Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reference models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

The discovery of an O subdwarf in the globular cluster NGC 6712

Spectral data for C49 in the globular cluster NGC 6712 are examined with reference to evolutionary models for low-mass stars that are contracting into white dwarfs. The spectrum of this star is found to be almost identical to that of the first sdO star found in a globular cluster, star A in NGC 6397. Analysis of the spectral data using nonlocal thermodynamic equilibrium models gives surface parameters T not less than 50,000 K, log g = 5.5 plus or minus 0.5, and N(He)/N(H) approximately equal to 0.1. The results are consistent with the models considered.

Remillard, R. A.↗

Bubble migration in a rotating, liquid-filled sphere

Results and analysis of ground-based experiments performed to aid in designing experiments on the behavior of bubbles in a rotating liquid body on board the Shuttle in free fall are presented. Spherical shells filled with silicone oil containing a small gas bubble were spun and filmed by high speed motion picture photography. The rotation of the shell and the trajectory of the bubble motion were recorded and the film was exposed to a motion analyzer connected to a keypunch. The analyzer measured Cartesian coordinates as well as angle, frame number, and rotation rate. Optical correction equations were employed to determine the apparent bubble trajectory relative to an inertial frame of reference. An analytical model for the bubble motion was defined, yielding predictions of velocity and position at different times. Rotation of the fluid container is concluded to aid in centering the bubbles.

Annamalai, P.↗

Global matrix of thermospheric density values for selected solar/geomagnetic conditions and spacecraft orbital attitudes

Presented are selected thermospheric/exospheric global mean and extreme density values computed between 130 and 1100 km altitude. These values were generated from the MSFC/J70 reference orbital atmospheric model using different input conditions of solar flux and geomagnetic index, ranging from low to peak. Typical magnitudes of day-night density changes are presented, as an example, for use in space vehicle orbital analyses.

Johnson, D. L.↗

Some recent developments in spectral methods

This paper is solely devoted to spectral iterative methods including spectral multigrid methods. These techniques are explained with reference to simple model problems. Some Navier-Stokes algorithms based on these techniques are mentioned. Results on transition simulation using these algorithms are presented.

Hussaini, M. Y.↗

Structure of the geomagnetic tail

Observational data on the structure of the earth magnetotail are summarized and discussed, with reference to theoretical models. Particular attention is given to the interplanetary control of the tail, the magnetic-field structure, the plasma-sheet boundary layer, the magnetotail plasma parameters, the chemical composition of the tail, and the evidence indicating that a steady-state magnetotail cannot exist. Extensive diagrams and graphs are provided.

Fairfield, D. H.↗

Arecibo emission-absorption observations of Galactic OH

Observations of OH emission/absorption toward 19 low-Galactic-latitude background-continuum sources are reported. Data obtained at 1.665 and 1.667 GHz using the 12-m radio telescope at Arecibo Observatory during February-March 1984, are presented in extensive tables and graphs and characterized in detail, with reference to theoretical models. A total of 11 OH absorption features were detected toward nine of the sources, with an average of one feature of optical depth 0.02 or greater per 5 kpc of path length and an average column density of 1.6 x 10 to the 12th/sq cm (corrected to b = 90 deg).

Colgan, Sean W. J.↗

Nonlinear dynamics, fractals, cardiac physiology and sudden death

The authors propose a diametrically opposite viewpoint to the generally accepted tendency of equating healthy function with order and disease with chaos. With regard to the question of sudden cardiac death and chaos, it is suggested that certain features of dynamical chaos related to fractal structure and fractal dynamics may be important organizing principles in normal physiology and that certain pathologies, including ventricular fibrillation, represent a class of 'pathological periodicities'. Some laboratory work bearing on the relation of nonlinear analysis to physiological and pathophysiological data is briefly reviewed, with tentative theories and models described in reference to the mechanism of ventricular fibrillation.

Goldberger, Ary L.↗

Candidate sample acquisition systems for the Rosetta

The Comet Nucleus Sample Return (CNSR) mission, one of the four cornerstones of the ESA scientific program, is one of the most complex space ventures within the next century, both from technological and deep space exploration point of view. In the Rosetta scenario the sample acquisition phase represents the most critical point for the global mission's success. The proposed paper illustrates the main results obtained in the context of the CNSR-SAS ongoing activity. The main areas covered are related to: (1) sample properties characterization (comet soil model, physical/chemical properties, reference material for testing); (2) concepts identification for coring, shovelling, harpooning and anchoring; (3) preferred concept (trade off among concepts, identification of the preferred configuration); and (4) proposed development activity for gaining the necessary confidence before finalizing the CNSR mission. Particular emphasis will be given to the robotic and flexibility aspects of the identified sample acquisition systems (SAS) configuration, intended as a means for the overall system performance enhancement.

Magnani, P. G.↗

Theft of information in the take-grant protection model

Questions of information flow are in many ways more important than questions of access control, because the goal of many security policies is to thwart the unauthorized release of information, not merely the illicit obtaining of access rights to that information. The Take-Grant Protection Model is a theoretical tool for examining such issues because conditions necessary and sufficient for information to flow between two objects, and for rights to objects to be obtained or stolen, are known. These results are extended by examining the question of information flow from an object the owner of which is unwilling to release that information. Necessary and sufficient conditions for such theft of information to occur are derived, and bounds on the number of subjects that must take action for the theft to occur are presented. To emphasize the usefulness of these results, the security policies of complete isolation, transfer of rights with the cooperation of an owner, and transfer of information (but not rights) with the cooperation of the owner are presented; the last is used to model a simple reference monitor guarding a resource.

Bishop, Matt↗

Development of an integrated BEM for hot fluid-structure interaction

A boundary element approach is developed for problems of hot fluid-structure interaction. The structure is idealized as a thermoelastic solid, and a time-domain, boundary-only integral formulation is described. Meanwhile, several approaches are discussed for the hot fluid. Integrals equations are developed for both compressible and incompressible thermoviscous flow. Due to the presence of nonlinear convective terms in the governing differential equations, domain discretization is generally required. However, with the introduction of reference velocities, volume modeling often can be confined to regions near obstacles and walls. All formulations are implemented for two-dimensional problems in GPO-BEST, a general purpose boundary element computer program. An overview of this numerical implementation is provided, along with several illustrative examples. The present fluid formulations are appropriate in the low to medium Reynolds number ranges; however, some enhancements required for higher speed simulations are noted.

Dargush, G. F.↗

The gamma-ray light curves of SN 1987A

Observations of the SN 1987A ejecta in four Co-56-decay gamma-ray lines, obtained using the SMM gamma-ray spectrometer between February 1987 and May 1989, are reported and analyzed. The instrument characteristics and data-reduction procedures are described, and the results are presented in extensive tables and graphs and discussed with reference to theoretical models. Gamma-ray fluxes significantly above possible instrumental levels (as determined from analysis of pre-1987 data) were detected in the second half of 1987 and the first half of 1988. The data are found to favor a model with some Co-56 in regions of low gamma-ray optical depth by 200 d after the SN outburst over models with all Co-56 at one depth within a uniform expanding envelope. Also investigated are the gamma-ray contribution to the total bolometric luminosity and the escape (and potential observability) of Co-57 gamma rays.

Leising, Mark D.↗

Resource envelope concepts for mission planning

Seven proposed methods for creating resource envelopes for Space Station Freedom mission planning are detailed. Four reference science activity models are used to illustrate the effect of adding operational flexibility to mission timelines. For each method, a brief explanation is given along with graphs to illustrate the application of the envelopes to the power and crew resources. The benefits and costs of each method are analyzed in terms of resource utilization. In addition to the effect on individual activities, resource envelopes are analyzed at the experiment level.

Ibrahim, K. Y.↗

New options for IRI electron density in the middle ionosphere

This paper reviews the present International Reference Ionosphere (IRI) model of electron density in the middle ionosphere and explores two new options for future editions of IRI. The first of these options is a better description of the bottomside thickness parameters, and the second is an analytical representation from E- to F2-peak using LAY-functions. For this analytical representation a table of standard parameters and constraints for the four LAY-functions recommended for IRI have been established.

Bilitza, Dieter↗

Comparisons between satellite-derived gradient winds and radar-derived winds from the CIRA-86

The zonal and meridional wind contours in the 60-120 km region obtained from satellite radiance data were compared with radar-derived contours of winds obtained from the CIRA-1986 reference atmosphere. It was found that the agreement between the directly observed zonal winds and the zonal mean gradient winds from the reference atmosphere wind model was good, especially below 80 km. However, differences were found in both the Southern and the Northern Hemispheres.

Manson, A. H.↗

LAGEOS geodetic analysis-SL7.1

Laser ranging measurements to the LAGEOS satellite from 1976 through 1989 are related via geodetic and orbital theories to a variety of geodetic and geodynamic parameters. The SL7.1 analyses are explained of this data set including the estimation process for geodetic parameters such as Earth's gravitational constant (GM), those describing the Earth's elasticity properties (Love numbers), and the temporally varying geodetic parameters such as Earth's orientation (polar motion and Delta UT1) and tracking site horizontal tectonic motions. Descriptions of the reference systems, tectonic models, and adopted geodetic constants are provided; these are the framework within which the SL7.1 solution takes place. Estimates of temporal variations in non-conservative force parameters are included in these SL7.1 analyses as well as parameters describing the orbital states at monthly epochs. This information is useful in further refining models used to describe close-Earth satellite behavior. Estimates of intersite motions and individual tracking site motions computed through the network adjustment scheme are given. Tabulations of tracking site eccentricities, data summaries, estimated monthly orbital and force model parameters, polar motion, Earth rotation, and tracking station coordinate results are also provided.

Smith, D. E.↗

User's guide to resin infusion simulation program in the FORTRAN language

RTMCL is a user friendly computer code which simulates the manufacture of fabric composites by the resin infusion process. The computer code is based on the process simulation model described in reference 1. Included in the user's guide is a detailed step by step description of how to run the program and enter and modify the input data set. Sample input and output files are included along with an explanation of the results. Finally, a complete listing of the program is provided.

Weideman, Mark H.↗

A hierarchy for modeling high speed propulsion systems

General research efforts on reduced order propulsion models for control systems design are overviewed. Methods for modeling high speed propulsion systems are discussed including internal flow propulsion systems that do not contain rotating machinery, such as inlets, ramjets, and scramjets. The discussion is separated into four areas: (1) computational fluid dynamics models for the entire nonlinear system or high order nonlinear models; (2) high order linearized models derived from fundamental physics; (3) low order linear models obtained from the other high order models; and (4) low order nonlinear models (order here refers to the number of dynamic states). Included in the discussion are any special considerations based on the relevant control system designs. The methods discussed are for the quasi-one-dimensional Euler equations of gasdynamic flow. The essential nonlinear features represented are large amplitude nonlinear waves, including moving normal shocks, hammershocks, simple subsonic combustion via heat addition, temperature dependent gases, detonations, and thermal choking. The report also contains a comprehensive list of papers and theses generated by this grant.

Hartley, Tom T.↗

A comparison of refined models for flexible subassemblies

Interactions between structure response and control of large flexible space systems have challenged current modeling techniques and have prompted development of new techniques for model improvement. Due to the geometric complexity of envisioned large flexible space structures, finite element models (FEM's) will be used to predict the dynamic characteristics of structural components. It is widely accepted that these models must be experimentally 'validated' before their acceptance as the basis for final design analysis. However, predictions of modal properties (natural frequencies, mode shapes, and damping ratios) are often in error when compared to those obtained from Experimental Modal Analysis (EMA). Recent research efforts have resulted in the development of algorithmic approaches for model improvement, also referred to as system or structure identification.

Smith, Suzanne Weaver↗