Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantitative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Efficiency of Charge-Transfer Doping in Organic Semiconductors Probed with Quantitative Microwave and Direct-Current Conductance

Although molecular charge-transfer doping is widely used to manipulate carrier density in organic semiconductors, only a small fraction of charge carriers typically escape the Coulomb potential of dopant counterions to contribute to electrical conductivity. Here, we utilize microwave and direct-current (DC) measurements of electrical conductivity to demonstrate that a high percentage of charge carriers in redox-doped semiconducting single-walled carbon nanotube (s-SWCNT) networks is delocalized as a free carrier density in the p-electron system (estimated as >46% at high doping densities). The microwave and four-point probe conductivities of hole-doped s-SWCNT films quantitatively match over almost 4 orders of magnitude in conductance, indicating that both measurements are dominated by the same population of delocalized carriers. We address the relevance of this surprising one-to-one correspondence by discussing the degree to which local environmental parameters (e.g., tube-tube junctions, Coulombic stabilization, and local bonding environment) may impact the relative magnitudes of each transport measurement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Identification of Salmonella Typhimurium deubiquitinase SseL substrates by immunoaffinity enrichment and quantitative proteomic analysis

Ubiquitination is a key protein post-translational modification that regulates many important cellular pathways and whose levels are regulated by equilibrium between the activities of ubiquitin ligases and deubiquitinases. Here we present a method to identify specific deubiquitinase substrates based on treatment of cell lysates with recombinant enzymes, immunoaffinity purification and global quantitative proteomic analysis. As model system to identify substrates, we used a virulence-related deubiquitinase secreted by Salmonella enterica serovar Typhimurium into the host cells, SseL. By using this approach two SseL substrates were identified in RAW 264.7 murine macrophage-like cell line, S100A6 and het-erogeneous nuclear ribonuclear protein K, in addition to the previously reported K63-linked ubiquitin chains. These substrates were further validated by a combination of enzymatic and binding assays. Finally, this method can be used for the systematic identification of substrates of deubiquitinases from other organisms and applied to study their functions in physiology and disease.

59 BASIC BIOLOGICAL SCIENCES↗

A Multiplexed Quantitative Analysis of Germline Single Amino Acid Variants by Targeted Proteomics in Nondepleted Human Plasma

Single amino acid variants (SAAVs) in protein sequences are often a direct result of single-nucleotide polymorphisms (SNPs). Certain germline SAAVs have shown biological relevance in different disease conditions but lack precise quantification in circulation, which could hinder functional investigations and progress in biomarker development. Here, we have developed a multiplexed liquid chromatography-selected reaction monitoring (LC-SRM) assay that monitors 5 wild-type and variant peptide pairs (Complement Factor B: CFB-R32Q/R32W, Clusterin: CLU-N317H, Fetuin B: FETUB-K360R, and Kininogen: KNG1-L212P) in nondepleted human plasma. The assay was optimized for imprecision, linearity, stability, and calibration assessments with CVs of under 20%. The wild-type and variant peptide pairs were characterized in a set of healthy individual plasma samples. These target identifications were also validated by SNP genotyping with more than 99% accuracy. For all protein targets, we observed significantly lower concentrations of WT species in the presence variant peptides. In CFB, the concentration of R32Q was significantly lower than its counterpart R32W variant and WT species. Furthermore, our results distinguished phenotypes of homozygosity and heterozygosity of the SAAV presence through direct concentration level characterization. These findings provide some insights into how SAAVs affect quantitative assessments of target peptides. The assay demonstrates a platform for proteogenomic analyses with potential applications in both research and clinical settings.

genetics↗

Automated “Cells-To-Peptides” Sample Preparation Workflow for High-Throughput, Quantitative Proteomic Assays of Microbes

Mass spectrometry-based quantitative proteomic analysis has proven valuable for clinical and biotechnology-related research and development. Improvements in sensitivity, resolution, and robustness of mass analyzers have also added value. However, manual sample preparation protocols are often a bottleneck for sample throughput and can lead to poor reproducibility, especially for applications where thousands of samples per month must be analyzed. To alleviate these issues, we developed a “cells-to-peptides” automated workflow for Gram-negative bacteria and fungi that includes cell lysis, protein precipitation, resuspension, quantification, normalization, and tryptic digestion. The workflow takes 2 h to process 96 samples from cell pellets to the initiation of the tryptic digestion step and can process 384 samples in parallel. We measured the efficiency of protein extraction from various amounts of cell biomass and optimized the process for standard liquid chromatography–mass spectrometry systems. The automated workflow was tested by preparing 96 Escherichia coli samples and quantifying over 600 peptides that resulted in a median coefficient of variation of 15.8%. Similar technical variance was observed for three other organisms as measured by highly multiplexed LC-MRM–MS acquisition methods. These results show that this automated sample preparation workflow provides robust, reproducible proteomic samples for high-throughput applications.

59 BASIC BIOLOGICAL SCIENCES↗

Quantitative Attachment of Bimetal Combinations of Transition-Metal Ions to the Surface of TiO 2 Nanorods

Here we report the sequential, quantitative loading of transition-metal ions (Cr 3+ , Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ , and Cu 2+ ) onto the surface of rod-shaped anatase TiO 2 nanocrystals in bimetallic combinations ( 6 C 2 = 15) to form M,M'-TiO 2 nanocrystals. The materials were characterized with transmission electron microscopy (TEM), powder X-ray diffraction (XRD), elemental analysis, X-ray photoelectron spectroscopy (XPS), and UV–visible spectroscopy. TEM and XRD data indicate that the sequential adsorption of metal ions occurs with the retention of the phase and morphology of the nanocrystal. Atomistic models of the M,M'-TiO 2 nanocrystals were optimized with density functional theory calculations. Calculated UV–visible absorption spectra and partial charge density maps of the donor and acceptor states for the electronic transitions indicate the importance of metal-to-metal charge transfer (MMCT) processes.

36 MATERIALS SCIENCE↗

Quantitatively in Situ Imaging Silver Nanowire Hollowing Kinetics

We report the in-situ investigation of the morphological evolution of silver nanowires to hollow silver oxide nanotubes using transmission x-ray microscopy (TXM). Complex silver diffusion kinetics and hollowing process via the Kirkendall effect have been captured in real time. Further quantitative x-ray absorption analysis reveals the difference between the longitudinal and radial diffusions. In conclusion, the diffusion coefficient of silver in its oxide nanoshell is, for the first time, calculated to be 1.2 × 10 -13 cm 2 /s from the geometrical parameters extracted from the TXM images.

36 MATERIALS SCIENCE↗

Quantitative Effects of Disorder on Chemically Modified Amorphous Carbon Electrodes

Real materials are disordered. This disorder influences the properties of these materials and the chemical processes that occur at their interfaces. Gaining a molecular-level understanding of the underlying physical manifestations caused by disordered materials is crucial to unraveling and ultimately controlling the efficiency and performance of these materials in a range of energy-related devices. This understanding necessitates measurement techniques through which disorder can be detected, quantified, and monitored. However, such quantitative measurements are notoriously difficult, as effects often average out in ensemble measurements. In this work, we describe how a combination of electrochemical and spatially resolved surface spectroscopy measurements illuminate a molecular-level picture of disorder in materials. Using amorphous carbon as an intrinsically disordered material, we covalently attached a monolayer of ferrocene. Interfacial electron transfer across the amorphous carbon–ferrocene interface is highly sensitive to disruptions of order. Here, by systematically varying linker properties and surface loadings, the influence of lateral interactions between nonuniformly distributed ferrocene headgroups on ensemble electrochemical measurements is demonstrated. Electrochemical and imaging data collectively indicate that conformational flexibility of the ferrocene moieties provides a mechanism to elude repulsive and unbalanced lateral interactions, while rigid linkages provide direct information about the underlying disorder of the material. This study is the first of its kind to quantify and visualize molecular disorder and heterogeneity with an experimental model accessed through ensemble measurements.

36 MATERIALS SCIENCE↗

Quantitative Analysis of Origin of Lithium Inventory Loss and Interface Evolution over Extended Fast Charge Aging in Li Ion Batteries

During the extreme fast charging (XFC) of lithium-ion batteries, lithium inventory loss (LLI) and reaction mechanisms at the anode/electrolyte interface are crucial factors in performance and safety. Determining the causes of LLI and quantifying them remain an essential challenge. We present mechanistic research on the evolution and interactions of aging mechanisms at the anode/electrolyte interface. We used NMC 532 /graphite pouch cells charged at rates of 1, 6, and 9 C up to 1000 cycles for our investigation. The cell components were characterized after cycling using electrochemical measurements, inductively coupled plasma optical emission spectroscopy, 7 Li solid-state nuclear magnetic resonance spectroscopy, and high-performance liquid chromatography/mass spectrometry. The results indicate that cells charged at 1 C exhibit no Li plating, and the increase of SEI thickness is the dominant source of the Li loss. In contrast, Li loss in cells charged at 9 C is related to the formation of the metallic plating layers (42%) the SEI layer (38.1%) and irreversible intercalation into the bulk graphite (19%). XPS analysis suggests that the charging rate has little influence on the evolution of SEI composition. The interactions between competing aging mechanisms were evaluated by a correlation analysis. In conclusion, the quantitative method established in this work provides a comprehensive analytical framework for understanding the synergistic coupling of anodic degradation mechanisms, forecasting SEI failure scenarios, and assessing the XFC lithium-ion battery capacity fade.

25 ENERGY STORAGE↗

Quantitative Analysis of Electrochemical and Electrode Stability with Low Self-Discharge Lithium-Sulfur Batteries

The viability of employing high-capacity sulfur cathodes in building high-energy-density lithium-sulfur batteries is limited by rapid self-discharge, short shelf life, and severe structural degradation during cell resting (static instability). Unfortunately, the static instability has largely been ignored in the literature. Here, we present in this letter a long-term self-discharge study by quantitatively analyzing the control lithium-sulfur batteries with a conventional cathode configuration, which provides meaningful insights into the cathode failure mechanisms during resting. Utilizing the understanding obtained with the control cells, we design and present low self-discharge (LSD) lithium-sulfur batteries for investigating the long-term self-discharge effect and electrode stability.

25 ENERGY STORAGE↗

Quantitative Determination of Metal Ion Adsorption on Cellulose Nanocrystals Surfaces

Nanocellulose is a bio-based material that holds significant potential in the field of water purification. Of particular interest is their potential use as a key sorbent material for the removal of metal ions from solution. However, the structure of metal ions adsorbed onto cellulose surfaces is not well understood. The focus of this work is to determine quantitatively the three-dimensional distribution of metal ions of different valencies surrounding negatively charged carboxylate functionalized cellulose nanocrystals (CNCs) using anomalous small-angle X-ray scattering (ASAXS). These distributions can affect the water and ionic permeability in these materials. The data show that increasing the carboxylate density on the surface of the CNCs from 740 to 1100 mmol/kg changed the nature of the structure of the adsorbed ions from a monolayer into a multilayer structure. The monolayer was modeled as a Stern layer around the CNC nanoparticles, whereas the multilayer structure was modeled as a diffuse layer on top of the Stern layer around the nanoparticles. Within the Stern layer, the maximum ion density increases from 1680 to 4350 mmol of Rb + /(kg of CNC) with the increase in the carboxylate density on the surface of the nanoparticles. Additionally, the data show that CNCs can leverage multiple mechanisms, such as electrostatic attraction and the chaotropic effect, to adsorb ions of different valencies. By understanding the spatial organization of the adsorbed metal ions, the design of cellulose-based sorbents can be further optimized to improve the uptake capacity and selectivity in separation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative Profiling of Protein S-Glutathionylation Reveals Redox-Dependent Regulation of Macrophage Function During Nanoparticle-Induced Oxidative Stress

Engineered nanoparticles (ENPs) are emerging functional materials increasingly utilized for commercial and medical applications. Due to the potential hazard effects of ENPs to human health, it is significant to assess and understand the underlying mechanisms of nanotoxicity. Here, we investigate protein S-glutathionylation (SSG) as an underlying regulatory mechanism for ENP-induced oxidative stress in macrophages by applying a recently developed quantitative redox proteomics approach for site-specific measurements of SSG. Three high-volume production ENPs (SiO 2 , Fe 3 O 4 and CoO) were selected as representative ENPs with low, moderate, and high reactive oxygen species (ROS) activity, respectively. Among these nanoparticles, we observe that CoO led to the most significant dose-dependent oxidative stress and increase of protein SSG modifications in macrophages. Our site-specific SSG changes highlighted a broad set of redox sensitive proteins and their specific Cys residues potentially implicated in stress response. Functional analysis revealed that the most significantly enriched functional categories for SSG-modified proteins were stress response, cellular structure change, and cell death or survival. Moreover, ENPs-induce oxidative stress levels (CoO > Fe 3 O 4 > SiO 2 ) were found to correlate well with the levels of impairment of macrophage phagocytic activity and the overall degrees of increases in SSG. RNA silencing knockdown experiment of glutaredoxin 1 (Grx1) also led to a decreased phagocytic activity in macrophages, which suggested a regulatory role of SSG in phagocytosis. Together, the results provided valuable insights of protein SSG as a potential regulatory mechanism in response to nanomaterial-induced oxidative stress and immunity dysfunction.

60 APPLIED LIFE SCIENCES↗

Quantitative Dissection of Agrobacterium Virulence to Generate a Synthetic Ti Plasmid

Agrobacterium is not only a costly plant pathogen but is also an essential tool for plant transformation. Though Agrobacterium-mediated transformation (AMT) has been heavily studied, its polygenic nature and complex transcriptional regulation make identification of the genetic basis of transformational efficiency difficult through traditional genetic and bioinformatic approaches. Here, we use a bottom-up synthetic approach to systematically engineer the tumor-inducing plasmid (pTi), wherein the majority of virulence machinery is encoded. Using a validated toolkit to control Agrobacterium gene expression in planta, we perform a quantitative dissection of AMT to investigate the contributions of critical vir-genes at different expression levels. We construct a synthetic pTi capable of transient plant and stable fungal transformation and characterize bottlenecks and solutions for complex polygenic synthetic pTi designs. Our reductionist approach demonstrates how bottom-up engineering can be used to dissect and elucidate the genetic underpinnings of complex biological traits, laying the foundation for future engineering to establish full synthetic control over the critical process of AMT.

Agrobacterium-mediated transformation↗

Quantitative assessment of electrostatic embedding in Density Functional Theory calculations of biomolecular systems

We evaluate the accuracy of density functional theory quantum calculations of biomolecular subsystems using a simple electrostatic embedding scheme. Our scheme is based on dividing the system of interest into a primary and secondary subsystem. A finite difference discretization of the Kohn-Sham equations is used for the primary subsystem, while its electrostatic environment is modeled with a simple one-electron potential. Force-field atomic partial charges are used to generate smeared Gaussian charge densities and to model the secondary subsystem. We illustrate the utility of this approach with calculations of truncated dipeptide chains. We analyze quantitatively the accuracy of this approach by calculating atomic forces and comparing results with fullQMcalculations. The impact of the choice made in terminating dangling bonds at the frontier of the QM region is also investigated.

59 BASIC BIOLOGICAL SCIENCES↗

Quantitative evaluation of minerals in lignites and intraseam sediments from the Achlada Basin, Northern Greece

Seven core samples (five lignite samples and two intraseam nonlignite rock samples) from the Achlada open-cut mine in northern Greece were characterized by X-ray diffraction (XRD) and X-ray fluorescence (XRF) techniques. Quantitative evaluation of the mineral phases in each sample was made from the powder X-ray diffractograms using Siroquant commercial interpretation software, which is based on Rietveld principles. The main minerals in the low-temperature ash (LTA) ash of the lignites are kaolinite and illite, with bassanite and quartz in minor proportions. The nonlignite rock samples mainly consist of illite, mica (2M1), and kaolinite (poorly ordered), along with quartz, chlorite (ferroan), feldspar (albite), rutile, and dolomite. Oriented-aggregate XRD study further shows the presence of smectite, and interstratified illite/smectite (I/S), in the clay fractions of the lignite and rock samples, with the mineral matter of the lignites being richer in kaolinite, smectite, and I/S than in mineral matter of the nonlignite materials. The differences in mineralogy between the lignite and the rock materials probably reflect selective concentration of minerals in the original peat during deposition, combined with authigenic precipitation of minerals such as kaolinite in the peat deposit. Inferred chemical analyses derived from the XRD data show reasonably good correlations with chemical data obtained by direct ash analysis, especially if the smectite and I/S are taken into account. This provides a link between mineralogical and chemical studies that may be valuable in evaluating the behavior of the lignite under different utilization conditions. 27 refs., 4 figs., 6 tabs.

01 COAL, LIGNITE, AND PEAT↗

Oriented single-crystal nuclear resonance vibrational spectroscopy of [Fe(TPP)(MI)(NO)] : quantitative sssessment of the trans effect of NO.

This paper presents oriented single-crystal Nuclear Resonance Vibrational Spectroscopy (NRVS) data for the six-coordinate (6C) ferrous heme-nitrosyl model complex [{sup 57}Fe(TPP)(MI)(NO)] (1; TPP{sup 2-} = tetraphenylporphyrin dianion; MI = 1-methylimidazole). The availability of these data enables for the first time the detailed simulation of the complete NRVS data, including the porphyrin-based vibrations, of a 6C ferrous heme-nitrosyl, using our quantum chemistry centered normal coordinate analysis (QCC-NCA). Importantly, the Fe-NO stretch is split by interaction with a porphyrin-based vibration into two features, observed at 437 and 472 cm{sup -1}. The 437 cm{sup -1} feature is strongly out-of-plane (oop) polarized and shows a {sup 15}N{sup 18}O isotope shift of 8 cm{sup -1} and is therefore assigned to v(Fe-NO). The admixture of Fe-N-O bending character is small. Main contributions to the Fe-N-O bend are observed in the 520-580 cm{sup -1} region, distributed over a number of in-plane (ip) polarized porphyrin-based vibrations. The main component, assigned to {delta}{sub ip}(Fe-N-O), is identified with the feature at 563 cm{sup -1}. The Fe-N-O bend also shows strong mixing with the Fe-NO stretching internal coordinate, as evidenced by the oop NRVS intensity in the 520-580 cm{sup -1} region. Very accurate normal mode descriptions of ?(Fe-NO) and {delta}{sub ip}(Fe-N-O) have been obtained in this study. These results contradict previous interpretations of the vibrational spectra of 6C ferrous heme-nitrosyls where the higher energy feature at {approx}550 cm{sup -1} had usually been associated with v(Fe-NO). Furthermore, these results provide key insight into NO binding to ferrous heme active sites in globins and other heme proteins, in particular with respect to (a) the effect of hydrogen bonding to the coordinated NO and (b) changes in heme dynamics upon NO coordination. [Fe(TPP)(MI)(NO)] constitutes an excellent model system for ferrous NO adducts of myoglobin (Mb) mutants where the distal histidine (His64) has been removed. Comparison to the reported vibrational data for wild-type (wt) Mb-NO then shows that the effect of H bonding to the coordinated NO is weak and mostly leads to a polarization of the {pi}/{pi}* orbitals of bound NO. In addition, the observation that {delta}{sub ip}(Fe-N-O) does not correlate well with ?(N-O) can be traced back to the very mixed nature of this mode. The Fe-N(imidazole) stretching frequency is observed at 149 cm{sup -1} in [Fe(TPP)(MI)(NO)], and spectral changes upon NO binding to five-coordinate ferrous heme active sites are discussed. The obtained high-quality force constants for the Fe-NO and N-O bonds of 2.57 and 11.55 mdyn/{angstrom} can further be compared to those of corresponding 5C species, which allows for a quantitative analysis of the {sigma} trans interaction between the proximal imidazole (His) ligand and NO. This is key for the activation of the NO sensor soluble guanylate cyclase. Finally, DFT methods are calibrated against the experimentally determined vibrational properties of the Fe-N-O subunit in 1. DFT is in fact incapable of reproducing the vibrational energies and normal mode descriptions of the Fe-N-O unit well, and thus, DFT-based predictions of changes in vibrational properties upon heme modification or other perturbations of these 6C complexes have to be treated with caution.

08 HYDROGEN↗

Room-Temperature Quantitative Quantum Sensing of Lithium Ions with a Radical-Embedded Metal–Organic Framework

Recent advancements in quantum sensing have sparked transformative detection technologies with high sensitivity, precision, and spatial resolution. Owing to their atomic-level tunability, molecular qubits and ensembles thereof are promising candidates for sensing chemical analytes. Here, in this study, we show quantum sensing of lithium ions in solution at room temperature with an ensemble of organic radicals integrated in a microporous metal–organic framework (MOF). The organic radicals exhibit electron spin coherence and microwave addressability at room temperature, thus behaving as qubits. The high surface area of the MOF promotes accessibility of the guest analytes to the organic qubits, enabling unambiguous identification of lithium ions and quantitative measurement of their concentration through relaxometric and hyperfine spectroscopic methods based on electron paramagnetic resonance (EPR) spectroscopy. The sensing principle presented in this work is applicable to other metal ions with nonzero nuclear spin.

36 MATERIALS SCIENCE↗

Quantitative Analysis of the Reduction Kinetics Responsible for the One-Pot Synthesis of Pd–Pt Bimetallic Nanocrystals with Different Structures

We report a quantitative understanding of the reduction kinetics responsible for the formation of Pd–Pt bimetallic nanocrystals with two distinctive structures. The syntheses involve the use of KBr to manipulate the reaction kinetics by influencing the redox potentials of metal precursor ions via ligand exchange. In the absence of KBr, the ratio between the initial reduction rates of PdCl 4 2– and PtCl 4 2– was about 10.0, leading to the formation of Pd@Pt octahedra with a core–shell structure. In the presence of 63 mM KBr, the products became Pd–Pt alloy nanocrystals. In this case, the ratio between the initial reduction rates of the two precursors dropped to 2.4 because of ligand exchange and, thus, the formation of PdBr 4 2– and PtBr 4 2– . The alloy nanocrystals took a cubic shape owing to the selective capping effect of Br – ions toward the {100} facets. Relative to the alloy nanocubes, the Pd@Pt core–shell octahedra showed substantial enhancement in both catalytic activity and durability toward the oxygen reduction reaction (ORR). Specifically, the specific (1.51 mA cm –2 ) and mass (1.05 A mg –1 Pt) activities of the core–shell octahedra were enhanced by about four- and three-fold relative to the alloy nanocubes (0.39 mA cm –2 and 0.34 A mg –1 Pt, respectively). Even after 20000 cycles of accelerated durability test, the core–shell octahedra still exhibited a mass activity of 0.68 A mg –1 Pt, twice that of a pristine commercial Pt/C catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Quantitative Examination of Catalyst Component Impacts on Hydrogen Adsorption and Spillover

Hydrogen spillover is a widely recognized but poorly understood surface phenomenon. We coupled volumetric chemisorption with Fourier transform infrared spectroscopy, thermogravimetric analysis, and acid–base titrations to quantify the roles of metal (Pt, Au) and support chemistry (anatase, rutile, P25 titania) on spillover. We show that metal identity has little to no impact on the amount of spillover hydrogen. Spillover pressure dependence is essentially the same on Au/TiO 2 and Pt/TiO 2 , indicating H 2 adsorption is equilibrated across both the metal and support. Conversely, spillover is highly sensitive to support surface chemistry, as rutile TiO 2 stabilizes ∼5× more surface hydrogen than anatase TiO 2 . This change is due to a combination of factors, including the rutile surface’s higher proton affinity, stabilized surface electronic states, and larger surface entropy. This work highlights the utility of Au/MO x catalysts as control materials for spillover, as they enable quantitative evaluation of H 2 adsorption on active metals and spillover onto the support.

Adsorption↗