SEARCH · Engineering Papers

Results for “example”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

All sources NASA NTRS DOE OSTI

NASA NTRS1973

ERTS Applications in earthquake research and mineral exploration in California

Examples that ERTS imagery can be effectively utilized to identify, locate, and map faults which show geomorphic evidence of geologically recent breakage are presented. Several important faults not previously known have been identified. By plotting epicenters of historic earthquakes in parts of California, Sonora, Mexico, Arizona, and Nevada, we found that areas known for historic seismicity are often characterized by abundant evidence of recent fault and crustal movements. There are many examples of seismically quiet areas where outstanding evidence of recent fault movements is observed. One application is clear: ERTS-1 imagery could be effectively utilized to delineate areas susceptible to earthquake recurrence which, on the basis of seismic data alone, may be misleadingly considered safe. ERTS data can also be utilized in planning new sites in the geophysical network of fault movement monitoring and strain and tilt measurements.

Abdel-Gawad, M.↗

NASA NTRS1972

Teleconferencing: Cost optimization of satellite and ground systems for continuing progressional education and medical services

A set of analytical capabilities that are needed to assess the role satellite communications technology will play in public and other services was developed. It is user oriented in that it starts from descriptions of user demand and develops the ability to estimate the cost of satisfying that demand with the lowest cost communications system. To ensure that the analysis could cope with the complexities of the real users, two services were chosen as examples, continuing professional education and medical services. Telecommunications costs are effected greatly by demographic factors, involving distribution of users in urban areas and distances between towns in rural regions. For this reason the analytical tools were exercised on sample locations. San Jose, California and Denver, Colorado were used to represent an urban area and the Rocky Mountain states were used to represent a rural region. In assessing the range of satellite system costs, two example coverage areas were considered, one appropriate to cover the contiguous forty-eight states, a second appropriate to cover about one-third that area.

Dunn, D.↗

NASA NTRS1973

Computerized Preliminary Design at the Early Stages of Vehicle Definition

Criteria for acceptance of early design information, modern methods of providing it, and suggestions for defining adequate levels of resources to accomplish the objectives of the activity are described. Specific examples of the most difficult type of early design studies, those requiring significant undeveloped technology, are used to discuss these points. The examples include design studies and cost estimates of liquid hydrogen fueled aircraft, oblique winged aircraft and remotely piloted vehicles.

Gregory, T. J.↗

NASA NTRS1972

The Role of the Manufacturer in Air Transportation Planning

The role of the aircraft manufacturer in the airline industry is considered. The process is illustrated by using a fictitious airline as an example--that is, a case study approach with Mid-Coast Airways serving as the example. Both in slide form and with supporting papers, a brief history of the airline, a description of its route structure and a forecast based on econometric analysis are presented. Once the forecast rationale is explained, information outlines the requirements for additional aircraft and the application of new aircraft across the system using alternative fleet plan options. The fleet plan is translated into financial summaries which indicate the relative merit of alternative aircraft types or operating plans.

Mackenzie, J.↗

NASA NTRS1973

Spectral ratio imaging methods for geological remote sensing from aircraft and satellites

The author has identified the following significant results. The production of ratio images from multispectral scanner data is described and several examples of ratio images from aircraft and ERTS-1 data are given for visible, reflective infrared, and thermal infrared wavelengths. The application of photogrammetric techniques to ratio images, defined for this paper as ratio scannergrammetry, is considerably aided by the lesser dependence of ratio images on atmospheric and solar illumination variations, compared with single channel scanner imagery or aerial photos. Ratio scannergrammetry is further aided by the proportionality between ratios of a target deduced from ratio images and ratios of reflectances calculated from laboratory spectra of samples from the target area. Consequently, ratios calculated from laboratory data can be used to predict which ratios are best for discriminating a given rock or mineral, to predict what other rocks or minerals will be confused with it, and finally, to place ratio scannergrammetry on an absolute basis, within an estimated standard error on the order of 5% to 10%. Examples of relative agreement between laboratory data and ratio images are given from two iron oxides, hematite and magnetite.

Vincent, R. K.↗

NASA NTRS1972

SYSTID - A flexible tool for the analysis of communication systems.

Description of the System Time Domain Simulation (SYSTID) computer-aided analysis program which is specifically structured for communication systems analysis. The SYSTID program is user oriented so that very little knowledge of computer techniques and very little programming ability are required for proper application. The program is designed so that the user can go from a system block diagram to an accurate simulation by simply programming a single English language statement for each block in the system. The mathematical and functional models available in the SYSTID library are presented. An example problem is given which illustrates the ease of modeling communication systems. Examples of the outputs available are presented, and proposed improvements are summarized.

Dawson, C. T.↗

NASA NTRS1973

Parametric description of thermospheric ion composition results.

Results of an attempt to accumulate an ion composition data base for an international reference ionosphere (IRI) with the aid of polar-orbiting satellites. A progress report is presented on the preparation of the results from the Bennett RF ion spectrometer experiment on Ogo 4 and 6 using the most extensive set of thermospheric ion composition data yet available. An example of the pole-to-pole distributions of all ions detected by the spectrometer on Ogo 6 is given which shows considerable structure resulting from both altitude and latitude variations. Also, an example is given of the type of analysis made possible by the combined scope of the Ogo ion composition data base and the IRI statistical sorting routine.

Taylor, H. A., Jr.↗

NASA NTRS1973

The Apollo 17 Lunar Sounder.

The Apollo Lunar Sounder Experiment (ALSE) was a three-frequency wide-band coherent radar system operated from lunar orbit during the Apollo 17 mission. The scientific objectives of the experiment include the mapping of subsurface structure, surface profiling, surface imaging, and galactic noise measurement. Examples of subsurface reflections are discussed, giving attention to VHF sounding, HF2 sounding, and HF1 sounding. Examples of imagery and profiles are also considered, taking into account various craters and profile high points.

Phillips, R. J.↗

NASA NTRS1973

An approach to the synthesis of separate surface automatic flight control systems.

A method is presented for the analysis of separate surface automatic flight control systems. The feasibility of such systems is demonstrated by the analysis of an example system, a separate surface wing-leveler for a Cessna 172. This example system employs a separate surface aileron with 15% of the basic airplane roll control power. A 90% reduction in bank-angle gust response can be obtained when compared with the basic airplane. The system does not feed back to the pilot's wheel. When failed (even hardover) the pilot retains more than adequate control of the airplane.

Roskam, J.↗

NASA NTRS1973

A 'type one' servo explicit model following adaptive scheme.

This paper describes 'type 1' servo techniques applied to explicit model following systems. The advantages of using these are: (1) steady-state decoupling is provided for the controlled state variables as determined by a reference input (the pilot command for example), (2) overall stability of the decoupled adaptive scheme is guaranteed, (3) a zero steady-state error for those state variables incorporating integral feedback, to a constant input reference, and (4) improved transient performance. Example calculations have been performed using a mathematical model for a typical fighter aircraft and a desired performance reference model based on satisfactory aircraft flying qualities. Numerical results are given.

Tiroshi, I.↗

NASA NTRS1972

The interpretation of spectral data

The characteristics and extent of data which is obtainable by electromagnetic spectrum sensing and the application to earth resources survey are discussed. The wavelength and frequency ranges of operation for various remote sensors are tabulated. The spectral sensitivities of various sensing instruments are diagrammed. Examples of aerial photography to show the effects of lighting and seasonal variations on earth resources data are provided. Specific examples of multiband photography and multispectral imagery to crop analysis are included.

Holter, M. R.↗

NASA NTRS1973

Approximations in the minimum time-to-climb problem

The minimum time-to-climb problem is formulated as a third order system and three approximate solutions based on reduced order systems are presented. The first of these is the often used energy state, the second is the less frequently used two state and the third is a slightly altered form of the second, herein called the modified two state. These three approximations are discussed and compared both qualitatively and, by using a numerical example, quantitatively. The numerical example is also solved by the steepest descent method to provide a basis for comparison. It is concluded that the modified two state approximation is significantly better than the other two. This approximation is used to assess the sensitivity of climb performance to various vehicle parameters and it is found that, as expected, thrust and weight influence the time-to-climb most strongly.

Ardema, M. D.↗

NASA NTRS1973

Medical electronics: A need and a challenge

Space programs have led to the development of telemetry pills for diagnosis of diseases of the digestive tract, reusable X-ray image storage plates that require no chemical processing, and muscular augmentation systems for the handicapped. These examples, together with countless other examples of technological innovation that can be drawn from research and development programs supported by government funds, offer a potential opportunity to stimulate growth and to control rising costs in medical electronics.

Dimeoff, J.↗

NASA NTRS1973

NASTRAN cyclic symmetry capability

A development for NASTRAN which facilitates the analysis of structures made up of identical segments symmetrically arranged with respect to an axis is described. The key operation in the method is the transformation of the degrees of freedom for the structure into uncoupled symmetrical components, thereby greatly reducing the number of equations which are solved simultaneously. A further reduction occurs if each segment has a plane of reflective symmetry. The only required assumption is that the problem be linear. The capability, as developed, will be available in level 16 of NASTRAN for static stress analysis, steady state heat transfer analysis, and vibration analysis. The paper includes a discussion of the theory, a brief description of the data supplied by the user, and the results obtained for two example problems. The first problem concerns the acoustic modes of a long prismatic cavity imbedded in the propellant grain of a solid rocket motor. The second problem involves the deformations of a large space antenna. The latter example is the first application of the NASTRAN Cyclic Symmetry capability to a really large problem.

Macneal, R. H.↗

NASA NTRS1974

Remote sensing in agriculture

Some examples are presented of the use of remote sensing in cultivated crops, forestry, and range management. Areas of concern include: the determination of crop areas and types, prediction of yield, and detection of disease; the determination of forest areas and types, timber volume estimation, detection of insect and disease attack, and forest fires; and the determination of range conditions and inventory, and livestock inventory. Articles in the literature are summarized and specific examples of work being performed at the Marshall Space Flight Center are given. Primarily, aerial photographs and photo-like ERTS images are considered.

Downs, S. W., Jr.↗

NASA NTRS1974

Design of a digital controller for spinning flexible spacecraft

An approach to digital control system design is applied to the analysis and design of a practical onboard digital attitude control system for a class of spinning vehicles characterized by a rigid body and two connected flexible appendages. The approach used is to design a continuous-data control system that will provide a satisfactory system response. Then, using the digital redesign method, a digital controller with onboard digital computer is designed to provide a digital control system whose states are similar to those of the continuous system at sampling instants. The simplicity of application of this approach is indicated by example. The example, using spinning Skylab parameters, is used to substantiate the conclusions.

Kuo, B. C.↗

NASA NTRS1974

Interior radiances in optically deep absorbing media. 3: Scattering from Haze L

The interior radiances are calculated within an optically deep absorbing medium scattering according to the Haze L phase function. The dependence on the solar zenith angle, the single scattering albedo, and the optical depth within the medium is calculated by the matrix operator method. The development of the asymptotic angular distribution of the radiance in the diffusion region is illustrated through a number of examples; it depends only on the single scattering albedo and on the phase function for single scattering. The exact values of the radiance in the diffusion region are compared with values calculated from the approximate equations proposed by Van de Hulst. The variation of the radiance near the lower boundary of an optically thick medium is illustrated with examples. The attenuation length is calculated for various single scattering albedos and compared with the corresponding values for Rayleigh scattering. The ratio of the upward to the downward flux is found to be remarkably constant within the medium. The heating rate is calculated and found to have a maximum value at an optical depth of two within a Haze L layer when the sun is at the zenith.

Kattawar, G. W.↗

NASA NTRS1974

Design of FIR digital filters for pulse shaping and channel equalization using time-domain optimization

Three algorithms are developed for designing finite impulse response digital filters to be used for pulse shaping and channel equalization. The first is the Minimax algorithm which uses linear programming to design a frequency-sampling filter with a pulse shape that approximates the specification in a minimax sense. Design examples are included which accurately approximate a specified impulse response with a maximum error of 0.03 using only six resonators. The second algorithm is an extension of the Minimax algorithm to design preset equalizers for channels with known impulse responses. Both transversal and frequency-sampling equalizer structures are designed to produce a minimax approximation of a specified channel output waveform. Examples of these designs are compared as to the accuracy of the approximation, the resultant intersymbol interference (ISI), and the required transmitted energy. While the transversal designs are slightly more accurate, the frequency-sampling designs using six resonators have smaller ISI and energy values.

Houts, R. C.↗