Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pattern dependence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Oxidation kinetic modelling of Fe-based oxygen carriers for chemical looping applications: Impact of the topochemical effect

Chemical looping is a promising technology for fossil fuel utilization due to its high fuel conversion efficiency with in-situ CO 2 capture capability. Metal oxide are used as oxygen carriers (OCs) and circulate between a fuel reactor and an air reactor to perform reduction and oxidation reactions, respectively. In general, OC exiting the fuel reactor is not reduced fully to its metallic state due to many factors including carbon deposition and OC deactivation. Therefore, the effect of the initial reduction state on the OC oxidation in the air reactor is a significant parameter for consideration in developing the oxidation kinetic model. The objective of this work is to develop a physically significant kinetic model that applies to the oxidation of both initially fully and partially reduced OC with air. For this study, 1.5 mm Fe-based OC particle supported with TiO 2 was used as the model OC particle due to its complex multistep reaction nature. The oxidation kinetics were experimentally investigated in a thermogravimetric analyzer (TGA). Results indicate a significant difference in the oxidation rate profile for the OCs when oxidized from an initially fully reduced compared to an initially partially reduced state. Elemental mapping via energy-dispersive X-ray spectroscopy (EDS) reveals a shrinking-core type topochemical pattern across the OC particle, which was identified to be the cause of the dependency of kinetics on the initial reduction state. A generalized kinetic model was developed based on the observed shrinking-core behavior without presuming any rate-determining steps and experimentally validated over a broad range of temperatures (800–1000 °C) and oxygen concentrations (5, 7, 10, and 15 mol%). Impacts of particle porosity, size, and core-shell structure on the OC oxidation kinetics were analyzed in the developed oxidation kinetic model to suggest methods of improving the oxidation rate of the OC without modifying the chemical composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Differential inhibition of mucin-type O-glycosylation (MTOG) induced by peracetyl N-thioglycolyl-d-galactosamine (Ac5GalNTGc) in myeloid cells

Highlights: • Each cell type expresses specific set of glycosyl transferases that result in unique pattern of mucin-type O-glycosylation. • MTOG of CD antigens is regulated depending on the specific cell type, developmental stage, and resting or activated state. • Metabolic incorporation of N-thioglycolyl-d-galactosamine results in cell-type dependent differential inhibition of MTOG. • Myeloid cells metabolize Ac{sub 5}GalNTGc with varying efficiency resulting in differential inhibition of MTOG on CD43. Investigations on the structure and functional roles of glycosylation – an intricate, complex, and dynamic post translational modification on proteins – in biological processes has been a challenging task. Glycan modifications vary depending on the specific cell type, its developmental stage, and resting or activated state. In the present study, we aim to understand the differences between the mucin-type O-glycosylation (MTOG) of two functionally divergent human cell lines, K562 (chronic myeloid leukemia) and U937 (histiocytic lymphoma), having myeloid origins. MTOG is initiated by the addition of N-acetyl-α-d-galactosamine (GalNAc) to Ser/Thr of glycoproteins. We exploited the metabolic glycan engineering (MGE) strategy using the peracetyl N-thioglycolyl-d-galactosamine (Ac{sub 5}GalNTGc), a synthetic GalNAc analogue, to engineer the glycoconjugates. Ac{sub 5}GalNTGc was metabolized and incorporated as N-thioglycolyl-d-galactosamine (GalNTGc) in cell surface glycoproteins in both the cell lines with varying degrees of efficiency. Notably, metabolic incorporation of GalNTGc resulted in differential inhibition of MTOG. It was observed that endogenous glycosylation machinery of K562 is relatively more stringent for selecting GalNTGc whereas U937 is flexible towards this selection. Additionally, we studied how the glycan modifications vary on a given CD antigen in these cell lines. Particularly, MTOG on CD43 was differentially inhibited in K562 and U937 as revealed by glycan-dependent and glycan-independent antibodies. It was observed that the effect of MGE on CD43 was similar to global effects on both cell lines. Consequences of MGE using GalNAc analogues depend on the expression and activity of various glycosyl transferases which determine global glycosylation on cell surface as well as on specific glycoproteins.

60 APPLIED LIFE SCIENCES↗

Series of compositions Bi{sub 2}(M'{sub x}M{sub 1-x}){sub 4}O{sub 9} (M', M=Al, Ga, Fe; 0{<=}x{<=}1) with mullite-type crystal structure: Synthesis, characterization and {sup 18}O/{sup 16}O exchange experiment

Series of compositions Bi{sub 2}(M'{sub x}M{sub 1-x}){sub 4}O{sub 9} with x=0.0, 0.1,..., 1.0 and M'/M=Ga/Al, Fe/Al and Fe/Ga were synthesized by dissolving appropriate amounts of corresponding metal nitrate hydrates in glycerine, followed by gelation, calcination and final heating at 800 {sup o}C for 24 h. The new compositions with M'/M=Ga/Al form solid-solution series, which are isotypes to the two other series M'/M=Fe/Al and Fe/Ga. The XRD data analysis yielded in all cases a linear dependence of the lattice parameters related on x. Rietveld structure refinements of the XRD patterns of the new compounds, Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} reveal a preferential occupation of Ga in tetrahedral site (4 h). The IR absorption spectra measured between 50 and 4000 cm{sup -1} of all systems show systematic shifts in peak positions related to the degree of substitution. Samples treated in {sup 18}O{sub 2} atmosphere (16 h at 800 {sup o}C, 200 mbar, 95% {sup 18}O{sub 2}) for {sup 18}O/{sup 16}O isotope exchange experiments show a well-separated IR absorption peak related to the M-{sup 18}O{sub c}-M vibration, where O{sub c} denotes the common oxygen of two tetrahedral type MO{sub 4} units. The intensity ratio of M-{sup 18}O{sub c}/M-{sup 16}O{sub c} IR absorption peaks and the average crystal sizes were used to estimate the tracer diffusion coefficients of polycrystalline Bi{sub 2}Al{sub 4}O{sub 9} (D=2x10{sup -22} m{sup 2}s{sup -1}), Bi{sub 2}Fe{sub 4}O{sub 9} (D=5x10{sup -21} m{sup 2}s{sup -1}), Bi{sub 2}(Ga/Al){sub 4}O{sub 9} (D=2x10{sup -21} m{sup 2}s{sup -1}) and Bi{sub 2}Ga{sub 4}O{sub 9} (D=2x10{sup -20} m{sup 2}s{sup -1}). - Graphical abstract: Fig. Perspective view of the mullite-type Bi{sub 2}(M'{sub x}M{sub 1-x}){sub 4}O{sub 9} unit cell (M', M=Al, Ga, Fe). Display Omitted

36 MATERIALS SCIENCE↗

Structure and morphology evolution of silica-modified pseudoboehmite aerogels during heat treatment

Silica-modified pseudoboehmite aerogels (0, 10, 20 at% of Si) were prepared by sol–gel method followed by supercritical drying. The phase transformations, changes in structure and morphology upon calcination were thoroughly investigated by advanced X-Ray diffraction (XRD) techniques and high-resolution transmission electron microscopy (HRTEM). Obtained pseudoboehmite samples had specific nanostructure: ultrathin two-dimensional (2D) crystallites were loosely packed. The silica dopant drastically enhanced the crystallite anisotropy. Thus, the aerogel with Al:Si atomic ratio of 9:1 consisted of the pseudoboehmite nanosheets with thickness of one unit cell (average dimensions of 14.0×1.2×14.5 nm). The specific nanostructure caused remarkable features of experimental XRD patterns, including anisotropic peak broadening and appearance of forbidden reflection. Direct simulation of XRD patterns with using the Debye Scattering Equation allowed the size and morphology of pseudoboehmite crystallites to be determined. The silica addition strongly delayed formation of γ-alumina and further phase transformations upon calcinaton. Thermal stability of alumina was suggested to be affected by the particle morphology inherited from the pseudoboehmite precursor. - Graphical abstract: Pseudoboehmite samples had specific nanostructure: ultrathin two-dimensional (2D) crystallites were loosely packed. - Highlights: • Silica-doped boehmites were prepared by sol–gel method with supercritical drying. • Ultrathin two-dimensional crystallites of pseudoboehmite were obtained. • Changes in structure and morphology upon calcination were studied. • Simulation of XRD patterns was performed with use of the Debye Scattering Equation. • Thermal stability of alumina depended on morphology inherited from pseudoboehmite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading

The current work aims at proposing an EBSD-based indicator for fatigue damage of a Fe-3Si steel. At the same time direct observation of dislocation structures is provided by electron channelling contrast imaging (ECCI). The investigation consisted in processing the EBSD data from patterns collected on specimen subjected to low cycle fatigue. It revealed two different regimes depending on the applied total strain variation which is explained by the identification of the dislocations structures and their evolution. At low strain variation, strain accommodation occurs by planar glide of dislocations uniformly distributed throughout the grains. No misorientation evolution is observed. At higher strain variation, the vein-channel structure is observed within the grain and the wall-channel structure in the vicinity of grain boundaries. The misorientation between these two dislocation structures is evaluated at about 0.7° which is detected by the EBSD analyses and explains the increase of the different misorientation based criteria. The EBSD study enables also the prediction of crack initiation mode. Finally, this study points out the limits of the EBSD technique as no misorientation evolution is detected at small strain variation. Indeed, the lattice distortion is too weak to be detected by conventional EBSD. - Highlights: • Microstructure investigation of the fatigue behaviour of an iron-silicon steel • Use of cECCI to investigate the fatigue dislocations structures • Characterisation of local plastic accommodation through EBSD misorientation criteria.

36 MATERIALS SCIENCE↗

Cellulose-precursor synthesis of nanocrystalline Co{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4} spinel ferrites

Highlights: Black-Right-Pointing-Pointer Synthesis of spinel copper cobalt nanoferrite particles from a cellulose precursor for the first time. Control of nanosize and properties of nanoferrites can take place by varying the calcining temperature. The simple, low cost, easy cellulose process is a choice of nanoparticle processing technology. -- Abstract: Nanocrystalline Cu{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} powders were prepared via a metal-cellulose precursor synthetic route. Cellulose was used as a fuel and a dispersing agent. The resulting precursors were calcined in the temperature range of 450-600 Degree-Sign C. The phase development of the samples was determined by using Fourier transform infrared (FT-IR) spectroscopy and powder X-ray diffraction (XRD). The field-dependent magnetizations of the nanopowders were measured by vibrating sample magnetometer (VSM). All XRD patterns are of a spinel ferrite with cubic symmetry. Microstructure of the ferrites showed irregular shapes and uniform particles with agglomeration. From XRD data, the crystallite sizes are in range of 16-42 nm. Saturation magnetization and coercivity increased with increasing calcining temperature due to enhancement of crystallinity and reduction of oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilizing Ni-rich layered cathode for high-voltage operation through hierarchically heterogeneous doping with concentration gradient

High-nickel LiNi x Mn y Co 1-x-y O 2 (NMC) cathodes have demonstrated superior energy density, yet their stability is compromised under high voltage conditions. To address this, here we propose a strategy of heterogeneous doping with a concentration gradient, specifically through Sr–Zr co-modification. We synthesized Ni-rich NMC particles featuring several micron-sized secondary particles composed of micron-sized primary grains. This design aims to harness the structural robustness of single-crystalline grains and the favorable diffusion kinetics of polycrystalline secondary particles. Systematic characterization using a combination of electrochemical measurements and synchrotron analytics reveals an intriguing pattern of hierarchically heterogeneous Sr–Zr co-doping. It demonstrates a depth-dependent concentration gradient at the secondary particle level and competing dopant segregation over the buried grain boundaries. This unique characteristic creates opportunities for enhancing battery performance, particularly by optimizing precursors and implementing advanced modulation techniques. We also investigate the dissolution and precipitation of the cathode's transition metal cations upon high-voltage cycling. These insights suggest that a tailored compositional variation can be a viable approach to effectively design the next-generation high-Ni NMC cathode materials for high-voltage lithium batteries.

36 MATERIALS SCIENCE↗

Covalent Functionalization of Nickel Phosphide Nanocrystals with Aryl-Diazonium Salts

Covalent functionalization of Ni 2 P nanocrystals was demonstrated using aryl-diazonium salts. Spontaneous adsorption of aryl functional groups was observed, with surface coverages ranging from 20 to 96% depending on the native reactivity of the salt as determined by the aryl substitution pattern. Increased coverage was possible for low reactivity species using a sacrificial reductant. Functionalization was confirmed using thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The structure and energetics of this nanocrystal electrocatalyst system, as a function of ligand coverage, were explored with density functional theory calculations. The Hammett parameter of the surface functional group was found to linearly correlate with the change in Ni and P core-electron binding energies and the nanocrystal's experimentally and computationally determined work function. The electrocatalytic activity and stability of the functionalized nanocrystals for hydrogen evolution were also improved when compared to the unfunctionalized material, but a simple trend based on electrostatics was not evident. Density functional theory was used to understand this discrepancy, revealing that H adsorption energies on the covalently functionalized Ni 2 P also do not follow the electrostatic trend and are predictive descriptors of the experimental results.

14 SOLAR ENERGY↗

Computational Modeling of Exciton-Bath Hamiltonians for Light Harvesting 2 and Light Harvesting 3 Complexes of Purple Photosynthetic Bacteria at Room Temperature

Light harvesting 2 (LH2) complex is the primary component of the photosynthetic unit of purple bacteria that is responsible for harvesting and relaying excitons. The electronic absorption line shape of LH2 contains two major bands at 800 and 850 nm wavelength regions. Under low light conditions, some species of purple bacteria replace LH2 with light harvesting 3 (LH3), a variant form with almost the same structure as the former but with distinctively different spectral features. The major difference between the absorption line shapes of LH2 and LH3 is the shift of the 850 nm band of the former to a new 820 nm region. The microscopic origin of this difference has been the subject of some theoretical/computational investigations. However, the genuine molecular level source of such a difference is not clearly understood yet. This work reports a comprehensive computational study of LH2 and LH3 complexes so as to clarify different molecular level features of LH2 and LH3 complexes and to construct simple exciton-bath models with a common form. All-atomistic molecular dynamics simulations of both LH2 and LH3 complexes provide detailed molecular level structural differences of bacteriochlorophylls (BChls) in the two complexes, in particular, in their patterns of hydrogen bonding (HB) and torsional angles of the acetyl group. Time-dependent density functional theory calculation of the excitation energies of BChls for structures sampled from the MD simulations suggests that the observed differences in the HB and torsional angles cannot fully account for the experimentally observed spectral shift of LH3. Potential sources that can explain the actual spectral shift of LH3 are discussed, and their magnitudes are assessed through fitting of experimental line shapes. Furthermore, these results demonstrate the feasibility of developing simple exciton-bath models for both LH2 and LH3, which can be employed for large-scale exciton quantum dynamics in their aggregates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D-Printed pHEMA Materials for Topographical and Biochemical Modulation of Dorsal Root Ganglion Cell Response

Understanding and controlling the interactions occurring between cells and engineered materials are central challenges toward progress in the development of biomedical devices. In this work, we describe materials for direct ink writing (DIW), an extrusion-based type of 3D printing, that embed a custom synthetic protein (RGD-PDL) within the microfilaments of 3D-hydrogel scaffolds to modify these interactions and differentially direct tissue-level organization of complex cell populations in vitro. The RGD-PDL is synthesized by modifying poly-d-lysine (PDL) to varying extents with peptides containing the integrin-binding motif Arg-Gly-Asp (RGD). Compositional gradients of the RGD-PDL presented by both patterned and thin-film poly(2-hydroxyethyl) methacrylate (pHEMA) substrates allow the patterning of cell-growth compliance in a grayscale form. The surface chemistry-dependent guidance of cell growth on the RGD-PDL-modified pHEMA materials is demonstrated using a model NIH-3T3 fibroblast cell line. The formation of a more complex cellular system—organotypic primary murine dorsal root ganglion (DRG)—in culture is also achieved on these scaffolds, where distinctive forms of cell growth and migration guidance are seen depending on their RGD-PDL content and topography. In conclusion, this experimental platform for the study of physicochemical factors on the formation and the reorganization of organotypic cultures offers useful capabilities for studies in tissue engineering, regenerative medicine, and diagnostics.

36 MATERIALS SCIENCE↗

Halogenation-Dependent Effects of the Chlorosulfolipids of Ochromonas danica on Lipid Bilayers

The chlorosulfolipids are amphiphilic natural products with stereochemically complex patterns of chlorination and sulfation. Despite their role in toxic shellfish poisoning, potential pharmacological activities, and unknown biological roles, they remain understudied due to the difficulties in purifying them from natural sources. The structure of these molecules, with a charged sulfate group in the middle of the hydrophobic chain, appears incompatible with the conventional lipid bilayer structure. Questions about chlorosulfolipids remain unanswered partly due to the unavailability of structural analogues with which to conduct structure–function studies. Here, we approach this problem by combining enantioselective total synthesis and membrane biophysics. Using a combination of Langmuir pressure–area isotherms of lipid monolayers, fluorescence imaging of vesicles, mass spectrometry imaging, natural product isolation, small-angle X-ray scattering, and cryogenic electron microscopy, we show that danicalipin A (1) likely inserts into lipid bilayers in the headgroup region and alters their structure and phase behavior. Specifically, danicalipin A (1) thins the bilayer and fluidizes it, allowing even saturated lipid to form fluid bilayers. Lipid monolayers show similar fluidizing upon insertion of danicalipin A (1). Furthermore, we show that the halogenation of the molecule is critical for its membrane activity, likely due to sterically controlled conformational changes. Synthetic unchlorinated and monochlorinated analogues do not thin and fluidize lipid bilayers to the same extent as the natural product. Overall, this study sheds light on how amphiphilic small molecules interact with lipid bilayers and the importance of stereochemistry and halogenation for this interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrostatic-Driven Ridge Formation on Nanoparticles Coated with Charged End-Group Ligands

Using coarse-grained molecular dynamics simulations, we investigate the surface patterns of charged end-group ligands attached to faceted nanoparticles. A competition between electrostatic repulsion and hydrophobic ligand-ligand attraction leads to the formation of a number of different conformations of the ligand coatings. The most prominent conformation in icosahedral nanoparticles is a ridgelike structure that makes their surfaces highly anisotropic. Meanwhile, bundles seem more prominent than ridges for tetrahedral, cubic, octahedral, and dodecahedral nanoparticles of diameters comparable to the chain length. The applicability of the Debye-Huckel theory to describe the ridges is confirmed by comparing simulations with explicit ion simulations. We argue that a tunable ligand-coating pattern can be used as a simple and robust tool for achieving direction-dependent interactions between nanoparticles and provide control of their assembly into composite materials with a desired symmetry.

36 MATERIALS SCIENCE↗

Time-resolved imaging of millimeter waves using visible continuum from the positive column of a Cs-Xe dc discharge

We present a high-sensitivity technique for time-resolved imaging of millimeter waves (MMWs) using the visible continuum (VC) from the positive column (PC) of a medium-pressure Cs-Xe dc discharge. For the MMW imaging application, a uniform plasma slab of the PC of a Cs-Xe discharge with 10x8 cm{sup 2} aperture and 2 cm in thickness was generated for 45 Torr xenon. The imaging technique is based on the fact that the intensity of the e-Xe bremsstrahlung continuum from the PC increases in the visible region when the electrons in the plasma are heated by MMWs. It is shown that in the MMW intensity range from zero to the threshold of the microwave-induced plasma breakdown, the intensity of the VC from the PC of a Cs-Xe discharge increases approximately as a second-order polynomial function of the MMW intensity. The obtained experimental data agree well with our calculations of the dependence of the VC intensity on electron temperature. The Ka-band MMW field patterns at the output of conical horn antennas and in the quasioptical beam were imaged using the discharge technique. It is shown that the technique can be used for time-resolved measurement of the profiles of watt- and subwatt-level MMWs. An energy flux sensitivity of the technique of about 10 {mu}J/cm{sup 2} in the Ka-band was demonstrated. The temporal resolution of the technique is about 0.8 {mu}s. Our modeling of the transient behavior of the electron temperature in the PC shows that the time history of the electron temperature variation coincides well with the measured time history of the VC intensity variation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dipolar field-induced spin-wave waveguides for spin-torque magnonics

We use high-resolution imaging to study the propagation of spin waves in magnonic waveguides created by the dipolar magnetic fields of microscopic patterns. We show that the characteristics of spin-wave modes in such waveguides depend strongly on their geometry. In particular, by tuning the geometrical parameters, field-induced confinement for both the edge and the center waveguide modes can be achieved, enabling control over the spin-wave transmission characteristics. The studied waveguiding structures are particularly promising for the implementation of magnonic devices utilizing spin-torque phenomena.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lattice Boltzmann simulation of immiscible fluid displacement in porous media: Homogeneous versus heterogeneous pore network

Injection of anthropogenic carbon dioxide (CO{sub 2}) into geological formations is a promising approach to reduce greenhouse gas emissions into the atmosphere. Predicting the amount of CO{sub 2} that can be captured and its long-term storage stability in subsurface requires a fundamental understanding of multiphase displacement phenomena at the pore scale. In this paper, the lattice Boltzmann method is employed to simulate the immiscible displacement of a wetting fluid by a non-wetting one in two microfluidic flow cells, one with a homogeneous pore network and the other with a randomly heterogeneous pore network. We have identified three different displacement patterns, namely, stable displacement, capillary fingering, and viscous fingering, all of which are strongly dependent upon the capillary number (Ca), viscosity ratio (M), and the media heterogeneity. The non-wetting fluid saturation (S{sub nw}) is found to increase nearly linearly with logCa for each constant M. Increasing M (viscosity ratio of non-wetting fluid to wetting fluid) or decreasing the media heterogeneity can enhance the stability of the displacement process, resulting in an increase in S{sub nw}. In either pore networks, the specific interfacial length is linearly proportional to S{sub nw} during drainage with equal proportionality constant for all cases excluding those revealing considerable viscous fingering. Our numerical results confirm the previous experimental finding that the steady state specific interfacial length exhibits a linear dependence on S{sub nw} for either favorable (M ≥ 1) or unfavorable (M < 1) displacement, and the slope is slightly higher for the unfavorable displacement.

54 ENVIRONMENTAL SCIENCES↗

PROBING FINE-SCALE IONOSPHERIC STRUCTURE WITH THE VERY LARGE ARRAY RADIO TELESCOPE

High-resolution ({approx}1 arcmin) astronomical imaging at low frequency ({<=}150 MHz) has only recently become practical with the development of new calibration algorithms for removing ionospheric distortions. In addition to opening a new window in observational astronomy, the process of calibrating the ionospheric distortions also probes ionospheric structure in an unprecedented way. Here we explore one aspect of this new type of ionospheric measurement: the differential refraction of celestial source pairs as a function of their angular separation. This measurement probes variations in the spatial gradient of the line-of-sight total electron content (TEC) to {approx}10{sup -3} TECU km{sup -1} (1 TECU = 10{sup 12} cm{sup -2}) accuracy over spatial scales of under 10 km to over 100 km. We use data from the VLA Low-frequency Sky Survey (VLSS), a nearly complete 74 MHz survey of the entire sky visible to the VLA telescope in Socorro, New Mexico. These data comprise over 500 hr of observations, all calibrated in a standard way. While ionospheric spatial structure varies greatly from one observation to the next, when analyzed over hundreds of hours, statistical patterns become apparent. We present a detailed characterization of how the median differential refraction depends on source pair separation, elevation, and time of day. We find that elevation effects are large, but geometrically predictable and can be 'removed' analytically using a 'thin-shell' model of the ionosphere. We find significantly greater ionospheric spatial variations during the day than at night. These diurnal variations appear to affect the larger angular scales to a greater degree indicating that they come from disturbances on relatively larger spatial scales (hundreds of kilometers, rather than tens of kilometers)

79 ASTRONOMY AND ASTROPHYSICS↗

Noise- and dynamics-sustained patterns in a nonlinear photorefractive system

We analyze experimentally the dynamics of optical patterns emerging from a photorefractive two-wave mixing geometry where a tilted single-feedback mirror generates an advectionlike effect. Depending on the nonlocal coupling (introduced by the tilting angle) between the two counterpropagating beams, the strength of the nonlocal response of the nonlinear photorefractive bulk medium, and the distance between the mirror and the crystal, we observe the initiation of different pattern geometries, the inversion of pattern transverse phase velocity, and the bifurcation from convective to absolute instabilities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theory of x-ray scattering from laser-driven electronic systems

We describe, within the framework of quantum electrodynamics, an interaction between a nonresonant hard x-ray pulse and an electronic system in the presence of a temporally periodic laser field driving electron dynamics in this system. Here we apply Floquet theory to describe the laser-driven electronic system, and then obtain the scattering probability of an arbitrary nonresonant x-ray pulse from such a system employing the density-matrix formalism. We show that the scattering probability can be connected to the time-dependent electron density of the driven electronic system only under certain conditions, in particular, if the bandwidth of the probe x-ray pulse is sufficiently narrow to spectroscopically resolve transitions to different final states. A special focus is laid on application of the theory to laser-driven crystals in a strongly nonperturbative regime. We show how the time-dependent electron density of a crystal can be reconstructed from energy-resolved scattering patterns. This is illustrated by a calculation of a diffraction signal from a driven MgO crystal.

36 MATERIALS SCIENCE↗