding of both the collective spin behavior and lattice symmetry. Crystals grown in the stoichiometric limit with minimal site inversion disorder contravene all the previously suggested exotic spin phases in ZnFe 2 O 4 . Furthermore, the structure is confirmed on the F$\bar{4}$3m space group with broken inversion symmetry that induces antiferroelectricity. The effective tuning of magnetic behavior by site disorder in the presence of robust antiferroelectricity makes ZnFe 2 O 4 of special interest to multiferroic devices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗