Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Transport properties and lithium insertion study in the p-type semi-conductors AgCuO{sub 2} and AgCu{sub 0.5}Mn{sub 0.5}O{sub 2}

The transport properties and lithium insertion mechanism into the first mixed valence silver-copper oxide AgCuO{sub 2} and the B-site mixed magnetic delafossite AgCu{sub 0.5}Mn{sub 0.5}O{sub 2} were investigated by means of four probes DC measurements combined with thermopower measurements and in situ XRD investigations. AgCuO{sub 2} and AgCu{sub 0.5}Mn{sub 0.5}O{sub 2} display p-type conductivity with Seebeck coefficient of Q=+2.46 and +78.83 {mu}V/K and conductivity values of {sigma}=3.2x10{sup -1} and 1.8x10{sup -4} S/cm, respectively. The high conductivity together with the low Seebeck coefficient of AgCuO{sub 2} is explained as a result of the mixed valence state between Ag and Cu sites. The electrochemically assisted lithium insertion into AgCuO{sub 2} shows a solid solution domain between x=0 and 0.8Li{sup +} followed by a plateau nearby 1.7 V (vs. Li{sup +}/Li) entailing the reduction of silver to silver metal accordingly to a displacement reaction. During the solid solution, a rapid structure amorphization was observed. The delafossite AgCu{sub 0.5}Mn{sub 0.5}O{sub 2} also exhibits Li{sup +}/Ag{sup +} displacement reaction in a comparable potential range than AgCuO{sub 2}; however, with a prior narrow solid solution domain and a less rapid amorphization process. AgCuO{sub 2} and AgCu{sub 0.5}Mn{sub 0.5}O{sub 2} provide a discharge gravimetric capacity of 265 and 230 mA h/g above 1.5 V (vs. Li{sup +}/Li), respectively, with no evidence of a new defined phases. - Graphical abstract: Investigation on the transport properties of AgCuO{sub 2} and the new B-site mixed Delafossite AgCu{sub 0.5}Mn{sub 0.5}O{sub 2} shows a p-type conductivity of {sigma}=3.2x10{sup -1} and 1.8x10{sup -4} S/cm, respectively. The high conductivity, as a result from a high charge carrier density in AgCuO{sub 2} supports the existence of a mixed valence state between silver and copper. A particular emphasis is also placed on the electrochemical lithium insertion properties into these two materials by in situ XRD measurements to better insight on the Li{sup +} insertion mechanism and also scrutinize possible new compounds electrochemically accessible in the Li-Ag-Cu system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure, stability, and photoluminescence in the anti-perovskites Na{sub 3}W{sub 1−x}Mo{sub x}O{sub 4}F (0≤x≤1)

Single-phase ordered oxyfluorides Na{sub 3}WO{sub 4}F, Na{sub 3}MoO{sub 4}F and their mixed members Na{sub 3}W{sub 1−x}Mo{sub x}O{sub 4}F can be prepared via facile solid state reaction of Na{sub 2}MO{sub 4}·2H{sub 2}O (M=W, Mo) and NaF. Phases produced from incongruent melts are metastable, but lower temperatures allow for a facile one-step synthesis. In polycrystalline samples of Na{sub 3}W{sub 1−x}Mo{sub x}O{sub 4}F, the presence of Mo stabilizes the structure against decomposition to spinel phases. Photoluminescence studies show that upon excitation with λ=254 nm and λ=365 nm, Na{sub 3}WO{sub 4}F and Na{sub 3}MoO{sub 4}F exhibit broad emission maxima centered around 485 nm. These materials constitute new members of the family of self-activating ordered oxyfluoride phosphors with anti-perovskite structures which are amenable to doping with emitters such as Eu{sup 3+}. - Graphical abstract: Directed synthesis of the ordered oxyfluorides Na{sub 3}W{sub 1−x}Mo{sub x}O{sub 4}F (0≤x≤1) has shown that a complete solid solution is attainable and provides the first example of photoluminescence in these materials. - Highlights: • Na{sub 3}W{sub 1−x}Mo{sub x}O{sub 4}F is a complete solid solution with hexagonal anti-perovskite structure. • The presence of even small amounts of Mo stabilizes the structure against decomposition. • Na{sub 3}W{sub 1−x}Mo{sub x}O{sub 4}F has broad emissions centered ≈485 nm (λ{sub ex}=254 nm and λ{sub ex}=365 nm). • These materials constitute a new family of self-activated oxyfluoride phosphors. • Na{sub 3}W{sub 1−x}Mo{sub x}O{sub 4}F materials are amenable to doping with emitters such as Eu{sup 3+}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advanced thermal/environmental barrier coatings of high-entropy rare earth disilicates tuned by strong anharmonicity of Eu 2 Si 2 O 7

Advancing thermal/environmental barrier coating (TEBC) materials with integrated thermal-mechanical functions is paramount for safeguarding SiC-based ceramic matrix composites (CMCs) in high-efficiency gas turbines. Herein, we employ a synergistic approach, combining density functional theory (DFT) methods and combinatorial chemistry techniques, to design high-performance and low-cost RE 2 Si 2 O 7 (RE = rare earth elements) TEBC materials tailored for enhanced compatibility with SiC-based CMCs. Expanding on phase stability of alloying pure RE 2 Si 2 O 7 , the investigation extends to the mechanical and thermal properties of solid solution systems, including Er 1/2 Y 3/4 Yb 3/4 Si 2 O 7 , Gd 1/4 Er 1/4 Y 3/4 Yb 3/4 Si 2 O 7 , and Eu 1/4 Er 1/4 Y 3/4 Yb 3/4 Si 2 O 7 . The solid solution systems exhibit a major reduction in lattice thermal conductivity relative to their pure counterparts, achieving ultralow values of 0.25 to 0.39 W m −1 K −1 at 1500 K. Furthermore, the coefficients of thermal expansion (CTE) of these solid solutions are precisely tuned within the desired range for SiC (4.4 to 5.5 × 10 −6 K −1 ), while maintaining good mechanical properties. Here, in particular, the addition of Eu 2 Si 2 O 7 demonstrates to be an important variable to the tuning of CTE and lattice thermal conductivity by leveraging its strong anharmonicity, presenting a pioneering avenue for fine-tuning material properties. In summary, this research not only identifies promising TEBC materials with superior thermal properties, but also introduces a valuable computational material design methodology for the rapid discovery of complex materials for harsh environments.

36 MATERIALS SCIENCE↗

First-principles calculation of lattice distortion, electronic structure, and bonding properties of GeTe-based and PbSe-based high-entropy chalcogenides

The massive amount of wasted heat energy from industry has pushed the development of thermoelectric (TE) materials that directly convert heat into electricity to a new level of concern. Recently, multicomponent alloys such as GeTe-based and PbSe-based high-entropy (HE) chalcogenides have attracted a great deal of attention due to their potential application as TE materials. The nature of the interatomic bonding, lattice distortion (LD), and the electronic structure in this class of materials is not fully understood. Herein, we report a comprehensive computational investigation of nine GeTe-based HE alloys with eight metallic elements (Ag, Pb, Sb, Bi, Cu, Cd, Mn, and Sn) with large supercells of 1080 atoms each; seven PbSe-based HE solid solutions: Pb0.99−ySb0.012SnySe1−2xTexSx (x = 0.1, 0.2, 0.25, 0.3, 0.35, 0.4, 0.45, with y = 0) with supercells of 1000 atoms each; and five Pb0.99−ySb0.012SnySe1−2xTexSx (y = 0.05, 0.1, 0.15, 0.2, 0.25 with x = 0.25) solid solutions with supercells of 1000 atoms each. All these HE models are theoretically investigated for the first time. The electronic structure, interatomic bonding, charge transfer, and lattice distortion (LD) are investigated by first-principles calculations based on density functional theory. Multicomponent HE alloys can cause a significant LD, which affects their mechanical, thermal, and TE properties. The calculations for the GeTe-based HE chalcogenides showed that they are semiconductors with a narrow bandgap, except for m8, which has a semi-metallic characteristic, and this makes them good candidates for TE applications. For most of these models, the Fermi level shifts upward and locates deeply in the conduction bands, resulting in the enhancement of the electrical conductivity (σ). The bonding properties showed that most bonds in m5 are more dispersed, indicating highest LD and lower lattice thermal conductivity. For PbSe-based HE solid solutions, the LD calculations showed that the models Pb0.99Sb0.012Se0.5Te0.25S0.25 and Pb0.89Sb0.012Sn0.1Se0.5Te0.25S0.25 have the higher LD, and thus a lower lattice thermal conductivity. Such investigations are in high demand since it enables us to design new HE chalcogenides for TE applications. We use the novel concept of total bond order density as a single quantum mechanical metric to characterize the internal cohesion of these HE alloys and correlate with calculated properties, especially the mechanical properties. This work provides a solid database for HE chalcogenides and a road map for many potential applications. Moreover, the computational procedure we developed can be used to design new HE chalcogenides for specific TE applications.

Physics↗

Tuning Magnetic Symmetry and Properties in the Olivine Series Li 1–x Fe x Mn 1–x PO 4 through Selective Delithiation

In this work, we present the first in-depth study of the nuclear and magnetic structures of the fully lithiated LiFe x Mn 1–x PO 4 solid solutions as well as the partially delithiated Li 1– xFe x Mn 1–x PO 4 series using neutron powder diffraction. By using a weak oxidizing solution that only oxidizes Fe 2+ , we find that lithium can be removed from these olivines in a stepwise manner. Representational analysis was performed on the observed magnetic reflections and found that the lithiated solid solutions order in the magnetic space group Pnma', which is identical to triphylite (LiFePO 4 ). We report that, even when removing 20% of the lithium from the hcp lattice, the magnetic structure changes and multiple magnetic contributions are needed to fully encompass the observed magnetic order. We find that the partially delithiated x = 0.2 and 0.3 have a magnetic structure P2 1 '/n11, and when x surpasses 0.3, the magnetic structure changes to P2 1 2 1 2 1 . We give a detailed report on the effect of delithiation on magnetic order, bond distances/angles, and the super- and supersuperexchange interactions in the material. The symmetries of the magnetic order of these solid solutions are then discussed with regard to their potential as ferrotoroidic candidates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid solubility of Yb{sub 2}Si{sub 2}O{sub 7} in {beta}-, {gamma}- and {delta}-Y{sub 2}Si{sub 2}O{sub 7}

This paper examines the structural changes with temperature and composition in the Yb{sub 2}Si{sub 2}O{sub 7}-Y{sub 2}Si{sub 2}O{sub 7} system; members of this system are expected to form in the intergranular region of Si{sub 3}N{sub 4} and SiC structural ceramics when sintered with the aid of Yb{sub 2}O{sub 3} and Y{sub 2}O{sub 3} mixtures. A set of different compositions have been synthesised using the sol-gel method to obtain a xerogel, which has been calcined at temperatures between 1300 and 1650 deg. C during different times. Isotherms at 1300 and 1600 deg. C have been analysed in detail to evaluate the solid solubility of Yb{sub 2}Si{sub 2}O{sub 7} in {beta}-Y{sub 2}Si{sub 2}O{sub 7} and {gamma}-Y{sub 2}Si{sub 2}O{sub 7}. Although Yb{sub 2}Si{sub 2}O{sub 7} shows a unique stable polymorph ({beta}), Yb{sup 3+} is able to replace Y{sup 3+} in {gamma}-Y{sub 2}Si{sub 2}O{sub 7} and {delta}-Y{sub 2}Si{sub 2}O{sub 7} at high temperatures and low Yb contents. IR results confirm the total solid solubility in the system and suggest a constant SiOSi angle of 180 deg. in the Si{sub 2}O{sub 7} unit across the system. The temperature-composition diagram of the system, obtained from powder XRD data, is dominated by the {beta}-RE{sub 2}Si{sub 2}O{sub 7} polymorph, with {gamma}-RE{sub 2}Si{sub 2}O{sub 7} and {delta}-RE{sub 2}Si{sub 2}O{sub 7} showing reduced stability fields. The diagram is in accordance with Felsche's diagram if average ionic radii are assumed for the members of the solid solution at any temperature, as long as the {beta}-{gamma} phase boundary is slightly shifted towards higher radii. - Graphical abstract: Polymorphism, as a function of average radii, in the systems Yb{sub 2}Si{sub 2}O{sub 7}-Y{sub 2}Si{sub 2}O{sub 7} (dotted symbols), Lu{sub 2}Si{sub 2}O{sub 7}-Y{sub 2}Si{sub 2}O{sub 7} (solid symbols) and Sc{sub 2}Si{sub 2}O{sub 7}-Y{sub 2}Si{sub 2}O{sub 7} (open symbols) compared to phase boundaries of Felsche for pure rare earth disilicates. Circles: {beta}-RE{sub 2}Si{sub 2}O{sub 7}. Squares: {gamma}-RE{sub 2}Si{sub 2}O{sub 7}. Triangles: {delta}-RE{sub 2}Si{sub 2}O{sub 7}. Highlights: > {beta}-Yb{sub 2}Si{sub 2}O{sub 7} and {beta}-Y{sub 2}Si{sub 2}O{sub 7} form a complete solid solution at 1300 deg. C. > Yb(III) replaces Y in {gamma}- and {delta}-RE{sub 2}Si{sub 2}O{sub 7}, at low Yb contents and high temperatures. > Phase diagram of the Yb{sub 2}Si{sub 2}O{sub 7}-Y{sub 2}Si{sub 2}O{sub 7} system is dominated by the {beta}-RE{sub 2}Si{sub 2}O{sub 7} phase. > {gamma}- and {delta}-phases show very reduced stability fields. > {beta}-{gamma} phase boundary in Felsche's diagram should be slightly shifted towards higher radii.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural transition of partially Ba-filled thermoelectric CoSb{sub 3} investigated by positron annihilation spectroscopy

Microstructure of unfilled and Ba-filled CoSb{sub 3} has been studied by positron lifetime measurements together with theoretical calculation. Positron trapping in intrinsic voids is observed in the CoSb{sub 3}, which contributes a positron lifetime of 263 ± 2 ps. After filling Ba atoms with content up to x = 0.4, the positron lifetime shows continuous increase. By comparing the experimental results with calculation following the phase diagram of Ba{sub x}Co{sub 4}Sb{sub 12} with x in the range of 0–0.5, it is found that when the Ba content is lower than 0.16, the filling of Ba atoms is in a phase of solid solution. At x = 0.2, γ phase is formed, which is mixed with solid solution. At x > 0.25, transition from γ phase to a mixture of γ and α phases is confirmed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of a Hydrated Sulfonatotitanyl(IV) Complex in Aqueous Solution and the Dimethylsulfoxide Solvated Titanyl(IV) Ion in Solution and Solid State

The coordination chemistry of oxotitanium(IV) or titanyl(IV), TiO 2+ , has been studied in solution by X-ray methods. The titanyl(IV) ion hydrolyzes easily in aqueous systems to solid titanium dioxide as long as it is not stabilized through complexation. In this study the structures of the hydrated bissulfatotitanyl(IV) complex and the dimethylsulfoxide (DMSO) solvated titanyl(IV) ions have been determined. In isolated monomeric titanyl complexes titanium(IV) binds strongly to a doubly bound oxo group at ca. 1.64 Å, to four ligands in the equatorial plane almost perpendicular to the Ti=O bond at ca. 2.02 Å, and there is one weakly bound ligand, trans to the Ti=O bond, at ca. 2.22 Å, for oxygen donor ligands; the O=Ti–O eq bond angles are 95°–100°. The structure of the DMSO solvated titanyl(IV) ion in the solid state is maintained in DMSO solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of oxide impurities on the chemical tuning of the thermoelectric properties of substitution derivatives of RuIn{sub 3}

A systematic investigation on tuning the charge carrier concentration by substitution of the Ru position in RuIn{sub 3} is performed. Samples with nominal composition Ru{sub 0.95}T{sub 0.05}In{sub 3} (T=Re, Rh, Ir) were synthesized via liquid–solid-reaction and subsequent spark plasma sintering treatment. The chemical composition was characterized by X-ray, metallographic and microstructure analysis revealing solid solutions in the samples with Rh and Ir, whereas Re cannot be incorporated in RuIn{sub 3}. Minor oxide impurities in the commercially available starting elements, the homogeneity range of RuIn{sub 3} and the redox potentials of the participating elements are the key for interpreting the observed lattice parameters and the corresponding composition. Both, substitutions with Rh or Ir and Re inclusions in RuIn{sub 3} lead independently to a significant decrease of the total thermal conductivity down to approximately one half of the value observed for binary RuIn{sub 3}, prepared with commercially available starting materials. The electrical resistivity was reduced by substitution and the temperature dependence changes from semiconductor-like, for RuIn{sub 3}, to metal-like in the substitution derivatives. At the same time the sign change in the thermopower at high temperatures, characteristic for binary RuIn{sub 3}, is suppressed, attaining only electrons as majority carriers. - Graphical abstract: Microstructure (perpendicular to the pressure axis; polarized light) of polycrystalline Ru{sub 0.95}Rh{sub 0.05}In{sub 3} (a), Ru{sub 0.95}Ir{sub 0.05}In{sub 3} (b) and Ru{sub 0.95}Re{sub 0.05}In{sub 3} (c) samples after SPS treatment. - Highlights: • Substitution solid solutions of RuIn{sub 3} were prepared via liquid–solid-reaction. • Chemistry of oxide impurities is crucial for explanation of experimental results. • Thermodynamic calculations support the observation of In{sub 2}O{sub 3} or ZnO as impurities. • Electrical resistivity is reduced by substitution. • Temperature dependence of resistivity changes from semiconductor- to metal-like.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probe Mössbauer spectroscopy of mechanical alloying in binary Cr‐{sup 57}Fe(1 at%) system

Solid state reactions during mechanical alloying (MA) in a binary mixture of powdered Cr and {sup 57}Fe in atomic ratio of 99:1 have been studied using {sup 57}Fe Mössbauer spectroscopy, X-ray diffraction and Auger spectrometry. The proposed model of MA includes formation of Cr(Fe){sub x}O{sub y} oxides at the contact places of Cr and Fe particles, formation of nanostructure with simultaneous dissolution of the oxides, penetration of Fe atoms along grain boundaries in close-to-boundary distorted zones of interfaces in a substitutional position, formation of the substitutional solid solution of Fe in Cr in the body of grains. It was shown that the increase in the BCC lattice parameter on increasing the milling time is due to the dissolution of oxides and formation of interstitial solid solution of O in Cr. There were established substantial differences in consumption of BCC Fe in a Mg → Al → Si → Cr sequence due to the major role of chemical interaction of Mg(Al,Si,Cr) with Fe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Invar Effect and non-collinear magnetism in FeCu alloys

The Invar effect has been observed in many Fe rich alloys, most famously Ni Invar. Generally the Invar behavior is associated with the strong coupling between the lattice and magnetic degrees of freedom, and therefore depends on the magnetic ordering in these alloys. Recent experimental works observed an Invar effect in fcc-FeCu solid solutions. In the present paper the magnetic states of fcc-FeCu solid solutions for various concentrations is investigated. The first principles calculations employ the locally selfconsistent multiple scattering (LSMS) real space method for solving the LDA Kohn-Sham equation to investigate the non collinear ordering of magnetic moments. The magnetic order for the low iron concentration is fount to be non-collinear, spin glass like, and the ferromagnetic order is not stable, whereas for the iron rich alloys for the ground state equilibrium lattice constants a magnetic order with parallel aligned Fe moments is stable. In this configuration the induced moments at the Cu sites order nontrivially on a cone with an opening of approximately 40 degrees around the Fe moment direction.

36 MATERIALS SCIENCE↗

Alternate InP synthesis with aminophosphines: solution–liquid–solid nanowire growth

Indium phosphide nanowires are important components in high-speed electronics and optoelectronics, including photodetectors and photovoltaics. However, most syntheses either use high-temperature and costly vapor-phase methodology or highly toxic and pyrophoric tris(trimethylsilyl)phosphine. To expand on the success of the aminophosphine-based InP colloidal quantum dot synthesis, we developed a synthesis for thin (~11 nm) zinc blende InP nanowires at 180 °C using indium tris(trifluoroacetate) and tris(diethylamino)phosphine. A flat nanoribbon morphology was identified by transmission electron and atomic force microscopy analysis, with the stoichiometric (110) lattice plane exposed. Nanowire growth proceeded through a solution–liquid–solid mechanism from in situ-formed indium metal nanoparticles. Molecular byproducts of tris(oleylamino)phosphine oxide and N-oleyltrifluoroacetamide observed by 31 P and 19 F NMR spectroscopy inform a proposed mechanism of indium reduction by the aminophosphine. Morphological control over the nanowire product was achieved by varying the phosphorus injection to control the aspect ratio, the In : P ratio to toggle between nanowires and multipods, and the pre-hot injection evacuation step to favor a quantum dot product. Furthermore, replacing the indium precursor with indium tris(trifluoromethanesulfonate) was found to make bulk zinc blende InP nanowires with an average diameter of >250 nm and tens of microns in length.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High‐Throughput Evaluation of Hardening Coefficients of Eight Alloying Elements in Magnesium

Liquid–solid diffusion couples (LSDCs) are employed to generate a composition gradient in the single‐phase hexagonal closed‐packed (hcp) solid solution with compositions up to the solubility limit of various solutes in Mg. Nanoindentation scanning across the composition gradient in LSDCs allows effective evaluation of composition‐dependent hardness of eight alloying elements (Al, Ca, Ce, Gd, Li, Sn, Y, and Zn) in the hcp Mg phase. The hardening coefficients, an indicator of the potency of solid‐solution hardening, are evaluated from the measured composition‐hardness data and correlated with various materials properties such as atomic radius, shear modulus, and elastic modulus of the solutes. The rank of hardening potency of Al, Gd, Sn, Y, and Zn measured by nanoindentation is in good agreement with that measured by microindentation reported in the literature. The hardening coefficient (potency) from the strongest to the weakest is Ce > Ca > Y ≈ Gd > Zn > Al ≈ Sn > Li in Mg‐based hcp binary solid solutions. The hardening coefficient is found to be closely correlated with the strengthening potency.

36 MATERIALS SCIENCE↗

Dissimilar Joining of Pure Aluminum to SiC{sub p}/Al-MMCs Using an AlMgGaLi Active Interlayer Foil

To broaden the application of advanced metal matrix composites in the electronic packaging industry, a lead-free AlMgGaLi interlayer was developed for active soldering of aluminum to aluminum metal matrix composites. The effect of joining pressure on the microstructure evolution, interfacial wettability and mechanical properties of the dissimilar joints was investigated. The experimental results indicated that as the joining pressure increased, the mean thickness of the bond seam was 46.02 μm, and solidification of a solid solution occurred (detected by SEM/XRD analysis). The composition of the Al-based solid solution (in atom%) was 86.52% Al, 9.32% Mg, 2.56% O, 1.5% Ga and 0.1% Si. The pressure improved the interfacial wettability by enhancing the atom diffusion between the interlayer and parent materials. The joint shear strength initially increased and then decreased, and a sound joint with a maximum shear strength of ~ 45 MPa was produced at 450 °C and 0.75 MPa. The fracture crack initially occurred at the interfaces of the Al/filler metal and then propagated mainly along the Al{sub 2}O{sub 3} layer on the Al side. A novel model describing the pressure-induced microstructure changes within the joint and the formation of an Al{sub 2}O{sub 3} diffusion barrier layer at the Al/filler metal interface is proposed.

36 MATERIALS SCIENCE↗

Solid-state dewetting of Au/Ni bilayers: The effect of alloying on morphology evolution

The solid-state dewetting of thin Au/Ni bilayers deposited onto SiO{sub 2}/Si substrates is investigated. A rapid thermal treatment is used to induce the dewetting process by an increase in temperature. The evolution of the (111) peaks of X-ray diffraction reveals a characteristic change due to mixing of Au and Ni. At low temperature, the Au-Ni thin film is found to break up at the phase boundaries and growing voids are shown to be surrounded by a Ni-rich phase. Branch-like void growth is observed. Upon annealing at increasing temperatures, Au-Ni solid solutions are formed well above the bulk equilibrium solubility of Au and Ni. It is found that this metastable phase formation makes the Au-Ni thin film less vulnerable to rupturing. Moreover, growth mode of still evolving voids changes into a more regular, faceted one due to alloying. Finally, it is shown that annealing above the miscibility gap forms supersaturated, well-oriented Au-Ni solid solution agglomerates via dewetting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A map of single-phase high-entropy alloys

High-entropy alloys have exhibited unusual materials properties. The stability of equimolar single-phase solid solution of five or more elements is supposedly rare and identifying the existence of such alloys has been challenging because of the vast chemical space of possible combinations. Herein, based on high-throughput density-functional theory calculations, we construct a chemical map of single-phase equimolar high-entropy alloys by investigating over 658,000 equimolar quinary alloys through a binary regular solid-solution model. We identify 30,201 potential single-phase equimolar alloys (5% of the possible combinations) forming mainly in body-centered cubic structures. We unveil the chemistries that are likely to form high-entropy alloys, and identify the complex interplay among mixing enthalpy, intermetallics formation, and melting point that drives the formation of these solid solutions. We demonstrate the power of our method by predicting the existence of two new high-entropy alloys, i.e. the body-centered cubic AlCoMnNiV and the face-centered cubic CoFeMnNiZn, which are successfully synthesized.

36 MATERIALS SCIENCE↗

The Mechanism of Porosity Formation During Solvent-Mediated Phase Transformations

Solvent-mediated solid–solid phase transformations often result in the formation of a porous medium, which may be stable on long time scales or undergo ripening and consolidation. We have studied replacement processes in the KBr–KCl–H2O system using both in situ and ex situ experiments. The replacement of a KBr crystal by a K(Br,Cl) solid solution in the presence of an aqueous solution is facilitated by the generation of a surprisingly stable, highly anisotropic and connected pore structure that pervades the product phase. This pore structure ensures efficient solute transport from the bulk solution to the reacting KBr and K(Br,Cl) surfaces. The compositional profile of the K(Br,Cl) solid solution exhibits striking discontinuities across disc-like cavities in the product phase. Similar transformation mechanisms are probably important in controlling phase-transformation processes and rates in a variety of natural and man-made systems.

99 GENERAL AND MISCELLANEOUS↗

Design of Light-Weight High-Entropy Alloys

High-entropy alloys (HEAs) are a new class of solid-solution alloys that have attracted worldwide attention for their outstanding properties. Owing to the demand from transportation and defense industries, light-weight HEAs have also garnered widespread interest from scientists for use as potential structural materials. Great efforts have been made to study the phase-formation rules of HEAs to accelerate and refine the discovery process. In this paper, many proposed solid-solution phase-formation rules are assessed, based on a series of known and newly-designed light-weight HEAs. The results indicate that these empirical rules work for most compositions but also fail for several alloys. Light-weight HEAs often involve the additions of Al and/or Ti in great amounts, resulting in large negative enthalpies for forming solid-solution phases and/or intermetallic compounds. Accordingly, these empirical rules need to be modified with the new experimental data. In contrast, CALPHAD (acronym of the calculation of phase diagrams) method is demonstrated to be an effective approach to predict the phase formation in HEAs as a function of composition and temperature. Future perspectives on the design of light-weight HEAs are discussed in light of CALPHAD modeling and physical metallurgy principles.

36 MATERIALS SCIENCE↗