SEARCH · Engineering Papers

Results for “multiple beam”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Centrality determination with a forward detector in the RHIC Beam Energy Scan

Recently, Chatterjee et al [1] used a hadronic transport model to estimate the resolution with which various experimental quantities select the impact parameter of relativistic heavy ion collisions at collision energies relevant to the Beam Energy Scan (BES) program at the Relativistic Heavy Ion Collider (RHIC). Measures based on particle multiplicity at forward rapidity were found to be significantly worse than those based on midrapidity multiplicity. Using the same model, we show that a slightly more sophisticated measure greatly improves the resolution based on forward rapidity particles; this improvement persists even when the model is filtered through a realistic simulation of a recent upgrade detector to the STAR experiment. Furthermore, these results highlight the importance of optimizing centrality measures based on particles detected at forward rapidity, especially for experimental studies that search for a critical point in the QCD phase diagram. Such measurements usually focus on proton multiplicity fluctuations at midrapidity, hence selecting events based on multiplicity at midrapidity raises the possibility of nontrivial autocorrelations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1972

Bremsstrahlung in the atmosphere.

Results of calculations concerning the emission of bremsstrahlung by electrons in the upper atmosphere and the penetration of this radiation to atmospheric depths of 3 to 10 g/sq cm, where it can be measured by balloon-borne detectors. The calculations take into account the multiple scattering and slowing down of electrons, and the multiple Compton scattering and photoelectric absorption of bremsstrahlung photons. Numerical data have been generated for electron beams incident onto the atmosphere with energies between 20 keV and 2 MeV, assuming wide-area precipitation and an incident angular distribution isotropic over the downward hemisphere. The results relate the number and energy spectrum of the incident electrons to the bremsstrahlung flux spectrum at balloon heights. The interpretation of some observed bremsstrahlung flux spectra is attempted.

Berger, M. J.↗

NASA NTRS1985

Multiple Raman up-conversion of radiation from pre-existing Langmuir turbulence

Little is known regarding the mechanisms involved in the production of radiation at frequencies which are much higher than the maximum plasma frequency in nonmagnetic plasmas. It is pointed out that radiation at high multiples of the plasma frequency has been observed in laser-pellet experiments, in relativistic beam-plasma interactions, and in low-energy beam-plasma interactions. Radiation at twice the plasma frequency can be produced by coalescence of two Langmuir waves. Another approach is based on radiation near the plasma frequency or its second harmonic, produced by instability or by external sources. Raman scatter from preexisting Langmuir turbulence is permitted repeatedly. At each step such scattering will produce frequency upshifts (anti-Stokes process) and downshifts (Stokes process). The present paper is concerned with this process. Attention is given to equilibrium spectra, analytic approximations, laser-plasma interaction and coherent radiation from relativistic electron beams.

Russell, D.↗

NASA NTRS1993

Design of high speed proprotors using multiobjective optimization techniques

A multidisciplinary optimization procedure is developed for the design of high speed proprotors. The objectives are to simultaneously maximize the propulsive efficiency in high speed cruise without sacrificing the rotor figure of merit in hover. Since the problem involves multiple design objectives, multiobjective function formulation techniques are used. A derailed two-celled isotropic box beam is used to model the load carrying member within the rotor blade. Constraints are imposed on rotor blade aeroelastic stability in cruise, the first natural frequency in hover and total blade weight. Both aerodynamic and structural design variables are used. The results obtained using both techniques are compared to the reference rotor and show significant aerodynamic performance improvements without sacrificing dynamic and aeroelastic stability requirements.

Mccarthy, Thomas R.↗

NASA NTRS1973

Airborne Laser Polar Nephelometer

A polar nephelometer has been developed at NCAR to measure the angular variation of the intensity of light scattered by air molecules and particles. The system has been designed for airborne measurements using outside air ducted through a 5-cm diameter airflow tube; the sample volume is that which is common to the intersection of a collimated source beam and the detector field of view within the airflow tube. The source is a linearly polarized helium-neon laser beam. The optical system defines a collimated field-of-view (0.5deg half-angle) through a series of diaphragms located behind a I72-mm focal length objective lens. A photomultiplier tube is located immediately behind an aperture in the focal plane of the objective lens. The laser beam is mechanically chopped (on-off) at a rate of 5 Hz; a two-channel pulse counter, synchronized to the laser output, measures the photomultiplier pulse rate with the light beam both on and off. The difference in these measured pulse rates is directly proportional to the intensity of the scattered light from the volume common to the intersection of the laser beam and the detector field-of-view. Measurements can be made at scattering angles from 15deg to 165deg with reference to the direction of propagation of the light beam. Intermediate angles are obtained by selecting the angular increments desired between these extreme angles (any multiple of 0.1deg can be selected for the angular increment; 5deg is used in normal operation). Pulses provided by digital circuits control a stepping motor which sequentially rotates the detector by pre-selected angular increments. The synchronous photon-counting system automatically begins measurement of the scattered-light intensity immediately after the rotation to a new angle has been completed. The instrument has been flown on the NASA Convair 990 airborne laboratory to obtain data on the complex index of refraction of atmospheric aerosols. A particle impaction device is operated simultaneously to collect particles from the same airflow tube used to make the scattered-light measurements. A size distribution function is obtained by analysis of the particles collected by the impaction device. Calculated values of the angular variation of the scattered-light intensity are obtained by applying Mie scattering theory to the observed size distribution function and assuming different values of the complex index of refraction of the particles. The calculated values are then compared with data on the actual variation of the scattered-light intensity obtained with the polar nephelometer. The most probable value of the complex refractive index is that which provides the best fit between the experimental light scattering data and the parameters calculated from the observed size distribution function.

Grams, Gerald W.↗

NASA NTRS2018

A New Laser Beam Pointing Method Using Laser Arrays

A new method is described for optical data transmissions from satellites using laser arrays for laser beam pointing. It combines a lens system and a VCSEL/Photodetector Array, both mature technologies, in a novel way. This system is applied to satellites in LEO. It can replace current architectures which use dynamical systems, (i.e., moving parts) to point the laser, and which use vibration isolation platforms. Results of computer simulations show diffraction limited beam propagation. Possible additional applications are to planetary distances (deep space optical communications, DSOC) to optical multiple access, to communication between a constellation of close satellites, and to satellites that use modulating retro-reflectors.

Goorjian, Peter M.↗

DOE OSTI2025

Search for an Anomalous Production of Charged-Current 𝜈 𝑒 Interactions without Visible Pions across Multiple Kinematic Observables in MicroBooNE

This Letter presents an investigation of low-energy electron-neutrino interactions in the Fermilab Booster Neutrino Beam by the MicroBooNE experiment, motivated by the excess of electron-neutrino-like events observed by the MiniBooNE experiment. This is the first measurement to use data from all five years of operation of the MicroBooNE experiment, corresponding to an exposure of 1.11 × 10 21 protons on target, a 70% increase on past results. Two samples of electron neutrino interactions without visible pions are used, one with visible protons and one without any visible protons. The MicroBooNE data show reasonable agreement with the nominal prediction, with 𝑝 values ≥26.7% when the two 𝜈 𝑒 samples are combined, though the prediction exceeds the data in limited regions of phase space. The data are further compared to two empirical models that modify the predicted rate of electron-neutrino interactions in different variables in the simulation to match the unfolded MiniBooNE low energy excess. In the first model, this unfolding is performed as a function of electron neutrino energy, while the second model aims to match the observed shower energy and angle distributions of the MiniBooNE excess. This measurement excludes an electronlike interpretation of the MiniBooNE excess based on these models at >99% CLs in all kinematic variables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS2004

THOR: Cloud Thickness from Off beam Lidar Returns

Conventional wisdom is that lidar pulses do not significantly penetrate clouds having optical thickness exceeding about tau = 2, and that no returns are detectable from more than a shallow skin depth. Yet optically thicker clouds of tau much greater than 2 reflect a larger fraction of visible photons, and account for much of Earth s global average albedo. As cloud layer thickness grows, an increasing fraction of reflected photons are scattered multiple times within the cloud, and return from a diffuse concentric halo that grows around the incident pulse, increasing in horizontal area with layer physical thickness. The reflected halo is largely undetected by narrow field-of-view (FoV) receivers commonly used in lidar applications. THOR - Thickness from Off-beam Returns - is an airborne wide-angle detection system with multiple FoVs, capable of observing the diffuse halo, detecting wide-angle signal from which physical thickness of optically thick clouds can be retrieved. In this paper we describe the THOR system, demonstrate that the halo signal is stronger for thicker clouds, and validate physical thickness retrievals for clouds having z > 20, from NASA P-3B flights over the Department of Energy/Atmospheric Radiation Measurement/Southern Great Plains site, using the lidar, radar and other ancillary ground-based data.

Cahalan, Robert F.↗

DOE OSTI2024

A study of charge symmetry violation in fragmentation functions extracted from semi-inclusive electroproduction of charged pions from protons and deuterons

We have measured the flavor dependence of multiplicities for ?+ and ?? production in semi- inclusive deep-inelastic scattering (SIDIS) on proton and deuteron targets. We used a 10.6 GeV electron beam at Jefferson Lab, and 4 msr solid angle spectrometers (HMS for electrons, SHMS for pions), the lepton vertex spanned the kinematic range 0.3 < ? < 0.6, 2 < ?2 < 5 GeV2, and 4 < ?2 < 11 GeV2. The pion fractional momentum range was 0.3 < ? < 0.7 and the small transverse momentum range was 0 < ?? < 0.25 GeV. We used the multiplicities to form sum-and- difference ratios, testing the validity of factorization. We extracted two favored and two unfavored flavor-dependent fragmentation functions (FFs) using these multiplicities. Assuming factorization at low ?? , we find that these two FFs allow for isospin breaking (charge symmetry violation) at low ?, while converging to a common flavor independent value at the highest ? of this experiment, where the factorization is most applicable.

Bhatt, Hem↗

NASA NTRS1994

High power diode laser Master Oscillator-Power Amplifier (MOPA)

High power multiple quantum well AlGaAs diode laser master oscillator - power amplifier (MOPA) systems were examined both experimentally and theoretically. For two pass operation, it was found that powers in excess of 0.3 W per 100 micrometers of facet length were achievable while maintaining diffraction-limited beam quality. Internal electrical-to-optical conversion efficiencies as high as 25 percent were observed at an internal amplifier gain of 9 dB. Theoretical modeling of multiple quantum well amplifiers was done using appropriate rate equations and a heuristic model of the carrier density dependent gain. The model gave a qualitative agreement with the experimental results. In addition, the model allowed exploration of a wider design space for the amplifiers. The model predicted that internal electrical-to-optical conversion efficiencies in excess of 50 percent should be achievable with careful system design. The model predicted that no global optimum design exists, but gain, efficiency, and optical confinement (coupling efficiency) can be mutually adjusted to meet a specific system requirement. A three quantum well, low optical confinement amplifier was fabricated using molecular beam epitaxial growth. Coherent beam combining of two high power amplifiers injected from a common master oscillator was also examined. Coherent beam combining with an efficiency of 93 percent resulted in a single beam having diffraction-limited characteristics. This beam combining efficiency is a world record result for such a system. Interferometric observations of the output of the amplifier indicated that spatial mode matching was a significant factor in the less than perfect beam combining. Finally, the system issues of arrays of amplifiers in a coherent beam combining system were investigated. Based upon experimentally observed parameters coherent beam combining could result in a megawatt-scale coherent beam with a 10 percent electrical-to-optical conversion efficiency.

Andrews, John R.↗

DOE OSTI2022

Frequency multiplication with toroidal mode number of kink/fishbone modes on a static HL-2A-like tokamak

In the presence of energetic particles (EPs), the long-lived mode (LLM) frequency multiplication with n = 1, 2, 3, or higher is often observed on HL-2A, where n is the toroidal mode number. Hybrid kinetic-MHD model simulations of the energetic particle (EP) driven kink/fishbone modes on a static HL-2A-like tokamak using NIMROD code find that when the background plasma pressure is relatively high, and the EP pressure and the beam energy are relatively low, the mode frequency increases almost linearly with EP pressure, and the frequency is proportional to n (‘frequency multiplication’), even in the absence of any equilibrium plasma rotation. In addition, the frequency multiplication persists as the safety factor at the magnetic axis q 0 varies. In the absence of EPs, the growth rate of the 1/1 mode is the largest; however, as the EP pressure increases, the growth rate of 2/2 modes or 3/3 modes becomes dominant, suggesting that higher-n modes are more vulnerable to EPs. These results may shed light on the understanding of the toroidal mode number dependence of kink/fishbone modes in the advanced scenarios of tokamaks with weak or reversed central magnetic shear.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

12 C(p,p') 12 C Reaction ( E p =19.5–30 MeV) for Active Interrogation of Special Nuclear Material

Passive detection of special nuclear material (SNM) is challenging due to its inherently low rate of spontaneous emission of penetrating radiation, the relative ease of shielding, and the fluctuating and frequently overwhelming background. Active interrogation, the use of external radiation to increase the emission rate of characteristic radiation from SNM, has long been considered to be a promising method to overcome those challenges. Current active-interrogation systems that incorporate radiography tend to use bremsstrahlung beams, which can deliver high radiation doses. Low-energy ion-driven nuclear reactions that produce multiple monoenergetic photons may be used as an alternative. The 12 C ( p , p ' ) 12 C reaction is one such reaction that could produce large yields of highly penetrating 4.4- and 15.1-MeV gamma rays. This reaction does not directly produce neutrons below the approximately 19.7 MeV threshold, and the 15.1-MeV gamma-ray line is well matched to the photofission cross section of 235 U and 238 U . In this article, we report the measurements of thick-target gamma-ray yields at 4.4 and 15.1 MeV from the 12 C ( p , p ' ) 12 C reaction at proton energies of 19.5, 25, and 30 MeV. Measurements are made with two 3 -in. EJ-309 cylindrical liquid scintillation detectors and thermoluminescent dosimeters placed at 0 ° and 90 ° , with an additional 1.5 -in. Na I ( Tl ) cylindrical scintillation detector at 0 ° . We estimate the highest yields of the 4.4- and 15.1-MeV gamma rays of 1.65 × 10 10 and 4.47 × 10 8 sr - 1 μ C - 1 at a proton energy of 30 MeV, respectively. The yields in all experimental configurations are greater than in a comparable deuteron-driven reaction that produces the same gamma-ray energies— 11 B ( d , n γ ) 12 C . However, a significant increase of the neutron radiation dose accompanies the proton energy increase from 19.5 to 30 MeV.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2025

Transverse-momentum-dependent pion structures from lattice QCD: Collins-Soper kernel, soft factor, TMDWF, and TMDPDF

We present the first lattice quantum chromodynamics (QCD) calculation of the pion valence-quark transverse-momentum-dependent parton distribution function (TMDPDF) within the framework of large-momentum effective theory (LaMET). Using correlators fixed in the Coulomb gauge (CG), we computed the quasi-TMD beam function for a pion with a mass of 300 MeV, a fine lattice spacing of 𝑎 =0.06 fm, and multiple large momenta up to 3 GeV. The intrinsic soft functions in the CG approach are extracted from form factors with large momentum transfer, and as a byproduct, we also obtain the corresponding Collins-Soper (CS) kernel. Our determinations of both the soft function and the CS kernel agree with perturbation theory at small transverse separations (𝑏 ⊥ ) between the quarks. At larger 𝑏 ⊥ , the CS kernel remains consistent with recent results obtained using both CG and gauge-invariant TMD correlators in the literature. By combining next-to-leading logarithmic factorization of the quasi-TMD beam function and the soft function, we obtain an 𝑥-dependent pion valence-quark TMDPDF for transverse separations 𝑏 ⊥ ≳1 fm. Interestingly, we find that the 𝑏 ⊥ dependence of the phenomenological parametrizations of TMDPDF for moderate values of 𝑥 are in reasonable agreement with our QCD determinations. In addition, we present results for the transverse-momentum-dependent wave function for a heavier pion with 670 MeV mass.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS2024

Electron Beam Welding of Additively Manufactured Niobium Alloy Heat Pipes

Additively manufactured refractory alloy-liquid metal heat pipes are being developed and tested for thermal management systems within nuclear propulsion and power applications. This study investigated electron beam (EB) welded joints on a laser powder bed fusion printed niobium alloy (C-103) and the impact of multiple joined heat pipe sections on working fluid flow and container leak-tightness. Results showed that EB welded joints connecting multiple heat pipe sections do not impact working fluid wicking behavior and the printed C-103 material and the EB welds joining the tubular sections created a leak-tight container. Interestingly, CT data showed an order of magnitude greater number and volume of porosity indications in the ground mating surface weld compared to the as-printed mating surface weld. The work concluded that AM is a viable manufacturing process for niobium alloy heat pipes and provided valuable insights for future AM heat pipe research and development.

Electron beam welding↗

DOE OSTI2022

Model-Based Reconstruction for Collimated Beam Ultrasound Systems

Collimated beam ultrasound systems are a novel technology for imaging inside multi-layered structures such as geothermal wells. Such systems include a transmitter and multiple receivers to capture reflected signals. Common algorithms for ultrasound reconstruction use delay-and-sum (DAS) approaches; these have low computational complexity but produce inaccurate images in the presence of complex structures and specialized geometries such as collimated beams.In this paper, we propose a multi-layer, ultrasonic, model-based iterative reconstruction algorithm designed for collimated beam systems. We introduce a physics-based forward model to accurately ac-count for the propagation of a collimated ultrasonic beam in multi-layer media and describe an efficient implementation using binary search. We model direct arrival signals, detector noise, and a spatially varying image prior, then cast the reconstruction as a maximum a posteriori estimation problem. Using simulated and experimental data we obtain significantly fewer artifacts relative to DAS while running in near real time using commodity compute resources.

Alanazi, Abdulrahman M.↗

DOE OSTI2021

QCD equation of state at finite densities for nuclear collisions

In this work, we construct the QCD equation of state at finite chemical potentials including net baryon, electric charge, and strangeness based on the results of lattice QCD simulations and the hadron resonance gas model. The situation of strangeness neutrality and a fixed charge-to-baryon ratio, which resembles that of heavy nuclei, is considered for the application to relativistic heavy-ion collisions. This increases the values of baryon chemical potential compared to the case of vanishing strangeness and electric charge chemical potentials, modifying the fireball trajectory in the phase diagram. We perform viscous hydrodynamic simulations and demonstrate the importance of multiple chemical potentials for identified particle production in heavy-ion collisions at the RHIC and SPS beam energy scan energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2021

Filament-induced breakdown spectroscopy signal enhancement using optical wavefront control

Filament-induced breakdown spectroscopy (FIBS) is an analytical method that holds significant promise for remote sensing. In FIBS, it is desirable to maximize the intensity and improve the reproducibility of a selected spectroscopic feature. Here, we demonstrate the use of wavefront control in conjunction with a genetic algorithm in FIBS of metallic copper and show that this approach can increase the efficacy of filament-induced breakdown signal production. Through wavefront optimization, we enhance the intensity of a chosen characteristic spectroscopic feature of copper by a factor of approximately 3 when performing filamentation over a 1-meter distance. The relative standard deviation of signal intensity is reduced from ~17% to ~12% after optimization. We find that modification of the wavefront by introduction of astigmatism and coma maximizes the signal intensity, and these aberrations appear in two distinct trials of the genetic algorithm. We compare these findings to previous work on multiple filament control and discuss the possible mechanisms that lead to signal enhancement associated with both the beam amplitude and phase profile. A broader use of wavefront control with feedback may improve the performance of FIBS in remote sensing applications.

42 ENGINEERING↗

DOE OSTI2025

Arsenic activation and compensation in single crystal CdTe bilayers

In state-of-the art polycrystalline CdTe photovoltaics, group-V dopant activation is about 2%. Low activation can create electronic defects and lead to recombination and band tail losses. To develop methods to overcome this limitation, dopant activation was systematically investigated using molecular beam epitaxy (MBE) grown single crystal bilayers of As-doped CdTe on undoped CdTe. Results suggest multiple paths for improved As-activation in polycrystalline CdTe-based devices. It was found that the carrier concentration in this MBE material saturated at ∼3 × 1016 cm−3, with high levels (>50%) of As-activation possible. High activation could be achieved with a post-growth activation temperature of ∼450 °C, when the initial doping level was below the saturation level. However, at typical polycrystalline As incorporation levels (>5 × 1016 cm−3), the excess As is inactive or compensating, requiring elevated temperatures (500–600 °C) to achieve high activation. Oxygen in the annealing ambient was detrimental, while the effect of CdCl2 in the ambient is more case-dependent. A 575 °C activation anneal was combined with a 450 °C CdCl2 treatment to better understand the implications for polycrystalline CdTe. Interestingly, on highly doped samples, processes ending with a high temperature step displayed high activation, while those ending at 450 °C significantly reduced the carrier concentration (with or without CdCl2 in the ambient). Low activation can be restored with another high temperature anneal, allowing reproducible toggling between high and low activation based on the final temperature. Photoluminescence revealed the presence of donor–acceptor pairs in the low activation state that appear to be associated with a compensating defect.

14 SOLAR ENERGY↗