Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “magma”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Regional chemical setting of the Apollo 16 landing site and the importance of the Kant Plateau

Orbital X-ray data from the Apollo 16 region indicate that physiographic units identified before the lunar mission can be classified as chemical units as well. The Descartes Mountains, however, appear to be an extension of the Kant Plateau composition that is unusually anorthositic and resembles farside terra. The Cayley Plains have closer affinities to basaltic materials than terra materials, physically, spectrally and chemically. The Theophilus impact, 330 km east of the landing site, excavated magnesium-rich basalts from below less-magnesian flows in Mare Nectaris; but, mafic ejecta was substantially blocked from the Apollo 16 site by the Kant Plateau that rises 5 km above the level of the mare. Apollo 16 soil samples from stations selected to collect either Descartes Mountains material or Cayley Plains material were surprisingly similar. However, they do, indeed, show the chemical trends indicative of the two units as defined by the orbiting geochemistry detectors. The Kant Plateau and Descartes Mountains material may be among the rare nearside examples of a plagioclase-rich cumulate of the primordial magma ocean.

Andre, C. G.↗

Small particles in plumes of Mount St. Helens

Particles in the size range 0.1-25 microns were sampled by aircraft carrying a quartz crystal microcascade in the Mount St. Helens plume on three dates in August and September 1980. Two of the sampling dates represented 'typical' emissions of the volcano between plinian eruptions. One sampling flight was made 1-4 hours before the small plinian eruption of August 7, 1980 when the plume had become discontinuous and visibly darker. The plume sampled on August 7, before the eruption, contained mainly approximately 2-micron diameter silicic glass particles, fragments of the Mount St. Helens magma. The typical plumes sampled on September 22 and August 6 had much smaller concentrations of particles, trimodal size distributions with peaks at 10, 0.4, and 0.1 microns. The particles were largely nonsilicate and apparently represented Cu-Zn oxide (10 micron peak), Al sulfate, chloride, and oxide, and sulfuric acid (smallest size peak).

Rose, W. I.↗

Volcanism and igneous processes in small icy satellites

Evidence for the production of endogenic processes of the small Saturnian satellites by igneous activity of low melting point NH3-H2O magma heated radiogenically is presented. An initial state of the inner satellites is modeled as a homogeneous mixture of particulate silicates and ices. Conductive transport is assumed to have either combined with heat capacity in a mixture of crystalline phases, or to have been reduced by the presence of dust, defects, vitreous or amorphous phases, and clathrates. The extent to which a eutectic melt could form is calculated in terms of the volume percentage of melt, with all heating above 175 K going toward overcoming the latent heat of the eutectic mix. Mimas and Enceladus were treated as free from radiogenic heat sources, which were significant for Tethys, Dione, Rhea, and Iapetus. The migrations of inner materials to form surface structures and seal off the interiors of the moons are described.

Stevenson, D. J.↗

A preliminary analysis of lunar extra-mare basalts - Distribution, compositions, ages, volumes, and eruption styles

Extra-mare basalts occupy 8.5% of the lunar basalt area and comprise 1% of the total mare basalt volume. They are preferentially located where the crust is thin and topographically low. In terms of age, eruption style, and composition they are as variable as the mare basalts. In some instances extrusion in extra-mare craters was preceded by floor-fracturing whereas in other cases it apparently was not. The volume of lava erupted may have been controlled more by the volume of magma produced than by hydrostatic effects. A minimum of nearly 1300 separate basalt eruptions is indicated; the true value could be nearer 30,000 separate eruptions.

Whitford-Stark, J. L.↗

Lithospheric thinning associated with rifting in East Africa

The rate of ascent of the thermal perturbation of eruptive rock types in the Kenya Dome region can be calculated for depths of origin ranging from greater than 170 km to the lower crust (25-30 km) as combined with dated occurrences. An equation is derived and solved iteratively for ascent velocity at 10 km depth intervals from 150-30 km, assuming a thermal diffusivity of 1 sq mm/sec. For radii of 50 and 100 km and constant gradient increases within the range 55-60 C/km over the lithosphere-asthenosphere boundary (LAB) ascent depth range, the calculated rate of upwelling corresponds well with the results of a simple thermal model of lithospheric thinning. A 1 C/km change in gradient results approximately in a 0.55 Myr change in ascent time from 150 to 30 km, due to the increasing differential between the geotherm and the solidus with decreasing depths and the increasing rate of heat loss to the surface. It is suggested by the temporal-spatial-compositional relations of eruptives in the Kenya Dome region that there is a shallowing of magma source regions with time, implying encroachment of a thermal anomaly.

Wendlandt, R. F.↗

Numerical simulation of crystal fractionation in shergottite meteorites

Cumulus clinopyroxenes in the Shergotty and Zagami meteorites suggest crystal fractionation occurred, possibly by gravitative settling. Numerical models of this process in a nonconvecting environment argue that the small phenocrysts can segregate only under extreme conditions of cooling time or gravitational field strength. Since textures indicate that cooling time was not excessive, a large (planetary) g is required by these models, in agreement with other suggestions that the shergottite parent body may be Mars. Other calculations indicate that it is extremely difficult to produce the observed textures in a convecting environment, unless crystal setting occurred in a quiescent zone at the bottom of the magma chamber.

Grimm, R. E.↗

Sulfide saturation of basalt and andesite melts at high pressures and temperatures

When the sulfur content of an Fe-bearing magma exceeds the saturation limit for the bulk composition, an immiscible iron sulfide melt fraction separates. For an understanding of the geochemistry of sulfur-bearing magmatic systems, more information is needed regarding the solubility of metal sulfide in silicate melt at its source and the solubility changes as a function of changing intensive and extensive variables. In the present investigation, the sulfur saturation surface is determined for the pressure range from 12.5 to 30 kbar and the temperature range from 1300 to 1460 C for three silicate melt compositions representing a range of SiO2 and FeO compositions.

Wendlandt, R. F.↗

Sixth foray for pristine nonmare rocks and an assessment of the diversity of lunar anorthosites

A compositional and petrographic characterization of 11 nonmare samples shows five to be pristine, and four probably pristine. Five of the 11 are unique anorthosites that considerably extend the diversity of lunar anorthosites. Alkali anorthosites are rich in incompatible elements. The nature of the correlations between longitude and such parameters as Eu and Sm concentrations, and Sc/Sm, Ti/Sm, and Ca/Na ratios, has been elucidated for the case of the pristine samples because five are fro a western site (Apollo 14). The ratios determined for the ferroan anorthosite 14312c are close to normal, but significantly displaced in the direction of the nonferroan, western pristine rocks. This suggests that the composition-longitude relationships are as old as the late stages of the crystallization of the putative magma ocean.

Warren, P. H.↗

Importance of the Lu-Hf isotopic system in studies of planetary chronology and chemical evolution

The Lu-176-Hf-176 isotope method and its applications in earth sciences are discussed with regard to planetary-evolution studies. From new data on basalts from oceanic islands, Hf-176/Hf-177 and Nd-143/Nd-144 are found to display a single linear isotopic variation in the suboceanic mantle, whereas considerable divergences occur in Hf-176/Hf-177-Sr-87/Sr-86 and Nd-143/Nd-144-Sr87/Sr-86 diagrams. With the acquisition of further Hf-Sr-Nd isotopic data, these discordant Sr-87/Sr-86 relationships may allow a distinction between processes such as mantle metasomatism, influence of sea-water altered material in the magma source, or recycling of sediments into the mantle. The best quality Hf isotope data are obtained from granitoid or zircons, and are most suitable for studying ancient terrestrial Hf isotopic variations. Lu-Hf is shown to be a viable method for dating ancient terrestrial and extraterrestrial samples, but is unlikely to find wide application in pure chronological studies because it offers little advantage over existing methods.

Patchett, P. J.↗

Beginning and end of lunar mare volcanism

The distribution and characteristics of the early phases of mare vulcanism on the moon are discussed. Breccias have been observed that indicate the presence of magma flows before 3900 Myr BP. A mafic feature has been identified in more than 100 craters at least 1 km across. The absence of buried mare surfaces on the nearside and western hemispheres is attributed to ejecta deposits, and farside basins with no mare fill are suggested to have experienced early mare flooding. Photographs of the bright-rayed Lichtenberg crater have revealed that mare volcanism occurred within the time frame 1700-2000 Myr BP. It is concluded that the moon featured two periods of igneous activity, the last happening at 1000 Myr BP, and beginning 4300 BP.

Schultz, P. H.↗

A comparison of volcanic eruption processes on earth, moon, Mars, Io and Venus

The physical, chemical, and atmospheric characteristics of the silicate planets and satellites are surveyed in terms of their effects on the volcanic evolution of the surfaces of these bodies. The equations relating the parameters affecting magma ascent through the crust and eruption are analyzed, and three major types of eruption are characterized: effusive, steady explosive, and unsteady explosive. This analytical framework is then used to predict the nature of volcanic activity on each of the planets and satellites, and the predictions are compared with actual observations. Outstanding problems are discussed, with emphasis on the need for a general model of planetary interior dynamics applicable to bodies with varying degrees of interior viscosity, mantle activity, and lithospheric plate tectonics.

Wilson, L.↗

Olivine flotation and settling experiments on the join Mg2SiO4-Fe2SiO4

Results are presented of a study of some unusual density relations between olivine and coexisting liquid in the system fosterite-fayalite. At 1 atmosphere pressure it is found that olivine floats on its coexisting liquid for intermediate compositions on this binary because of extreme partitioning of Fe into the melt phase. At 20 kilobars, the usual behavior of olivine settling is found to occur because the partitioning of Fe in the melt is reduced, aided possibly by the dissolution of CO2 in the melt from the use of a graphite container. It is determined that olivine flotation and settling are rapid in a time period of only a few hours because viscosities are slightly greater than that of paraffin oil at room temperature. Some adcumulate textures with good triple junction grain boundaries are found to be developed. Observations of differentiated magmatic systems suggest that the mechanisms by which magmas can differentiate vary considerably in the ultramafic to tholeiitic compositional range.

Herzberg, C. T.↗

Solidus and liquidus temperatures and mineralogies for anhydrous garnet-lherzolite to 15 GPa

Strong convergence is noted, in experimental data for systems pertaining to anhydrous fertile garnet-lherzolite in the 6.5-15 GPa range, either to a common temperature or to temperatures differing by only about 100 C. The major element composition of magmas generated by even minor degrees of partial melting may be similar to the composition of the primordial, bulk silicate earth in an upper mantle stratigraphic column more than 160 km deep. Whether or not the solidus and liquidus intersect, the liquidus mineralogy for undepleted garnet-lherzolite compositions is found to change from olivine, at low pressures, to pyroxene, garnet, or a solid solution of both, at pressures greater than 10-15 GPa.

Herzberg, C. T.↗

An analytical and experimental study of zoning in plagioclase

A detailed electron microprobe study has been conducted on natural and experimentally grown zoned plagioclase feldspars. Discontinuous, sector, and oscillatory chemical zoning are observed superimposed on continuous normal or reverse zoning trends. The relative accuracy of 3 element (Na, Ca, K) microprobe traverses was found statistically to be 2 mole percent. Comparison of microprobe data on natural zoned plagioclase with zoned plagioclase grown in controlled experiments has shown that it may be possible to distinguish zonal development resulting from physio-chemical changes to the bulk magma from zoning related to local kinetic control on the growth of individual crystals.

Smith, R. K.↗

Preliminary discussion on the origin of Lei-gong-mo (tektites)

The specimens of lei-gong-mo (tektites) were collected from Hainan Island and Leizhow Peninsula during the period from 1963 to 1975. The distribution, forms, sculpture, abration surface (bald spot), internal structure and chemical composition of lei-gong-mo are discussed. Studies of these materials lead to the following conclusions: (1) the specimens of lei-gong-mo can be morphologically divided into eight types; (2) the sculptures on the surface of lei-gong-mo are probably due to the corrosion effect of volcanic gas, and the abration surface due to the aerodynamic corrosion; (3) the folded structures in the layered lei-gong-mo (Muong Nong-type tektite) seem hardly to be formed by an impact of meteorites, but they might be produced in the magma flow process when the lei-gong-mo was melting within the crater vent; and (4) the comparison of its chemical composition with that of basalt from Hainan Island does not show that lei-gong-mo came from the local volcano. The hypothesis of the lunar volcanic origin of tektites is examined.

Baoyin, Y.↗

Origin of the Moon: In search of the holy grail

The Moon's origin could be deduced with certainty if its bulk chemistry were known. However, determination of this chemistry is difficult because of the profound and complex redistribution of elements that occurred in the outer portions of the Moon during crystallization of the magma ocean. The compositions of 23 varieties of volcanic glass, erupted from depths approaching 300 miles, were used to predict the chemistry of a special glass (genesis glass) having a direct link to primordial lunar matter. A sample of glass with the predicted composition was discovered. This allows a new estimate to be made of the Moon's bulk composition. The data indicate that the Moon shares some intriquing chemical similarities with the Earth's mantle. Both genesis glass and lunar gas are furnishing definitive data on the Moon's composition and origin.

Delano, J. W.↗

Impact basins and the volcanics of Mars

The distribution fracture patterns of old Martian impact basins were studied. The basaltic plains on the Moon generally occur inside or around impact craters and basins and it is believed that fractures generated by large impacts provided long lasting pathways for magmas. The volcanic plains and volcanic edifices on Mars which show a complex distribution are the interiors of the most obvious old basins are largely buried by wind blown deposits. The Martian ridged plains that most resemble the lunar maria typically are offset from such impact basins. The origin of the mare like plains offset and the placement of the large volcanic mountains are discussed.

Schultz, P. H.↗

Was the early Earth completely molten?

The nature of the interior of the primitive Earth was examined. The question is posted: was the Earth a cold solid or was it a hot liquid, much like a lava lakes seen in today's volcanic cauldrons. The various energy sources available to heat the primitive Earth to see if they are sufficient to cause melting were analyzed. The two largest contributors to the Earth's early heat appear to be the heat due to accretion and the heat of core formation. The Earth formed by the accretion of particles ranging in size from millimeters to hundreds of kilometers and each impact into the protoearth provided more energy to heat the body. It is found that early in the Earth's history, the sinking of iron to the center of the Earth to form the core released a substantial amount of energy; enough to heat the entire Earth an average 2000 deg C. Mechanisms for the removal of such a large amount of heat appear inadequate to prevent substantial melting, and it is assumed that the Earth was completely molten, i.e., a magma ocean at one time early in its history.

Turcotte, D. L.↗