Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “source location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Seismic velocity modeling and earthquake relocations for the southern Nevada National Security Site (NNSS), with a focus on Rock Valley

The Rock Valley Direct Comparison (RV/DC) is the third phase of the Source Physics Experiment (SPE; Snelson et al., 2014), a project aimed at improving seismic discrimination between explosive sources and natural earthquakes. Phases I and II of SPE focused on studying the generation of shear waves in endmember geologies (granite and alluvium, respectively), while Phase III aims to detonate a chemical explosion co-located with the source region of the 1993 Rock Valley earthquake sequence, located in the Rock Valley Fault Zone (RVFZ), in the southern portion of the Nevada Test Site (now the Nevada National Security Site, or NNSS).

58 GEOSCIENCES↗
DOE OSTI2020

pLiner

Compiler optimizations can alter significantly the numerical results of scientific computing applications. When numerical results differ significantly between compilers, optimization levels, and floating-point hardware, these numerical inconsistencies can impact programming productivity. pLiner is a framework that helps programmers identify locations in the source code that are highly affected by compiler optimizations. pLiner uses a novel approach to identify such code locations by enhancing the floatingpoint precision of variables and expressions. Using a guided search to locate the most significant code regions, pLiner can report to users such locations at different granularities, file, function, and line of code.

Laguna Peralta, Ignacio↗
NASA NTRS1988

Geobotanical remote sensing for determination of aggregate source material

Aggregate source material suitable for facility and roadbed construction is often a very limited and highly valuable resource. The location of suitable source material is crucial to construction operations once facility requirements are established. The application of airborne and spaceborne remote sensing to terrain information requirements has proved attractive because of the rapid processing time and extensive spatial coverage associated with remotely gathered imagery. Source material identification may be improved by the remote sensing of vegetation associated with the material, particularly in areas of high vegetative cover. A research study employing remote sensing techniques was initiated to determine if vegetation could be used to discriminate parent materials for suitability as aggregate source material. Two test sites representing potential alluvial and residual source areas were selected in a semiarid region of Central California. Methods developed for the study included field observations of vegetation characteristics associated with the two parent material types along with the analysis of Thematic Mapper Simulator data flown over the test sites. The most useful images were those composites that included bands from two of the techniques (i.e., a Perpendicular Vegetation Index (PVI) band combined with principal components bands).

Minor, Timothy↗
NASA NTRS1992

Estimating high mosquito-producing rice fields using spectral and spatial data

The cultivation of irrigated rice provides ideal larval habitat for a number of anopheline vectors of malaria throughout the world. Anopheles freeborni, a potential vector of human malaria, is associated with the nearly 240,000 hectares of irrigated rice grown annually in Northern and Central California; therefore, this species can serve as a model for the study of rice field anopheline population dynamics. Analysis of field data revealed that rice fields with early season canopy development, that are located near bloodmeal sources (i.e., pastures with livestock) were more likely to produce anopheline larvae than fields with less developed canopies located further from pastures. Remote sensing reflectance measurements of early-season canopy development and geographic information system (GIS) measurements of distanes between rice fields and pastures with livestock were combined to distinguish between high and low mosquito-producing rice fields. Using spectral and distance measures in either a discriminant or Bayesian analysis, the identification of high mosquito-producing fields was made with 85 percent accuracy nearly two months before anopheline larval populations peaked. Since omission errors were also minimized by these approaches, they could provide a new basis for directing abatement techniques for the control of malaria vectors.

Wood, B. L.↗
NASA NTRS1983

Voyager observations of Saturnian ion and electron phase space densities

Voyager 1 and 2 low-energy charged particle (LECP) observations of 30-keV to 2-MeV electron and ion energy spectra and angular distributions have been used to calculate phase space densities at constant first and second adiabatic invariants in the Saturnian magnetosphere. The results are generally consistent with inward radial diffusion from an external source. The data obtained also indicate a source of ions located within the orbital distance of Enceladus capable of producing 10- to 40-MeV/Gauss ions as well as a source of electrons at about 3.5 Saturn radii which produces particles at 100 to 200 MeV/Gauss. Higher magnetic moment (200-400 MeV/Gauss) ions extend from the sunward boundary between a plasma mantle and the region of durable trapping at the Saturn radius; the behavior of the phase space density suggests inward diffusion of these particles from a source at the boundary. The identification of sources of low (10 to 200 MeV/Gauss) magnetic moment particles deep in the Saturnian magnetosphere is a new result of this work. Several analyses of the observed phase space densities in terms of time-independent radial diffusion are presented.

Armstrong, T. P.↗
NASA NTRS1989

A study of the stellar population in the Lynds 1641 dark cloud. I - The IRAS catalog sources

The character of the sources identified in the IRAS Point Source Catalog and located within the boundaries of the nearest giant molecular cloud, Lynds 1641 is discussed. New optical and near-infrared photometry are combined to provide spectral energy distributions (SEDs) for these objects divided into three classes: class I objects with flat or rising spectra, class II objects with spectra intermediate in slope between a flat and blackbody spectrum, and class III objects with spectra similar to those of blackbodies. It is found that L1641 contains a much larger percentage of class I sources than does the nearby Taurus-Auriga star-forming complex. Spectral energy distributions for the IRAS-selected sample are examined and compared with SEDs for young stellar objects (YSOs) located in Taurus-Auriga. The IRAS-selected sources having optical counterparts in the H-R diagram are identified and discussed along with the distribution of masses and ages for these YSOs.

Strom, Karen M.↗
DOE OSTI2020

Experimental Investigation of the Effects of Magnetic Mirrors on Plasma Transport in the Prototype Material Plasma Exposure Experiment

The Prototype Material Plasma Exposure eXperiment (Proto-MPEX) at Oak Ridge National Laboratory is developing a helicon radio frequency (RF) source for plasma production along with microwave electron heating and RF ion heating. Proto-MPEX has several magnetic mirrors that affect plasma transport. The magnetic field near the helicon source is ~ 0.05 T, and the peak magnetic field in Proto-MPEX is ~ 1.8 T, which results in a large magnetic well for particles sourced at the helicon transporting toward the target region. Keeping the helicon source field and the target field constant, experiments have been conducted by methodically changing the magnetic field, at a local axial location, within the source and the target. Plasma flow measurements using Mach probes have shown a decrease in the flow as a function of the magnetic mirror ratio. Plasma flows were further investigated with ion cyclotron resonant heating (ICH). Results with the addition of ICH measured upstream of the antenna have shown a decrease in Mach number as a function of mirror ratio when compared to helicon discharges. Such flow behavior demonstrated slowing down of the plasma due to the increased reverse plasma flow toward the helicon plasma source. However, in high magnetic fields, when the resonant magnetic field moved away from the ICH antenna, no effects on the plasma flow due to ICH were observed.

Kafle, Nischal↗
NASA NTRS1976

Report of the Joint Scientific Mission Definition Team for an infrared astronomical satellite

The joint effort is reported of scientists and engineers from the Netherlands, the United Kingdom, and the United States working as a team for the purpose of exploring the possibility of a cooperative venture. The proposed mission builds upon experience gained from the successful Astronomical Netherlands Satellite (ANS). This satellite will be in a polar orbit at an altitude of 900 km. It will carry an 0.6 m diameter telescope cooled with helium to a temperature near 10K. An array of approximately 100 detectors will be used to measure the infrared flux in four wavelength bands centered at 10, 20, 50, and 100 microns. Sources will be located on the sky with positional accuracy of 1/2 arcminute. The instrument should be able to investigate the structure of extended sources with angular scales up to 1.0 deg. The entire sky will be surveyed and the full lifetime of the mission of about one year will be necessary to complete the survey. Special observational programs will also be incorporated into the mission.

Source record↗
NASA NTRS1985

Measurements of distributed polarized radio sources from spinning spacecraft - Effect of a tilted axial antenna ISEE-3 application and results

An analysis is presented of the system response of a satellite receiver-antenna system to locate a radio source when the satellite is tilted on its axis. The satellite is spin stabilized but experiences a tilt due to either a mechanical misalignment or a shift in the electrical axis caused by parasitic currents in other spacecraft structures. The shorter the antenna, the more significant the effects. Numerical techniques are developed for obtaining the Stokes parameters and the angular parameters of a uniform conical source sensed by a linear antenna in order to derive the average power response of a synthesized dipole to a point on a distributed polarized source. Relative gains are calculated along the antenna at different angles to the source. The techniques are applied to sample ISEE-3 satellite data for Type III solar radio bursts which were sensed by an axial and an equatorial antenna. The two antennas permit localization of the source and quantification of the polarization and angular extent of the source. The resulting high precision in calculations of all three source parameters commends use of the model in analyses of data from the planned ULYSSES mission.

Fainberg, J.↗
NASA NTRS1975

Absolute plate motions by boundary velocity minimizations

The main interaction of the earth's interior with the lithosphere is as a material source and sink. An absolute reference frame defined by minimizing the translational motion of tectonic plate boundaries differs by 0.6 cm/year from a frame defined by hot spot traces and by 0.4 cm/year from the frame defined by the most plausible model of drag forces on the plates. The rms absolute translational velocities are about 2 cm/year for ocean-ocean plate boundaries and 1.5 cm/year for ocean-continent plate boundaries. The close agreement between the source and sink and the drag-dependent definitions suggests that the lithosphere, as a stress guide, to some extent controls the locations of its sources and sinks.

Kaula, W. M.↗
NASA NTRS1976

Directory of aerospace safety specialized information sources, volume 2

A handbook of organizations and experts in specific and well-defined areas of safety technology is presented. It is designed for the safety specialist as an aid for locating both information sources and individual points of contact (experts) in engineering related fields. The file covers sources of data in aerospace design, tests, and operations, as well as information on hazard and failure cause identification, accident analysis, and materials characteristics. Other related areas include the handling and transportation of hazardous chemicals, radioactive isotopes, and liquified natural gases.

Rubinstein, R. I.↗
NASA NTRS1985

Some evidence for high energy gamma-ray sources at large galactic latitudes

The arrival directions of the gamma-quanta with energies of about 10 to 15th power eV which were registrated by Tien Shan experiment were compared with COS-B observations. On the basis of the Monte Carlo simulations it was shown with low probability that arrival directions of Tien Shan gamma-quanta initiated showers are not uniformly distributed. It is shown that in the region not seen by COS-B mission, the high energy gamma-ray sources should be located at position of 90 deg. 1 sup 11 130 deg and b sup 11 or = 50 deg. The integral intensity of these sources should be I ( 10 to the 15th power eV) = 4.8 + or - 1.7).10 to the 13th power/sq cm/s/str. There is no coincidence between the gamma-quanta registrated by Tien Shan experiment with Geminga intense COS-B gamma source. So it is shown that the integral photon spectrum of Geminga (I(e) approx E sup-Beta, where Beta = 0.8 for E 1 GeV) becomes steeper (Beta 1.2) in high energy region with probability 99.9.%.

Karakula, S.↗
NASA NTRS1973

Mini-Brayton heat source assembly design study. Volume 2: Titan 3C mission

Major conclusions of the space shuttle heat source assembly study are reported that project a minimum weight design for a Titan 3 C synchronous orbit mission; requirements to recover the heat source in orbit are eliminated. This concept permits location of the heat source end enclosure supports and heat source assembly support housing in a low temperature region external to the insulation enclosure and considers titanium and beryllium alloys for these support elements. A high melting insulation blanket consisting of nickel foil coated with zirconia, or of gold foil separated with glass fiber layers, is selected to provide emergency cooling in the range 2000 to 2700 F to prevent the isotope heat source from reaching unsafe temperatures. A graphic view of the baseline heat source assembly is included.

Source record↗
NASA NTRS1979

Ionospheric and satellite remote sensing of tornadic storms

Gravity waves associated with tornadoes were studied by using a ground-based ionospheric sounding system and satellite visible and infrared photographs of clouds associated with storms. Examples were chosen from gravity waves associated with a group of tornadoes and with isolated tornadic storms. Ray tracing computation was carried out to identify the location of the wave source. It is found that the wave sources of gravity waves associated with tornadoes were located on the squall line and/or isolated clouds where the tornado touched down one hour after the gravity waves were excited.

Hung, R. J.↗
NASA NTRS1983

An experimental investigation of sound radiation from a duct with a circumferentially varying liner

The radiation of sound from an asymmetrically lined duct is experimentally studied for various hard-walled standing mode sources. Measurements were made of the directivity of the radiated field and amplitude reflection coefficients in the hard-walled source section. These measurements are compared with baseline hardwall and uniformly lined duct data. The dependence of these characteristics on mode number and angular location of the source is investigated. A comparison between previous theoretical calculations and the experimentally measured results is made and in general good agreement is obtained. For the several cases presented an asymmetry in the liner impedance distribution was found to produce related asymmetries in the radiated acoustic field.

Fuller, C. R.↗
NASA NTRS1991

Numerical simulations of high-speed solar wind streams within 1 AU and their signatures at 1 AU

A parametric study of the evolution within, and signatures at, 1 AU of high-speed streams is performed with the use of a MHD two-and-a-half-dimensional time-dependent model. This study is an extension of an earlier one by Smith and Dryer (1990) who examined the ecliptic plane consequences of relatively short-duration, energetic solar disturbances. The present study examines both the erupting and corotating parts of long-duration, high-speed streams characteristic of coronal hole flows. By examining the variation of the simulated plasma velocity, density, temperature, and magnetic field at 1 AU, as well as the location of the solar coronal hole sources relative to the observer at 1 AU, it was possible to provide some insight into the identification of the solar sources of interplanetary disturbances. Two definitions for angle locating the solar source of interplanetary disturbances at 1 AU are presented and discussed. The results are applied to the suggestion by Hewish (1988) that low-latitude coronal holes are suitably positioned to be the sources of major geomagnetic storms when the holes are in the eastern half of the solar hemisphere at the time of the commencement of the storm. The results indicate that, for these cases, the streams emanating from within the hole must be very fast, greater than 1000 km/s, or very wide, greater than 60 deg, at the inner boundary of 18 solar radii.

Smith, Z.↗
NASA NTRS1992

Sublimation rates of carbon monoxide and carbon dioxide from comets at large heliocentric distances

Using a simple model for outgassing from a small flat surface area, the sublimation rates of carbon monoxide and carbon dioxide, two species more volatile than water ice that are known to be present in comets, are calculated for a suddenly activated discrete source on the rotating nucleus. The instantaneous sublimation rate depends upon the comet's heliocentric distance and the Sun's zenith angle at the location of the source. The values are derived for the constants of CO and CO2 in an expression that yields the local rotation-averaged sublimation rate as a function of the comet's spin parameters and the source's cometocentric latitude.

Sekanina, Zdenek↗
NASA NTRS1993

Jet induced star formation in centrally dominant galaxies?

Using U-I CCD color maps of two centrally dominant cluster galaxies, we find unusual color structures which may be due to star formation which has been induced by their radio sources. These objects, located in the clusters A1795 and A2597, have blue central colors to radii of 20 kpc, spatially extended emission-line structures, and powerful radio sources. They reside at the centers of cooling flows with mass-accretion rates which are estimated to be approximately greater than 300 solar mass/yr. The regions of bluest local color are superposed on or along their radio-source structures. Our observations suggest that the radio sources associated with these objects may be inducing massive star formation in their central 20 kpc. The star formation may be the result of the radio plasma interacting with the warm emission-line gas and dense, x-ray emitting filaments similar to those recently discovered in two other clusters with the ROSAT Observatory. Since radio jets are likely to be transient, this may help to explain the scatter in the correlations between color and mass-accretion rate, although other factors may also contribute. Alternatively, scattered radiation from a hidden active nucleus or recent mergers may be responsible for the color structure. The color and radio properties of these objects are qualitatively similar but smaller in luminosity and spatial extent to those found in high redshift radio galaxies. Our observations of galaxies at z approximately = 0.06-0.1 show that processes similar to 'the alignment effect' found in high redshift radio galaxies occur at more recent epochs.

Mcnamara, Brian R.↗