Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model updating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Standard Library Grid-Forming Hybrid Control Inverter-Based Resource Model Specification (REGFM_C1)

This document describes a standard library grid-forming (GFM) hybrid control inverter-based resource (IBR) model. The GFM hybrid control approach implements both a typical GFM control and a typical grid-following (GFL) control inside one single inverter simultaneously, so that it can take advantage of both methods without comprising the benefits of a typical GFM. The initial version of model specification was jointly developed by Pacific Northwest National Laboratory (PNNL), Tesla Energy, and EPRI, and it was revised multiple times later to incorporate suggestions from WECC MVS members. Tesla Energy provided main control blocks to support the development of this model specification. This standard library model is developed to help the utility industry better understand the GFM technology. The model could be used to represent equipment for long-term planning studies where vendor-specific models are not available. As equipment matures and improves, standard library models will be updated to capture the new functionalities of GFMs. It is not intended that these models will always remain representative of all future GFM technologies.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2001

Electron Dynamics in the Magnetotail

The goal of this research has been to study the effects of electrons on magnetotail dynamics and current sheet structure. The approach is to follow ion trajectories in a global model of the magnetotail, use a Boltzmann approximation to include electrons, and then to update the field model according to the currents that are generated by the cross-tail electric field and/or induced fields. Parallel (and perpendicular) electric fields that form are included through the Boltzmann relation. Transverse electron currents are to be included through adiabatic drift equations.

Schriver, David↗
DOE OSTI2021

International Collaborations Activities on Disposal in Argillite R&D: Characterization Studies and Modeling Investigations

This interim report is an update of ongoing experimental and modeling work on bentonite material described in Jové Colón et al. (2019, 2020) from past international collaboration activities. As noted in Jové Colón et al. (2020), work on international repository science activities such as FEBEX-DP and DECOVALEX19 is either no longer continuing by the international partners. Nevertheless, research activities on the collected sample materials and field data are still ongoing. Descriptions of these underground research laboratory (URL) R&D activities are described elsewhere (Birkholzer et al. 2019; Jové Colón et al. 2020) but will be explained here when needed. The current reports recent reactive-transport modeling on the leaching of sedimentary rock.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2006

Progress Toward a Format Standard for Flight Dynamics Models

In the beginning, there was FORTRAN, and it was... not so good. But it was universal, and all flight simulator equations of motion were coded with it. Then came ACSL, C, Ada, C++, C#, Java, FORTRAN-90, Matlab/Simulink, and a number of other programming languages. Since the halcyon punch card days of 1968, models of aircraft flight dynamics have proliferated in training devices, desktop engineering and development computers, and control design textbooks. With the rise of industry teaming and increased reliance on simulation for procurement decisions, aircraft and missile simulation models are created, updated, and exchanged with increasing frequency. However, there is no real lingua franca to facilitate the exchange of models from one simulation user to another. The current state-of-the-art is such that several staff-months if not staff-years are required to 'rehost' each release of a flight dynamics model from one simulation environment to another one. If a standard data package or exchange format were to be universally adopted, the cost and time of sharing and updating aerodynamics, control laws, mass and inertia, and other flight dynamic components of the equations of motion of an aircraft or spacecraft simulation could be drastically reduced. A 2002 paper estimated over $ 6 million in savings could be realized for one military aircraft type alone. This paper describes the efforts of the American Institute of Aeronautics and Astronautics (AIAA) to develop a standard flight dynamic model exchange standard based on XML and HDF-5 data formats.

Jackson, E. Bruce↗
NASA NTRS2003

Obliquity Driven Climate Change in Mars' Recent Past

We use the NASA/Ames grid Mars general circulation model with an updated radiation code and cloud nlicrophysics scheme. To speed up the simulations, we run the model at fairly coarse resolution (7.5" latitude x 22.5" longitude). Radiation Code Fluxes and heating rates are calculated from a radiation code based on the two-stream solution to radiative transfer that fully accounts for multiple scattering in the presence of gaseous absorp- tion. The model has 12 spectral intervals. Dust and water ice scattering properties are included. For dust, we use the Ockert-Bell [9] values in the visible, and Forget [IO] values in the infrared. For ice, we can either compute them online as the cloud evolves, or we can specify them. Gaseous opacities for water vapor and CO2 are calculated from correlated k-distributions taken from full line-by-line models. Cloud Microphysics Our cloud scheme is based on momentlorder scheme in which the mass mixing ratio and number density of the cloud ensemble are the advected species. From these we obtain a mean particle size and an estimate or the particle size distribution assuming a variance) which we then divide into 8 bins. Cloud microphysics is performed in each of these bins and includes nucleation, condensation, and gravitational settling. Dust is treated as a tracer and serves as condensation nuclei. The altered size distribution is then converted back into a mean size, a mixing ratio, and a particle number density.

Haberle, R. M.↗
NASA NTRS2017

Methods for Probabilistic Uncertainty Analysis and Bayesian Analysis with Examples of Statistically Analyzing Data to Revise MMOD Risk Estimates and Compare Models

Probabilistic methods are presented for characterizing and quantifying uncertainties in models and model predictions. Techniques are given for constructing specific uncertainty distributions based on available information. Alternative techniques are given for propagating uncertainties in model inputs to obtain the uncertainty in the model result or prediction. Bayesian techniques are also described for utilizing data and information to update and revise model results and predictions. The focus is on applications with numerous specific examples given. The use of data to revise Micrometeoroid and Orbital Debris (MMOD) risk prediction models are among the examples given.

Risk↗
DOE OSTI2024

Improved Earthquake Source Parameters with 3D Wavespeed Models in California and Nevada

Seismic tomography harnesses earthquake data to explore the inaccessible structure of the Earth. Adjoint waveform tomography (AWT), a method of seismic tomography, updates the tomographic model by optimizing the fit between observed earthquake data and synthetic waveforms. The synthetic data are calculated by solving the wave equation through a given 3D model. An important requirement to calculating synthetics is the source information (location, centroid time, depth, and moment tensor). Errors in source information affect the quality of the synthetics produced, which in turn can limit how structure can be inferred in the AWT workflow. Here, to test the effect of updating source information, we used MTTime (Chiang, 2020), a time-domain full-waveform moment tensor inversion code, to calculate the moment tensors and depths of 118 earthquakes that occurred in California and Nevada over a 20-yr period. We calculated 3D Green’s functions using a 3D seismic wavespeed model of California and Nevada (Doody et al., 2023b). We show that the inverted solutions provide better waveform fits than the Global Centroid Moment Tensor catalog and increase usable, well-correlated data by up to 7%. Therefore, we argue that recalculating source parameters should be considered in AWT workflows, particularly for smaller magnitude events (⁠M w > 5.0).

58 GEOSCIENCES↗
DOE OSTI2020

Spherically expanding flame in silane–hydrogen–nitrous oxide–argon mixtures

The effect of silane addition on the laminar flame speed ($S^0_u$) of flames propagating in hydrogen–nitrous oxide–argon mixtures has been investigated experimentally for the first time using the spherically expanding flame technique in a constant volume combustion chamber. Replacing hydrogen by silane and maintaining the equivalence ratio constant, much higher flame speeds, explosion peak pressures, and pressure rise coefficients were measured. A previously developed detailed reaction model has been updated based on ab initio thermodynamic properties calculations and collision limit violation analysis. The improved reaction model demonstrates encouraging performance in predicting the flame speed, with a mean absolute error below 11%. To explain the effect of silane addition on the flame dynamics, a number of parameters have been calculated including OH and H rate of production, heat release rate per reaction, and sensitivity coefficient on . The dynamics of freely propagating flames in SiH 4 –H 2 –N 2 O–Ar mixtures is essentially controlled by reactions of the H–O–N chemical system: N 2 O+H=N 2 +OH, OH+H 2 =H 2 O+H, and N 2 O(+M)=N 2 +O(+M). Whereas silane addition does not influence much the rate of production of OH, it significantly modifies that of H with a number of pyrolytic chemical pathways of silicon hydrides, such as SiH+H 2 =SiH 2 +H and Si+H 2 =SiH+H, which act as sink of H atom as they proceed in the backward direction. The reactions forming SiO(s) and SiO 2 (s), such as SiO+OH=SiO 2 (s)+H and 2SiO=2SiO(s), are exothermic and significantly contribute to the temperature increase. The adiabatic, constant pressure flame temperature for mixture containing silane is significantly higher, up to several 100’s K. The increase of induced by silane addition seems to be mostly related to the large increase of the flame temperature which leads to higher energy release rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

BISON Development and Validation for Priority LWR-ATF concepts

Over the years, the Nuclear Energy Advanced Modeling and Simulation (NEAMS) (2015-2018, 2020) and Consortium for Advanced Simulation of Light Water Reactors (CASL) (2019) programs have provided support for development of Accident Tolerant Fuel (ATF) material models in the BISON fuel performance code. Since the beginning, the goal has been to utilize a multiscale modeling approach to gain a physical understanding of the fuel concepts of interest and to develop mechanistic models in the absence of a large amount of experimental data. This work builds upon that of previous years. In particular we present newly updated fission gas release models for both gas behavior in Cr 2 O 3 -doped UO 2 and U 3 Si 2 fuels, and a new creep model for U 3 Si 2 . The validation exercises completed last year are revisited with the latest models and the results updated. A brief summary of recent modeling activities for FeCrAl cladding is also provided.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1982

Photochemistry of the stratosphere of Venus - Implications for atmospheric evolution

The photochemistry of the Venus stratosphere is modeled using an updated and expanded chemical scheme along with the results of recent observations and laboratory studies. Three models, with H2 mixing ratio equal to 2 x 10 to the -5th, 5 x 10 to the -7th, and 1 x 10 to the -13th, respectively, are examined. All three models are found to satisfactorily account for the observations of CO, O2, O2(1Delta), and SO2 in the stratosphere, but only the last one may be able to account for the diurnal behavior of mesospheric CO and the UV albedo. Oxygen, derived from CO2 photolysis, is mainly consumed by CO2 recombination and oxidation of SO2 to H2SO4. The photolysis of HCl in the upper stratosphere provides a major source of odd hydrogen and free chlorine radicals, essential for the catalytic oxidation of CO. Oxidation of SO2 by O occurs in the lower stratosphere. The modeling reveals a number of interesting similarities, previously unsuspected between the chemistry of the stratosphere of Venus and that of the earth; photochemistry may have played a major role in the evolution of the atmosphere.

Yung, Y. L.↗
NASA NTRSDate not supplied

Optical Characterization of DebriSat Fragments in Support of Orbital Debris Environmental Models

The NASA Orbital Debris Program Office (ODPO) develops, maintains, and updates orbital debris environmental models, such as the NASA Orbital Debris Engineering Model (ORDEM), to support satellite designers and operators by estimating the risk from orbital debris impacts on their vehicles in orbit. Updates to ORDEM utilize the most recent validated datasets from radar, optical, and in situ sources to provide estimates of the debris flux as a function of size, material density, impact speed, and direction along a mission orbit. On-going efforts within the NASA ODPO to update the next version of ORDEM include a new parameter that highly affects the damage risk – shape. Shape can be binned by material density and size to better understand the damage assessments on spacecraft. The in situ and laboratory research activities at the NASA ODPO are focused on cataloging and characterizing fragments from a laboratory hypervelocity-impact test using a high-fidelity, mock-up satellite, DebriSat, in controlled and instrumented laboratory conditions. DebriSat is representative of present-day, low Earth orbit satellites, having been constructed with modern spacecraft materials and techniques. The DebriSat fragment ensemble provides a variety of shapes, bulk densities, and dimensions. Fragments down to 2 mm in size are being characterized by their physical and derived properties. A subset of fragments is being analyzed further in NASA’s Optical Measurement Center (OMC) using broadband, bidirectional reflectance measurements to provide insight into the optical-based NASA Size Estimation Model. Additionally, pre-impact spectral measurements on a subset of DebriSat materials were acquired for baseline material characterization. This paper provides an overview of DebriSat, the status of the project, and ongoing fragment characterization efforts within the OMC.

Heather M Cowardin↗
NASA NTRS2021

Optical Characterization of DebriSat Fragments in Support of Orbital Debris Environmental Models

The NASA Orbital Debris Program Office (ODPO) develops, maintains, and updates orbital debris environmental models, such as the NASA Orbital Debris Engineering Model (ORDEM), to support satellite designers and operators by estimating the risk from orbital debris impacts on their vehicles in orbit. Updates to ORDEM utilize the most recent validated datasets from radar, optical, and in situ sources to provide estimates of the debris flux as a function of size, material density, impact speed, and direction along a mission orbit. On-going efforts within the NASA ODPO to update the next version of ORDEM include a new parameter that highly affects the damage risk – shape. Shape can be binned by material density and size to better understand the damage assessments on spacecraft. The in situ and laboratory research activities at the NASA ODPO are focused on cataloging and characterizing fragments from a laboratory hypervelocity-impact test using a high-fidelity, mock-up satellite, DebriSat, in controlled and instrumented laboratory conditions. DebriSat is representative of present-day, low Earth orbit satellites, having been constructed with modern spacecraft materials and techniques. The DebriSat fragment ensemble provides a variety of shapes, bulk densities, and dimensions. Fragments down to 2 mm in size are being characterized by their physical and derived properties. A subset of fragments is being analyzed further in NASA’s Optical Measurement Center (OMC) using broadband, bidirectional reflectance measurements to provide insight into the optical-based NASA Size Estimation Model. Additionally, pre-impact spectral measurements on a subset of DebriSat materials were acquired for baseline material characterization. This paper provides an overview of DebriSat, the status of the project, and ongoing fragment characterization efforts within the OMC.

Heather M. Cowardin↗
DOE OSTI2022

Replicating HCCI-like autoignition behavior: What gasoline surrogate fidelity is needed?

This work seeks to characterize the fidelity needed in a gasoline surrogate with the intent to replicate the complex autoignition behavior exhibited within advanced combustion engines, and specifically Homogeneous Charge Compression Ignition (HCCI). A low-temperature gasoline combustion (LGTC) engine operating in HCCI mode and a rapid compression machine (RCM) are utilized to experimentally quantify fuel reactivity, through autoignition and preliminary heat release characteristics. Fuels considered include a research grade E10 U.S. gasoline (RD5-87), three multi-component surrogates (PACE-1, PACE-8, PACE-20), and a binary surrogate (PRF88.4). Each fuel was studied at lean/HCCI-like conditions covering a wide range of temperatures and pressures that are representative of naturally aspirated to high boost engine operation. Detailed chemical kinetic modeling is also undertaken using a recently updated gasoline surrogate kinetic model to simulate the RCM experiments and to provide chemical insight into surrogate-to-surrogate differences. The LGTC engine experiments demonstrate nearly identical reactivity between PACE-20 and RD5-87 across studied conditions, while faster phasing is seen for both PACE-1 and PACE-8 due to their stronger intermediate- and low-temperature heat release (ITHR/LTHR) at naturally aspirated and boosted conditions, respectively. The RCM experiments reveal typical low-temperature, negative temperature coefficient (NTC) and intermediate-temperature autoignition behaviors at all pressure conditions for RD5-87, which are qualitatively reproduced by all surrogates. Quantitative discrepancies in both autoignition and preliminary heat release are observed for all surrogates, while their ability to replicate RD5-87 autoignition behavior follows the order of PACE-20 > PACE-1 > PACE-8 > PRF88.4. Excellent mapping is obtained between the LGTC engine and the RCM, where the engine pressure-time trajectories can be characterized by the regimes represented by the RCM autoignition isopleths. The kinetic model performs commendably when simulating both autoignition and preliminary heat release of PACE-20, while typically overpredicting ignition delay times for PACE-1, PACE-8 and PRF88.4 at high-pressure and low-temperature/NTC conditions. Sensitivity and rate of production (ROP) analyses highlight surrogate-to-surrogate differences in the governing chemical kinetics where n-pentane initiates rapid OH branching at a faster rate and an earlier timing for PACE-20 than iso-pentane does for PACE-1 and PACE-8, making it computationally more reactive than the other surrogates. The current study highlights the need to include non-standardized properties, such as the lean/HCCI-like autoignition characteristics, in addition to ASTM properties (e.g., RON, MON) as metrics of fuel reactivity and targets to be matched when formulating high-fidelity surrogates that fully capture gasoline advanced combustion behavior such as HCCI-like autoignition.

42 ENGINEERING↗
DOE OSTI2023

Reliability modeling in a predictive maintenance context: A margin-based approach

Current system reliability methods (typically based on fault trees or reliability block diagrams) can effectively propagate reliability data from the asset to the system level in order to identify system critical points. However, employed asset reliability data are an approximated integral representation of the past industrywide operational experience, and they neglect the present asset health status (available, for example, from online monitoring data and diagnostic assessments) and forecasted health projection (when available from prognostic models). Asset health should be informed solely by that specific asset’s current and historical performance data and should not be an approximated integral representation of the past industrywide operational experience (as currently performed by system reliability models through Bayesian updating processes). Sensor data, diagnostic assessments, and prognostic assessments are in fact not considered in plant reliability models used to inform system engineers on the most critical assets. In addition, the propagation of quantitative health data from the asset to the system level is a challenge given the diverse nature and structure of health data elements (e.g., vibration spectra, temperature readings, expected failure time). Ideally, in a predictive maintenance context, system reliability models should support decision making by propagating available health information from the asset to the system level in order to provide a quantitative snapshot of system health and identify the most critical assets. Here, this paper is directly addressing these two goals by proposing a different approach for reliability modeling that relies on asset diagnostic and prognostic assessments, along with monitoring data to measure asset health. The propagation of health data from the asset to the system level is performed through fault tree models not in probability terms, but in terms of margin where margin is the “distance” between the present status and an undesired event (e.g., failure or unacceptable performance). Through a cause-effect lens, while classical reliability models target the effect associated with asset performance, a margin-based approach focuses on the cause of an undesired asset performance (i.e., its health). Hence, thinking of reliability in terms of margins implies decision-making based on causal reasoning. We will show how fault tree models can be solved using a margin language and how this process can effectively assist system engineers to identify the most critical assets.

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Pressure-temperature equation of state of Al 2 ⁢O 3 up to 14 Mbar and 40 kK

Sapphire (Al 2 ⁢O 3 ), known for its remarkable incompressibility at ambient conditions, plays a pivotal role in both static and dynamic compression research. Accurately characterizing its equation of state (EoS) is essential for these applications. Here, we present a complete Hugoniot of Al 2 ⁢ O 3 as locus of experimentally assessed, high-precision, pressure, density and temperature states up to 14 Mbar and 43 kK. The Hugoniot is established with single shock experiments using magnetically launched hyper velocity flyers on the Z Accelerator at Sandia National Laboratories. We explore principal Hugoniot states at very high shock 𝑇 and 𝑝 in the solid phase, tracking the solid-liquid boundary and culminating at 2.4-fold compression, where data provides a direct constraint on the liquid phase. Corresponding shock release data probe thermodynamic states complementary to the Hugoniot and place additional constraints on tabular EoS models. Our findings indicate a significant deviation from existing tabular EoS models for Al 2 ⁢ O 3 dictating a comprehensive overhaul. We develop two advanced EoSs for Al 2 ⁢ O 3 the SESAME 97412 model, featuring an extensive phase diagram that includes three solid phases and the liquid phase, and the updated LEOS 2200m2 model. EoS development is assisted with Quantum Molecular Dynamics simulations. Our experimental data allows for stringent testing of our EoSs. Both models accurately capture the Hugoniot of Al 2 ⁢O 3 up to the highest pressures and temperatures. Rigorous experimental determination of extreme pressures and temperatures, paired with sophisticated models, advances the frontier of EoS development beyond 1 terapascal.

Kalita, Patricia [Sandia National Laboratories (SN↗
DOE OSTI2024

HERO WEC V1.0 - WEC-Sim Model (July 2024)

**This submission supersedes submission MHKDR-483** This submission file contains the files that are needed to simulate NREL's HERO WEC (hydraulic and electric reverse osmosis wave energy converter). This requires the user to have already installed WEC-Sim. In addition to the standard toolboxes that are required to run WEC-Sim the user will also need the Simscape Fluids and Simscape Driveline packages. The zip file (HERO_V1_WECSim_2024.zip) contains the following: - HERO_HPTO_2024.slx: Simulink-based WEC Sim model of the first gen (V1.0) Hydraulic PTO (power take-off) that was designed for the HERO WEC. This model has been updated since submission #483 based on in-laboratory experimental results. - wecSimInputFile.m: Input file needed to run the model - userDefinedFunctionsMCR.m: MCR (multi condition run) script that is needed if a use wants to simulate multiple wave conditions. - geometry (folder): Includes the geometry file that is needed for visualization - hydroData (folder): Includes the required WAMIT data to run WEC-Sim -HydVisualization.mlx: Visualization script to plot simulation results (not needed to run)

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Validation and Verification of TEDS Facility HYBRID Modeling

The HYBRID modeling repository is an in-house developed library of models for selected integrated energy systems (IES) modelling. HYBRID models have been developed since 2015 to describe the physical operation of tightly coupled thermal systems including power generators, thermal transport systems, thermal storage, thermal-to-electric conversion systems, and other thermal applications. Here, validation and verification (V&V) capabilities are demonstrated using the Thermal Energy Distribution System (TEDS) at INL. Building upon prior work, the TEDS model has been updated and verified so that it better represents the installed system configuration and the operating control system. The model control system was changed to allow replication of actual experimental procedures. Experimental operations focusing primarily on thermocline tank performance were devised and performed. Several anomalies were found in the operation data of the experiment facility. V&V activities calibrating a selected input parameter are demonstrated on a single component as well as with a single parameter within the thermocline. Calibrating is then demonstrated on multiple components and a multi-parameter metric for the entire system. The validation methodology is successfully applied to validate the model with experimental data. It is also used to confirm a hypothesis behind one of the anomalies in experimental performance.

25 ENERGY STORAGE↗
NASA NTRS2011

Adaptive System Modeling for Spacecraft Simulation

This invention introduces a methodology and associated software tools for automatically learning spacecraft system models without any assumptions regarding system behavior. Data stream mining techniques were used to learn models for critical portions of the International Space Station (ISS) Electrical Power System (EPS). Evaluation on historical ISS telemetry data shows that adaptive system modeling reduces simulation error anywhere from 50 to 90 percent over existing approaches. The purpose of the methodology is to outline how someone can create accurate system models from sensor (telemetry) data. The purpose of the software is to support the methodology. The software provides analysis tools to design the adaptive models. The software also provides the algorithms to initially build system models and continuously update them from the latest streaming sensor data. The main strengths are as follows: Creates accurate spacecraft system models without in-depth system knowledge or any assumptions about system behavior. Automatically updates/calibrates system models using the latest streaming sensor data. Creates device specific models that capture the exact behavior of devices of the same type. Adapts to evolving systems. Can reduce computational complexity (faster simulations).

Thomas, Justin↗