Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixture experiment models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Remote Sensing of Aerosol Water Fraction, Dry Size Distribution and Soluble Fraction Using Multi-Angle, Multi-Spectral Polarimetry

A framework to infer volume water fraction, soluble fraction and dry size distributions of fine mode aerosol from multi-angle, multi-spectral polarimetry retrievals of column-averaged ambient aerosol properties is presented. The method is applied to observations of the Research Scanning Polarimeter (RSP) obtained during two NASA aircraft campaigns, namely the Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment (ACTIVATE) and the Cloud, Aerosol, and Monsoon Processes-Philippines Experiment (CAMP2Ex). All aerosol retrievals are statistically evaluated using in situ data. Volume water fraction is inferred from the retrieved ambient real part of the refractive index, assuming a dry refractive index of 1.54 and by applying a volume mixing rule to obtain the effective ambient refractive index. The uncertainties in inferred volume water fraction resulting from this simplified model are discussed and estimated to be lower than 0.2 and decreasing with increasing volume water fraction. The daily mean retrieved volume water fractions correlate well with the in situ values with a mean absolute difference of 0.09. Polarimeter-retrieved ambient effective radius for daily data is shown to increase as a function of volume water fraction as expected. Furthermore, the effective variance of the size distributions also increases with increasing effective radius, which we show is consistent with an external mixture of soluble and insoluble aerosol. The relative variations of effective radius and variance over an observation period are then used to estimate the soluble fraction of the aerosol. Daily results of soluble fraction correlate well with in situ observed sulfate mass fraction with a correlation coefficient of 0.79. Subsequently, inferred water and soluble fractions are used to derive dry fine-mode size distributions from their ambient counterparts. While dry effective radii obtained in situ and from RSP show similar ranges, in situ values are generally substantially smaller during the ACTIVATE deployments, which may be due to biases in RSP retrievals or in the in situ observations, or both. Both RSP and in situ observations indicate the dominance of aerosol with low hygroscopicity during the ACTIVATE and CAMP2Ex campaigns. Furthermore, RSP indicates a high degree of external mixing of particles with low and high hygroscopicity. These retrievals of fine mode water volume fraction and soluble fraction may be used for the evaluation of water uptake in atmospheric models. Furthermore, the framework allows to estimate the variation in the concentration of fine-mode aerosol larger than a specific dry radius limit, which can be used as a proxy for the variation in cloud condensation nucleus concentrations. This framework may be applied to multi-angle, multi-spectral satellite data expected to be available in the near future.

Bastiaan Van Diedenhoven↗

Effect of Pre-reaction Ball Milling on Kinetics of Lanthanum Phosphate Roasting with Sodium Carbonate

To design economic roasting processes for the recovery of rare earth phosphates from coal-derived feedstocks, it is convenient to study model systems of rare earth phosphate plus a reactant. In this work, the kinetics of the high-temperature roasting of lanthanum phosphate with sodium carbonate were studied. It is typically necessary to heat the reaction mixture above the melting point of Na 2 CO 3 (851 °C) to observe appreciable reaction to form La 2 O 3 . Furthermore, grinding the reactants reduces the necessary temperature to as low as 625 °C. It is believed that this increase in reactivity occurs because the ball milling process reduces the reactant particle size in addition to ensuring that the reaction mixture is thoroughly mixed. XRD hot stage results suggest a two-reaction mechanism is the route by which La 2 O 3 is produced from the ball milled sample upon reaction. Apparent activation energy and Arrhenius prefactor for each reaction were determined from TGA experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-state thermodynamics and the possibility of a liquid-liquid phase transition in supercooled TIP4P/2005 water

Water shows intriguing thermodynamic and dynamic anomalies in the supercooled liquid state. One possible explanation of the origin of these anomalies lies in the existence of a metastable liquid-liquid phase transition (LLPT) between two (high and low density) forms of water. While the anomalies are observed in experiments on bulk and confined water and by computer simulation studies of different water-like models, the existence of a LLPT in water is still debated. Unambiguous experimental proof of the existence of a LLPT in bulk supercooled water is hampered by fast ice nucleation which is a precursor of the hypothesized LLPT. Moreover, the hypothesized LLPT, being metastable, in principle cannot exist in the thermodynamic limit (infinite size, infinite time). Therefore, computer simulations of water models are crucial for exploring the possibility of the metastable LLPT and the nature of the anomalies. In this work, we present new simulation results in the NVT ensemble for one of the most accurate classical molecular models of water, TIP4P/2005. To describe the computed properties and explore the possibility of a LLPT, we have applied two-structure thermodynamics, viewing water as a non-ideal mixture of two interconvertible local structures (“states”). The results suggest the presence of a liquid-liquid critical point and are consistent with the existence of a LLPT in this model for the simulated length and time scales. We have compared the behavior of TIP4P/2005 with other popular water-like models, namely, mW and ST2, and with real water, all of which are well described by two-state thermodynamics. In view of the current debate involving different studies of TIP4P/2005, we discuss consequences of metastability and finite size in observing the liquid-liquid separation. We also address the relationship between the phenomenological order parameter of two-structure thermodynamics and the microscopic nature of the low-density structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fuel Kinetic Effects on Pre-Spark Heat Release and Engine Knock Limit

This study focuses on the ability of chemical mechanisms to describe the recently discovered phenomena of pre-spark heat release (PSHR) due to low-temperature chemistry. Experiments were conducted at fixed air and fuel flow rates for a range of intake temperature that spanned the threshold for PSHR. It was found that when PSHR occurred, the knock-limited combustion phasing was insensitive to intake temperature. A three-zone model using full chemistry was used to investigate the phenomenon with both a detailed and skeletal chemical kinetic mechanism. Both mechanisms predicted the presence of PSHR. The skeletal mechanism was found to more faithfully reproduce the experimentally observed phasing of the PSHR with intake temperature at the two speeds investigated. The model results showed that end gas heat released was observed even for conditions for which the PSHR was not observed, i.e., the low temperature heat release in the end gas was obscured by the deflagration heat release. The chemical change to the unburned zone would affect both the mixture flame sped and autoignition characteristics. The model results were used to explore regions where PSHR would be found.

Gilliam, Arthur↗

Testing for Controlled Rapid Pressurization

Borehole W1 is a NQ core hole drilled at our test site in Socorro. The rock is rhyolite. Borehole W1 which was used to test gas-gas explosive mixtures is 55 feet deep with casing (pinkish in the drawing) set to 35 feet. The model is a representation of the borehole and the holes we cored around the central borehole after the test. The brown colored core holes showed dye when we filled W1 with water and slightly pressurized it. This indicates there was some path between W1 and the colored core hole. The core holes are shown to their TD in the drawing. The green plane is a fracture plane which we believe is the result of the explosions of the gas mixture in W1. Data resource is a 2D .pdf Solid Works Drawing of borehole W1.

15 GEOTHERMAL ENERGY↗

B{sub s1}(5830) and B{sub s2}*(5840)

In this paper we investigate the strong decays of the two newly observed bottom-strange mesons B{sub s1}(5830) and B{sub s2}{sup *}(5840) in the framework of the quark pair creation model. The two-body strong decay widths of B{sub s1}(5830){sup 0}{yields}B*{sup +}K{sup -} and B{sub s2}*(5840){sup 0}{yields}B{sup +}K{sup -}, B*{sup +}K{sup -} are calculated by considering B{sub s1}(5830) to be a mixture between |{sup 1}P{sub 1}> and |{sup 3}P{sub 1}> states, and B{sub s2}*(5840) to be a |{sup 3}P{sub 2}> state. The double pion decay of B{sub s1}(5830) and B{sub s2}{sup *}(5840) is supposed to occur via the intermediate state {sigma} and f{sub 0}(980). Although the double pion decay widths of B{sub s1}(5830) and B{sub s2}*(5840) are smaller than the two-body strong decay widths of B{sub s1}(5830) and B{sub s2}*(5840), one suggests future experiments to search the double pion decays of B{sub s1}(5830) and B{sub s2}*(5840) due to their sizable decay widths.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solid Surface Combustion Experiment Completes a Series of Eight Successful Flights

The Solid Surface Combustion Experiment (SSCE) was the first combustion experiment to fly in the space shuttle and the first such experiment in the NASA spaceflight program since Skylab. SSCE was actually a series of experiments designed to begin to characterize flame spreading over solid fuels in microgravity and the differences of this flame spreading from normal gravity behavior. These experiments should lead to a better understanding of the physical processes involved--increasing our understanding of fire behavior, both in space and on Earth. SSCE results will help researchers evaluate spacecraft fire hazards. These experiments were conceived by the principal investigator, Professor Robert A. Altenkirch, Dean of Engineering at Washington State University. In the first five flights, the fuel sample--ashless filter paper instrumented with three thermocouples--was mounted in a sealed chamber filled with a 50-percent or 35-percent mixture of oxygen in nitrogen at pressures of 1.0, 1.5, and 2.0 atm. In the next three flights, a polymethyl methacrylate (plexiglass) fuel was instrumented with three thermocouples and tested in a 70-percent or 50-percent mixture of oxygen and nitrogen at pressures of 1.0 and 2.0 atm. SSCE is a self-contained, battery-operated experiment that can be flown either in the shuttle middeck or in the Spacelab module. More information about the hardware configuration have been published. This past year, the final two of eight flights were completed on STS-64 and STS-63. The NASA Lewis Research Center designed and built the SSCE payload and performed engineering, testing, scientific, and flight operations support. The SSCE project was supported in some way by nearly every major sector of Lewis' organization. Professor Altenkirch developed a numerical simulation of the flame-spreading process from first principles (of fluid mechanics, heat transfer, and reaction kinetics). The spread rates, flame shape, and thermodynamic data from the SSCE flights are being compared directly with the results of the computational model. Results from the eight flights will be used to formulate an improved solid-phase pyrolysis model. In addition, some results of the flights have been published and presented at international combustion symposiums. Additional solid fuel combustion experiments are being investigated for future tests with the existing hardware.

Source record↗

Analysis of heat transfer and AuNPs-mediated photo-thermal inactivation of E. coli at varying laser powers using single-phase CFD modeling

In the wake of the COVID-19 pandemics, the demand for innovative and effective methods of bacterial inactivation has become a critical area of research, providing the impetus for this study. The purpose of this research is to analyze the AuNPs-mediated photothermal inactivation of E. coli. Gold nanoparticles irradiated by laser represent a promising technique for combating bacterial infection that combines high-tech and scientific progress. The intermediate aim of the work was to present the calibration of the model with respect to the gold nanorods experiment. The purpose of this work is to study the effect of initial concentration of E. coli bacteria, the design of the chamber and the laser power on heat transfer and inactivation of E. coli bacteria. Using the CFD simulation, the work combines three main concepts. 1. The conversion of laser light to heat has been described by a combination of three distinctive approximations: a- Discrete particle integration to take into account every nanoparticle within the system, b- Rayleigh-Drude approximation to determine the scattering and extinction coefficients and c- Lambert–Beer–Bourger law to describe the decrease in laser intensity across the AuNPs. 2. The contribution of the presence of E. coli bacteria to the thermal and fluid-dynamic fields in the microdevice was modeled by single-phase approach by determining the effective thermophysical properties of the water-bacteria mixture. 3. An approach based on a temperature threshold attained at which bacteria will be inactivated, has been used to predict bacterial response to temperature increases. The comparison of the thermal fields and temporal temperature changes obtained by the CFD simulation with those obtained experimentally confirms the accuracy of the light-heat conversion model derived from the aforementioned approximations. The results show a linear relationship between maximum temperature and variation in laser power over the range studied, which is in line with previous experimental results. It was also found that the temperature inside the microchamber can exceed 55 °C only when a laser power higher than 0.8 W is used, so bacterial inactivation begins. The experimental data allows to determinate the concentration of nanoparticles. This parameter is introduced into the mathematical model obtaining the same number of AuNPs. However, this assumption introduces a certain simplification, as in the mathematical model the distribution of nanoparticles is uniform. This work is directly connected to the use of gold nanoparticles for energy conversion, as well as the field of bacterial inactivation in microfluidic systems such as lab-on-a-chip. Presented mathematical and numerical models can be extended to the entire spectrum of wavelengths with particular use of white light in the inactivation of bacteria. This work represents a significant advancement in the field, as to the best of the authors’ knowledge, it is the first to employ a single-phase computational fluid dynamics (CFD) approach specifically combined with the thermal inactivation of bacteria. Moreover, this research pioneers the use of a numerical simulation to analyze the temperature threshold of photothermal inactivation of E. coli mediated by gold nanorods (AuNRs). The integration of these methodologies offers a new perspective on optimizing bacterial inactivation techniques, making this study a valuable contribution to both computational modeling and biomedical applications.

36 MATERIALS SCIENCE↗

Gas-Phase Influence on Quasisteady "Liquid Flames" in Gravitational Fields

We consider the SHS (self-propagating high-temperature synthesis) process for synthesizing materials. In this process a powder mixture of reactants is cold pressed into a sample, which is ignited at one end. A high temperature combustion wave then propagates through the sample converting reactants to the desired product material. In this process, melting of some or all the components is often observed. Therefore, we study combustion waves propagating through a high caloricity inorganic powder mixture whose combustion temperature exceeds the melting temperatures of many components. The solid matrix is thus destroyed by the propagating combustion wave due to melting ahead of the reaction zone, and a liquid bath is formed which contains gaseous bubbles. The waves propagate in the presence of a gravitational field. Due to the effect of gravity, there is relative motion between the rising bubbles and the descending bath, which affects the composition of the medium, its thermophysical properties, the 'liquid flame' structure, and the propagation velocity. To enhance our understanding of phenomena associated with the interaction of the relative motion with the propagating combustion wave we formulate and analyze a relatively simple mathematical model of liquid flames in a gravitational field. We describe the wave structure and combustion characteristics including the combustion velocity. We compare our results to existing experimental observations and suggest new experiments to be performed. We consider the effects of gravity and, in particular, examine both microgravity and large gravity conditions.

Shkadinsky, K. G.↗

Identifying the Interactions That Allow Separation of O 2 from N 2 on the Open Iron Sites of Fe 2 (dobdc)

The presence of open metal sites along with a high porosity makes the Fe 2 (dobdc) metal–organic framework, also called Fe-MOF-74, particularly well suited for separating gaseous mixtures. For instance, since Fe 2 (dobdc) adsorbs O 2 more strongly than N 2 , it can, in principle, be used to separate O 2 from air [Bloch et al., J. Am. Chem. Soc. 2011, 133, 14814]. Here, in the present work, we investigate the reversible differential adsorption of N 2 and O 2 on Fe 2 (dobdc) with Kohn-Sham density functional theory applied to an 88-atom cluster model of the MOF. The cluster is chosen such that it is large enough to allow an accurate description of the most important contributions to the binding enthalpies and small enough to perform high-level quantum mechanical calculations. For the quantum mechanical calculations, we use well-validated exchange–correlation functionals to study the ground-state structures of the Fe–N 2 and Fe–O 2 interacting systems. The calculations agree with experiment in that O 2 binds more strongly than N 2 , and they reveal that the ground-state structure of the Fe–O 2 subsystem has the dioxygen unit in a triplet spin state ferromagnetically coupled to the high-spin state (quintet state) of the iron center. Charge Model 5 (CM5) calculations have been performed to determine the partial atomic charges on the adsorbate molecules and the iron atom, and they show that charge transfer from the open iron(II) site is more important in the case of O 2 than in the case of N 2 . Furthermore, bond orders, vibrational frequencies, and orbital energies were calculated to rationalize the stronger binding of O 2 compared to N 2 on Fe 2 (dobdc).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical galaxy cluster detection across a wide redshift range

The past decade is one of the most exciting period in the history of physics and astronomy. The discovery of cosmic acceleration dramatically changed our understanding about the evolution and constituents of the Universe. To accommodate the new acceleration phase into our well established Big Bang cosmological scenario under the frame work of General Relativity, there must exist a very special substance that has negative pressure and make up about 73% of the total energy density in our Universe. It is called Dark Energy. For the first time people realized that the vast majority of our Universe is made of things that are totally different from the things we are made of. Therefore, one of the major endeavors in physics and astronomy in the coming years is trying to understand, if we can, the nature of dark energy. Understanding dark energy cannot be achieved from pure logic. We need empirical evidence to finally determine about what is dark energy. The better we can constrain the energy density and evolution of the dark energy, the closer we will get to the answer. There are many ways to constrain the energy density and evolution of dark energy, each of which leads to degeneracy in certain directions in the parameter space. Therefore, a combination of complimentary methods will help to reduce the degeneracies and give tighter constraints. Dark energy became dominate over matter in the Universe only very recently (at about z ~ 1.5) and will affect both the cosmological geometry and large scale structure formation. Among the various experiments, some of them constrain the dark energy mainly via geometry (such as CMB, Supernovae) while some others provides constraints from both structures and geometry (such as BAO, Galaxy Clusters) Galaxy clusters can be used as a sensitive probe for cosmology. A large cluster catalog that extends to high redshift with well measured masses is indispensable for precisely constraining cosmological parameters. Detecting clusters in optical bands is very efficient. Multi-color CCD photometry allows combined detection and redshift estimation for clusters across broad redshift ranges. However, the lack of precise information about galaxy positions along the line of sight leads to contamination by projection, which plagues both cluster detection and the measurement of their properties. The dominance of red sequence galaxies, tightly clustered along the E/S0 ridgeline, provides a powerful method for de-projecting field galaxies. We developed an Error Corrected Gaussian Mixture Model to fit the galaxies color distribution around clusters by taking into account the measurement errors. By this technique, we can detect the red sequence color clustering and extract unbiased information about the evolution of the red sequence ridgeline and its width. Precision measurements of ridgelines yields better estimates of cluster richness and possibly their dynamical state, leading to better estimates of cluster mass. By using the red sequence clustering in color space identified from the Error Corrected Gaussian Mixture Model, together with the projected NFW filter in the projected RA/DEC plane, we developed a new and efficient cluster finding algorithm that can reliably detect galaxy clusters across the redshift range from 0.1 to 1.4. We have also run the cluster finder on legacy SDSS DR7 data and assembled an approximately volume limited cluster catalog across redshifts from 0.1 to 0.5. The algorithm has been tested against a Monte Carlo mock catalog, showing the identified clusters are highly complete and pure. With the completion of this thesis, we build the first and essential step towards precision cluster cosmology. Meanwhile, the large optical cluster catalog across a wide redshift range makes possible the systematic and detailed investigation of cluster formation and evolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ab Initio Modeling of Aqueous Methanol Mixtures at DFT-SCAN Level Using Machine Learning Interatomic Potentials

Abstract Methanol–water mixtures find use in many applications, particularly catalytic energy conversion processes. Their importance has motivated numerous computational studies, most of which employed molecular dynamics based on classical force fields. These enable simulations of large systems on long time scales but do not reliably describe reactive dynamics involving bond breaking and bond formation. In contrast, ab initio molecular dynamics (AIMD) based on density functional theory (DFT) is generally more reliable for such applications but has a high computational cost, which discourages systematic studies of alcohol-water mixtures. To remedy this, we trained a machine learning interatomic potential capable of probing the properties of aqueous methanol mixtures at the DFT level using the SCAN functional. Our results show that SCAN qualitatively reproduces multiple key experimental features arising from the amphiphilic nature of methanol, including density, diffusion coefficients, X-ray structure factors, and Kirkwood–Buff integrals. We also find that structural correlations between water molecules are somewhat overestimated, leading to a stronger preferential association than that predicted by experiments. However, increasing the temperature by 30 K mitigates this effect and also recovers the correct mobilities of both methanol and water. These results indicate that SCAN provides an accurate description of methanol–water mixtures, making it a reliable choice for investigating the reactive dynamics in such systems.

Park, Sanghyun J. [Princeton University , , , ,]↗

A Mixture Evolution Scenario of the AGN Radio Luminosity Function. II. Do Low- and High-power Radio-loud AGNs Evolve Differently?

Following previous work, we further confirm that the cosmic evolution of steep-spectrum radio-loud AGNs (active galactic nuclei) can be reproduced by a simple combination of density evolution (DE) and luminosity evolution (LE). This mixture evolution scenario can naturally explain the luminosity-dependent evolution of radio-loud AGNs. Our models successfully fitted a large amount of data on radio luminosity functions of steep-spectrum sources and multi-frequency source counts. The modeling indicates that the DE slowly increases as (1+z){sup 0.3∼1.3} out to z∼0.8, and then rapidly decreases as (1+z){sup −6.8∼−5.7}, while the LE rapidly increases as (1+z){sup 4.8} out to a higher redshift (at least z>3.5). We find a high-redshift decline (i.e., redshift cutoff) in the number density of steep-spectrum radio sources, but we cannot conclude whether such a decline is sharp or shallow. We believe that whether a redshift cutoff occurs or not depends mainly on DE, while its steepness is decided by LE, which, however, cannot be well constrained due to the lack of high-redshift samples. Most intriguingly, according to our mixture evolution scenario, there appears to be no need for different evolution for the low- and high-power radio-loud AGNs. Both types of sources experience the same combined evolution of DE and LE.

79 ASTRONOMY AND ASTROPHYSICS↗

Statistical Analysis in Support of Control Fuel Temperature for the Advanced Gas Reactor Experiments

There are four completed tests among a series of Advanced Gas Reactor (AGR) irradiation experiments that are being conducted within the Advanced Reactor Technologies (ART) Fuel Development and Qualification Program. The main objectives of the fuel experimental campaigns are to provide the necessary data on fuel performance to support fuel process development, qualify a fuel design and fabrication process for normal operation and hypothetical accident conditions, and support development and validation of fuel performance and fission product transport models and codes.1 Since this tristructural isotropic fuel is qualified to be used in high temperature gas-cooled reactors (HTGRs), it is essential that the testing conditions of fuel irradiations are designed to mimic those in the conceptual gas reactors. As a result, temperatures of the AGR test fuel have to be maintained within a specified range that is typical of the HTGRs. In each AGR capsule, the test fuel temperature is controlled independently using a variable fraction neon and helium gas mixture that fills the gap volume for each capsule. The temperature as measured by a thermocouple (TC) terminated in the graphite holder (which houses fuel compacts) is used as a feedback for the gas flow controllers. Direct temperature measurement for fuel compacts is not possible because contact between a TC head and fuel particle could lead to undesirable failures. Therefore, an ABAQUS based finite element thermal model was created to predict the daily average fuel temperatures during the entire irradiation period.2,3 It is well-known that extended exposure to neutron irradiation and high temperatures leads to changes in geometries of fuel compacts and graphite holder, which result in changes of the gas gap leading to a change in the relationship between TC and fuel temperatures. In addition, TCs are also expected to drift and sometimes fail under irradiation conditions. These facts make maintaining test fuel temperature within a specified range challenging. This paper describes how the regression analysis methods are used in conjunction of calculated fuel temperatures from early irradiation periods (when irradiation effect is relatively small) to effectively control fuel temperature for the remaining irradiation, when irradiation effect became profound. This is particularly important in the event of all TCs in a capsule fail.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experimental and modeling studies of a biofuel surrogate compound: laminar burning velocities and jet-stirred reactor measurements of anisole

Lignocellulosic biomass is a promising alternative fuel source which can promote energy security, reduce greenhouse gas emissions, and minimize fuel consumption when paired with advanced combustion strategies. Pyrolysis is used to convert lignocellulosic biomass into a complex mixture of phenolic-rich species that can be used in a transportation fuel. Anisole (or methoxybenzene) can be used as a surrogate to represent these phenolic-rich species. Anisole also has attractive properties as a fuel component for use in advanced spark-ignition engines because of its high blending research octane number of 120. Presented in the current work are new measurements of laminar burning velocities, jet-stirred reactor (JSR) speciation of anisole/O 2 /N 2 mixtures, and the development and validation of a detailed chemical kinetic mechanism for anisole. Homogeneous, steady state, fixed gas temperature, perfectly stirred reactor CHEMKIN simulations were used to validate the mechanism against the current JSR measurements and published JSR experiments from CNRS-Nancy. Pyrolysis and oxidation simulations were based on the experimental reactant compositions and thermodynamic state conditions including P = 1 bar and T = 675–1275 K. The oxidation compositions studied in this work span fuel-lean (φ = 0.5), stoichiometric, and fuel rich (φ = 2.0) equivalence ratios. Laminar burning velocities were measured on a heat flux stabilized burner at an unburnt T = 358 K, P = 1 bar and simulated using the CHEMKIN premixed laminar flame speed module. Ignition delay times of anisole were then simulated at conditions relevant to advanced combustion strategies. Current laminar burning velocity measurements and predicted ignition delay times were compared to gasoline components (e.g., n-heptane, iso-octane, and toluene) and gasoline surrogates to highlight differences and similarities in behavior. Reaction path analysis and sensitivity analysis were used to explain the pathways relevant to the current studies. Under pyrolysis and oxidative conditions, unimolecular decomposition of anisole to phenoxy radicals and methyl radicals was found to be important due to the relatively low bond strength between the oxygen and methyl group, ~65 kcal/mol. Finally, reactions of these abundant phenoxy radicals with O 2 were found to be critical to accurately reproduce anisole's reactivity.

10 SYNTHETIC FUELS↗

First observation of increased DT yield over prediction due to addition of hydrogen

Here, in a number of reported instances, implosions utilizing fuel mixtures have resulted in anomalously low fusion yields below those predicted by radiation-hydrodynamics simulations. Inter-species ion diffusion has been suggested as a possible cause of the observed yield degradation in fuel mixture implosions. An experimental platform utilizing hydro-equivalent deuterium–tritium (DT), deuterium–tritium–hydrogen (DTH), and deuterium-tritium-helium3 (DT 3 He) capsule implosions was developed to determine whether the inter-species ion diffusion theory may describe the resulting fuel mixture implosion behavior. The implosion experiments were performed at the Omega laser facility. X-ray images and shell areal density diagnostics results show that the hydro-equivalent three capsules (DT, DTH, and DT 3 He) have similar compression behavior. However, nuclear yield deviation was observed from the scaling determined using a fusion yield formula. In the DT 3 He mixture, a reduced yield of a factor of 0.65 ± 0.13 was observed, which is similar to a yield reduction observed in D 3 He mixture by Rygg et al. (i.e., Rygg effect). In contrast, in the DTH mixture, a factor of 1.17 ±0.15 yield increase was observed, which we named the inverse Rygg effect. The yield increase observed in the DTH mixture is consistent with the inter-species ion diffusion theory where lighter H diffuses away from the core and concentrated DT in the core produces higher yield. An inter-species ion diffusion model, the Zimmerman–Paquette–Kagan–Zhdanov model, implemented in a Lagrangian radiation-hydrodynamics fluid code, was also used to analyze the present data, without the need to assume hydrodynamic equivalence of the capsules, but it does not completely explain the DTH or DT 3 He capsules although its effects are in the correct direction. Simulation-based Bayesian inference was used in the latter analysis to quantify the uncertainty in the numerical simulations. The simulation-based analysis resulted in an inferred Rygg-effect yield decrease factor of 0.91 ± 0.02 for the DT 3 He mixture, and an inferred inverse-Rygg yield increase factor of 1.21 ± 0.04 for the DTH mixture, based on simulations ignoring ion diffusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cosmological consequences of Yukawa-unified SUSY with mixed axion/axino cold and warm dark matter

Supersymmetric models with t-b-{tau} Yukawa unification at M{sub GUT} qualitatively predict a sparticle mass spectrum including first and second generation scalars at the 3-15 TeV scale, third generation scalars at the (few) TeV scale and gluinos in the sub-TeV range. The neutralino relic density in these models typically turns out to lie far above the measured dark matter abundance, prompting the suggestion that instead dark matter is composed of an axion/axino mixture. We explore the axion and thermal and non-thermal axino dark matter abundance in Yukawa-unified SUSY models. We find in this scenario that (i) rather large values of Peccei-Quinn symmetry breaking scale f{sub a} {approx} 10{sup 12} GeV are favored and (ii) rather large values of GUT scale scalar masses {approx} 10-15 TeV allow for the re-heat temperature T{sub R} of the universe to be T{sub R} {approx}> 10{sup 6} GeV. This allows in turn a solution to the gravitino/Big Bang Nucleosynthesis problem while also allowing for baryogenesis via non-thermal leptogenesis. The large scalar masses for Yukawa-unified models are also favored by data on b {yields} s{gamma} and B{sub s} {yields} {mu}{sup +}{mu}{sup -} decay. Testable consequences from this scenario include a possible axion detection at axion search experiments, but null results from direct and indirect WIMP search experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

Laser Absorption Spectroscopy Measurements of Post-Shock Non-Equilibrium Species in the NASA Ames Electric Arc Shock Tube

The NASA Ames Electric Arc Shock Tube (EAST) is a unique facility capable of generating high enthalpy, shock-heated impulse gas flows representative of the kinetic and radiative conditions encountered by atmospheric entry vehicles. The facility maintains a successful history with emission spectroscopy, providing measurements of absolute radiance upon which various validation studies are anchored. The central objective of this work is to develop a comprehensive tunable diode laser absorption spectroscopy (TDLAS) sensing capability to provide complementary experimental insights to existing emission techniques. More specifically, a fast-scanning TDLAS-based diagnostic targeting the cyano radical (CN) in the near-infrared(near-IR) near 926.6 nm is employed in mixtures of 2.2% CH4in N2by mole for a sweep of incident shock velocities ranging 3.0-5.5 km/s and fill pressures 0.3-1.15 Torr. Laser scan rates up to 500 kHz probe multiple absorption features to provide quantitative measurements of temperature and species number density profiles behind the incident shock. In all instances, the temperature trend is consistent between emission-inferred and TDLAS-inferred measurements. However, at the lower-velocity conditions, there is an appreciable offset between the Data Parallel Line Relaxation Code (DPLR) simulation and experimental measurements. A similar behavior is observed in number density profiles, with emission measurements providing inferences of the CN(B) and CN(A) state, while TDLAS measurements provide an additional inference of the CN(X) state. In the fast-scanned experiments, measurement inferred number densities suggest a much faster production of CN at early times than captured by the model. This discrepancy motivates ongoing, additional spectroscopic and kinetics CN experiments to resolve the accuracy of modeling assumptions.

Efaine Chang↗