Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interval analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Time scales and variability of area-averaged tropical oceanic rainfall

A statistical analysis of time series of area-averaged rainfall over the oceans has been conducted around the diurnal time scale. The results of this analysis can be applied directly to the problem of establishing the magnitude of expected errors to be incurred in the estimation of monthly area-averaged rain rate from low orbiting satellites. Such statistics as the mean, standard deviation, integral time scale of background red noise, and spectral analyses were performed on time series of the GOES precipitation index taken at 3-hour intervals during the period spanning December 19, 1987 to March 31, 1988 over the central and eastern tropical Pacific. The analyses have been conducted on 2.5 x 2.5 deg and 5 x 5 deg grid boxes, separately. The study shows that rainfall measurements by a sun-synchronous satellite visiting a spot twice per day will include a bias due to the existence of the semidiurnal cycle in the SPCZ ranging from 5 to 10 percentage points. The bias in the ITCZ may be of the order of 5 percentage points.

Shin, Kyung-Sup↗
NASA NTRS1990

Characterization of a thermally imidized soluble polyimide film

A soluble aromatic poly(amic acid) film was converted to a soluble polyimide by staging at 25 deg intervals to 325 C and characterized at each interval by several analytical methods. The behavior observed was consistent with an interpretation that a reduction occurred in molecular weight of the poly(amic acid) during the initial stages of cure before the ultimate molecular weight was achieved as a polyimide. This interpretation was supported by the results of solution viscosity, gel permeation chromatography, low angle laser light scattering photometry and infrared spectroscopy analysis. The results serve to increase the fundamental understanding of how polyimides are thermally formed from poly(amic acids).

Young, Philip R.↗
NASA NTRS1992

Sea surface velocities from visible and infrared multispectral atmospheric mapping sensor imagery

High resolution (100 m), sequential Multispectral Atmospheric Mapping Sensor (MAMS) images were used in a study to calculate advective surface velocities using the Maximum Cross Correlation (MCC) technique. Radiance and brightness temperature gradient magnitude images were formed from visible (0.48 microns) and infrared (11.12 microns) image pairs, respectively, of Chandeleur Sound, which is a shallow body of water northeast of the Mississippi delta, at 145546 GMT and 170701 GMT on 30 Mar. 1989. The gradient magnitude images enhanced the surface water feature boundaries, and a lower cutoff on the gradient magnitudes calculated allowed the undesirable sunglare and backscatter gradients in the visible images, and the water vapor absorption gradients in the infrared images, to be reduced in strength. Requiring high (greater than 0.4) maximum cross correlation coefficients and spatial coherence of the vector field aided in the selection of an optimal template size of 10 x 10 pixels (first image) and search limit of 20 pixels (second image) to use in the MCC technique. Use of these optimum input parameters to the MCC algorithm, and high correlation and spatial coherence filtering of the resulting velocity field from the MCC calculation yielded a clustered velocity distribution over the visible and infrared gradient images. The velocity field calculated from the visible gradient image pair agreed well with a subjective analysis of the motion, but the velocity field from the infrared gradient image pair did not. This was attributed to the changing shapes of the gradient features, their nonuniqueness, and large displacements relative to the mean distance between them. These problems implied a lower repeat time for the imagery was needed in order to improve the velocity field derived from gradient imagery. Suggestions are given for optimizing the repeat time of sequential imagery when using the MCC method for motion studies. Applying the MCC method to the infrared brightness temperature imagery yielded a velocity field which did agree with the subjective analysis of the motion and that derived from the visible gradient imagery. Differences between the visible and infrared derived velocities were 14.9 cm/s in speed and 56.7 degrees in direction. Both of these velocity fields also agreed well with the motion expected from considerations of the ocean bottom topography and wind and tidal forcing in the study area during the 2.175 hour time interval.

Pope, P. A.↗
NASA NTRS1993

A multi-variance analysis in the time domain

Recently a new technique for characterizing the noise processes affecting oscillators was introduced. This technique minimizes the difference between the estimates of several different variances and their values as predicted by the standard power law model of noise. The method outlined makes two significant advancements: it uses exclusively time domain variances so that deterministic parameters such as linear frequency drift may be estimated, and it correctly fits the estimates using the chi-square distribution. These changes permit a more accurate fitting at long time intervals where there is the least information. This technique was applied to both simulated and real data with excellent results.

Walter, Todd↗
NASA NTRS2014

Comparing Evaporative Sources of Terrestrial Precipitation and Their Extremes in MERRA Using Relative Entropy

A quasi-isentropic back trajectory scheme is applied to output from the Modern Era Retrospective-analysis for Research and Applications and a land-only replay with corrected precipitation to estimate surface evaporative sources of moisture supplying precipitation over every ice-free land location for the period 1979-2005. The evaporative source patterns for any location and time period are effectively two dimensional probability distributions. As such, the evaporative sources for extreme situations like droughts or wet intervals can be compared to the corresponding climatological distributions using the method of relative entropy. Significant differences are found to be common and widespread for droughts, but not wet periods, when monthly data are examined. At pentad temporal resolution, which is more able to isolate floods and situations of atmospheric rivers, values of relative entropy over North America are typically 50-400 larger than at monthly time scales. Significant differences suggest that moisture transport may be the key to precipitation extremes. Where evaporative sources do not change significantly, it implies other local causes may underlie the extreme events.

Climatological Distributions↗
NASA NTRS2021

A NICER View of the Massive Pulsar PSR J0740+6620 Informed by Radio Timing and XMM-Newton Spectroscopy

We report on Bayesian estimation of the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740+6620, conditional on pulse-profile modeling of Neutron Star Interior Composition Explorer X-ray Timing Instrument event data. We condition on informative pulsar mass, distance, and orbital inclination priors derived from the joint North American Nanohertz Observatory for Gravitational Waves and Canadian Hydrogen Intensity Mapping Experiment/Pulsar wideband radio timing measurements of Fonseca et al. We use XMM-Newton European Photon Imaging Camera spectroscopic event data to inform our X-ray likelihood function. The prior support of the pulsar radius is truncated at 16 km to ensure coverage of current dense matter models. We assume conservative priors on instrument calibration uncertainty. We constrain the equatorial radius and mass of PSR J0740+6620 to be-+12.390.981.30km and-+2.0720.0660.067Me respectively, each reported as the posterior credible interval bounded by the 16% and 84% quantiles, conditional on surface hot regions that are non-overlapping spherical caps of fully ionized hydrogen atmosphere with uniform effective temperature; a posteriori, the temperature is=-+TlogK5.99100.060.05([])for each hot region. All software for the X-ray modeling framework is open-source and all data, model, and sample information is publicly available, including analysis notebooks and model modules in the Python language. Our marginal likelihood function of mass and equatorial radius is proportional to the marginal joint posterior density of those parameters(within the prior support)and can thus be computed from the posterior samples.

Millisecond pulsars↗
NASA NTRS1971

A method of computing periods of cyclic phenomena.

Use of an analysis of Expected Mean Square Deviations to search for periodicities in an observational data sample is described. The statistic for testing the null hypothesis of nonperiodicity is derived from a partitioning of the total sum of squared deviations from the mean. Unlike most existing methods, the present one does not require equally spaced observations. No assumptions are made concerning the statistical nature of spacing intervals. The method is illustrated by numerical examples.

Jurkevich, I.↗
NASA NTRS1984

Atlas of high resolution infrared spectra of carbon dioxide

An atlas of long-path room-temperature absorption spectra of carbon dioxide is presented for the spectral intervals 1830-2100 cm, 2395-2680 cm, and 3140-3235 cm. The spectral data were recorded at high signal to noise with the 0.01 cm resolution Fourier transform interferometer. The spectra were obtained with pressures between 1 and 10 Torr of CO2 and with total paths between 24 and 384 meters. A compilation of the measured line positions and the assignments derived from the analysis are presented. Of the 3336 lines in the atlas, 94 percent were identified as CO2 lines or as residual lines H2O and CO. Calculated positions are presented for the carbon dioxide lines; a total of 52 bands of C-12O2-16, C-13O2-16, C-12O-16O-18, C-12O-16O-17, and C-13O-16O18 were identified. The weakest carbon dioxide lines marked in the atlas have intensities of approximately 0.5 x 10 to the negative 26th power cm/molecule at room temperature.

Rinsland, C. P.↗
NASA NTRS1992

Deviations of interstellar extinctions from the mean R-dependent extinction law

An analysis is conducted of the deviations from the mean extinction law A(lambda)/A(V) over UV wavelengths emphasizing sightlines through bright nebulosities vs dark clouds. The stellar sample is subdivided into sight lines with defined properties, and different behavior is noted for the deviations in the dark-cloud and bright-nebula sight lines. The deviations are correlated within the same wavenumber interval, but unique shapes for the FUV rise in the deviations are observed. Distributions of silicate grains are considered to account for the extinctions at certain wavenumbers that would explain the observations. The FUV rise in the extinctions is theorized to be related to the UV extinction of polycyclic aromatic hydrocarbons.

Mathis, John S.↗
NASA NTRS1993

On the variation of the sun's X ray background flux and its relation to the sun's flaring rate, energetic event rate, and the solar cycle

Daily averages of the sun's X-ray background flux as measured by the GOES satellite are combined to yield monthly means and 'smoothed' monthly means (12-month moving averages) for the interval January 1986 through May 1992 (minimum rise, maximum, and initial decline of solar cycle 22). These averages are then compared directly to the sun's optical flaring rate, energetic event rate, and the usual markers of the solar cycle (e.g., sunspot number, total corrected sunspot area, and 10.7-cm solar radio flux, number of groups, and number of spots). The results of this analysis support previous findings that there exists a remarkably close positive relationship between the optical flaring rate and the X-ray background flux rate (the independent variable), and that the X-ray background flux rate can be used as a proxy for the solar cycle. Additionally, this study has found that a strong positive relationship exists between the energetic event rate and the X-ray background flux rate (the independent variable), and that the lag between the maxima of the rates of optical flaring and X-ray background flux reported for cycle 21 did not recur for cycle 22.

Wilson, Robert M.↗
NASA NTRS1999

Automated Flight Dynamics Product Generation for the EOS AM-1 Spacecraft

As part of NASA's Earth Science Enterprise, the Earth Observing System (EOS) AM-1 spacecraft is designed to monitor long-term, global, environmental changes. Because of the complexity of the AM-1 spacecraft, the mission operations center requires more than 80 distinct flight dynamics products (reports). To create these products, the AM-1 Flight Dynamics Team (FDT) will use a combination of modified commercial software packages (e.g., Analytical Graphic's Satellite ToolKit) and NASA-developed software applications. While providing the most cost-effective solution to meeting the mission requirements, the integration of these software applications raises several operational concerns: (1) Routine product generation requires knowledge of multiple applications executing on variety of hardware platforms. (2) Generating products is a highly interactive process requiring a user to interact with each application multiple times to generate each product. (3) Routine product generation requires several hours to complete. (4) User interaction with each application introduces the potential for errors, since users are required to manually enter filenames and input parameters as well as run applications in the correct sequence. Generating products requires some level of flight dynamics expertise to determine the appropriate inputs and sequencing. To address these issues, the FDT developed an automation software tool called AutoProducts, which runs on a single hardware platform and provides all necessary coordination and communication among the various flight dynamics software applications. AutoProducts, autonomously retrieves necessary files, sequences and executes applications with correct input parameters, and deliver the final flight dynamics products to the appropriate customers. Although AutoProducts will normally generate pre-programmed sets of routine products, its graphical interface allows for easy configuration of customized and one-of-a-kind products. Additionally, AutoProducts has been designed as a mission-independent tool, and can be easily reconfigured to support other missions or incorporate new flight dynamics software packages. After the AM-1 launch, AutoProducts will run automatically at pre-determined time intervals . The AutoProducts tool reduces many of the concerns associated with the flight dynamics product generation. Although AutoProducts required a significant effort to develop because of the complexity of the interfaces involved, its use will provide significant cost savings through reduced operator time and maximum product reliability. In addition, user satisfaction is significantly improved and flight dynamics experts have more time to perform valuable analysis work. This paper will describe the evolution of the AutoProducts tool, highlighting the cost savings and customer satisfaction resulting from its development. It will also provide details about the tool including its graphical interface and operational capabilities.

Matusow, Carla↗
NASA NTRS2020

Tidal Effects on the Longitudinal Structures of the Martian Thermosphere and Topside Ionosphere Observed by MAVEN

Longitudinal structures in the Martian thermosphere and topside ionosphere between 150 and 200 km altitudes are studied using in situ electron and neutral measurements from the NASA Mars Atmosphere and Volatile EvolutioN (MAVEN) mission. Four time intervals are selected for comparison, during which MAVEN sampled similar local time (9.3–10.3 h) and latitude (near 20°S) regions but at different solar longitude positions (two near northern summer solstice, one each at northern vernal and autumnal equinoxes). Persistent and pronounced tidal oscillations characterize the ionosphere and thermosphere, whose longitudinal variations in density are generally in-phase with each other. Our analysis of simultaneous and collocated neutral and electron data provides direct observational evidence for thermosphere-ionosphere coupling through atmospheric tides. We conclude that the ionosphere is subject to modulation by upward-propagating thermal tides, via both tide-induced vertical displacement and photochemical reactions. Atmospheric tides constitute a ubiquitous and significant perturbation source to the ionospheric electron density, up to ∼15% near 200 km.

Xiaohua Fang↗
NASA NTRS1981

Observations of the gas stream in the mass transfer binary HR 2142 prime 1

The mass transfer binary system HR 2142 was observed at selected phases with the high resolution spectrograph on IUE. The observations were scheduled throughout the interval 0.91 phi 0.00 in order to allow viewing of the light of the primary star through the gas stream as it presents different orientations to the line of sight. Numerous UV lines formed in the gas stream were identified. The strengths and velocity variations displayed by these lines are compared with those observed in the ground based spectral region. As part of a preliminary analysis of the IUE data, column densities and velocities from Si III (4), Si IV (1), and Ti III (1) are used to deduce electron densities in the gas stream as well as its thickness. Possible evidence for stratification in the gas stream is presented.

Peters, G. J.↗
NASA NTRS1988

Surface and interfacial properties of carbon fibers

Differences in the adhesion of three carbon fibers (Hercules AS1 and AS4, and Hysol-Grafil XAS) to polycarbonate (PC) have been shown to correlate with the absorptivity of PC on the three fiber types. The absorptivity (energy of absorption) was determined using retention time liquid chromatography and the adhesion was measured using the single embedded filament tensile test. A correlation was also found between adhesion strength and the O/N surface element ratio using XPS analysis. The chemical details for these correlations have not yet been determined. A study of filament fracture statistics has been initiated using single and multiple embedded filament tensile tests. Filament fracture has been measured as a function of strain and for different interfiber distances. Preliminary results indicate that fiber fracture is a discontinuous function of increasing strain and may in fact occur at discrete strain intervals. Fiber-fiber interaction effects on fiber fracture have been found for interfiber distances of up to two to three fiber diameters.

Bascom, W. D.↗
NASA NTRS1988

The effects of geopotential resonance on orbit determination for Landsat-4

Analysis is presented demonstrating improved performance for Landsat-4 orbit determination using the Goddard Trajectory Determination System with an adjusted Goddard Earth Model-9 (GEM-9) for geopotential coefficients of the 15th degree and order. The orbital state is estimated along with the sine and cosine coefficients of degree and order 15, (C, S) sub 15,15. The estimates are made for two 5-day intervals of range and doppler data, primarily from the Tracking and Data Relay Satellite, during a period of low solar activity in January 1987. The average values of the estimated coefficients (C, S) sub 15,15 are used to modify the GEM-9 model, and orbit determination performance is tested on 17 consecutive 34-hour operational tracking data arcs in January 1987. Significant reductions in the mean values and standard deviations of the along-track position difference and the drag model scaling parameter from solution to solution are observed. The approach is guided by the shallow resonance theory of geopotential orbit perturbations.

Hoge, S. L.↗
NASA NTRS1988

PIA update: Correlation analyses of mass spectra

The PIA instrument aboard the Giotto spacecraft (a time of flight spectrometer) has been presented elsewhere. The mass spectra used in this analysis were decoded and mass numbers assigned according to the presence of carbon and silver, using the global values for these elements in their spectral absence. The results presented here were obtained using a frequency of occurrence based on analysis which correlated how often mass numbers appear in the mass spectra and which mass numbers tend to occur together in the same spectra; no amplitude information is utilized. The data are presented as plots of mass vs coincident mass for different subsets of the PIA data set, with both axes having units of atomic mass. Frequency contours are plotted at approximately five percent contour intervals, relative to the maximum AMU occurrence in that plot. The plots presented are symmetrical about the matrix diagonal, i.e., every mass is coincident with itself in a given spectra.

Mason, L. W.↗
NASA NTRS1988

Nimbus-7 ERB Solar Analysis Tape (ESAT) user's guide

Seven years and five months of Nimbus-7 Earth Radiation Budget (ERB) solar data are available on a single ERB Solar Analysis Tape (ESAT). The period covered is November 16, 1978 through March 31, 1986. The Nimbus-7 satellite performs approximately 14 orbits per day and the ERB solar telescope observes the sun once per orbit as the satellite crosses the southern terminator. The solar data were carefully calibrated and screened. Orbital and daily mean values are given for the total solar irradiance plus other spectral intervals (10 solar channels in all). In addition, selected solar activity indicators are included on the ESAT. The ESAT User's Guide is an update of the previous ESAT User's Guide (NASA TM 86143) and includes more detailed information on the solar data calibration, screening procedures, updated solar data plots, and applications to solar variability. Details of the tape format, including source code to access ESAT, are included.

Major, Eugene↗
NASA NTRS1990

A polar orbit for the Mars Global Network Mission

The purpose of the Global Network Mission (GNM) is to deploy simple landers on the Martian surface in late 1998. The objective is to create a globally distributed network of ground stations which will collect environmental data, perhaps for as long as several years. The GNM presents unique mission design challenges, which are addressed by the following essay. The GNM mission concept calls for two carrier spacecraft, each equipped with a number of simple landers. Some of the landers may be deployed from approach, either to reduce carrier mass prior to orbit insertion, or to reach latitudes not available from the carrier orbit. The remaining landers are deployed from orbit. One configuration for the Global Network Mission was proposed in a report from the Exploration Precursors Task Team to the Office of Space Science and Applications. This formed the basis of a previous orbit design for the GNM. This mission scenario is used as a point of reference, but results from the current study are generally applicable to a wide range of GNM mission variants. The analysis concluded that a 1/5 sol, polar orbit with a periapse altitude of 275 km offers the best circumstances for orbital deployment of the Global Network Mission landers. It allows easy polar access at nominal entry angles, and global dispersal of landing sites at lighting angles suitable for descent imaging. The polar orbit allows the option of deploying all the landers from orbit. A wait interval of 160 days after arrival is required before deployment can commence.

Knocke, Philip↗