Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “growth processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Growing InGaAs quasi-quantum wires inside semi-rhombic shaped planar InP nanowires on exact (001) silicon

We report InGaAs quasi-quantum wires embedded in planar InP nanowires grown on (001) silicon emitting in the 1550 nm communication band. An array of highly ordered InP nanowire with semi-rhombic cross-section was obtained in pre-defined silicon V-grooves through selective-area hetero-epitaxy. The 8% lattice mismatch between InP and Si was accommodated by an ultra-thin stacking disordered InP/GaAs nucleation layer. X-ray diffraction and transmission electron microscope characterizations suggest excellent crystalline quality of the nanowires. By exploiting the morphological evolution of the InP and a self-limiting growth process in the V-grooves, we grew embedded InGaAs quantum-wells and quasi-quantum-wires with tunable shape and position. Room temperature analysis reveals substantially improved photoluminescence in the quasi-quantum wires as compared to the quantum-well reference, due to the reduced intrusion defects and enhanced quantum confinement. These results show great promise for integration of III-V based long wavelength nanowire lasers on the well-established (001) Si platform.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanocrystalline Cu{sub 2}ZnSnSe{sub 4} thin films for solar cells application: Microdiffraction and structural characterization

This work presents a study of the structural characterization of Cu{sub 2}ZnSnSe{sub 4} (CZTSe) thin films by X-ray diffraction (XRD) and microdiffraction measurements. Samples were deposited varying both mass (M{sub X}) and substrate temperature (T{sub S}) at which the Cu and ZnSe composites were evaporated. CZTSe samples were deposited by co-evaporation method in three stages. From XRD measurements, it was possible to establish, with increased Ts, the presence of binary phases associated with the quaternary composite during the material's growth process. A stannite-type structure in Cu{sub 2}ZnSnSe{sub 4} thin films and sizes of the crystallites varying between 30 and 40 nm were obtained. X-ray microdiffraction was used to investigate interface orientations and strain distributions when deposition parameters were varied. It was found that around the main peak, 2ϴ = 27.1°, the Cu{sub 1.8}Se and ZnSe binary phases predominate, which are formed during the subsequent material selenization stage. A Raman spectroscopy study revealed Raman shifts associated with the binary composites observed via XRD.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth of monolithic full-color GaN-based LED with intermediate carrier blocking layers

Specially designed intermediate carrier blocking layers (ICBLs) in multi-active regions of III-nitride LEDs were shown to be effective in controlling the carrier injection distribution across the active regions. In principle, the majority of carriers, both holes and electrons, can be guided into targeted quantum wells and recombine to generate light of specific wavelengths at controlled current-densities. Accordingly we proposed and demonstrated a novel monolithic InGaN-based LED to achieve three primary colors of light from one device at selected current densities. This LED structure, which has three different sets of quantum wells separated with ICBLs for three primary red-green-blue (RGB) colors, was grown by metal-organic chemical vapor deposition (MOCVD). Results show that this LED can emit light ranging from 460 to 650 nm to cover the entire visible spectrum. The emission wavelength starts at 650 nm and then decreases to 460 nm or lower as the injection current increases. In addition to three primary colors, many other colors can be obtained by color mixing techniques. To the best of our knowledge, this is the first demonstration of monolithic full-color LED grown by a simple growth technique without using re-growth process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rocking curve imaging of high quality sapphire crystals in backscattering geometry

Here, we report on the characterization of high quality sapphire single crystals suitable for high-resolution X-ray optics at high energy. Investigations using rocking curve imaging reveal the crystals to be of uniformly good quality at the level of ~10 -4 in lattice parameter variations, deltad/d. But, investigations using backscattering rocking curve imaging with lattice spacing resolution of deltad/d ~ 5.10 -8 shows very diverse quality maps for all crystals. Our results highlight nearly ideal areas with edge length of 0.2-0.5 mm in most crystals, but a comparison of the back re ection peak positions shows that even neighboring ideal areas exhibit a relative difference in the lattice parameters on the order of deltad/d = 10-20.10 -8 ; this is several times larger than the rocking curve width. Furthermore, the stress-strain analysis suggests that an extremely stringent limit on the strain at a level of ~100 kPa in the growth process is required in order to produce crystals with large areas of the quality required for X-ray optics at high energy.

36 MATERIALS SCIENCE↗

High spin polarization in epitaxial Fe 4 N thin films using Cr and Ag as buffer layers

Fe 4 N thin films with (001) texture were prepared by reactive sputtering on MgO substrates, utilizing either a Cr or Ag buffer layer to facilitate the epitaxial growth. X-ray diffraction, atomic force microscopy, and vibrating sample magnetometry measurements show that the Fe 4 N thin film grown on the Ag buffer layer is superior to that grown on the Cr buffer layer. The point contact Andreev reflection measurement was then conducted, and the spin polarizations were determined to be 61.1% and 81.3% for Fe 4 N thin films with Cr and Ag buffer layers, respectively. The 81.3% spin polarization is significantly higher than the ratio reported previously for Fe 4 N and is comparable with that of state-of-the-art Heusler alloys. This result is in agreement with the theoretical prediction on the discrepancy between the two differently defined spin polarizations for Fe 4 N. Moreover, our study indicates that an optimized growth process for Fe 4 N thin films is crucial for achieving a high spin polarization and that true half-metallicity could potentially be realized with Fe 4 N. Furthermore the high spin polarization of Fe 4 N combined with its low fabrication temperature and simple composition makes Fe 4 N a competitive candidate to be a half-metallic ferromagnet in spintronic devices.

36 MATERIALS SCIENCE↗

Competitive formation of intercalated versus supported metal nanoclusters during deposition on layered materials with surface point defects

Intercalated metal nanoclusters (NCs) can be formed under the surface of graphite after sputtering to generate surface “portal” defects that allow deposited atoms to reach the subsurface gallery. Although, there is a competition between formation of supported NCs on top of the surface and intercalated NCs under the surface, the latter only dominating at sufficiently high temperature. A stochastic model incorporating appropriate system thermodynamics and kinetics is developed to capture this complex and competitive nucleation and growth process. Kinetic Monte Carlo simulation shows that the model captures experimental trends observed for Cu and other metals and reveals that higher temperatures are needed to facilitate detachment of atoms from supported NCs enabling them to reach the gallery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect characterization and charge transport measurements in high-resolution Ni/n-4H-SiC Schottky barrier radiation detectors fabricated on 250 μ m epitaxial layers

Advances in the growth processes of 4H-SiC epitaxial layers have led to the continued expansion of epilayer thickness, allowing for the detection of more penetrative radioactive particles. In this work, we report the fabrication and characterization of high-resolution Schottky barrier radiation detectors on 250 μm thick n-type 4H-SiC epitaxial layers, the highest reported thickness to date. Several 8 × 8 mm 2 detectors were fabricated from a diced 100 mm diameter 4H-SiC epitaxial wafer grown on a conductive 4H-SiC substrate with a mean micropipe density of 0.11 cm -2 From the Mott–Schottky plots, the effective doping concentration was found to be in the range (0.95–1.85) × 10 14 cm -3 , implying that full depletion could be achieved at ~5.7 kV (0.5 MV/cm at the interface). The current-voltage characteristics demonstrated consistently low leakage current densities of 1–3 nA/cm 2 at a reverse bias of -800 V. This resulted in the pulse-height spectra generated using a 241Am alpha source (5486 keV) manifesting an energy resolution of less than 0.5% full width at half maximum (FWHM) for all the detectors at -200 V. The charge collection efficiencies (CCEs) were measured to be 98–99% with no discernable correlation to the energy resolution. A drift-diffusion model fit to the variation of CCE as a function of bias voltage, revealed a minority carrier diffusion length of ~10 μm. Deep level transient spectroscopy measurements on the best resolution detector revealed that the excellent performance was the result of having ultralow concentrations of the order of 1011 cm-3 lifetime limiting defects—Z 1/2 and EH 6/7 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deterministic modeling of hybrid nonlinear effects in epsilon-near-zero thin films

In nonlinear optics, significant effort is concentrated on improving the strength and efficiency of interactions; however, experimentally investigating nonlinear materials is a complex, time-consuming, and costly investment. Moreover, it is often challenging to isolate, study, and optimize material parameters in an experiment due to complexities in the growth process. Recently, epsilon-near-zero materials have received a great deal of attention as promising nonlinear optical materials, but like many up-and-coming materials, the ability to explore and optimize their properties has been challenging. Here, we establish a framework to rapidly evaluate the performance of nonlinear epsilon-near-zero materials for both inter- and intraband effects in silico, requiring only an energy-momentum (E-k) diagram, linear optical properties, and experimental conditions. Measured nonlinear reflection and transmission in gallium-doped zinc oxide films are compared to the numerical framework for both intra- and interband excitation to verify accuracy across wavelength and irradiance while two figures of merit (FoMs) are introduced to quickly evaluate the performance of films without a full numerical framework. This capability is used to predict the performance of highly doped gallium nitride, cadmium oxide, zinc oxide, and indium tin oxide films, and efficient intra- and interband operation conditions are identified. Through this numerical framework and the FoMs, the exploration of unstudied epsilon-near-zero materials is enabled without the need for a nonlinear experiment, thereby accelerating the search for more efficient nonlinear materials and excitation conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Twin density and twin thickness evolution in sputtered Al–Mg alloys

Twinned Al–Mg alloys have been reported. However, the role of Mg solute in facilitating the formation of growth twins remains unclear. By using a precession-assisted crystal orientation mapping technique (PACOM) coupled with transmission electron microscopy (known as ASTAR), we examined the evolution of twin boundaries in Al, Al–1Mg, and Al–2.2Mg (at. %) films. The twinned grain fraction elevates with increasing film thickness until it reaches a peak when the film thickness is 120–160 nm. The Al–Mg alloys exhibited greater twinned grain fractions than pure Al. To investigate the fluctuation of twinned grain fraction, two types of twin boundaries were classified including intergranular and intragranular twins. The initial increase in twin density is attributed to the impingement of twinned grains during island coalescence and the twinned grains are more likely to survive during the grain growth process. Whereas the decrease in twinned grain fraction in thicker films is related to the removal of intragranular twins, and a lack of formation mechanisms of new twins.

Physics↗

A study of explosive-induced fracture in polymethyl methacrylate (PMMA)

The fracture response of geologic materials is of interest for applications, including geothermal energy harnessing and containment of underground explosions. To better understand the explosively induced fracture response of geomaterials, polymethyl methacrylate (PMMA) was used as a transparent rock surrogate to allow imaging of internal shock propagation and fracture growth processes. Experiments were conducted using high-speed shadowgraphy and photon Doppler velocimetry (PDV), which were compared to numerical simulations. Experiments measured fractures produced in 304.8mm × 304.8mm × 304.8mm PMMA cubes with two simultaneously initiated detonators. The cubes were subjected to varying amounts and directions of externally applied uniaxial stresses, including no stress, 2 MPa stress, and 20 MPa stress. The fracture radius as a function of time was extracted from the high-speed videos. Post-test images of the PMMA cubes aided in the determination of three-dimensional effects not directly imaged by the cameras. The surface velocity history and the shock response captured in PDV and the high-speed videos were compared to the simulated explosive-induced shock response. The simulation results indicate that the shock drives the fracture for the first 20 μs corresponding to a fracture radius of approximately 15 mm in the experiments. The gas-driven fracture extent was estimated analytically using an equilibrium stress distribution calculated after the shock wave propagation through the sample. Reduction in the gas pressure due to the leakage of the explosive products through the crack as a function of time was accounted for. In conclusion, the estimated fracture lengths were in agreement with the experimentally observed fracture lengths.

15 GEOTHERMAL ENERGY↗

A chemical dynamics study on the gas-phase formation of triplet and singlet C 5 H 2 carbenes

Significance Carbenes represent key reactive intermediates in molecular mass growth processes leading to carbonaceous nanostructures in the interstellar medium and in combustion systems. However, due to their short lifetimes and tendency for dimerization, carbenes represent one of the foremost obscured classes of reactive intermediates, with the preparation of carbenes in the gas phase remaining largely elusive. By merging molecular beams with electronic structure and quasi-classical trajectory calculations and exploiting triplet pentadiynylidene (HCCCCCH) and singlet ethynylcyclopropenylidene (c-C 5 H 2 ) carbene as benchmarks, we present a versatile protocol to unravel the dynamics leading to exotic carbenes under single-collision conditions. These elementary mechanisms are of significance to our understanding of the fundamental processes leading to unsaturated organic transients in extreme, hydrocarbon-rich environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THE FIRST SPECTROSCOPICALLY RESOLVED SUB-PARSEC ORBIT OF A SUPERMASSIVE BINARY BLACK HOLE

One of the most intriguing scenarios proposed to explain how active galactic nuclei are triggered involves the existence of a supermassive binary black hole (BH) system in their cores. Here, we present an observational evidence for the first spectroscopically resolved sub-parsec orbit of a such system in the core of Seyfert galaxy NGC 4151. Using a method similar to those typically used for spectroscopic binary stars, we obtained radial velocity curves of the supermassive binary system, from which we calculated orbital elements and made estimates about the masses of the components. Our analysis shows that periodic variations in the light and radial velocity curves can be accounted for by an eccentric, sub-parsec Keplerian orbit with a 15.9 year period. The flux maximum in the light curve corresponds to the approaching phase of the secondary component toward the observer. According to the obtained results, we speculate that the periodic variations in the observed H{alpha} line shape and flux are due to shock waves generated by the supersonic motion of the components through the surrounding medium. Given the large observational effort needed to reveal this spectroscopically resolved binary orbital motion, we suggest that many such systems may exist in similar objects even if they are hard to find. Detecting more of them will provide us with insight into the BH mass growth process.

79 ASTRONOMY AND ASTROPHYSICS↗

A CROSS-CORRELATION ANALYSIS OF ACTIVE GALACTIC NUCLEI AND GALAXIES USING VIRTUAL OBSERVATORY: DEPENDENCE ON VIRIAL MASS OF SUPERMASSIVE BLACK HOLE

We present results of the cross-correlation analysis between active galactic nuclei (AGNs) and galaxies at redshift 0.1-1. We obtain data of ∼10, 000 Sloan Digital Sky Survey AGNs in which their virial masses with a supermassive black hole (SMBH) were estimated. The UKIDSS galaxy samples around the AGNs were obtained using the virtual observatory. The scale length of AGN-galaxy cross-correlation for all of the samples is measured to be r{sub 0}= 5.8{sup +0.8}{sub -0.6} h{sup -1} Mpc (for the fixed slope parameter γ = 1.8). We also derived a dependence of r{sub 0} on the BH mass, M{sub BH}, and found an indication of an increasing trend of r{sub 0} at M{sub BH} > 10{sup 8} M{sub ☉}. It is suggested that the growth of SMBHs is mainly driven by interactions with the surrounding environment for M{sub BH} > 10{sup 8} M{sub ☉}. On the other hand, at M{sub BH} ∼< 10{sup 8} M{sub ☉}, we did not find the BH mass dependence. This would imply that for less massive BHs, the mass growth process can be different from that for massive BHs.

79 ASTRONOMY AND ASTROPHYSICS↗

In situ capping for size control of monochalcogenides (ZnS, CdS, and SnS) nanocrystals produced by anaerobic metal-reducing bacteria

Metal monochalcogenide quantum dot nanocrystals of ZnS, CdS and SnS were prepared by anaerobic, metal-reducing bacteria using in situ capping by oleic acid or oleylamine. Furthermore, the capping agent preferentially adsorbs on the surface of the nanocrystal, suppressing the growth process in the early stages, thus leading to production of nanocrystals with a diameter of less than 5 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermal scanning probe and laser lithography for patterning nanowire based quantum devices

Semiconductor nanowire (NW) quantum devices offer a promising path for the pursuit and investigation of topologically-protected quantum states, and superconducting and spin-based qubits that can be controlled using electric fields. Theoretical investigations into the impact of disorder on the attainment of dependable topological states in semiconducting nanowires with large spin–orbit coupling and g-factor highlight the critical need for improvements in both growth processes and nanofabrication techniques. In this work, we used a hybrid lithography tool for both the high-resolution thermal scanning probe lithography and high-throughput direct laser writing of quantum devices based on thin InSb nanowires with contact spacing of 200 nm. Electrical characterization demonstrates quasi-ballistic transport. The methodology outlined in this study has the potential to reduce the impact of disorder caused by fabrication processes in quantum devices based on 1D semiconductors.

36 MATERIALS SCIENCE↗

Local environment of Mn in Mn delta-doped Si layers

Dilute magnetic semiconductors combine both magnetic ordering and semiconducting behaviour, leading to potential spintronic applications. Silicon containing dilute Mn impurities is a potential dilute magnetic semiconductor. We have grown Mn delta-doped films by deposition of 0.7 of a monolayer of Mn on Si(001) by molecular beam epitaxy and capping the film with Si. The magnetic properties are likely sensitive to the distribution of Mn on substitutional or interstitial sites and the formation of metallic precipitates. We have used polarization-dependent XAFS to examine the local structure. We compare to a thicker MnSi film grown on Si(111) and also examine the influence of lead on the manganese environment when used as a surfactant in the growth process.

36 MATERIALS SCIENCE↗

Large-area synthesis of high-quality monolayer 1T’-WTe 2 flakes

Large-area growth of monolayer films of the transition metal dichalcogenides is of the utmost importance in this rapidly advancing research area. The mechanical exfoliation method offers high quality monolayer material but it is a problematic approach when applied to materials that are not air stable. One important example is 1T’-WTe 2 , which in multilayer form is reported to possess a large non saturating magnetoresistance, pressure induced superconductivity, and a weak antilocalization effect, but electrical data for the monolayer is yet to be reported due to its rapid degradation in air. Here we report a reliable and reproducible large-area growth process for obtaining many monolayer 1T’-WTe 2 flakes. We confirmed the composition and structure of monolayer 1T’-WTe 2 flakes using x-ray photoelectron spectroscopy, energy-dispersive x-ray spectroscopy, atomic force microscopy, Raman spectroscopy and aberration corrected transmission electron microscopy. We studied the time dependent degradation of monolayer 1T’-WTe 2 under ambient conditions, and we used first-principles calculations to identify reaction with oxygen as the degradation mechanism. Finally we investigated the electrical properties of monolayer 1T’-WTe 2 and found metallic conduction at low temperature along with a weak antilocalization effect that is evidence for strong spin–orbit coupling.

36 MATERIALS SCIENCE↗