Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “methods in superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

A general numerical analysis of the superconducting quasiparticle mixer

For very low noise millimeter-wave receivers, the superconductor-insulator-superconductor (SIS) quasiparticle mixer is now competitive with conventional Schottky mixers. Tucker (1979, 1980) has developed a quantum theory of mixing which has provided a basis for the rapid improvement in SIS mixer performance. The present paper is concerned with a general method of numerical analysis for SIS mixers which allows arbitrary terminating impedances for all the harmonic frequencies. This analysis provides an approach for an examination of the range of validity of the three-frequency results of the quantum mixer theory. The new method has been implemented with the aid of a Fortran computer program.

Hicks, R. G.↗
NASA NTRS1992

Superconductive Coplanar-Waveguide Filters

Coplanar-waveguide microwave low-pass filters based on thin films of high-critical-temperature superconductor YBa2Cu3O7 built and tested. Designed to provide passband of 0 to 9.5 GHz. Dimensions suitable for microwave integrated circuits and chosen to provide fairly stringent test of usefulness and practicality of design and of method of fabrication. Insertion loss less than filter made with copper.

Chew, Wilbert↗
DOE OSTI2021

Visualizing quasiparticles from quantum entanglement for general one-dimensional phases

In this work, we present a quantum information framework for the entanglement behavior of the low-energy quasiparticle (QP) excitations in various quantum phases in one-dimensional (1D) systems. We first establish an exact correspondence between the correlation matrix and the QP entanglement Hamiltonian for free fermions and find an extended in-gap state in the QP entanglement Hamiltonian as a consequence of the position uncertainty of the QP. A more general understanding of such an in-gap state can be extended to a Kramers theorem for the QP entanglement Hamiltonian, which also applies to strongly interacting systems. Further, we present a set of ubiquitous entanglement spectrum features, dubbed entanglement fragmentation, conditional mutual information, and measurement-induced nonlocal entanglement for QPs in 1D symmetry protected topological phases. Our result thus provides another framework to identify different phases of matter in terms of their QP entanglement.

1-dimensional spin chains↗
DOE OSTI2020

Revealing Hidden Orbital Pseudospin Texture with Time-Reversal Dichroism in Photoelectron Angular Distributions

We performed angle-resolved photoemission spectroscopy (ARPES) of bulk 2H-WSe 2 for different crystal orientations linked to each other by time-reversal symmetry. We introduce a new observable called time-reversal dichroism in photoelectron angular distributions (TRDAD), which quantifies the modulation of the photoemission intensity upon effective time-reversal operation. We demonstrate that the hidden orbital pseudospin texture leaves its imprint on TRDAD, due to multiple orbital interference effects in photoemission. Our experimental results are in quantitative agreement with both the tight-binding model and state-of-the-art fully relativistic calculations performed using the one-step model of photoemission. While spin-resolved ARPES probes the spin component of entangled spin-orbital texture in multiorbital systems, we unambiguously demonstrate that TRDAD reveals its orbital pseudospin texture counterpart.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Accurate parameterization of the kinetic energy functional

The absence of a reliable formulation of kinetic energy density functional has hindered the development of orbital free density functional theory. Using the data-aided learning paradigm, we propose a simple prescription to accurately model the kinetic energy density of any system. Our method relies on a dictionary of functional forms for local and nonlocal contributions which have been proposed in the literature and the appropriate coefficients are calculated via a linear regression framework. To model the nonlocal contributions, we explore two new nonlocal functionals - a functional that captures fluctuations in electronic density and a functional that incorporates gradient information. Since, the analytical functional forms of the kernels present in these nonlocal terms are not known from theory, we propose a basis function expansion to model these seemingly difficult nonlocal quantities. This allows us to easily reconstruct kernels for any system using only a few structures. The proposed method is able to learn kinetic energy densities and total kinetic energies of molecular and periodic systems, such as H 2 , LiH, LiF and a one-dimensional chain of 8 hydrogens using data from Kohn-Sham density functional theory calculations for only a few structures. For the ease of reproduction, codes used to generate the models are provided in the supporting materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Anelasticity and Phase Transition During Ramp-Release in Tin

This study examines the qualitative features of an anelasticity model associated with the bowing of dislocations in the presence of phase transition. A simple physically plausible mechanism is introduced to describe the interaction of anelasticity and the transformation. Varying the anelastic parameters results in strong differences in the deviatoric stress response. The model is applied to study the behavior of tin (Sn) and compared to data from ramp driven compression-release experiments. Tin exhibits a complex phase diagram within a relatively accessible range of temperature and pressures and the characterization of its phases is considered an open problem with significant scientific merit. The coupling between anelasticity, plasticity, and phase transformation contributes to release wave features traditionally associated with the phase transition effect alone suggesting the importance of accounting for the effects jointly. Posterior distributions of the plastic and anelastic parameters are computed using Bayesian-inference-based methods, further highlighting the importance of anelasticity in this regime.

36 MATERIALS SCIENCE↗
DOE OSTI2021

van der Waals corrected density functionals for cylindrical surfaces: Ammonia and nitrogen dioxide adsorbed on a single-walled carbon nanotube

In this work, we extend the damped Zaremba-Kohn model (dZK) for long-range dispersion interaction between a molecule and a planar surface to molecules adsorbed on a curved cylindrical surface, and employ this extended model as an additive correction to the semilocal density functionals PBE (Perdew-Burke-Ernzerhof) and SCAN (strongly constrained and appropriately normed). The resulting PBE+vdW (van der Waals)-dZK and SCAN+vdW-dZK are applied to two systems, NH3 and NO2 molecules adsorbed on a single-wall carbon nanotube (CNT), for calculations of binding energies and equilibrium distances. For comparison, the results from vdW nonlocal functionals, such as SCAN+rVV10 and PBE+rVV10, are also presented. The binding energies from PBE+rVV10 (Vydrov and Van Voorhis), SCAN+rVV10, PBE+vdW-dZK, and SCAN+vdW-dZK are about 70–115 meV for the system of CNT + NH 3 and 300–500 meV for the system of CNT + NO 2 . The results from PBE+vdW-dZK and SCAN+vdW-dZK are closer to each other than those from PBE+rVV10 and SCAN+rVV10 are. The relatively closer results from PBE+vdW-dZK and SCAN+vdW-dZK indicate the consistency of our developed vdW–dZK model for cylindrical surfaces. All methods, including PBE, SCAN, PBE+rVV10, SCAN+rVV10, PBE+vdW-dZK, and SCAN+vdW-dZK, give approximately the same binding energy differences between two adsorption configurations (types I and II) for the two systems. This implies that the two adsorption sites have approximately the same adsorption stability. The exponent of the vdW interaction power law from our vdW-dZK model for the two systems is about 0 at short distance, largely due to the damping factor, and tends slowly to –4 to –4.5 at distances D about 20–50 Å. At even larger distances, the vdW power-law exponent approaches –5. This feature is very similar to the one calculated with random-phase approximation and renormalization group approaches, supporting the applicability of our methods. Our developed vdW-dZK method provides a highly efficient and reliable method for large systems with cylindrical surfaces, such as vdW interactions with nanotubes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Electronic structure of LaNiO 2 and CaCuO 2 from a self-consistent vertex-corrected GW approach

In this work, the electronic structure of one of the nickelates (LaNiO 2 ) and one of the cuprates (CaCuO 2 ) is studied with three self-consistent GW-based methods: scGW, sc(GW+vertex), and quasiparticle self-consistent GW. Low-energy features obtained in our study are in many respects similar to the features reported in previous density functional theory plus dynamical mean-field theory (DFT+DMFT) studies. Consistent with the DFT+DMFT conclusion, we find LaNiO 2 to be more correlated than CaCuO 2 . However, correlation effects included in our study change the DFT Fermi surface near the Γ point differently from that reported in DMFT studies. Features that are a few electronvolts away from the Fermi level are broader in our calculations than in the DFT+DMFT, which reflects the differences between the DFT and the GW methods. Our results are in qualitative agreement with previous G0W0 results, but the self-consistency results in quantitative differences. Generally, correlation effects are found to be sufficiently weak in both materials, which allows one to use totally ab initio diagrammatic approaches such as sc(GW+Vertex) and to avoid the methods with adjustable parameters (DFT+U or DFT+DMFT). However, the possibility of some strong correlations at low energy that cannot be captured by perturbative methods cannot be completely excluded. For instance, differences in the Fermi surface should be resolved, thus experimental studies are necessary.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Can High Current Density HTS Magnets be Quench Protected Using Methods Used to Protect High Current Density LTS Magnets?

In the 1970s the Lawrence Berkeley Laboratory (LBL) was testing high current density magnets where the EJ 2 limit was up to two orders of magnitude higher than the quench protection methods of the period would permit at the time. LBL was designing a high current density (J) thin solenoid with a large volume and stored energy (E). The accepted EJ 2 limit at the time was ~10 23 J A 2 m -4 . In order to exceed the EJ 2 limit by two orders of magnitude, one had to greatly increase the quench protection voltages (V) and magnet current (I). In 1977, LBL tested four quench protection methods on a 2-meter diameter high current density solenoid with a stored energy of 2 MJ. Three of these quench protection methods worked well, but the fourth didn't appear to work. These methods will be discussed as to whether they can be applied to HTS or MgB 2 high current density magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Development of electro-optical quantum transducers based on three-dimensional superconducting cavities

Quantum transducers enable the conversion of quantum information and signals between different physical platforms. Based on the pioneering works in three-dimensional superconducting cavity technology developed at Fermilab, we are advancing the development of three-dimensional microwave-optical transducers and exploring their applications in quantum information processing and sensing. We present our progress in the design, fabrication, and characterization of three-dimensional microwave cavities integrated with bulk lithium niobate resonators. The material characterization using three-dimensional cavities based on a resonant-type method allows for understanding of complex permittivity and loss mechanism of electro-optic materials at cryogenic temperatures. We also evaluate the potential of the high-efficiency quantum transducers in enhancing the performance of quantum sensors for applications such as dark matter detection, compared to conventional homodyne detection approaches. This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC0207CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics. This work is funded by the DOE's Early Career Research Program. This research used resources of the U.S. Department of Energy, Office of Science, National Quantum Information Science Research Centers, Superconducting Quantum Materials and Systems Center (SQMS) under Contract No. DE-AC02-07CH11359.

Zorzetti, Silvia↗
DOE OSTI2025

Enhancing spectroscopy and microscopy with emerging methods in photon correlation and quantum illumination

Quantum optics has led to important advancements in our ability to prepare and detect correlations between individual photons. Its principles are increasingly translated into nanoscale characterization tools, furthering methods in spectroscopy, microscopy and metrology. Here, in this Review, we discuss the rapid progress in this field driven by advanced technologies of single-photon detectors and quantum-light sources, including time-resolved single-photon counting cameras, superconducting nanowire single-photon detectors and entangled photon sources of increasing brightness. We emphasize emerging applications in super-resolution microscopy, measurements below classical noise limits and photon-number-resolved spectroscopy—a powerful paradigm for the characterization of nanoscale electronic materials. We conclude by discussing key technological challenges and future opportunities in materials science and bionanophotonics alike.

Tsao, Chieh [University of California, Berkeley, C↗
DOE OSTI2025

Impact of Resonator-Assisted ZZ Cancellation on Cross-Resonance Gate Performance

Strong coupling in superconducting processors enables fast two-qubit gates but also produces static ZZ interactions that degrade performance. Flux-tunable couplers can suppress ZZ but introduce flux noise and additional hardware complexity. A driven-resonator RIP interaction offers a simple method to dynamically cancel ZZ [1]. Using this RIP-based cancellation scheme in a fixed-frequency transmon system, we compare cross-resonance gate behavior with and without ZZ suppression. Idling errors improve substantially when ZZ is cancelled, while CR calibration reveals clear tradeoffs in Hamiltonian composition and achievable gate speed. [1]: Huang, Z. et al. (2024). Physical Review Applied, 22(3), 034007.

Heidler, Paul [Fermilab]↗
NASA NTRS1966

Continuous magnetic flux pump

A method and means for altering the intensity of a magnetic field by transposing flux from one location to the location desired fro the magnetic field are examined. The device described includes a pair of communicating cavities formed in a block of superconducting material, is dimensioned to be insertable into one of the cavities and to substantially fill the cavity. Magnetic flux is first trapped in the cavities by establishing a magnetic field while the superconducting material is above the critical temperature at which it goes superconducting. Thereafter, the temperature of the material is reduced below the critical value, and then the exciting magnetic field may be removed. By varying the ratios of the areas of the two cavities, it is possible to produce a field having much greater flux density in the second, smaller cavity, into which the flux transposed.

Hildebrandt, A. F.↗
DOE OSTI2024

Deriving Effective Coupling Strength With Born-Oppenheimer Approx.

The development of high-fidelity quantum gates is paramount to the scalability of quantum pro- cessors. Tunable couplers have played a key role in the realization of these low error rate quantum gates in superconducting circuits. However, the derivation of the effective coupling strength between the qubits is usually enabled by a Schrieffer-Wolff transformation, which is complex and requires prior-knowledge of the proper generator for the transformation. We propose a simpler method of obtaining this effective coupling using an approach similar to the Born-Oppenheimer approximation.

Wichmann, Conrad↗
DOE OSTI2024

Deriving Effective Coupling Strength with Born-Oppenheimer Approximation

The development of high-fidelity quantum gates is paramount to the scalability of quantum processors. Tunable couplers have played a key role in the realization of these low error rate quantum gates in superconducting circuits. However, the derivation of the effective coupling strength between the qubits is usually enabled by a Schrieffer-Wolff transformation, which is complex and requires prior-knowledge of the proper generator for the transformation. We propose a simpler method of obtaining this effective coupling using an approach similar to the Born-Oppenheimer approximation.

Wichmann, Conrad↗
DOE OSTI2024

Systems and methods for resolving a number of incident RF-range photons

A photon-number-resolving detector comprises a detection element, an ohmmeter, and a hardware logic component. The detection element can be formed from a Weyl or Dirac semimetal. Electrons of the detection element are characterized by a surface state that exhibits a Dirac cone and a bulk superconducting state that exhibits a bandgap. When photons having energies less than the bandgap of the bulk superconducting state impinges on the detection element, the photons can be absorbed by electrons of the detection element that are characterized by the surface state. The ohmmeter outputs resistance data indicative of an electrical resistance of the detection element while the photons impinge on the detection element. The hardware logic component can determine, based upon the resistance data, a number of the photons that are absorbed by the surface state electrons of the detection element.

Soh, Daniel Beom Soo↗
DOE OSTI2022

Prediction of strain, inter-layer interaction and critical current in CORC ® wires under axial strain by T-A modeling

Superconducting conductors on round core (CORC ® ) cables and wires can meet the needs of large high-field magnets, such as particle accelerators and compact nuclear fusion machines, due to their simple cabling process, high current-carrying capacity and reliable operation under high mechanical stresses. Many high-field magnets require CORC ® cables to carry a current of thousands of amperes in a background magnetic field exceeding 20 T. As a result, the large electromagnetic forces will deform the cable in the axial direction due to hoop stress and in the transverse direction by compressive stress. Therefore, it is essential to determine the irreversible deformation limit of the CORC ® cable under axial tensile load and optimize the cabling parameters to potentially extend this limit. Analytical and numerical methods are developed to assess the performance degradation of CORC ® wires under axial tensile load. The strain level, interlayer contact pressure and friction and their impact on the critical current are calculated by combining the mechanical response and the T-A method. Analyzing the results shows that the winding angle of the tape and the Poisson’s ratio of the inner core are key factors affecting the irreversible tensile strain limit of CORC ® wires. The smaller the winding angle and the higher the Poisson’s ratio of the inner core, the higher the irreversible tensile strain limit. For multi-layer CORC ® wires, the initial contact pressure caused by the cabling process must also be considered. The inter-layer interaction is coupled with the tape strain of each layer. The results of this research can serve as a basis for optimizing and designing CORC ® wires with extended irreversible strain limits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2011

The Impact of Standard Semiconductor Fabrication Processes on Polycrystalline Nb Thin Film Surfaces

Polycrystalline superconducting Nb thin films are extensively used for submillimeter and millimeter transmission line applications and, less commonly, used in microwave kinetic inductance detector (MKID) applications. The microwave and mm-wave loss in these films is impacted, in part, by the presence of surface nitrides and oxides. In this study, glancing incidence x-ray diffraction was used to identify the presence of niobium nitride and niobium monoxide surface layers on Nb thin films which had been exposed to chemicals used in standard photolithographic processing. A method of mitigating the presence of ordered niobium monoxide surface layers is presented. Furthermore, we discuss the possibility of using glancing incidence x-ray diffraction as a non-destructive diagnostic tool for evaluating the quality of Nb thin films used in MKIDs and transmission lines. For a given fabrication process, we have both the x-ray diffraction data of the surface chemistry and a measure of the mm-wave and microwave loss, the latter being made in superconducting resonators.

superconducting films↗