Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model types”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Non-LTE, line-blanketed model atmospheres for late O- and early B-type stars

The use of non-LTE line-blanketed model atmospheres to analyze the spectra of hot stars is reported. The stars analyzed are members of clusters and associations, have spectral types in the range O9-B2 and luminosity classes in the range III-IV, have slow to moderate rotation, and are photometrically constant. Sampled line opacities of iron-group elements were incorporated in the radiative transfer solution; solar abundances were assumed. Good to excellent agreement is obtained between the computed profiles and essentially all the line profiles used to fix the model, and reliable stellar parameters are derived. The synthetic M II 5581 equivalent widths agree well with the observed ones at the low end of the temperature range studied, but, above 25,000 K, the synthetic line is generally stronger than the observed line. The behavior of the observed equivalent widths of N II, N III, C II and C III lines as a function of Teff is studied. Most of the lines show much scatter, with no consistent trend that could indicate abundance differences from star to star.

Grigsby, James A.↗
DOE OSTI2021

A Model for Atomic Precision p-Type Doping with Diborane on Si(100)-2×1

Diborane (B 2 H 6 ) is a promising molecular precursor for atomic precision p-type doping of silicon that has recently been experimentally demonstrated. In this study, we use density functional theory (DFT) calculations to determine the reaction pathway for diborane dissociating into a species that will incorporate as electrically active substitutional boron after adsorbing onto the Si(100)-2×1 surface. Our calculations indicate that diborane must overcome an energy barrier to adsorb, explaining the experimentally observed low sticking coefficient (<1 × 10 –4 at room temperature) and suggesting that heating can be used to increase the adsorption rate. Upon sticking, diborane has an ≈50% chance of splitting into two BH 3 fragments versus merely losing hydrogen to form a dimer such as B 2 H 4 . As boron dimers are likely electrically inactive, whether this latter reaction occurs is shown to be predictive of the incorporation rate. The dissociation process proceeds with significant energy barriers, necessitating the use of high temperatures for incorporation. Using the barriers calculated from DFT, we parameterize a Kinetic Monte Carlo model that predicts the incorporation statistics of boron as a function of the initial depassivation geometry, dose, and anneal temperature. Our results suggest that the dimer nature of diborane inherently limits its doping density as an acceptor precursor and furthermore that heating the boron dimers to split before exposure to silicon can lead to poor selectivity on hydrogen and halogen resists. This suggests that, while diborane works as an atomic precision acceptor precursor, other non-dimerized acceptor precursors may lead to higher incorporation rates at lower temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding the trade-offs of national municipal solid waste estimation methods for circular economy policy

Policies embracing circular economy concepts have taken hold in national legislation around the world. As the number of governments and organizations adopting circular economy policies increases, so does the need for accurate and timely measurement of material resource flows. Since many countries do not have access to centrally reported municipal solid waste (MSW) data, estimation and modeling are critical in evaluating circular economy policy effectiveness. The purpose of this paper is to examine three modeling approaches estimating national MSW data in the United States, including industry-based material flow analysis, waste-extended input-output modeling, and aggregated regional waste reporting. We establish five criteria to guide the analysis through the context of policy monitoring (data quality, flow totality, update frequency, sensitivity to disruption, and product granularity) and use these criteria to analyze and score each model. We then use a literature search to identify five, internationally-implemented options for circular economy policy and determine the data and modeling components that are most helpful in evaluating policy effectiveness. Finally, we provide a crosswalk of the model scores and policy needs to inform the suitability of model selection by policy type. We found that data quality and update frequency are identified as critical components for evaluating circular economy policies within the models evaluated, and can both be fulfilled by aggregated regional waste reporting. Flow totality, sensitivity to disruption, and product granularity requirements vary by both model and policy types. While none of the evaluated models satisfy the combination of requirements for any of the five policies, industry-based material flow analysis offers flow totality for extended producer responsibility, landfill bans, and recycling rate target policies that typically require it. Here, the waste-extended input-output model can provide disruption sensitivity and product granularity as needed for policies like minimum recycled content and market restrictions. Policy developers in areas where strong centralized data collection is not an option should design policy action(s) with modeling tradeoffs in mind, including the potential hybridization of modeling approaches that may provide the most accurate national MSW estimates.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Are we modeling the properties of unconventional shales correctly?

Technological advancements have led to impressive growth in hydrocarbon (HC) production from unconventional shale reservoirs. However, major limiting factors in shale gas development are i) low recovery of gas in place (<20%), (ii) a rapid decline in well productivity, iii) release of contaminants, despite the use of advanced hydraulic fracturing fluids and multiple fracturing stages. This is mainly due to a lack of understanding of the nanoscale physicochemical properties of shales, especially that of kerogen, the macromolecule that is not only the source of the majority of the HC’s in shales but also holds most of the HC’s in adsorbed state. Over the last few years, a large number of studies have been published on simulating the physicochemical properties of shale utilizing molecular models of kerogen. However, the molecular models of kerogen input into these simulations are based on the kerogen “type” derived from a very limited number of shale samples. In this paper, we examine the variations that can exist in kerogen structure within a particular kerogen “type” across different shale basins and single shale basin at similar thermal maturity levels. We propose that using kerogen “type” based structural models for molecular simulations could lead to inaccurate estimation of HC reserves, HC recovery, HC production, frackability, and quantity and quality of produced water. Our study highlights the need for developing a better classification of kerogen based on its “molecular structure” instead of “type” for a more accurate prediction of physicochemical properties of shales.

04 OIL SHALES AND TAR SANDS↗
NASA NTRS1986

Spectral mixture modeling - A new analysis of rock and soil types at the Viking Lander 1 site

A Viking Lander 1 image was modeled as mixtures of reflectance spectra of palagonite dust, gray andesitelike rock, and a coarse rocklike soil. The rocks are covered to varying degrees by dust but otherwise appear unweathered. Rocklike soil occurs as lag deposits in deflation zones around stones and on top of a drift and as a layer in a trench dug by the lander. This soil probably is derived from the rocks by wind abrasion and/or spallation. Dust is the major component of the soil and covers most of the surface. The dust is unrelated spectrally to the rock but is equivalent to the global-scale dust observed telescopically. A new method was developed to model a multispectral image as mixtures of end-member spectra and to compare image spectra directly with laboratory reference spectra. The method for the first time uses shade and secondary illumination effects as spectral end-members; thus the effects of topography and illumination on all scales can be isolated or removed. The image was calibrated absolutely from the laboratory spectra, in close agreement with direct calibrations. The method has broad applications to interpreting multispectral images, including satellite images.

Adams, J. B.↗
NASA NTRS1986

The synchrotron-maser theory of type II solar radio emission processes - The physical model and generation mechanism

A theory is proposed to explain the generation mechanism of type II solar radio bursts. It is suggested that the shock wave formed at the leading edge of a coronal transient can accelerate electrons. Because of the nature of the acceleration process, the energized electrons can possess a 'hollow-beam' type distribution function. When the electron beam propagates along the ambient magnetic field to lower altitudes and attains larger pitch angles, a synchrotron-maser instability can set in. This instability leads to the amplification of unpolarized or weakly polarized radiation. The present discussion incorporates a model which describes the ambient magnetic field and background plasma by means of MHD simulation. The potential emission regions may be located approximately, according to the time-dependent MHD simulation. Since the average local plasma frequency in the source region can be evaluated from the MHD model, the frequent drift associated with the radiation may be estimated. The result seems to be in good agreement with that derived from observations.

Wu, C. S.↗
NASA NTRS2008

Swarm Verification

Reportedly, supercomputer designer Seymour Cray once said that he would sooner use two strong oxen to plow a field than a thousand chickens. Although this is undoubtedly wise when it comes to plowing a field, it is not so clear for other types of tasks. Model checking problems are of the proverbial "search the needle in a haystack" type. Such problems can often be parallelized easily. Alas, none of the usual divide and conquer methods can be used to parallelize the working of a model checker. Given that it has become easier than ever to gain access to large numbers of computers to perform even routine tasks it is becoming more and more attractive to find alternate ways to use these resources to speed up model checking tasks. This paper describes one such method, called swarm verification.

grid computing↗
DOE OSTI2025

Search for dark matter produced in association with a Higgs boson decaying to a τ lepton pair in proton-proton collisions at $\sqrt{s}=13$ TeV

A search for dark matter particles produced in association with a Higgs boson decaying into a pair of τ leptons is performed using data collected in proton-proton collisions at a center-of-mass energy of 13 TeV with the CMS detector. The analysis is based on a data set corresponding to an integrated luminosity of 101 fb −1 collected in 2017–2018. No significant excess over the expected standard model background is observed. This result is interpreted within the frameworks of the 2HDM+a and baryonic Z′ benchmark simplified models. The 2HDM+a model is a type-II two-Higgs-doublet model featuring a heavy pseudoscalar with an additional light pseudoscalar. Upper limits at 95% confidence level are set on the product of the production cross section and the branching fraction for each of these two simplified models. Heavy pseudoscalar boson masses between 400 and 700 GeV are excluded for a light pseudoscalar mass of 100 GeV. For the baryonic Z′ model, a statistical combination is made with an earlier search based on a data set of 36 fb −1 collected in 2016. In this model, Z′ boson masses up to 1050 GeV are excluded for a dark matter particle mass of 1 GeV.

Dark Matter↗
DOE OSTI2021

Wide-blocky veins explained by dependency of crystal growth rate on fracture surface type: Insights from phase-field modeling

Vein microstructures contain a wealth of information on coupled chemical and mechanical processes of fracturing, fluid transport, and crystal growth. Numerical simulations have been used for exploring the factors controlling the development of vein microstructures; however, they have not been quantitatively validated against natural veins. Here we combined phase-field modeling with microtextural analysis of previously unexplained wide-blocky calcite veins in natural limestone and of the fresh fracture surface in this limestone. Results show that the wide-blocky vein textures can only be reproduced if ~10%–20% of crystals grow faster than the rest. This fraction corresponds to the amount of transgranularly broken grains that were observed on the experimental fracture surfaces, which are dominantly intergranular. We hypothesize that transgranular fractures allow faster growth of vein minerals due to the lack of clay coatings and other nucleation discontinuities that are common along intergranular cracks. Our simulation results show remarkable similarity to the natural veins and reproduce the nonlinear relationship between vein crystal width and vein aperture. This allows accurate simulations of crystal growth processes and related permeability evolution in fractured rocks.

Geology↗
DOE OSTI2023

Coupled SAM/Griffin Model of a Reference Pebble Bed High-Temperature Gas Cooled Reactor for Multi-Physics Simulations

An effort has been dedicated to developing a reference model for multi-physics coupled simulation of the pebble bed high-temperature gas-cooled reactor (PB-HTGR) with SAM and Griffin computer codes for safety analysis and licensing purpose. The reference problem of a prototypical reactor design serves as the foundation for the U.S. NRC (Nuclear Regulatory Commission) to verify the adequacy of computer codes and evaluation models for specific reactor types. In this work, a SAM model of the HTR-PM reactor has been developed based on publicly available design information and the multi-dimensional Pronghorn model developed by Idaho National Laboratory. The SAM HTR-PM model includes a multi-dimensional core region and 0- D/1-D fluid components. Additionally, a simplified air RCCS loop is modeled for decay heat removal. The Griffin model is based on a recent work by Idaho National Laboratory. The coupling between the models is achieved through the MOOSE MultiApp system. Both steady-state and transient scenarios were simulated to demonstrate the coupled model’s capability for multi-physics simulations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Not all types of secondary organic aerosol mix: two phases observed when mixing different secondary organic aerosol types

Abstract. Secondary organic aerosol (SOA) constitutes a large fraction of atmospheric aerosol. To assess its impacts on climate and air pollution, knowledge of the number of phases in internal mixtures of different SOA types is required. Atmospheric models often assume that different SOA types form a single phase when mixed. Here, we present visual observations of the number of phases formed after mixing different anthropogenic and biogenic SOA types. Mixing SOA types generated in environmental chambers with oxygen-to-carbon (O/C) ratios between 0.34 and 1.05, we found 6 out of 15 mixtures of two SOA types to result in two phase particles. We demonstrate that the number of phases depends on the difference in the average O/C ratio between the two SOA types (Δ(O/C)). Using a threshold Δ(O/C) of 0.47, we can predict the phase behavior of over 90 % of our mixtures, with one- and two-phase particles predicted for Δ(O/C)<0.47 and Δ(O/C)≥0.47, respectively. This threshold ΔO/C value provides a simple parameter to predict whether mixtures of fresh and aged SOA form one- or two-phase particles in the atmosphere. In addition, we show that phase-separated SOA particles form when mixtures of volatile organic compounds emitted from real trees are oxidized.

Mahrt, Fabian (ORCID:0000000270596765)↗
NASA NTRS1977

Over-the-wing model thrust reverser noise tests

Static acoustic tests were conducted on a 1/12 scale model over-the-wing target type thrust reverser. The model configuration simulates a design that is applicable to the over-the-wing short-haul advanced technology engine. Aerodynamic screening tests of a variety of reverser designs identified configurations that satisfied a reverse thrust requirement of 35 percent of forward thrust at a nozzle pressure ratio of 1.29. The variations in the reverser configuration included, blocker door angle, blocker door lip angle and shape, and side skirt shape. Acoustic data are presented and compared for the various configurations. The model data scaled to a single full size engine show that peak free field perceived noise (PN) levels at a 152.4 meter sideline distance range from 98 to 104 PNdb.

Goodykoontz, J.↗
NASA NTRS1976

Ductile fracture theories for pressurised pipes and containers

Two mechanisms of fracture are distinguished. Plane strain fractures occur in materials which do not undergo large-scale plastic deformations prior to and during a possible fracture deformation. Plane stress or high energy fractures are generally accompanied by large inelastic deformations. Theories for analyzing plane stress are based on the concepts of critical crack opening stretch, K(R) characterization, J-integral, and plastic instability. This last is considered in some detail. The ductile fracture process involves fracture initiation followed by a stable crack growth and the onset of unstable fracture propagation. The ductile fracture propagation process may be characterized by either a multiparameter (discrete) model, or some type of a resistance curve which may be considered as a continuous model expressed graphically. These models are studied and an alternative model is also proposed for ductile fractures which cannot be modeled as progressive crack growth phenomena.

Erdogan, F.↗
NASA NTRS1977

Over-the-wing model thrust reverser noise tests

Experimental results are presented for static acoustic tests of a 1/12 scale model over-the-wing target type thrust reverser. The model configuration simulates a design that is applicable to the over-the-wing short-haul advanced technology engine. Aerodynamic screening tests of a variety of reverser designs identified configurations that satisfied a reverse thrust requirement of 35 percent of forward thrust at a nozzle pressure ratio of 1.29. The variations in the reverser configuration included, blocker door angle, blocker door lip angle and shape, and side skirt shape. Acoustic data are presented and compared for the various configurations. The model data scaled to a single full size engine show that peak free field perceived noise levels at a 152.4 meter sideline distance range from 98 to 104 PNdB.

Goodykoontz, J.↗
NASA NTRS1986

Rotational modulation and flares on RS CVn and BY Dra-type stars. I - Photometry and spot models for BY Dra, AU Mic, AR Lac, II Peg and V 711 Tau (= HR 1099)

Multicolor wide-band photometry of five active stars is presented. The observations were carried out at several places before, during and after the period of IUE observations for the purpose of determining the location, sizes, and evolution of photospheric spots at the time when chromospheric, transition region, and coronal activity data were obtained from UV and radio observations. II Peg, BY Dra, and AU Mic show fairly stable quasi-sinusoidal light curves, while AR Lac and V 711 Tau show double-peaked light curves. For V 711 Tau, a remarkable evolution of the spotted area extent and/or longitude distribution is found. Small, but definite color variations that are consistent with the cool spot hypothesis have also been detected for BY Dra, II Peg and V 711 Tau.

Rodono, M.↗
NASA NTRS1989

On the large-eddy simulation of transitional wall-bounded flows

The structure of the subgrid scale fields in plane channel flow has been studied at various stages of the transition process to turbulence. The residual stress and subgrid scale dissipation calculated using velocity fields generated by direct numerical simulations of the Navier-Stokes equations are significantly different from their counterparts in turbulent flows. The subgrid scale dissipation changes sign over extended areas of the channel, indicating energy flow from the small scales to the large scales. This reversed energy cascade becomes less pronounced at the later stages of transition. Standard residual stress models of the Smagorinsky type are excessively dissipative. Rescaling the model constant improves the prediction of the total (integrated) subgrid scale dissipation, but not that of the local one. Despite the somewhat excessive dissipation of the rescaled Smagorinsky model, the results of a large eddy simulation of transition on a flat-plate boundary layer compare quite well with those of a direct simulation, and require only a small fraction of the computational effort. The inclusion of non-dissipative models, which could lead to further improvements, is proposed.

Piomelli, Ugo↗