SEARCH · Engineering Papers
Results for “sintering”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Rapid Laser Reactive Sintering for Sustainable and Clean Preparation of Protonic Ceramics
Not Available
Transformation of Sintered CsPbBr 3 Nanocrystals to Cubic CsPbI 3 and Gradient CsPbBr x I 3– x through Halide Exchange
Not Available
New Mechanism for Ferroelectricity in the Perovskite Ca 2– x Mn x Ti 2 O 6 Synthesized by Spark Plasma Sintering
Perovskite oxides hosting ferroelectricity are particularly important materials for modern technologies. The ferroelectric transition in the well-known oxides BaTiO 3 and PbTiO 3 is realized by softening of a vibration mode in the cubic perovskite structure. For most perovskite oxides, octahedral-site tilting systems are developed to accommodate the bonding mismatch due to a geometric tolerance factor t = (A–O)/[√2(B–O)] < 1. In the absence of cations having lone-pair electrons, e.g., Bi 3+ and Pb 2+ , all simple and complex A-site and B-site ordered perovskite oxides with a t < 1 show a variety of tilting systems, and none of them become ferroelectric. The ferroelectric CaMnTi 2 O 6 oxide is, up to now, the only one that breaks this rule. It exhibits a columnar A-site ordering with a pronounced octahedral-site tilting and yet becomes ferroelectric at T c ≈ 650 K. Most importantly, the ferroelectricity at T < Tc is caused by an order–disorder transition instead of a displacive transition; this character may be useful to overcome the critical thickness problem experienced in all proper ferroelectrics. Application of this new ferroelectric material can greatly simplify the structure of microelectronic devices. However, CaMnTi2O6 is a high-pressure phase obtained at 7 GPa and 1200 °C, which limits its application. Here we report a new method to synthesize a gram-level sample of ferroelectric Ca 2–x Mn x Ti 2 O 6 , having the same crystal structure as CaMnTi 2 O 6 and a similarly high Curie temperature. The new finding paves the way for the mass production of this important ferroelectric oxide. In conclusion, we have used neutron powder diffraction to identify the origin of the peculiar ferroelectric transition in this double perovskite and to reveal the interplay between magnetic ordering and the ferroelectric displacement at low temperatures.
Oxygen-promoted catalyst sintering influences number density, alignment, and wall number of vertically aligned carbon nanotubes
A lack of synthetic control and reproducibility during vertically aligned carbon nanotube (CNT) synthesis has stifled many promising applications of organic nanomaterials. Oxygen-containing species are particularly precarious in that they have both beneficial and deleterious effects and are notoriously difficult to control. In this paper, we demonstrated diatomic oxygen's ability, independent of water, to tune oxide-supported catalyst thin film dewetting and influence nanoscale (diameter and wall number) and macro-scale (alignment and density) properties for as-grown vertically aligned CNTs. In particular, single- or few-walled CNT forests were achieved at very low oxygen loading, with single-to-multi-walled CNT diameters ranging from 4.8 ± 1.3 nm to 6.4 ± 1.1 nm over 0–800 ppm O 2 , and an expected variation in alignment, where both were related to the annealed catalyst morphology. Morphological differences were not the result of subsurface diffusion, but instead occurred via Ostwald ripening under several hundred ppm O 2 , and this effect was mitigated by high H 2 concentrations and not due to water vapor (as confirmed in O 2 -free water addition experiments), supporting the importance of O 2 specifically. Further characterization of the interface between the Fe catalyst and Al 2 O 3 support revealed that either oxygen-deficit metal oxide or oxygen-adsorption on metals could be functional mechanisms for the observed catalyst nanoparticle evolution. Finally, taken as a whole, our results suggest that the impacts of O 2 and H 2 on the catalyst evolution have been underappreciated and underleveraged in CNT synthesis, and these could present a route toward facile manipulation of CNT forest morphology through control of the reactive gaseous atmosphere alone.
A sinter-free future for solid-state battery designs
The newly developed sequential decomposition synthesis (SDS) method permits the fabrication of ceramic solid electrolytes with thickness close to today's polymer separators and offers opportunities to obtain the desired phase at reduced temperatures.
A novel compact three-dimensional laser-sintered collimator for neutron scattering
Improvements in the available flux at neutron sources are making it increasingly feasible to obtain refineable neutron diffraction data from samples smaller than 1 mm{sup 3}. The signal is typically too weak to introduce any further sample environment in the 30–50 mm diameter surrounding the sample (such as the walls of a pressure cell) due to the high ratio of background to sample signal, such that even longer count times fail to reveal reflections from the sample. Many neutron instruments incorporate collimators to reduce parasitic scattering from the instrument and from any surrounding material and larger pieces of sample environment, such as cryostats. However, conventional collimation is limited in the volume it can focus on due to difficulties in producing tightly spaced neutron-absorbing foils close to the sample and in integrating this into neutron instruments. Here we present the design of a novel compact 3D rapid-prototyped (or “printed”) collimator which reduces these limitations and is shown to improve the ratio of signal to background, opening up the feasibility of using additional sample environment for neutron diffraction from small sample volumes. The compactness and ease of customisation of the design allows this concept to be integrated with existing sample environment and with designs that can be tailored to individual detector geometries without the need to alter the setup of the instrument. Results from online testing of a prototype collimator are presented. The proof of concept shows that there are many additional collimator designs which may be manufactured relatively inexpensively, with a broad range of customisation, and geometries otherwise impossible to manufacture by conventional techniques.
Enhanced copper micro/nano-particle mixed paste sintered at low temperature for 3D interconnects
An enhanced copper paste, formulated by copper micro- and nano-particles mixture, is reported to prevent paste cracking and obtain an improved packing density. The particle mixture of two different sizes enables reduction in porosity of the micro-paste and resolves the cracking issue in the nano-paste. In-situ temperature and resistance measurements indicate that the mixed paste has a lower densification temperature. Electrical study also shows a ∼12× lower sheet resistance of 0.27 Ω/sq. In addition, scanning electron microscope image analysis confirms a ∼50% lower porosity, which is consistent with the thermal and electrical results. The 3:1 (micro:nano, wt. %) mixed paste is found to have the strongest synergistic effect. This phenomenon is discussed further. Consequently, the mixed paste is a promising material for potential low temperature 3D interconnects fabrication.
Spark plasma sintering versus hot pressing – densification, bending strength, microstructure, and tribological properties of Ti5Al2.5Fe alloys
Not provided.
Direct Visualization of Metal Sintering and Powder Bed Fusion of 316 Stainless Steel Powders via In Situ Scanning Electron Microscopy
Explore the source record for details and available documents.
Improved additive manufacturing of silicon carbide parts via pressureless electric field-assisted sintering
Not provided.
Suppressed grain growth in highly porous barium titanate foams by two-step sintering
Not provided.