Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rapid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dynamic land use implications of rapidly expanding and evolving wind power deployment

Abstract The expansion of wind power poses distinct and varied geographic challenges to a sustainable energy transition. However, current knowledge of its land use impacts and synergies is limited by reliance on static characterizations that overlook the role of turbine technology and plant design in mediating interactions with the environment. Here, we investigate how wind technology development and innovation have shaped landscape interactions with social and ecological systems within the United States and contribute to evolving land area requirements. This work assesses trends in key land use facets of wind power using a holistic set of metrics to establish an evidence base that researchers, technology designers, land use managers, and policymakers can use in envisioning how future wind-intensive energy systems may be jointly optimized for clean energy, social, and environmental objectives. Since 2000, we find dynamic land occupancy patterns and regional trends that are driven by advancing technology and geographic factors. Though most historical U.S. wind deployment has been confined to the temperate grassland biome in the nation’s interior, regional expansion has implicated diverse land use and cover types. A large percentage of the typical wind plant footprint (∼96% to > 99%) is not directly impacted by permanent physical infrastructure, allowing for multiple uses in the spaces between turbines. Surprisingly, turbines are commonly close to built structures. Moreover, rangeland and cropland have supported 93.4% of deployment, highlighting potential synergies with agricultural lands. Despite broadly decreasing capacity densities, offsetting technology improvements have stabilized power densities. Land use intensity, defined as the ratio of direct land usage to lifetime power generation of wind facilities, has also trended downwards. Although continued deployment on disturbed lands, and in close proximity to existing wind facilities and other infrastructure, could minimize the extent of impacts, ambitious decarbonization trajectories may predispose particular biomes to cumulative effects and risks from regional wind power saturation. Increased land-use and sustainability feedback in technology and plant design will be critical to sustainable management of wind power.

17 WIND ENERGY↗
DOE OSTI2025

Iterative quantum optimization of spin glass problems with rapidly oscillating transverse fields

In this work, we introduce a new iterative quantum algorithm, called Iterative Symphonic Tunneling for Satisfiability problems (IST-SAT), which solves quantum spin glass optimization problems using high-frequency oscillating transverse fields. IST-SAT operates as a sequence of iterations, in which bitstrings returned from one iteration are used to set spin-dependent phases in oscillating transverse fields in the next iteration. Over several iterations, the novel mechanism of the algorithm steers the system toward the problem ground state. We benchmark IST-SAT on sets of hard MAX-3-XORSAT problem instances with exact state vector simulation, and report polynomial speedups over Trotterized adiabatic quantum computation and the best known semi-greedy classical algorithm. When IST-SAT is seeded with a sufficiently good initial approximation, the algorithm converges to exact solution(s) in a polynomial number of iterations. Our numerical results identify a critical Hamming radius, or quality of initial approximation, where the time-to-solution crosses from exponential to polynomial scaling in problem size. This work proposes IST-SAT a new quantum algorithm, which improves upon solutions obtained from initial classical or quantum optimization algorithms. The steering mechanism we introduce through IST-SAT presents a new path toward achieving quantum advantage in optimization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Ecogenomics reveals community interactions in a long-term methanogenic bioreactor and a rapid switch to sulfate-reducing conditions

ABSTRACT The anaerobic digestion of wastes is globally important in the production of methane (CH4) as a biofuel. When sulfate is present, sulfate-reducing bacteria (SRB) are stimulated, competing with methanogens for common substrates, which decreases CH4 production and results in the formation of corrosive, odorous hydrogen sulfide gas (H2S). Here, we show that a population of SRB within a methanogenic bioreactor fed only butyrate for years immediately (within hours) responded to sulfate availability and shifted the microbial community dynamics within the bioreactor. By mapping shotgun metatranscriptomes to metagenome-assembled genomes, we shed light on the transcriptomic responses of key community members in response to increased sulfate provision. We link these short-term transcriptional responses to long-term niche partitioning using comparative metagenomic analyses. Our results suggest that sulfate provision supports a syntrophic butyrate oxidation community that disfavors poly-β-hydroxyalkanoate storage and that hydrogenotrophic SRB populations effectively exclude obligately hydrogenotrophic, but not aceticlastic, methanogens when sulfate is readily available. These findings elucidate key ecological dynamics between SRB, methanogens and syntrophic butyrate-oxidizing bacteria, which can be applied to a variety of engineered and natural systems.

St. James, Andrew R.↗
DOE OSTI2023

Versatile microbial communities rapidly assimilate ammonium hydroxide-treated plastic waste

Abstract Waste plastic presently accumulates in landfills or the environment. While natural microbial metabolisms can degrade plastic polymers, biodegradation of plastic is very slow. This study demonstrates that chemical deconstruction of polyethylene terephthalate (PET) with ammonium hydroxide can replace the rate limiting step (depolymerization) and by producing plastic-derived terephthalic acid and terephthalic acid monoamide. The deconstructed PET (DCPET) is neutralized with phosphoric acid prior to bioprocessing, resulting in a product containing biologically accessible nitrogen and phosphorus from the process reactants. Three microbial consortia obtained from compost and sediment degraded DCPET in ultrapure water and scavenged river water without addition of nutrients. No statistically significant difference was observed in growth rate compared to communities grown on DCPET in minimal culture medium. The consortia were dominated by Rhodococcus spp., Hydrogenophaga spp., and many lower abundance genera. All taxa were related to species known to degrade aromatic compounds. Microbial consortia are known to confer flexibility in processing diverse substrates. To highlight this, we also demonstrate that two microbial consortia can grow on similarly deconstructed polyesters, polyamides, and polyurethanes in water instead of medium. Our findings suggest that microbial communities may enable flexible bioprocessing of mixed plastic wastes when coupled with chemical deconstruction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Thermophilic site-specific recombination system for rapid insertion of heterologous DNA into the Clostridium thermocellum chromosome

Clostridium thermocellum is an anaerobic thermophile capable of producing ethanol and other commodity chemicals from lignocellulosic biomass. The insertion of heterologous DNA into the C. thermocellum chromosome is currently achieved via a time-consuming homologous recombination process, where a single stable insertion can take 2–4 weeks or more to construct. In this work, we developed a thermostable version of the Serine recombinase Assisted Genome Engineering (tSAGE) approach for gene insertion in C. thermocellum utilizing a site-specific recombinase from Geobacillus sp. Y412MC61, enabling quick and easy insertion of DNA into the chromosome for accelerated genetic tool screening and heterologous gene expression. Using tSAGE, chromosomal insertion of plasmid DNA occurred at a maximum transformation efficiency of 5 × 10 3 CFU/µg, which is comparable to the transformation efficiency of a replicating control plasmid in C. thermocellum. Using tSAGE, we chromosomally integrated and characterized 17 reporter genes, 15 homologous and 31 heterologous constitutive promoters of varying strengths, 4 inducible promoters, and 5 riboswitches in C. thermocellum. We also determined that a 6–7 nucleotide gap between the ribosome binding site (RBS) and the start codon is optimal for high expression by employing a library of superfolder green fluorescent protein expression constructs driven by our strongest tested promoter (P clo1313_1194 ) with different distances between the RBS and start codon. The tools developed here will aid in accelerating C. thermocellum strain engineering for producing sustainable fuels and chemicals directly from plant biomass.

Biofuels↗
DOE OSTI2020

Plot-level rapid screening for photosynthetic parameters using proximal hyperspectral imaging

Abstract Photosynthesis is currently measured using time-laborious and/or destructive methods which slows research and breeding efforts to identify crop germplasm with higher photosynthetic capacities. We present a plot-level screening tool for quantification of photosynthetic parameters and pigment contents that utilizes hyperspectral reflectance from sunlit leaf pixels collected from a plot (~2 m×2 m) in <1 min. Using field-grown Nicotiana tabacum with genetically altered photosynthetic pathways over two growing seasons (2017 and 2018), we built predictive models for eight photosynthetic parameters and pigment traits. Using partial least squares regression (PLSR) analysis of plot-level sunlit vegetative reflectance pixels from a single visible near infra-red (VNIR) (400–900 nm) hyperspectral camera, we predict maximum carboxylation rate of Rubisco (Vc,max, R2=0.79) maximum electron transport rate in given conditions (J1800, R2=0.59), maximal light-saturated photosynthesis (Pmax, R2=0.54), chlorophyll content (R2=0.87), the Chl a/b ratio (R2=0.63), carbon content (R2=0.47), and nitrogen content (R2=0.49). Model predictions did not improve when using two cameras spanning 400–1800 nm, suggesting a robust, widely applicable and more ‘cost-effective’ pipeline requiring only a single VNIR camera. The analysis pipeline and methods can be used in any cropping system with modified species-specific PLSR analysis to offer a high-throughput field phenotyping screening for germplasm with improved photosynthetic performance in field trials.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Rapid CO2 changes cause oscillations in photosynthesis that implicate PSI acceptor-side limitations

Abstract Oscillations in CO2 assimilation rate and associated fluorescence parameters have been observed alongside the triose phosphate utilization (TPU) limitation of photosynthesis for nearly 50 years. However, the mechanics of these oscillations are poorly understood. Here we utilize the recently developed dynamic assimilation techniques (DATs) for measuring the rate of CO2 assimilation to increase our understanding of what physiological condition is required to cause oscillations. We found that TPU-limiting conditions alone were insufficient, and that plants must enter TPU limitation quickly to cause oscillations. We found that ramps of CO2 caused oscillations proportional in strength to the speed of the ramp, and that ramps induce oscillations with worse outcomes than oscillations induced by step change of CO2 concentration. An initial overshoot is caused by a temporary excess of available phosphate. During the overshoot, the plant outperforms steady-state TPU and ribulose 1,5-bisphosphate regeneration limitations of photosynthesis, but cannot exceed the rubisco limitation. We performed additional optical measurements which support the role of PSI reduction and oscillations in availability of NADP+ and ATP in supporting oscillations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Progenitor and close-in circumstellar medium of type II supernova 2020fqv from high-cadence photometry and ultra-rapid UV spectroscopy

ABSTRACT We present observations of SN 2020fqv, a Virgo-cluster type II core-collapse supernova (CCSN) with a high temporal resolution light curve from the Transiting Exoplanet Survey Satellite (TESS) covering the time of explosion; ultraviolet (UV) spectroscopy from the Hubble Space Telescope (HST) starting 3.3 d post-explosion; ground-based spectroscopic observations starting 1.1 d post-explosion; along with extensive photometric observations. Massive stars have complicated mass-loss histories leading up to their death as CCSNe, creating circumstellar medium (CSM) with which the SNe interact. Observations during the first few days post-explosion can provide important information about the mass-loss rate during the late stages of stellar evolution. Model fits to the quasi-bolometric light curve of SN 2020fqv reveal 0.23 M⊙ of CSM confined within 1450 R⊙ (1014 cm) from its progenitor star. Early spectra (<4 d post-explosion), both from HST and ground-based observatories, show emission features from high-ionization metal species from the outer, optically thin part of this CSM. We find that the CSM is consistent with an eruption caused by the injection of ∼5 × 1046 erg into the stellar envelope ∼300 d pre-explosion, potentially from a nuclear burning instability at the onset of oxygen burning. Light-curve fitting, nebular spectroscopy, and pre-explosion HST imaging consistently point to a red supergiant (RSG) progenitor with $M_{\rm ZAMS}\approx 13.5\!-\!15 \, \mathrm{M}_{\odot }$, typical for SN II progenitor stars. This finding demonstrates that a typical RSG, like the progenitor of SN 2020fqv, has a complicated mass-loss history immediately before core collapse.

Tinyanont, Samaporn (ORCID:0000000214814676)↗
DOE OSTI2024

Rapid neutron star cooling triggered by dark matter

ABSTRACT We study the effect of asymmetric fermionic dark matter (DM) on the thermal evolution of neutron stars (NSs). No interaction between DM and baryonic matter is assumed, except the gravitational one. Using the two-fluid formalism, we show that DM accumulated in the core of a star pulls inwards the outer baryonic layers of the star, increasing the baryonic density in the NS core. As a result, it significantly affects the star’s thermal evolution by triggering an early onset of the direct Urca (DU) process and modifying the photon emission from the surface caused by the decrease of the radius. Thus, due to the gravitational pull of DM, the DU process becomes kinematically allowed for stars with lower masses. Based on these results, we discuss the importance of NS observations at different distances from the Galactic Centre. Since the DM distribution peaks towards the Galactic Centre, NSs in this region are expected to contain higher DM fractions that could lead to a different cooling behavior.

Ávila, Afonso (ORCID:000000028880039X)↗
DOE OSTI2021

Rapid prototyping of arbitrary 2D and 3D wireframe DNA origami

Wireframe DNA origami assemblies can now be programmed automatically from the top-down using simple wireframe target geometries, or meshes, in 2D and 3D, using either rigid, six-helix bundle (6HB) or more compliant, two-helix bundle (DX) edges. While these assemblies have numerous applications in nanoscale materials fabrication due to their nanoscale spatial addressability and high degree of customization, no easy-to-use graphical user interface software yet exists to deploy these algorithmic approaches within a single, standalone interface. Further, top-down sequence design of 3D DX-based objects previously enabled by DAEDALUS was limited to discrete edge lengths and uniform vertex angles, limiting the scope of objects that can be designed. Here, we introduce the open-source software package ATHENA with a graphical user interface that automatically renders single-stranded DNA scaffold routing and staple strand sequences for any target wireframe DNA origami using DX or 6HB edges, including irregular, asymmetric DX-based polyhedra with variable edge lengths and vertices demonstrated experimentally, which significantly expands the set of possible 3D DNA-based assemblies that can be designed. ATHENA also enables external editing of sequences using caDNAno, demonstrated using asymmetric nanoscale positioning of gold nanoparticles, as well as providing atomic-level models for molecular dynamics, coarse-grained dynamics with oxDNA, and other computational chemistry simulation approaches.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Parity-Doubled Nucleons Can Rapidly Cool Neutron Stars

In confined hadronic matter, the spontaneous breaking and restoration of chiral symmetry can be described by considering nucleons, 𝑁 + ⁡(939), and excited states of opposite parity, 𝑁 − ⁡(1535). In a cold, dense hadronic phase where chiral symmetry remains spontaneously broken, direct Urca decay processes involving the 𝑁 − are possible, e.g., 𝑁 − → 𝑁 + + 𝑒 − + $\bar{𝜈}_𝑒$. Here, we show that at low temperature and moderate densities, because the 𝑁 − are much heavier than the 𝑁 + , such cooling dominates over standard 𝑁 + direct Urca processes. This provides a strong astrophysical signature of the pattern of chiral symmetry restoration in neutron stars.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Rapid thermal emittance and quantum efficiency mapping of a cesium telluride cathode in an rf photoinjector using multiple laser beamlets

Thermal emittance and quantum efficiency (QE) are key figures of merit of photocathodes, and their uniformity is critical to high-performance photoinjectors. Several QE mapping technologies have been successfully developed; however, there is still a dearth of information on thermal emittance maps. This is because of the extremely time-consuming procedure to gather measurements by scanning a small beam across the cathode with fine steps. To simplify the mapping procedure and to reduce the time required to take measurements, we propose a new method that requires only a single scan of the solenoid current to simultaneously obtain thermal emittance and QE distribution by using a pattern beam with multiple beamlets. In this paper, its feasibility has been confirmed by both beam dynamics simulation and theoretical analysis. The method has been successfully demonstrated in a proof-of-principle experiment using an L-band radio-frequency photoinjector with a cesium telluride cathode. In the experiment, seven beamlets were generated from a microlens array system and their corresponding thermal emittance and QE varied from 0.93 to 1.14 mu m/nun and from 4.6% to 8.7%, respectively. We also discuss the limitations and future improvements of the method in this paper.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Observation of Reactor Antineutrinos with a Rapidly Deployable Surface-Level Detector

We deploy a small 80 kg antineutrino detector, called MiniCHANDLER, based on a solid plastic scintillator, for nearly three months at a distance of 25 m from a 2.9 GW thermal-power-reactor core at the North Anna Nuclear Generating Station. We report the detection of an antineutrino signal resulting from inverse beta decay at 5.5σ significance with no overburden and minimal shielding. This result also demonstrates that three-dimensional segmentation can be used to significantly improve the signal-to-noise ratio, in this case by a factor of 4. Finally, in addition, this measurement represents an observation of a positron spectrum in a small surface-deployed detector; this observation of reactor antineutrinos is achieved with a mobile neutrino detector mounted in an ordinary small trailer.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Measurement of ψ ( 2 S ) nuclear modification at backward and forward rapidity in p + p , p + Al , and p + Au collisions at s N N = 200 GeV

Suppression of the J/ψ nuclear-modification factor has been seen as a trademark signature of final-state effects in large collision systems for decades. In small systems, the nuclear modification was attributed to cold-nuclear-matter effects until the observation of strong differential suppression of the ψ(2S) state in p+A and d+A collisions suggested the presence of final-state effects. Results of J/ψ and ψ(2S) measurements in the dimuon decay channel are presented here for p+p, p+Al, and p+Au collision systems at $\sqrt{^{S}NN}$ = 200 GeV. The results are predominantly shown in the form of the nuclear-modification factor, R pA , the ratio of the ψ(2S) invariant yield per nucleon-nucleon collision in collisions of proton on target nucleus to that in p+p collisions. Finally, measurements of the J/ψ and ψ(2S) nuclear-modification factor are compared with shadowing and transport-model predictions, as well as to complementary measurements at Large-Hadron-Collider energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗