SEARCH · Engineering Papers

Results for “portable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Study of CO2 sorbents for extravehicular activity

Portable life support equipment was studied for meeting the requirements of extravehicular activities. Previous studies indicate that the most promising method for performing the CO2 removal function removal function were metallic oxides and/or metallic hydroxides. Mgo, Ag2, and Zno metallic oxides and Mg(OH)2 and Zn(OH)2 metallic hydroxides were studied, by measuring sorption and regeneration properties of each material. The hydroxides of Mg and Zn were not regenerable and the zinc oxide compounds showed no stable form. A silver oxide formulation was developed which rapidly absorbs approximately 95% of its 0.19 Kg CO2 Kg oxide and has shown no sorption or structural degeneration through 22 regenerations. It is recommended that the basic formula be further developed and tested in large-scale beds under simulated conditions.

Colombo, G. V.↗

NASA NTRS1973

Gamma-ray observations of the galactic centre.

Review of observation data obtained with a portable gas-Cerenkov gamma-ray telescope flown twice from Parana, Argentina (31.8 deg S), to search for gamma radiation from the galactic center. The angular resolution of this detector is not good enough to resolve the source structure controversy, i.e. whether the gamma radiation is coming from point sources or from a diffuse source along the galactic plane. Comparisons with observation data of other investigators are presented and discussed.

Helmken, H. F.↗

NASA NTRS1974

Laser-actuated mechanical device

Actuator is portable and can be used in high-temperature (over 500 C) environments by incorporating tungsten metal film and quartz window. Actuator can be triggered when it is not directly in laser beam path by utilizing fiber optics. It is advantageous for remotely switching ultra-high voltage systems.

Murphy, A. J.↗

NASA NTRS1973

A proposal for standard linear algebra subprograms

A set of FORTRAN callable subprograms are proposed which will be useful in the development of efficient portable ANSI FORTRAN subprograms and applications programs in the area of linear algebra.

Hanson, R. J.↗

NASA NTRS1974

A test technique for measuring lightning-induced voltages on aircraft electrical circuits

The development of a test technique used for the measurement of lightning-induced voltages in the electrical circuits of a complete aircraft is described. The resultant technique utilizes a portable device known as a transient analyzer capable of generating unidirectional current impulses similar to lightning current surges, but at a lower current level. A linear relationship between the magnitude of lightning current and the magnitude of induced voltage permitted the scaling up of measured induced values to full threat levels. The test technique was found to be practical when used on a complete aircraft.

Walko, L. C.↗

NASA NTRS1974

Clean fuels from biomass

The feasibility of converting biomass to portable fuels is studied. Since plants synthesize biomass from H2O and CO2 with the help of solar energy, the conversion methods of pyrolysis, anaerobic fermentation, and hydrogenation are considered. Cost reduction methods and cost effectiveness are emphasized.

Hsu, Y. Y.↗

NASA NTRS1972

Biomedical engineering tasks

Electrocardiographic and vectorcardiographic bioinstrumentation work centered on the development of a new electrode system harness for Project Skylab. Evaluation of several silver electrode configurations proved superior impedance voltage performance for silver/silver chloride electrodes mounted flush by using a paste adhesive. A portable ECG processor has been designed and a breadboard unit has been built to sample ECG input data at a rate of 500 samples per second for arrhythmia detection. A small real time display driver program has been developed for statistical analysis on selected QPS features. Engineering work on a sleep monitoring cap assembly continued.

Source record↗

NASA NTRS1974

Vibration and noise measuring instruments built in the RSR

The demands placed upon vibration and noise measuring instruments are discussed. The instruments that are now being manufactured in the RSR are described, as well as those that are being made ready for manufacture, namely: the VP-3 portable vibrometer, the N2103 precision electronic vibrometer, the N2103 B sonometric preamplifier, as well as vibration transducers of the electrodynamic and piezoelectric types.

Georgescu, I.↗

NASA NTRS1974

Fabrication of neurophysiological monitoring systems

A system designed to collect electroencephalographic, electro-oculographic, electromyographic, and head motion data is described. The portable instrumentation provides a rapid and simple means by which neurophysiological data can be obtained by the patient in his home and the taped data returned to the laboratory for analysis. The system was designed primarily for the study of sleep.

Frost, J. D., Jr.↗

NASA NTRS1973

Apparatus for monitoring the condition of mining machinery transmissions

A portable apparatus is reported for measuring vibro-acoustic signals of mining machine transmissions for analysis of vibration levels and for damage detection. An automatic recording device connected to the detection channels permits measurments of the overall level of vibroacceleration as well as of the level in octave bands.

Levites, I. A.↗

NASA NTRS1972

Stress wave riveting

The stress wave riveter deforms the rivet material by a high amplitude stress wave. Thus, the entire rivet is set in motion radially. The rivet expands rapidly and impacts the hole surface before the rivet tail begins to form. Unlike the oversqueezed rivets, therefore, it sets up uniform interference without distortion in the skins. Furthermore, the radial velocity is so high (over 200 in./sec) that upon impact with the hole surface it deforms the surface plastically. This is especially effective in aluminum skins. Thus the SWR combines the advantages of plastically deforming the hole and the economic advantage of a relatively nonprecision hole and inexpensive rivets like those used in oversqueezing. The additional advantage SWR offers is that it is a portable tool.

Leftheris, B. P.↗

NASA NTRS1974

A dynamic pressure generator for checking complete pressure sensing systems installed on an airplane

A portable dynamic pressure generator, how it operates, and a test setup on an airplane are described. The generator is capable of providing a sinusoidal pressure having a peak-to-peak amplitude of 3.5 N/sq cm (5 psi) at frequencies ranging from 100 hertz to 200 hertz. A typical power spectral density plot of data from actual dynamic pressure fluctuation tests within the air inlet of the YF-12 airplane is presented.

Demarco, D. M.↗

NASA NTRS1973

Apollo PLSS - A criterion for space back pack equipment

Description of the Portable Life Support System (PLSS) used to support the astronauts during the six lunar surface excursions of the Apollo Program. The basic requirements imposed on the system are reviewed, the system and its capability are described, overall program performance is assessed, and the significant experience gained which can be applied to life support system programs of the future is discussed.

Goodwin, F. H.↗

NASA NTRS1973

EVA crew workstation provisions for Skylab and Space Shuttle missions

A synopsis of scheduled extravehicular activities (EVA) for a nominal Skylab mission is presented with an overview of EV workstation equipment developed for the program. Also included are the unprogrammed extravehicular activities and supporting equipment that was quickly developed and retrofitted in a series of successful operations to salvage the crippled Skylab Cluster during the Skylab 1 Mission. Because EVA appears to be a requirement for the Space Shuttle Program, candidate EV workstations are discussed in terms of effective and economical Shuttle payload servicing and maintenance. Several such concepts, which could provide a versatile, portable EV support system, are presented.

Brown, N. E.↗

NASA NTRS1973

Radio interferometry for international study of the earthquake mechanism

Consideration of the possibility of developing an improved technique for measuring crustal deformations over distances of hundreds to thousands of kilometers to even intercontinental distances. Attention is focused on the uses of very long baseline interferometry in the structuring of a transportable radio interferometer system capable of high-accuracy three-dimensional earth surveying. In particular, the essential elements of a system called astronomical radio interferometric earth surveying are described. This system involves the use of a pair of antennas, one fixed and one portable, which simultaneously receive random radio signals emitted from an extragalactic radio source. A combination of a readily transportable small-diameter dish for use during a limited period at a remote site with a larger-diameter antenna with a better receiver is recommended.

Macdoran, P. F.↗

NASA NTRS1973

Application of dielectric constant measurements to radar imagery interpretation

A ground-truth scheme is briefly outlined, specifically, the measurement of the dielectric constant. Two portable instruments were designed specifically for this purpose: a Q-meter for measurement of dielectric constant and loss tangent, and an instrument to measure electrical properties of the two operating frequencies of the imaging radar. Several general cases of radar-earth surfaces interaction are described; also, examples of radar imagery and some data on ice and snow are presented.

Bryan, M. L.↗

NASA NTRS1973

3-D multilateration for measurement of earth crustal deformation and network densification

Discussion of how range and range-difference data types can make possible precise three-dimensional measurement of ground station positions and the position of an artificial signal source, without explicit dependence upon the signal source trajectory. An effective strategy for such measurement is to combine the multilateration approach with a VLBI system using natural radio sources. The VLBI methods would provide a coarse grid of three-dimensional benchmark locations on a regional and global scale. Multilateration stations would then occupy these coarse grid locations and provide a means for highly portable, relatively low-cost units to then densify networks on a regional and local scale. Because a multilateration approach can make use of strong artificial radio sources, it makes possible the use of relatively low-cost, highly mobile stations. Such mobile stations are virtually essential for three dimensional surveying in heavily urbanized areas or in rugged terrain.

Ong, K. M.↗

NASA NTRS1974

Utilization of space technology for terrestrial solar power applications

A description is given of the evolution of photovoltaic power systems designed and built for terrestrial applications, giving attention to problem areas which are currently impeding the further development of such systems. The rooftop testing of surplus solar panels is considered along with solar powered seismic observatories, solar powered portable radio sets, and design considerations identified from past experience. Present activities discussed are related to a solar powered on-shore beacon flasher system, a solar powered buoy, and a solar powered beacon flasher buoy.

Yasui, R. K.↗