Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Hydrolytic Softening of Ocean Water for Carbon Dioxide Removal

This project provided the proof of concept testing for hydrolytic softening, a process for ocean carbon dioxide removal (CDR) based on precipitation softening, where the hydrated lime used to initiate carbonate precipitation is regenerated using a low-energy thermochemical cycle. These proof of concept tests demonstrated each key step of the hydrolytic CDR process including: 1) precipitation of dissolved carbon dioxide from seawater using hydrated lime, 2) decomposing the precipitated calcium carbonate to separate a high-purity stream of carbon dioxide, and 3) regenerating hydrated lime from the decomposition products to complete the cycle. The experimental results were used as the basis for a chemical process model of hydrolytic CDR, which was then used to estimate the techno-economic performance of a conceptual full-scale system. Results included a total energy consumption estimate of 248 kJ per mole of separated and compressed CO 2 . The predicted levelized cost of ocean CDR using hydrolytic softening could reach the Department of Energy’s Carbon Negative Shot target of $\$$100/tCO 2 assuming optimally-sited wind power resources with a power cost of $\$$26/MWh. If developed further, hydrolytic CDR could be a near-term, scalable, and cost-effective method to draw down legacy carbon dioxide emissions that have been absorbed in the oceans. Offshore operations would create highly skilled jobs directly at the CDR facilities in addition to supporting a wider network of coastal service providers and their communities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TCF - Sustainable Well Cement for Geothermal, Thermal Recovery, and Carbon Storage wells

Primary cementing is the most important operation performed on a subterranean well. Cement, placed in the annulus between the casing and the formations, serves as a hydraulic seal preventing fluids and gas migrations, protecting steel casing from corrosion, and supporting the well structure. Poor cementing jobs can be directly responsible for wells not reaching their full capacity, casing corrosion, compromised well integrity and, in the worst-case scenarios, well collapse. Geothermal, thermal recovery, and carbon storage wells offer environments that are especially difficult for cements to survive while the required lifespan of these wells can be years. In these wells currently used cements cannot provide durable well integrity, and new solutions are necessary. The necessity of stabilizing the electric grid, increasing its flexibility, and providing energy on demand will further expand the market of durable cement solutions for applications in high-temperature underground reservoir thermal energy storage wells (HT RTES). The design challenges of special cement systems for such wells originate from chemistry limitations of currently used well cements, aggressive environments, temperature and repeated shock conditions associated with them, and very weak formations that are not uncommon in these wells. During the last 70 years the most common systems for thermal-well construction have been Ordinary Portland Cement (OPC) (absolute majority of the wells), silica-lime system, and high aluminum cement-containing formulations. The major issues of calcium-silicate hydrates, that form during the hydration of OPC resulting in hardened material, are their poor chemical resistance to acids due to the calcium interactions with acid anions followed by its eventual dissolution, even in mild acids, such as carbonic acid from CO 2 dissolution, and inadequate bonding to the steel causing serious casing corrosion problems (Sugama & Pyatina, 2019). Performance of OPC-based cement may be significantly improved with organic additives; however, those are limited by their temperature stability. An alternative to calcium-silicate cement was developed by BNL and commercialized by Halliburton as ThermaLock TM cement. Calcium-aluminate-phosphate-based chemistry of the material allowed overcoming acid-resistance problems of OPC, especially in CO 2 -rich geothermal environments. In 2012-2015, building upon this experience, BNL developed Thermal Shock Resistant Cement (TSRC) with the support of Geothermal Technology Office (GTO) of DOE. TSRC has high-temperature stable chemistry, superior properties of cement-metal casing bond and corrosion protection (4-times better than currently used OPC-based formulation), significantly outperforms common well-cements in thermal-shock tests, has self-healing properties, and like ThermaLock TM is CO 2 resistant incorporating carbonate ions into stable hydrates (Gill et al., 2012).

15 GEOTHERMAL ENERGY↗

Multiphysics and Multiscale Modeling of Coupled Transport of Chloride Ions in Concrete

Chloride ions (Cl−)-induced corrosion is one of the main degradation mechanisms in reinforced concrete (RC) structures. In most situations, the degradation initiates with the transport of Cl− from the surface of the concrete towards the reinforcing steel. The accumulation of Cl− at the steel-concrete interface could initiate reinforcement corrosion once a threshold Cl− concentration is achieved. An accurate numerical model of the Cl− transport in concrete is required to predict the corrosion initiation in RC structures. However, existing numerical models lack a representation of the heterogenous concrete microstructure resulting from the varying environmental conditions and the indirect effect of time dependent temperature and relative humidity (RH) on the water adsorption and Cl− binding isotherms. In this study, a numerical model is developed to study the coupled transport of Cl− with heat, RH and oxygen (O2) into the concrete. The modeling of the concrete microstructure is performed using the Virtual Cement and Concrete Testing Laboratory (VCCTL) code developed by the U.S. National Institute of Standards and Technology (NIST). The concept of equivalent maturation time is utilized to eliminate the limitation of simulating concrete microstructure using VCCTL in specific environmental conditions such as adiabatic. Thus, a time-dependent concrete microstructure, which depends on the hydration reactions coupled with the temperature and RH of the environment, is achieved to study the Cl− transport. Additionally, Cl− binding isotherms, which are a function of the pH of the concrete pore solution, Cl− concentration, and weight fraction of mono-sulfate aluminate (AFm) and calcium-silicate-hydrate (C-S-H), obtained from an experimental study by the same authors are utilized to account for the Cl− binding of cement hydration products. The temperature dependent RH diffusion was considered to account for the transport of Cl− with moisture transport. The temperature and RH diffusion in the concrete domain, composite theory, and Cl− binding and water adsorption isotherms are used in combination, to estimate the ensuing Cl− diffusion field within the concrete. The coupled transport process of heat, RH, Cl−, and O2 is implemented in the Multiphysics Object-Oriented Simulation Environment (MOOSE) developed by the U.S. Idaho National Laboratory (INL). The model was verified and validated using data from multiple experimental studies with different concrete mixture proportions, curing durations, and environmental conditions. Additionally, a sensitivity analysis was performed to identify that the water-to-cement (w/c) ratio, the exposure duration, the boundary conditions: temperature, RH, surface Cl− concentration, Cl− diffusion coefficient in the capillary water, and the critical RH are the important parameters that govern the Cl− transport in RC structures. In a case study, the capabilities of the developed numerical model are demonstrated by studying the complex 2D diffusion of Cl− in a RC beam located in two different climatic regions: warm and humid weather in Galveston, Texas, and cold and dry weather in North Minnesota, Minnesota, subjected to time varying temperature, RH, and surface Cl− concentrations.

composite theory↗

Decoupling of the onset of anharmonicity between a protein and its surface water around 200 K

The protein dynamical transition at ~200 K, where the biomolecule transforms from a harmonic, non-functional form to an anharmonic, functional state, has been thought to be slaved to the thermal activation of dynamics in its surface hydration water. Here, by selectively probing the dynamics of protein and hydration water using elastic neutron scattering and isotopic labeling, we found that the onset of anharmonicity in the two components around 200 K is decoupled. The one in protein is an intrinsic transition, whose characteristic temperature is independent of the instrumental resolution time, but varies with the biomolecular structure and the amount of hydration, while the one of water is merely a resolution effect.

59 BASIC BIOLOGICAL SCIENCES↗

Primary radical yields in pulse irradiated alkaline aqueous solution

Primary radical yields of hydrated electrons, H atoms, and OH radicals are determined by measuring hydrated electron formation following a 4 microsecond pulse of X rays. The pH dependence of free radical yields beyond pH 12 is determined by observation of the hydrated electrons.

Fielden, E. M.↗

Modified Iterative Extended Hueckel. 2: Application to the interaction of Na(+), Na(+)(aq.), Mg(+)-2(aq.) with adenine and thymine

Modified Iterative Extended Hueckel, which includes explicit effective internuclear and electronic interactions, is applied to the study of the energetics of Na(+),Mg(+), Na(+) (aqueous), and Mg(+2) (aqueous) ions approaching various possible binding sites on adenine and thymine. Results for the adenine + ion and thymine + ion are in good qualitative agreement with ab initio work on analogous systems. Energy differences between competing sites are in excellent agreement. Hydration appears to be a critical factor in determining favorable binding sites. That the adenine Nl and N3 sites cannot displace a water molecule from the hydrated cation indicates that they are not favorable binding sites in aqueous media. Of those sites investigated, 04 was the most favorable binding site on the thymine for the bare Na(+). However, the 02 site was the most favorable binding site for either hydrated cation.

Aronowitz, S.↗

Ion-induced nucleation in a binary mixture

Recent ion-induced nucleation studies in a binary mixture of H2O and H2SO4 vapors indicate that conventional classical nucleation theories cannot account for the experimentally observed ion-H2O-H2SO4 microcluster spectra. An empirical-analytical, semi-molecular theory of nucleation of a binary mixture of vapors on ions has been developed. This theory includes molecular approach to ion-induced changes in dielectric properties in the immediate neighborhood of an ion core as well as the size dependence of the surface tension of the microcluster. In addition to gaseous sulfuric acid and water molecules, the effect of ion-hydrates and sulfuric acid hydrates has also been considered. This theory is further simplified by using an empirical correction factor for the electrostatic term. This correction factor has been obtained by comparing the simplified model with the molecular dynamics calculations for selected ion hydrate formation. These two theoretical models are then compared with the classical theory for a variety of experimental conditions.

Smith, A. C.↗

The 1.7- to 4.2-micron spectrum of asteroid 1 Ceres - Evidence for structural water in clay minerals

A high-resolution Fourier spectrum (1.7-3.5 microns) and medium-resolution spectrophotometry (2.7-4.2 microns) were obtained for Asteroid 1 Ceres. The presence of the 3-micron absorption feature due to water of hydration was confirmed. The 3-micron feature is compared with the 3-micron bands due to water of hydration in clays and salts. It is concluded that the spectrum of Ceres shows a strong absorption at 2.7-2.8 microns due to structural OH groups in clay minerals. The dominant minerals on the surface of Ceres are therefore hydrated clay minerals structurally similar to terrestrial montmorillonites. There is also a narrow absorption feature at 3.1 microns which is attributable to a very small amount of water ice on Ceres. This is the first evidence for ice on the surface of an asteroid.

Lebofsky, L. A.↗

Non-solar noble gas abundances in the atmosphere of Jupiter

The thermodynamic stability of clathrate hydrate is calculated to predict the formation conditions corresponding to a range of solar system parameters. The calculations were performed using the statistical mechanical theory developed by van der Waals and Platteeuw (1959) and existing experimental data concerning clathrate hydrate and its components. Dissociation pressures and partition functions (Langmuir constants) are predicted at low pressure for CO clathrate (hydrate) using the properties of chemicals similar to CO. It is argued that nonsolar but well constrained noble gas abundances may be measurable by the Galileo spacecraft in the Jovian atmosphere if the observed carbon enhancement is due to bombardment of the atmosphere by clathrate-bearing planetesimals sometime after planetary formation. The noble gas abundances of the Jovian satellite Titan are predicted, assuming that most of the methane in Titan is accreted as clathrate. It is suggested that under thermodynamically appropriate conditions, complete clathration of water ice could have occurred in high-pressure nebulas around giant planets, but probably not in the outer solar nebula. The stability of clathrate in other pressure ranges is also discussed.

Lunine, Jonathan I.↗

Infrared observations of solar system objects

This program is a continuing effort to study the near infrared (reflected) to thermal infrared flux from asteroids and other airless bodies using groundbased telescopes. The goal of the observations is to investigate the mineralogy and thermophysical properties of these bodies and to support present and potential future missions. During the past year, researchers continued the search for water of hydration on asteroids. Their work has shown that water in the form of hydrated silicates does not exist on the surfaces of the outerbelt asteroids. This implies that the water we see on the c-class asteroids is most likely aqueous alternative products. That water in the ultraprimitive asteroids may be in the form of ice rather than water of hydration. Work continues on the thermal properties of asteroids. It was found that the lightcurve of 532 Herculina is done primarily to shape rather than the proposed surface albedo variation. In collaboration with other groups, researchers took advantage of the mutual events between Pluto and its satellite Charon; water ice was discovered on the surface of Charon. The surface composition of Pluto is being studied.

Lebofsky, Larry A.↗

The nature of low-albedo asteroids from 3-micron multi-color photometry

The present broadband and narrowband 1.2-3.5 micron spectrophotometry of 16 low-albedo asteroids encompasses C-, F-, P-, D-, and T-class asteroids, and has been used in an effort to identify low-temperature minerals on their surfaces. Attention has been given to the identification of water of hydration. While G-class asteroids have water-rich surfaces, and I asteroids possess some hydrated silicates, not all class Cs do. Finally, the P-, F-, and T-class asteroids do not seem to possess hydrated-silicate surfaces.

Lebofsky, Larry A.↗

Potential for the identification of localized water-bearing regions on Mars

Interpretations of airborne telescopic observations of Mars in the thermal infrared have identified absorption features due to several volatile-bearing minerals. The presence of some of these (e.g., carbonates) support previous suggestions that Mars once had a denser atmosphere early in its history. While these interpretations provide for ample scientific discussion, from the view of indigenous resource utilization the identification of hydrates is perhaps key to the exploration of Mars. Water is essential to a prolonged human presence in space and more specifically on Mars. Both life support and any agricultural endeavor require quantities of water which are cost prohibitive to transport over large distances. Additionally, water could provide a source of indigenous chemical fuel which could be used for transportation. Hydrates, from which water can be extracted may prove to be a valuable resource on the Martian surface. It is vital to assess the presence of special environments or localized regions on Mars in which hydrates are concentrated, and map the distribution of this potential resource.

Roush, Ted↗

An infrared reflectance study of low albedo surface constituents

Observational testing of the idea that the distribution of water is the key to understanding the volatile content of the asteroid belt relies on the exploration of the 3 micron absorption feature in hydrated silicates - the only diagnostic spectral band evident in the dark, volatile rich CI and CM meteorites. The existence of the band has demonstrated the presence of hydrated silicates on asteroids. An example of this feature is shown in the spectrum of the CI meteorite Orgueil. The feature is characterized by a sharp reflectance drop at 2.7 microns, due to structural OH, and by an absorption due to H2O that decreases slowly out to about 3.5 microns. In their present observational program, researchers are expanding their observational program to include other low-albedo classes of asteroids - asteroids that range primarily from the middle and outer asteroid belt (greater than 2.5 AU) to the Trojan region at 5.2 AU. Preliminary results indicate that the outer belt and Trojan asteroids do not show feature diagnostic of hydrated silicates. Researchers conclude that these asteroids have not undergone the alteration processes that we see in C-class asteroids.

Lebofsky, Larry A.↗

Far infrared spectra of amorphous and crystalline water ice and changes in these phases as the result of proton irradiation

Far infrared spectra from 20 microns (500 cm(sup -1)) to 100 microns (100 cm(sup -1)) of water ice were measured. Amorphous ice deposited at 13 K has one absorption band at 45 microns (220 cm(sup -1)). Amorphous ice evolves into a crystalline form with absorptions at 44 microns (229 cm(sup -1)) and 62 microns (162 cm(sup -1)) as the temperature is increased to 155 K. Spectra documenting this phase change are presented as well as spectra of crystalline ice at temperatures between 13 K and 155 K. Far infrared spectra of amorphous and crystalline water ice before and after proton irradiation are also presented. Changes in these two forms are discussed in relation to ices in comets, grains, and planetary satellites in various radiation environments. Observations of non-terrestrial clathrate hydrates are still lacking despite the fact that clathrates first were suggested to exist in cometary and interstellar ices over forty years ago. Spectroscopy, the most direct method of astronomical detection, has been hampered by the similarity of clathrate hydrate spectra to those of unenclathrated guest molecules and solid H2O. A methanol (CH3OH) clathrate hydrate, using a recently published procedure, was prepared and its far-IR spectrum investigated. The spectrum is quite differenct from that of either unenclathrated CH3OH or solid H2O and so should be of value in astronomical searches for this clathrate.

Hudson, Reggie L.↗

Preliminary results of an experimental study of the interactions of basalt glass and a water vapor atmosphere: Implications for weathering on Mars

Models of weathering processes on the surface of Mars invoke hydrothermal alteration as the primary mechanism responsible for clay formation. Previous experimental studies of basalt glass interactions with water under hydrothermal conditions demonstrate that phyllosilicates and zeolites are the primary alteration minerals. Gas-solid weathering is thought to be less thermodynamically favorable and relatively unimportant, however, the experimental alteration of basalt glass under vapor ion conditions (large SA/V) can result in the formation of clay minerals, zeolites, and hydrated calcium silicates. We have undertaken a study of the reacted layers formed on basalt glasses experimentally altered under vapor hydration conditions to resolve this issue. High SA/V ratios promote reaction product buildup in solution and promote alteration mineral formation. It was previously shown that these reaction conditions promote weathering processes similar to those found in nature for tektite glasses, rhyolitic glasses, and basalt glasses. The hydration of basalt glass is described for 100 percent relative humidity experiments at temperatures of 150, 175, and 200 C for up to 400 days. Preliminary characterization of the alteration layers with analytical electron and scanning microscopy suggest that the reaction mechanism includes precipitation of a smectite clay on the outermost surface of the glass. Between the clay and the unreacted glass is an amorphous gel-like phase (palagonite). Our results provide an experimental basis for proposing that basalt glass interactions with vapor atmospheres can be an important source of clay minerals.

Mazer, J. J.↗

Alteration of hydrovolcanic basaltic ash - Observations with visible and near-infrared spectrometry

Altered basaltic tephras from tuff rings and tuff cones across the Basin and Range were examined using visible and NIR (Vis/IR) reflectance spectrometry and a variety of other techniques. It was found that Vis/IR spectrometry is sensitive to subtle changes in the hydration and oxidation state of these tephras. In the tuffs examined, ferrous and ferric iron minerals produce one composite absorption feature rather than two resolvable bands. Different styles of alteration were noted between thinly bedded tuff ring deposits emplaced by high energy, largely dry, pyroclastic surge and massively bedded tuff cone deposits emplaced by wetter, lower energy pyroclastic flow. The former class of tephras become hydrated and only moderately oxidized with some limited development of dioctehedral smectite clay minerals and minimal palagomitization. The latter class of tephras are highly palagonitized which implies a high degree of hydration and oxidation. In the most of highly altered tephras, all the Fe(2+) that is initially in the volcanic glass is converted to Fe(3+) within nanophase and bulk ferric oxide phases in the palagonite. There is also more extensive development in tuff cone beds of zeolite and phyllosilicate minerals. The differences in reflectance spectra of altered basaltic tephras can be traced to initial differences in the water/magma ratio extant at the volcanic vent.

Farrand, William H.↗

Electron energy-loss spectroscopy of carbon in interplanetary dust particles

The nature of the carbon-bearing phases in IDP's provides information regarding the chemical and physical processes involved in the formation and evolution of the early solar system. Several carbon-bearing materials have been observed in IDP's, but details of their nature, abundance, and distribution are still poorly known. A knowledge of the abundance and nature of carbon in IDP's is useful in constraining the sources of IDP's and for comparisons with other chondritic materials. Estimates of carbon abundance in anhydrous and hydrated IDP's indicate that most of these particles have significantly higher carbon than the carbonaceous chondrites. Mineralogical analyses show that carbonates are only a minor component of most hydrated IDP's, and so the high carbon abundances in this group of IDP's indicates that other carbon-bearing phases are present in significant concentrations. Using the technique of electron energy-loss spectroscopy (EELS), we have identified two forms of carbon in a hydrated IDP, oxidized carbon (carbonates), and amorphous elemental carbon.

Keller, Lindsay P.↗

Radiation Synthesis of New Molecules on Jupiter's Icy Satellites

Spectra of Jupiter's icy satellites reveal surfaces dominated by water-ice, minor amounts of SO2 and CO2, and (for Europa) H2O2 along with hydrated materials. Jovian magnetospheric ions (protons, sulfur, and oxygen) and electrons significantly modify the chemical composition of these moons' surfaces in times ranging from a few years for Europa to thousands of years for Callisto at micrometer depths. Appropriate laboratory studies examining relevant volatile and non-volatile materials under low-temperature radiation conditions can provide information on likely radiation chemical mechanisms, on the stability and evolution of species, and on new species awaiting detection. Although the molecules detected on the icy moons are relatively simple, predicting their responses to radiation in space remains difficult. One problem is that there is a dearth of fundamental data examining solid-phase reactions. Our laboratory experiments have focused on infrared studies (2.5 to 25 microns) of a few simple irradiated ices. We have measured the spectra of proton-irradiated H2O ice containing SO2, H2S, and/or CO2. Ices with H2O/SO2 or H2O/H2S ratios of 3 and 30 have been irradiated at 86 K, 110 K, and 132 K. In irradiated H2O + SO2 ices new ions have been identified: SO4(-2), HSO4(-) and H3O(+). After warming to 260 K the residual spectrum is similar to that of H2SO4. Ices with H2O + H2S form SO2. After warming to 175 K, the residual sample matches the spectrum of hydrated H2SO4. H2O + CO2 ice forms carbonic acid, H2CO3 which is stable to temperatures near 230 K. In addition, OCS has been detected in irradiated ices containing H2O + SO2 + CO2. The radiation half-life of SO2 and H2S in H2O has been calculated. Our results give compelling evidence for the presence of new species awaiting detection. Future experiments will examine the signatures of these ices and hydrated materials in the 1 to 5 micron region, where possible weaker overtone bands may occur. In addition, absolute strengths for both the fundamental and overtone bands will be determined. Finally, good arguments can be made, based on current information, for remote sensing observations that have spectral coverage to at least 5 microns on the long wavelength end. This range would include some of the characteristic bands of H2O, H2O2, CO2, SO2, H2CO3, H2S, and OCS.

Moore, M. H.↗