Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “program verification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Integrating MBSE into Ongoing Projects: Requirements Validation and Test Planning for the ISS SAFER

The International Space Station (ISS) Simplified Aid for Extra Vehicular Activity (EVA) Rescue (SAFER) is the spacewalking astronaut's final safety measure against separating from the ISS and being unable to return safely. Since the late 1990s, the SAFER has been a standard element of the spacewalking astronaut's equipment. The ISS SAFER project was chartered to develop a new block of SAFER units using a highly similar design to the legacy SAFER (known as the USA SAFER). An on-orbit test module was also included in the project to enable periodic maintenance/propulsion system checkout on the ISS SAFER. On the ISS SAFER project, model-based systems engineering (MBSE) was not the initial systems engineering (SE) approach, given the volume of heritage systems engineering and integration (SE&I) products. The initial emphasis was ensuring traceability to ISS program standards as well as to legacy USA SAFER requirements. The requirements management capabilities of the Cradle systems engineering tool were to be utilized to that end. During development, however, MBSE approaches were applied selectively to address specific challenges in requirements validation and test and verification (T&V) planning, which provided measurable efficiencies to the project. From an MBSE perspective, ISS SAFER development presented a challenge and an opportunity. Addressing the challenge first, the project was tasked to use the original USA SAFER operational and design requirements baseline, with a number of additional ISS program requirements to address evolving certification expectations for systems operating on the ISS. Additionally, a need to redesign the ISS SAFER avionics architecture resulted in a set of changes to the design requirements baseline. Finally, the project added an entirely new functionality for on-orbit maintenance. After initial requirements integration, the system requirements count was approaching 1000, which represented a growth of 4x over the original USA SAFER system. This presented the challenge - How to confirm that this new set of requirements set would result in the creation of the desired capability.

Anderson, Herbert A.↗
NASA NTRS1986

Spacecraft 2000

The Spacecraft 2000 program has been conceived by NASA with the objective to maintain the U.S. in a strong technical position in the space arena. The program is to involve a cooperative NASA/industry effort with long-range technology development aims. The technology areas addressed are related to spacecraft power, spacecraft energy storage, power management and distribution, autonomous operation-control, onboard systems integration, secondary propulsion, communications technologies, and systems/subsystems technology verification. Aspects of Spacecraft 2000 interactions with industry are discussed, taking into account visitations of NASA personnel to selected industrial concerns, most critical concerns (general), major technical concern, technology drivers for future spacecraft power systems, technology considerations for secondary propulsion, and questions of commercialization. Plans related to a Spacecraft 2000 program formulation are also considered.

Faymon, K. A.↗
NASA NTRS1991

Experimental verification of nanometer level optical pathlength control on a flexible structure

This paper describes an experimental facility being developed for demonstration and validation of control concepts arising out of NASA's Control Structure Interaction program. The facility is meant to be a ground testbed with relevance to a broad class of precision optical space systems. The objective of the experimental program is to investigate a multilayer control approach to the maintenance of nanometer-level optical pathlength stability in the presence of external disturbances and multiple structural resonances. The facility is designed to explore the effect of applying, separately and in combinations, structural vibration suppression, vibration isolation, and active optical articulation. This paper describes the testbed facility, the structure, optics, sensors, actuators, and real-time computer and program development environment. Initial optical articulation experimental results are presented.

O'Neal, Michael↗
NASA NTRS1975

Cluster man/system design requirements and verification

Discussion of the procedures employed for determining the man/system requirements that guided Skylab design, and review of the techniques used for implementing the man/system design verification. The foremost lesson learned from the design need anticipation and design verification experience is the necessity to allow for human capabilities of in-flight maintenance and repair. It is now known that the entire program was salvaged by a series of unplanned maintenance and repair events which were implemented in spite of poor design provisions for maintenance.

Orbital workers↗
NASA NTRS1988

Evidence flow graph methods for validation and verification of expert systems

This final report describes the results of an investigation into the use of evidence flow graph techniques for performing validation and verification of expert systems. This was approached by developing a translator to convert horn-clause rule bases into evidence flow graphs, a simulation program, and methods of analysis. These tools were then applied to a simple rule base which contained errors. It was found that the method was capable of identifying a variety of problems, for example that the order of presentation of input data or small changes in critical parameters could effect the output from a set of rules.

Becker, Lee A.↗
NASA NTRS1987

Parallel processing for digital picture comparison

In picture processing an important problem is to identify two digital pictures of the same scene taken under different lighting conditions. This kind of problem can be found in remote sensing, satellite signal processing and the related areas. The identification can be done by transforming the gray levels so that the gray level histograms of the two pictures are closely matched. The transformation problem can be solved by using the packing method. Researchers propose a VLSI architecture consisting of m x n processing elements with extensive parallel and pipelining computation capabilities to speed up the transformation with the time complexity 0(max(m,n)), where m and n are the numbers of the gray levels of the input picture and the reference picture respectively. If using uniprocessor and a dynamic programming algorithm, the time complexity will be 0(m(3)xn). The algorithm partition problem, as an important issue in VLSI design, is discussed. Verification of the proposed architecture is also given.

Cheng, H. D.↗
NASA NTRS1990

Microgravity research at LeRC

The NASA Lewis Research Center is conducting a wide variety of ground-based science and microgravity flight experiments in the disciplines of fluid physics and transport phenomena, combustion science, and materials science. Extensive use is made of low-gravity ground-based facilities such as drop towers and a Learjet aircraft, as well as extensive normal-gravity laboratories. The ground-based facilities are utilized to execute science programs, perform precursor tests to define space experiment science requirements and conceptual designs, and also to perform tests for space experiment technology development and verification. Finally, flight hardware is designed, developed and flown on the Space Shuttle.

Kohl, Fred J.↗
NASA NTRS1992

Offloading techniques for large deployable space structures

The validation and verification of large deployable space structures are continual challenges which face the integration and test engineer today. Spar Aerospace Limited has worked on various programs in which such structure validation was required and faces similar tasks in the future. This testing is reported and the different offloading and deployment methods which were used, as well as the proposed methods which will be used on future programs, are described. Past programs discussed include the Olympus solar array ambient and thermal vacuum deployments, and the Anik-E array and reflector deployments. The proposed MSAT reflector and boom ambient deployment tests, as well as the proposed RADARSAT Synthetic Aperture Radar (SAR) ambient and thermal vacuum deployment tests will also be presented. A series of tests relating to various component parts of the offloading equipment systems was required. These tests included the characterization and understanding of linear bearings and large (180 in-lbf) constant force spring motors in a thermal vacuum environment, and the results from these tests are presented.

Caravaggio, Levino↗
NASA NTRS2013

FPGA Flash Memory High Speed Data Acquisition

The purpose of this research is to design and implement a VHDL ONFI Controller module for a Modular Instrumentation System. The goal of the Modular Instrumentation System will be to have a low power device that will store data and send the data at a low speed to a processor. The benefit of such a system will give an advantage over other purchased binary IP due to the capability of allowing NASA to re-use and modify the memory controller module. To accomplish the performance criteria of a low power system, an in house auxiliary board (Flash/ADC board), FPGA development kit, debug board, and modular instrumentation board will be jointly used for the data acquisition. The Flash/ADC board contains four, 1 MSPS, input channel signals and an Open NAND Flash memory module with an analog to digital converter. The ADC, data bits, and control line signals from the board are sent to an Microsemi/Actel FPGA development kit for VHDL programming of the flash memory WRITE, READ, READ STATUS, ERASE, and RESET operation waveforms using Libero software. The debug board will be used for verification of the analog input signal and be able to communicate via serial interface with the module instrumentation. The scope of the new controller module was to find and develop an ONFI controller with the debug board layout designed and completed for manufacture. Successful flash memory operation waveform test routines were completed, simulated, and tested to work on the FPGA board. Through connection of the Flash/ADC board with the FPGA, it was found that the device specifications were not being meet with Vdd reaching half of its voltage. Further testing showed that it was the manufactured Flash/ADC board that contained a misalignment with the ONFI memory module traces. The errors proved to be too great to fix in the time limit set for the project.

Gonzalez, April↗
NASA NTRS2018

Design Limit Loads and Verification Approach for the TESS Observatory

The Transiting Exoplanet Survey Satellite (TESS) is a NASA Explorer mission. The TESS Observatory is scheduled to launch on Falcon 9 in April 2018. This presentation covers the process used to define and update design limit loads for the observatory, instrument, and components throughout the life of the program. The limit loads that drove the need for a SoftRide isolation system are highlighted. The testing performed to qualify the observatory for launch loads at the instrument and observatory level is also detailed. In addition, exchanges with the launch vehicle provider in terms of loads predictions and hardware for test are discussed along with the associated issues encountered and lessons learned. The loads development and verification success on TESS was a team effort. Orbital ATK is the spacecraft provider, NASA GSFC provides project management and technical oversight, the instrument is managed by MIT Kavli Institute and the instrument cameras are built and tested by MIT Lincoln Laboratory. Since the instrument was designed in parallel with the spacecraft, the instrument design limit loads were developed in partnership with NASA and the instrument team. The three teams collaborated on a regular basis starting in the early design phase and continuing through observatory level testing.

Limit Loads↗
NASA NTRS1980

The Energy Efficient Engine /E3/ - Advancing the state of the art

The NASA-sponsored Energy Efficient Engine (E3) Program, intended to develop and demonstrate the technology for reducing fuel consumption in future environmentally acceptable turbofan engines, is presented. The development of the flight propulsion system design is outlined and the resulting preliminary design is presented. Component design and subcomponent supporting technology verification work in progress is discussed, with attention given to fabrication development, the transition duct, mixer design, the fan, the high-pressure compressor, the combustor, and the high-pressure turbine. It is noted that the detailed design of the core components is essentially complete and fabrication of the hardware has begun, with the program on schedule toward testing in 1982.

Gardner, W. B.↗
NASA NTRS2018

Comparing Free-Free and Shaker Table Model Correlation Methods Using Jim Beam

Finite element model correlation as part of a spacecraft program has always been a challenge. For any NASA mission, the coupled system response of the spacecraft and launch vehicle can be determined analytically through a Coupled Loads Analysis (CLA), as it is not possible to test the spacecraft and launch vehicle coupled system before launch. The value of the CLA is highly dependent on the accuracy of the frequencies and mode shapes extracted from the spacecraft model. NASA standards require the spacecraft model used in the final Verification Loads Cycle to be correlated by either a modal test or by comparison of the model with Frequency Response Functions (FRFs) obtained during the environmental qualification test. Due to budgetary and time constraints, most programs opt to correlate the spacecraft dynamic model during the environmental qualification test, conducted on a large shaker table. For any model correlation effort, the key has always been finding a proper definition of the boundary conditions. This paper is a correlation case study to investigate the difference in responses of a simple structure using a free-free boundary, a fixed boundary on the shaker table, and a base-drive vibration test, all using identical instrumentation. The NAVCON Jim Beam test structure, featured in the IMAC round robin modal test of 2009, was selected as a simple, well recognized and well characterized structure to conduct this investigation. First, a free-free impact modal test of the Jim Beam was done as an experimental control. Second, the Jim Beam was mounted to a large 20,000 lbf shaker, and an impact modal test in this fixed configuration was conducted. Lastly, a vibration test of the Jim Beam was conducted on the shaker table. The free-free impact test, the fixed impact test, and the base-drive test were used to assess the effect of the shaker modes, evaluate the validity of fixed-base modeling assumptions, and compare final model correlation results between these boundary conditions.

Modal Test↗
NASA NTRS1974

Simulator verification techniques study. Integrated simulator self test system concepts

Software and hardware requirements for implementing hardware self tests are presented in support of the development of training and procedures development simulators for the space shuttle program. Self test techniques for simulation hardware and the validation of simulation performance are stipulated. The requirements of an integrated simulator self system are analyzed. Readiness tests, fault isolation tests, and incipient fault detection tests are covered.

Montoya, G.↗
NASA NTRS1992

Orbital transfer rocket engine technology program: Soft wear ring seal technology

Liquid oxygen (LOX) compatibility tests, including autogenous ignition, promoted ignition, LOX impact tests, and friction and wear tests on different PV products were conducted for several polymer materials as verification for the implementation of soft wear ring seals in advanced rocket engine turbopumps. Thermoplastics, polyimide based materials, and polyimide-imide base materials were compared for oxygen compatibility, specific wear coefficient, wear debris production, and heat dissipation mechanisms. A thermal model was generated that simulated the frictional heating input and calculated the surface temperature and temperature distribution within the seal. The predictions were compared against measured values. Heat loads in the model were varied to better match the test data and determine the difference between the measured and the calculated coefficients of friction.

Lariviere, Brian W.↗
NASA NTRS2015

Ongoing Fixed Wing Research within the NASA Langley Aeroelasticity Branch

The NASA Langley Aeroelasticity Branch is involved in a number of research programs related to fixed wing aeroelasticity and aeroservoelasticity. These ongoing efforts are summarized here, and include aeroelastic tailoring of subsonic transport wing structures, experimental and numerical assessment of truss-braced wing flutter and limit cycle oscillations, and numerical modeling of high speed civil transport configurations. Efforts devoted to verification, validation, and uncertainty quantification of aeroelastic physics in a workshop setting are also discussed. The feasibility of certain future civil transport configurations will depend on the ability to understand and control complex aeroelastic phenomena, a goal that the Aeroelasticity Branch is well-positioned to contribute through these programs.

Bartels, Robert↗
NASA NTRS2006

An Overview of NASA's Program of Future M&S VV&A Outreach and Training Activities

NASA's Exploration Systems Mission Directorate (ESMD) is implementing a management approach for modeling and simulation (M&S) that will provide decision-makers information on the model s fidelity, credibility, and quality. The Integrated Modeling & Simulation Verification, Validation and Accreditation (IM&S W&A) process will allow the decision-maker to understand the risks involved in using a model s results for mission-critical decisions. The W&A Technical Working Group (W&A TWG) has been identified to communicate this process throughout the agency. As the W&A experts, the W&A NVG will be the central resource for support of W&A policy, procedures, training and templates for documentation. This presentation will discuss the W&A Technical Working Group s outreach approach aimed at educating M&S program managers, developers, users and proponents on the W&A process, beginning at MSFC with the CLV program.

Caine, Lisa↗
NASA NTRS1975

STDN ranging equipment

Final results of the Spaceflight Tracking and Data Network (STDN) Ranging Equipment program are summarized. Basic design concepts and final design approaches are described. Theoretical analyses which define requirements and support the design approaches are presented. Design verification criteria are delineated and verification test results are specified.

Jones, C. E.↗
NASA NTRS1979

Development of CO2 laser Doppler instrumentation for detection of clear air turbulence, volume 1

Modification, construction, test and operation of an advanced airborne carbon dioxide laser Doppler system for detecting clear air turbulence are described. The second generation CAT program and those auxiliary activities required to support and verify such a first-of-a-kind system are detailed: aircraft interface; ground and flight verification tests; data analysis; and laboratory examinations.

Harris, C. E.↗