Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rock”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Rock Valley Accelerated Weight Drop Preliminary P-wave Tomographic Model

An active source experiment using an accelerated weight drop was conducted in Rock Valley, Nevada National Security Site, during the spring of 2021 in order to characterize the shallow seismic structure of the region. P-wave first arrival travel times picked from this experiment were used to construct a preliminary 3-D compressional wave speed model over an area that is roughly 4 km wide east-west and 8 km north-south to a depth of about 500-600 m below the surface, but with primary data concentration along the transects of the experimental lines. The preliminary model shows good correlation with basic geology and surface features, but geological interpretation is not the focus of this report. We describe the methods used in the tomographic inversion of the data and show results from this preliminary P-wave model.

42 ENGINEERING↗
DOE OSTI2021

Rock Valley Accelerated Weight Drop Seismic Data Processing and Picking of P-wave and S-wave Arrival Times

Rock Valley, in the southern end of the Nevada National Security Site, hosts a fault system that was responsible for a shallow (< 3 km below surface ) magnitude 3.7 earthquake in May 1993. In order to better understand this system, seismic properties of the shallow subsurface need to be better constrained. In April and May of 2021, accelerated weight drop (AWD) active-source seismic data were recorded in order to measure P- and S-wave travel-times for the area. This report describes the processing and phase picking of the recorded seismic waveforms. In total, we picked 7,982 P-wave arrivals at offsets up to ~2500 m, and 4,369 S-wave arrivals at offsets up to ~2200 m. These travel-time picks can be inverted for shallow P-wave and S-wave velocity structure in future studies.

58 GEOSCIENCES↗
DOE OSTI2021

Isotopic fractionation as in-situ sensor of subsurface reactive flow and precursor for rock failure

Greater utilization of subsurface reservoirs perturbs in-situ chemical-mechanical conditions with wide ranging consequences from decreased performance to project failure. Understanding the chemical precursors to rock deformation is critical to reducing the risks of these activities. To address this need, we investigated the coupled flow-dissolution- precipitation-adsorption reactions involving calcite and environmentally-relevant solid phases. Experimentally, we quantified (1) stable isotope fractionation processes for strontium during calcite nucleation and growth, and during reactive fluid flow; (2) consolidation behavior of calcite assemblages in the common brines. Numerically, we quantified water weakening of calcite using molecular dynamics simulations; and quantified the impact of calcite dissolution rate on macroscopic fracturing using finite element models. With microfluidic experiments and modeling, we show the effect of local flow fields on the dissolution kinetics of calcite. Taken together across a wide range of scales and methods, our studies allow us to separate the effects of reaction, flow, and transport, on calcite fracturing and the evolution of strontium isotopic signatures in the reactive fluids.

42 ENGINEERING↗
DOE OSTI2022

Blue Rock CropSpanPV - Low Cost Racking for Agricultural Solar Photovoltaics

In this work, a total of four solar panel layouts, applied to Agrivoltaics, are investigated. This study presents two hypotheses: 1. Prefabrication - Lower total cost can be achieved by constructing a pre-assembled, pre-wired solar array in a factory, with automation, then rapidly deploying it in the field. 2. Tension Structures - Using tension structures in a way to suspend an overhead solar array also reduces costs when compared to conventional support methods. Designs are presented for frames to hold the panels. Configurations are advanced to connect the frames into arrays. Supports and foundations to hold the arrays in the desired layout are calculated, selected and presented. Cost models are prepared for the four layouts, which include definition of the business enterprise, the manufacturing operation, and the required facility for production at scale. Cost models include, detail material and task/labor take-offs for both manufacturing and installation. Comparisons with conventional system adapted to Agrivoltaics reveal that the two hypotheses do not hold true. A prefabricated array requires additional material that is not needed in the base system and the cost of this additional material is not outweighed by the cost savings of reduced field installation. The cost of wire rope for a tension structure does result in an economy of material, however, the cost of end connections and tensioning devices adds significantly to the cost of the overall tension structure. Foundation loads with tension structures, especially the large wind uplift seen with a fixed tilt solar array, impose significant constraints and high costs. The following conclusions are recommended for further consideration: 1. Best Case Agrivoltaic Configuration - The best value/lowest cost configuration for agrivoltaics is the installation of solar panels mounted on a single axis tracker in either a 2-in-portrait or 2-in landscape arrangement. This is useful for grazing lands and for staple crops which require high light levels. These applications represent the vast majority of the potential agrivoltaic market. Important elements in this configuration are the specific geometric layout coordinated with the various field operations and a control system linked between the farm equipment and single axis tracker. The control system is to monitor location and orientation, then actively tilt the solar panels or brake the field equipment to provide clearance and avoid collisions. 2. Long Span Applications - The use of tension structures for an overhead fixed tilt array is beneficial where long spans are a necessity, especially where the base support in the project location has consolidated rock near the surface or some other solid structure. One application is spanning wide irrigation canals. Another may be as an installation at the top deck of parking structures. 3. Direct Ground Mount Configuration – Having skids at the base of a pre-fabricated array that extend when the array is deployed, could be a successful design. This could be a useful strategy for dense, flat, ground-mount configurations like that employed by a couple of successful commercial operations (5G Maverick and Erthos). Arrays would be orientated north and south, deployed very low on prepared grade. Arrays would be aligned closely next to each other and anchored with small ground screws or simply with ballast. This same product arrangement could be very useful for rapid deployment and set-up of solar arrays for temporary deployments, disaster response and the military operations

14 SOLAR ENERGY↗
DOE OSTI2022

Technical Feasibility of Compressed Air Energy Storage (CAES) Utilizing a Porous Rock Reservoir

Pacific Gas & Electric Company (PG&E) conducted a project to explore the viability of underground compressed air energy storage (CAES) technology. CAES uses low-cost, off-peak electricity to compress air into a storage system in an underground space such as a rock formation or salt cavern. When electricity is needed, the air is withdrawn and used to drive a generator for electricity production.

25 ENERGY STORAGE↗
DOE OSTI2024

ML-Based Rock Properties and Seismic Volume Enhancement

This project aims to improve field-scale Carbon Capture and Storage (CCS) assessments by enhancing petrophysical and geophysical log predictions through machine learning and neural networks. In our work during EY23, we applied Conditional Variational Autoencoders (CVAEs) to predict compressional velocity (Vp) and assess CO2 saturation levels in geological formations at the Illinois Basin Decatur Project (IBDP). In another task, we improved full-waveform inversion (FWI) methods with machine-learning approaches using lithological constraints. Full-waveform inversion (FWI) of seismic data estimates the elastic properties of subsurface rocks with high spatial resolution.

Nathanail, Athanasios↗
DOE OSTI2023

Rock Valley Direct Comparison Relocation Working Group Location Results and Recommendations

Work accomplished: Collected and compared historic data for the 1993 Rock Valley earthquake sequence; Compared preliminary and prior location work from different location algorithms, phase pick sets, station constellations, and velocity models; Selected a common set of stations that could be used across all location methods for consistency; Reviewed 8 different sets of phase picks and converged on a single, reviewed set of picks for all common stations; Evaluated four pre-existing regional velocity models and incorporated new and preliminary results for five new velocity models that provide information on the very shallow (< 2km) structure near station RTPP; Compared location results from different methods while using the common sets of picks, stations, and velocity models

58 GEOSCIENCES↗
DOE OSTI2024

Computational Modeling of Proppants Transport in Rock Fractures

Presentation describing the direct numerical simulations (DNS) of fluid and particulate transport through rough-walled rock fractures showing transport properties of proppants as a function of fracture properties, injection velocity, and proppant size. Results demonstrate the particulate transport is highly influenced by the ratio of proppant diameter to mean fracture aperture, and quantified in terms of areal space that proppant coverage occurs.

Rousta, Farid↗
DOE OSTI2024

Rare Earth Elements (REEs) Measurement in Coal and Rock Mineral Matrices

Although critical minerals including rare earth elements (REEs) can be analyzed in laboratory by some established and reliable laboratory based analytical techniques, their in-situ measurements in the field have always been challenging. For identification of REE-rich sites and REEs distribution measurement, portable field applicable technologies are paramount. As Laser-induced breakdown spectroscopy (LIBS) has enormous potential for field measurement, it has been explored for REEs measurements by many research groups. However, most of the studies are still dealing with simulated samples with traditional bench top experiments. In real world, REEs are available in various types of natural complex matrices in low content depending on the geographical locations. Considering this, LIBS has been evaluated for REE measurement in two different complex coal and rock mineral matrices representing some natural REE-rich sites. In addition, multiple samples collected from some natural sites in Wyoming, USA were experimented by using NETL’s bench top as well as miniaturized prototype setups for REE measurements.

Bhatt, Chet R.↗
DOE OSTI2024

Investigating Material Properties of Subsurface Rock Formations Modified by Engineering Mineral Precipitation (Final Scientific and Technical Report)

Montana State University’s (MSU) Energy Research Institute (ERI), in collaboration with the Center for Biofilm Engineering (CBE) and the Department of Civil Engineering (CE), has conducted a long‐term research program aimed at developing a novel cementing agent to address wellbore integrity and reduce the unwanted upward migration of fluids and greenhouse gases from the subsurface. The primary technology developed through this research program is known as ureolysis‐induced calcite precipitation (UICP), which harnesses bio‐chemical processes to precipitate calcium carbonate (CaCO 3 ). The same general process can also be called microbially-induced calcium carbonate precipitation (MICP) when microbes provide the process-catalyzing urease enzyme. Both terms are used in this report. Results have conclusively demonstrated that, if properly controlled, UICP can successfully seal fractures, high permeability zones, and compromised cement in the vicinity of wellbores and in nearby caprock. This technology has been successfully deployed to mitigate annular leakage in two test wells and over sixty commercial wells with a 100% success rate. This success in downhole deployment generates consideration of other subsurface applications where UICP could provide benefit to the energy sector, such as shale property modification for unconventional oil and gas recovery. The focus of this research project was to investigate fundamental material and mechanical properties of select shale cores and analyze how these properties change due to engineered mineral precipitation with the intent to control these properties to achieve a range of engineering objectives. Ultimately, the project aim was to identify valuable new areas where application of UICP might contribute to national energy security and environmental protection. The research workplan coupled UICP treatment of core samples, nuclear magnetic resonance (NMR) characterization, and mechanical strength testing at MSU with advanced X‐Ray micro-computed tomography (μCT) imaging and numerical modeling performed by collaborators at two national laboratories, the National Energy Technology Laboratory (NETL) and Lawrence Berkeley National Laboratory (LBNL). Experimental results are useful to inform geo-mechanical models which could be applied to predict mineralized rock formation behavior at field scale. Our findings suggest that NMR and μCT methods to detect and quantify biomineral formation in shale fractures are complementary and consistent with each other. Either could be used to estimate the volume of new mineral formed by UICP in shale fractures. The use of surfactants and guar gum to enhance biomineral precipitation in shale fractures merits further research. UICP can, under some conditions, increase the tensile strength of sealed shale fractures beyond that of the intact shale. These findings demonstrate that continued research in this area may be valuable to understanding and improving shale resource recovery techniques.

58 GEOSCIENCES↗
DOE OSTI2025

White Rock Canyon Riparian Monitoring

Lands at Los Alamos National Laboratory (LANL) are owned and managed by the Department of Energy, National Nuclear Security Administration (DOE/NNSA). The Laboratory’s eastern boundary is in White Rock Canyon (WRC) along the Rio Grande within Technical Areas (TAs) 70 and 33, with approximately 4 miles of property along the river (Figure 1). Feral cattle have been documented along the Rio Grande in WRC since the 1980s. Cattle activity is known to be especially harmful to riparian ecosystems, which are hubs for biodiversity and crucial habitat used by multiple endangered species in this region, including the Southwestern Willow Flycatcher and Yellow-billed Cuckoo on LANL property (Poessel 2020, Sanchez 2021). To gain a comprehensive understanding of the status of riparian ecosystems within WRC and the damage feral cattle populations are imposing, ecologists at LANL conducted a month-long vegetation monitoring project in September 2025. Riparian vegetation monitoring protocols and rapid assessments of cattle impacts were used to quantify the intensity and extent of cattle damage. The data collected will be used as a baseline for comparison following the removal of feral cattle from the canyon. Abundant cattle sign indicates current and heavy utilization of the riparian areas that were surveyed. There are multiple wallowing areas where soils are completely denuded of vegetation and highly compacted. Based on the severity and extent of impact observed in these areas, cattle use appears consistent and on-going over an extended period of years, supporting the need for removal and restoration management.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Argon-isotopic Age Dating Analyses for Eastern Snake River Plain Volcanic Rock Samples

Argon-isotopic age dating analyses were conducted on 25 volcanic rock samples obtained from 22 boreholes and collected at three surface locations in the Eastern Snake River Plain (ESRP). The analyses were conducted to reduce uncertainties for characterizing volcanic hazards at Idaho National Laboratory (INL) as part of the Senior Seismic Hazard Analysis Committee (SSHAC) Level 3 Probabilistic Volcanic Hazards Assessment (PVHA). Results of the argon-isotopic age dating analyses will be used to estimate the recurrence of basaltic and silicic volcanism and for assessing the spatial and temporal distributions of volcanic events in the ESRP.

58 - GEOSCIENCES↗
DOE OSTI2026

Subsurface mafic and ultramafic rock mapping and analysis for carbon mineralization in the United States (SubMAP-CO 2 )

Achieving durable, gigaton-scale carbon dioxide (CO₂) removal will require the development of storage strategies that are both permanent and scalable. Among the available options, carbon mineralization in mafic and ultramafic rocks offers a uniquely robust pathway for long-term CO₂ sequestration, converting CO₂ into thermodynamically stable carbonate minerals. While surface exposures of these lithologies have been extensively studied, particularly in ophiolitic and volcanic settings, the potential for carbon mineralization in the subsurface remains comparatively underexplored at national scale. This gap limits the ability to assess storage capacity, accessibility, and deployment pathways for mineralization-based carbon management in the United States.

08 HYDROGEN↗
DOE OSTI2025

Diffusion kinetics of 3 He in pyroxene and plagioclase and applications to cosmogenic exposure dating and paleothermometry in mafic rocks

In this study, we investigate the diffusivity of cosmogenic 3 He in a variety of plagioclase and pyroxene compositions, and its application to paleothermometry and exposure dating in these minerals, through stepwise degassing experiments. While cosmogenic 3 He has been utilized for exposure dating in pyroxene for decades due to its retentivity, plagioclase, often found along with pyroxene in mafic rocks, is generally less retentive of cosmogenic noble gas. However, the diffusivity of 3 He in either plagioclase or pyroxene has not yet been measured quantitatively. A challenge in measuring diffusion kinetics by step-degassing experiments in poorly retentive minerals is the fact that significant amounts of He can be lost prior to the experiment. To address this issue, we apply a forward “multiple diffusion domain” (MDD) inversion model that includes model predictions of initial gas loss during irradiation and storage of the samples to account for this observation and add constraints to the diffusion parameters. We find that 3 He diffusivity in plagioclase appears to be highly variable. This variability can be explained by the MDD inversion models' inability to constrain the diffusion parameters when significant gas has been lost during irradiation and/or prolonged storage prior to experiment analysis, resulting in an overestimation of 3 He retentivity. Plagioclase samples that were kept frozen after irradiation, to limit this initial gas loss, yielded the most reliable estimate of diffusion kinetics. We find that 3 He in plagioclase is diffusively lost at Earth's surface temperatures on a timescale of 100 years and is therefore unsuitable for surface temperature paleothermometry. On the contrary, we find cosmogenic 3 He in pyroxene to be retentive at Earth's surface temperatures on a 1-million-year timescale.

Bergelin, Marie [Berkeley Geochronology Center (BG↗
NASA NTRS1965

Rock bit requires no flushing medium to maintain drilling speed

Steel drill bit having terraces of teeth intersected by spiral grooves with teeth permits the boring of small holes through rock with low power. The cuttings are stored in a chamber behind the cutting head. Could be used as sampling device.

Source record↗