Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron transfer processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Providing hydrogen maser timing stability to orbiting VLBI radio telescope observations by post-measurement compensation of linked frequency standard imperfections

Orbiting VLBI (OVLBI) astronomical observations are based upon measurements acquired simultaneously from ground-based and earth-orbiting radio telescopes. By the mid-1990s, two orbiting VLBI observatories, Russia's Radioastron and Japan's VSOP, will augment the worldwide VLBI network, providing baselines to earth radio telescopes as large as 80,000 km. The challenge for OVLBI is to effectuate space to ground radio telescope data cross-correlation (the observation) to a level of integrity currently achieved between ground radio telescopes. VLBI radio telescopes require ultrastable frequency and timing references in order that long term observations may be made without serious cross-correlation loss due to frequency source drift and phase noise. For this reason, such instruments make use of hydrogen maser frequency standards. Unfortunately, space-qualified hydrogen maser oscillators are currently not available for use on OVLBI satellites. Thus, the necessary long-term stability needed by the orbiting radio telescope may only be obtained by microwave uplinking a ground-based hydrogen maser derived frequency to the satellite. Although the idea of uplinking the frequency standard intrinsically seems simple, there are many 'contaminations' which degrade both the long and short term stability of the transmitted reference. Factors which corrupt frequency and timing accuracy include additive radio and electronic circuit thermal noise, slow or systematic phase migration due to changes of electronic circuit temporal operating conditions (especially temperature), ionosphere and troposphere induced scintillations, residual Doppler-incited components, and microwave signal multipath propagation. What is important, though, is to realize that ultimate stability does not have to be achieved in real-time. Instead, information needed to produce a high degree of coherence in the subsequent cross-correlation operation may be derived from a two-way coherent radio link, recorded and later introduced as compensations adjunct to the VLBI correlation process. Accordingly, this paper examines the technique for stable frequency/time transfer within the OVLBI system, together with a critique of the types of link degradation components which must be compensated, and the figures of merit known as coherence factors.

Springett, James C.↗

Coupling a Computational Fluid Dynamics (CFD) Model to a Spacecraft Thermal System Model for the DraMS Instrument Thermal Analysis

The Dragonfly Mass Spectrometer (DraMS) is an instrument on the Dragonfly mission, which will spend 7 years in deep space cruise before landing and operating on the surface of Titan. Vacuum thermal analyses are required for deep space cruise, and convection analyses are required for the Titan surface operations. Model exchanges across multiple thermal teams are needed for all phases of the mission. For DraMS, Thermal Desktop (TD) has been the main thermal analytical tool of choice due to its capability in modeling complex thermal systems with relatively low computational power and for its availability across thermal teams. However, TD does not have computational fluid dynamics (CFD) capability and struggles to accurately capture complex convective behavior. DraMS has fans operating in tandem and gas flow behaviors are not easily predicted due to its complex flow paths. CFD software, such as Fluent, can model and predict such complex flow behaviors, but CFD models are computationally expensive, and its workflow processes are not tailored towards simulating large and complex systems. Therefore, a coupled modeling approach was chosen for DraMS: A TD model was used for simulating all the conductive, radiative, and source terms, while a Fluent CFD model was added on, as needed, to the TD model to provide the convective boundary conditions using the System Coupling software. The coupling software allows the TD and Fluent models to communicate data and arrive at a co-solved and co-converged solution. Furthermore, Thermal Iso-value Exchange (TIE) method was developed to facilitate and improve the TD-Fluent data exchange process. This paper will discuss the analytical studies that were done to verify the accuracy and usability of the coupled approach and the challenges associated, which lead to the development of the TIE approach. DraMS thermal design and co-solved analysis results will also be discussed.

heat transfer↗

Long‐Range Electron Transport Rates Depend on Wire Dimensions in Cytochrome Nanowires

Abstract The ability to redirect electron transport to new reactions in living systems opens possibilities to store energy, generate new products, or probe physiological processes. Recent work by Huang et al. showed that 3D crystals of small tetraheme cytochromes (STC) can transport electrons over nanoscopic to mesoscopic distances by an electron hopping mechanism, making them promising materials for nanowires. However, fluctuations at room temperature may distort the nanostructure, hindering efficient electron transport. Classical molecular dynamics simulations of these fluctuations at the nano‐ and mesoscopic scales allowed us to develop a graph network representation to estimate maximum electron flow that can be driven through STC wires. In longer nanowires, transient structural fluctuations at protein‐protein interfaces tended to obstruct efficient electron transfer, but these blockages are ameliorated in thicker crystals where alternative electron transfer pathways become more efficient. The model implies that more flexible proteinprotein interfaces limit the required minimum diameter to carry currents commensurate with conventional electronics.

Chemistry↗

Computational synthesis of 2D materials: A high-throughput approach to materials design

2D materials find promising applications in next-generation devices, however, large-scale, low-defect, and reproducible synthesis of 2D materials remains a challenging task. Here, to assist in the selection of suitable substrates for the synthesis of as-yet hypothetical 2D materials, we have developed an open-source high-throughput workflow package, Hetero2d, that searches for low-lattice mismatched substrate surfaces for any 2D material and determines the stability of these 2D-substrate heterostructures using density functional theory (DFT) simulations. Hetero2d automates the generation of 2D-substrate heterostructures, the creation of DFT input files, the submission and monitoring of computational jobs on supercomputing facilities, and the storage of relevant parameters alongside the post-processed results in a MongoDB database. We demonstrate the capability of Hetero2d in identifying stable 2D-substrate heterostructures for four 2D materials, namely 2H-MoS 2 , 1T- and 2H-NbO 2 , and hexagonal-ZnTe, considering 50 cubic elemental substrates. We find Cu, Hf, Mn, Nd, Ni, Pd, Re, Rh, Sc, Ta, Ti, V, W, Y, and Zr substrates sufficiently stabilize the formation energies of these 2D materials, with binding energies in the range of ~0.1–0.6 eV/atom. Upon examining the z-separation, the charge transfer, and the electronic density of states at the 2D-substrate interface, we find a covalent type bonding at the interface which suggests that these substrates can be used as contact materials for the 2D materials. Hetero2d is available on GitHub as an open-source package under the GNU license.

36 MATERIALS SCIENCE↗

Mechanism of Catechol Oxidation by the Coupled Bicupric Active Site of Tyrosinase: Completion of the Oxygenase/Oxidase Reaction Cycle

Tyrosinase contains a coupled binuclear copper (CBC) active site, which in its bicuprous form (deoxy-Ty) binds O 2 to form a side-on peroxide [Cu(II) 2 O 2 ] 2+ intermediate (oxy-Ty) that performs the regioselective monooxygenation of monophenols to catechols and their subsequent 2e − oxidation to quinones. Previously, we used spectroscopic, kinetic, and computational methods to elucidate the mechanism of the initial steps in the monooxygenation reaction. Herein, we investigated the final step in catecholate formation and provide experimental and computational results elucidating the catechol oxidation reaction, formally a proton-coupled 2e − process. We employed single-turnover stoppedflow absorption to observe the elusive catecholate-Cu(II) 2 OH intermediate via the anaerobic reaction of resting Cu(II) 2 OH Ty (met-Ty) with the catecholate substrate. This intermediate was cryo-trapped and characterized by electron paramagnetic resonance and X-ray absorption spectroscopies. These experimental results were correlated to quantum mechanics/molecular mechanics (QM/MM) and QM calculations to describe the complete catalytic cycle of tyrosinase, revealing that the 2e − oxidation of catechol to quinone involves two steps: (i) coupled 1H + /1e − transfer from the bound monoanionic catecholate to the bridged hydroxide of the met-Ty active site, followed by (ii) the second 1e − transfer. The latter is calculated to be the rate-limiting step in catechol oxidation, confirmed by experimental solvent kinetic isotope effect studies. Our computational data suggest that quinone release from the protein provides the necessary driving force for this reaction. These results establish a detailed description of this oxidase cycle of the tyrosinase mechanism and more broadly provide molecular-level insights into the diverse reactivity of CBC sites in biology.

QM/MM modeling↗

Understanding the Competition between Alcohol Formation and Dimerization during Electrochemical Reduction of Aromatic Carbonyl Compounds

The electrochemical reductive dimerization of small aromatic carbonyl compounds derived from lignocellulosic biomass is a crucial C−C coupling reaction for upgrading small molecules to longchain hydrocarbons, particularly in the synthesis of drop-in sustainable aviation fuels. Although other electrochemical reduction reactions of these reactants (i.e., hydrogenation and hydrogenolysis) have undergone extensive mechanistic investigation, the understanding of dimerization remains relatively underdeveloped. Most importantly, there is a lack of understanding of the selectivity-determining step between dimerization and monomer reduction and critical factors that can affect this step. In this study, we provide a comprehensive mechanistic model to explain the competition between dimerization and monomer reduction of benzaldehyde under various conditions. Our model proposes that the selectivity between dimerization and monomer reduction depends on the competition between desorption of a ketyl radical from the electrode, necessary for dimerization, and further reduction of the ketyl radical to an alcohol on the electrode by proton-coupled electron transfer (PCET). Computationally comparing the adsorption/desorption energy and PCET activation barrier energy is challenging because conventional DFT calculations substantially underestimate the PCET kinetic barriers. In this study, we employed constrained DFTbased configuration interaction (CDFT-CI) to obtain a reliable comparison of these energies. Our mechanistic model was tested and supported by experimental results obtained with four electrodes (Cu, Pb, Bi, graphite), three pH conditions (acidic, neutral, basic), and three potentials. Our study offers a coherent mechanistic foundation that can explain how each of these conditions impacts the desorption and PCET processes and the selectivities for dimerization and alcohol production.

09 BIOMASS FUELS↗

Transition metal dichalcogenide monolayers in an ultrashort optical pulse: Femtosecond currents and anisotropic electron dynamics

We theoretically study the interaction of an ultrafast intense linearly polarized optical pulse with monolayers of transition metal dichalcogenides (TMDCs). Such a strong pulse redistributes electrons between the bands and generates femtosecond currents during the pulse. Due to the large bandwidth of the incident pulse, this process is completely an off-resonant. While in TMDCs, the time-reversal symmetry is conserved, the inversion symmetry is broken, and these monolayers have axial symmetry along the armchair direction but not along with the zigzag one. The pulse, polarized along with asymmetric directions of TMDC monolayer, generates both longitudinal, i.e., along the direction of polarization, and transverse, i.e., in the perpendicular direction, currents. Such currents result in charge transfer through the system. Finally, we study different TMDC materials and show how the femtosecond transport in TMDC monolayers depend on their parameters, such as lattice constant and bandgap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Digitization and JPEG Compression on Land Cover Classification Using Astronaut-Acquired Orbital Photographs

Studies that utilize astronaut-acquired orbital photographs for visual or digital classification require high-quality data to ensure accuracy. The majority of images available must be digitized from film and electronically transferred to scientific users. This study examined the effect of scanning spatial resolution (1200, 2400 pixels per inch [21.2 and 10.6 microns/pixel]), scanning density range option (Auto, Full) and compression ratio (non-lossy [TIFF], and lossy JPEG 10:1, 46:1, 83:1) on digital classification results of an orbital photograph from the NASA - Johnson Space Center archive. Qualitative results suggested that 1200 ppi was acceptable for visual interpretive uses for major land cover types. Moreover, Auto scanning density range was superior to Full density range. Quantitative assessment of the processing steps indicated that, while 2400 ppi scanning spatial resolution resulted in more classified polygons as well as a substantially greater proportion of polygons < 0.2 ha, overall agreement between 1200 ppi and 2400 ppi was quite high. JPEG compression up to approximately 46:1 also did not appear to have a major impact on quantitative classification characteristics. We conclude that both 1200 and 2400 ppi scanning resolutions are acceptable options for this level of land cover classification, as well as a compression ratio at or below approximately 46:1. Auto range density should always be used during scanning because it acquires more of the information from the film. The particular combination of scanning spatial resolution and compression level will require a case-by-case decision and will depend upon memory capabilities, analytical objectives and the spatial properties of the objects in the image.

Robinson, Julie A.↗

Oxidation of the Mantle Wedge by H+ in Aqueous Fluids: A New Interdisciplinary Approach

The observation that arc magmas are the most oxidized on Earth have led petrologists to question whether the subduction process might cause oxidation of the sub-arc mantle source. A strong correlation between the input of slab-derived aqueous fluid and Fe3(+)/ΣFe in arc magmas has led to the hypothesis that slab fluids may facilitiate the transfer of redox potential from oxidized slab material to mantle wedge and subsequently to primary arc melts. Despite this intuitive link, identifying an efficient and ubiquitous chemical process to transfer oxidation state in slab fluids has been challenging. Pure H2O alone is an inefficient oxidizer in the mantle, necessitating another oxidant within the fluid. Commonly invoked components include S or C, which are likely heterogeneously distributed within subducting slabs, and direct transfer of Fe3(+), which is only possible in very solute-rich fluids. Here we present a new mechanism to explain the oxidation of the sub-arc mantle by slab-derived aqueous fluid, wherein dissolved H(+)(aq) is reduced to H2(aq). Redox equilibrium is satisfied by electron transfer from Fe2(+)(s), which is oxidized in the rock to Fe3(+)(s) in the reaction: 2Fe2(+)(s) + 2H(+)(aq) = 2Fe3(+)(s) + H2(aq). This simple reaction was previously overlooked due to the assumption that all H must be bound by H2O molecules (i.e., no dissolved H), applicable to a pure H2O fluid, but not one with a solute load as addressed here. The application of thermodynamic modeling tools from aqueous geochemistry (DEW, EQ3/6) to mantle petrology predicts this reaction between mantle rock and slab fluid with our own experimentally constrained chemistry and fO2 (QFM+2). Mass transfer model results show an increase in Fe3(+)/ΣFe in mantle rock from MORB- like (0.15) to arc-like (0.2–0.3) values at reasonable fluid fluxes, co-incident with increasing H2 activity in the fluid. This can explain the stark correlation between slab fluid input into the mantle wedge and the observed fO2 of arc magmas. Moreover, it does not require diffusion of hydrogen out of the system. Instead, H2 remains dissolved in fluid in equilibrium with oxidized mantle rock.

Iacovino, Kayla↗

A distributed processing high data rate multiport wind-tunnel pressure measurement system

A multiport pressure measurement system has been developed for the high data rates and the in situ calibration of electronically scanned pressure (ESP) sensors. The system employs a stand-alone microcomputer, connected to a host computer, for data acquisition and preprocessing. The host computer provides several operational modes. Before each run the in situ calibration of each sensor is automatically performed. Using up to a maximum of 14 data acquisition and control units (DACU's), the system may be expanded from 16 to 10,752 pressure ports. Each DACU can make 20,000 measurements per second, average data, and perform statistical analyses before transferring data to the central unit. The system may be introduced into existing facilities and requires little user orientation.

Juanarena, D.↗

Spin-Vibronic Effect in Photoinduced Electron Transfer

The spin-vibronic effect (SVE) accelerates quantum-mechanically forbidden electronic transitions, but experimental manifestations of this phenomenon remain limited. In this contribution, the role of SVE in photoinduced electron transfer (PET) dynamics is probed by coherent vibrational wavepacket (CVWP) motions in Pt­(II) dimer-naphthalene diimide donor–acceptor complexes. Metal–metal-to-ligand charge-transfer (MMLCT) excitation of the donor triggers ballistic PET, driving the molecule away from equilibrium. The SVE then directs the PET trajectory from the 1 MMLCT excited state to an intermediate ligand-centered triplet state, modulating the CVWP dynamics along the reaction coordinates. Herzberg–Teller type oscillations indicate that the Pt–Pt stretching vibration, arising from the formation of the excited triplet intermediate, serves as the reaction coordinate for charge separation. Finally, our experimental findings advance the understanding of the interplay between electronic, vibrational, and spin degrees of freedom in ultrafast photoactivated processes.

Kim, Pyosang [Argonne National Laboratory (ANL), A↗

The precision-processing subsystem for the Earth Resources Technology Satellite.

Description of the precision processor, a subsystem in the image-processing system for the Earth Resources Technology Satellite (ERTS). This processor is a special-purpose image-measurement and printing system, designed to process user-selected bulk images to produce 1:1,000,000-scale film outputs and digital image data, presented in a Universal-Transverse-Mercator (UTM) projection. The system will remove geometric and radiometric errors introduced by the ERTS multispectral sensors and by the bulk-processor electron-beam recorder. The geometric transformations required for each input scene are determined by resection computations based on reseau measurements and image comparisons with a special ground-control base contained within the system; the images are then printed and digitized by electronic image-transfer techniques.

Chapelle, W. E.↗

Photosensor with enhanced quantum efficiency

A method to significantly increase the quantum efficiency (QE) of a CCD (or similar photosensor) applied in the UV, far UV and low energy x-ray regions of the spectrum. The increase in QE is accomplished by overthinning the backside of a CCD substrate beyond the epitaxial interface and UV flooding the sensor prior to use. The UV light photoemits electrons to the thinned surface and charges the backside negatively. This in turn forms an accumulation layer of holes near the Si-SiO.sub.2 interface creating an electric field gradient in the silicon which directs the photogenerated signal to the frontside where they are collected in pixel locations and later transferred. An oxide film, in which the backside charge resides, must have quality equivalent to a well aged native oxide which typically takes several years to form under ambient conditions. To reduce the amount of time in growing an oxide of sufficient quality, a process has been developed to grow an oxide by using deionized steam at 95.degree. C. which takes less than one hour to grow.

Janesick, James R.↗

Carbon Nanotube Based Chemical Sensors for Space and Terrestrial Applications

A nanosensor technology has been developed using nanostructures, such as single walled carbon nanotubes (SWNTs), on a pair of interdigitated electrodes (IDE) processed with a silicon-based microfabrication and micromachining technique. The IDE fingers were fabricated using photolithography and thin film metallization techniques. Both in-situ growth of nanostructure materials and casting of the nanostructure dispersions were used to make chemical sensing devices. These sensors have been exposed to nitrogen dioxide, acetone, benzene, nitrotoluene, chlorine, and ammonia in the concentration range of ppm to ppb at room temperature. The electronic molecular sensing of carbon nanotubes in our sensor platform can be understood by intra- and inter-tube electron modulation in terms of charge transfer mechanisms. As a result of the charge transfer, the conductance of p-type or hole-richer SWNTs in air will change. Due to the large surface area, low surface energy barrier and high thermal and mechanical stability, nanostructured chemical sensors potentially can offer higher sensitivity, lower power consumption and better robustness than the state-of-the-art systems, which make them more attractive for defense and space applications. Combined with MEMS technology, light weight and compact size sensors can be made in wafer scale with low cost. Additionally, a wireless capability of such a sensor chip can be used for networked mobile and fixed-site detection and warning systems for military bases, facilities and battlefield areas.

Li, Jing↗

Analysis and design of fast flow liquid Li divertor for fusion nuclear science facility (FNSF) using coupled plasma boundary and LM MHD/heat transfer codes *

The SOLPS-ITER code is utilized to analyze the boundary plasma associated with a fast-flow lithium (Li) divertor configuration in the fusion nuclear science facility (FNSF) tokamak and identify operational regimes with acceptable divertor and core conditions. Plasma transport from the SOLPS-ITER code has been coupled with a liquid metal (LM) MHD/heat transfer code to model a Li open-surface divertor design and assess its impact on the scrape-off-layer (SOL) and core plasma performance. Simulations with only Neon (Ne) impurity seeding have been conducted to evaluate its impact on meeting FNSF design demands for the divertor and upstream plasma parameters. Simulation results indicate that Ne seeding significantly mitigates divertor heat flux but potentially reduces both upstream electron and main ion density due to fuel dilution. The combined application of Ne seeding and deuterium (D 2 ) puffing is required to satisfy the FNSF design requirements on upstream density ($n^{OMP}_{e,sep}$~1× 10 20 m -3 ) and divertor energy flux ($q^{Odiv}_{\bot,max}$<10 MW m -2 ). D 2 puffing plays a role in counteracting upstream density drops and augmenting energy and momentum losses through atomic and molecular processes. The inlet Li flow velocity is systematically varied across a wide range to identify acceptable flows and corresponding LM surface temperatures. This comprehensive analysis identifies the acceptable Li flow parameters, LM surface temperature, and emitted Li fluxes necessary to meet the major design constraints. The emitted Li fluxes exhibit minimal impact on the main plasma at surface temperatures up to approximately ~525 °C, corresponding emitted Li fluxes of up to φ Li ~2X10 23 atoms s -1 . Uncertainties in the Li emission processes from the surface are also investigated, primarily influencing Li loss in the lower surface temperature range (<525 °C), with simulation results indicating a minor impact on the divertor and upstream plasma. Conversely, evaporation predominantly drives the Li loss processes at higher surface temperature ranges (>525 °C), contaminating both the divertor and upstream plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct momentum imaging of charge transfer following site-selective ionization

We study ultrafast charge rearrangement in dissociating 2-iodopropane (2-C 3 H 7 I) using site-selective core-ionization at the iodine atom. Clear signatures of electron transfer between the neutral propyl fragment and multiply charged iodine ions are observed in the recorded delay-dependent ion momentum distributions. The detected charge transfer pathway is only favorable within a small (few angstrom), charge-state-dependent spatial window located at C-I distances longer than that of the neutral ground-state molecule. Lastly, these results offer new insights into the physics underpinning charge transfer in isolated molecules and pave the way for a new class of time-resolved studies.

74 ATOMIC AND MOLECULAR PHYSICS↗

First of Their Kind: Solar Cells with a Dry-Processed Perovskite Absorber Layer via Powder Aerosol Deposition and Hot-Pressing

Preparing halide perovskite films by solvent-free, powder-based processing approaches currently attracts more and more attention. However, working solar cells employing dry, powder-based halide perovskite thin films, have not been demonstrated so far. Herein, perovskite solar cells are presented where the absorber layer is prepared by transferring readily synthesized perovskite powders into a compact thin film using a fully dry-powder-processing concept. Compact thin films are deposited via an optimized powder aerosol deposition (PAD) process. Pressing at 120 °C further improves the morphology and the optoelectronic film properties. Integrating the perovskite films in a solar cell configuration results in fully working devices, with champion power conversion efficiencies of >6%. While the (optoelectronic) properties of the PAD-processed films are found to be comparable with their solution-processed counterparts, investigations of the solar cell stack suggest deterioration of the electron-transport layer properties due to the PAD process, and the presence of hydrates at the perovskite surface to be important factors that contribute to the limited solar cell efficiency. Herein, perspectives to overcome the identified limitations are outlined, emphasizing the high potential and realizability of efficient perovskite solar cells based on dry-powder-processing approaches in the future.

14 SOLAR ENERGY↗

The Rise of Neural Networks for Materials and Chemical Dynamics

Machine learning (ML) is quickly becoming a premier tool for modeling chemical processes and materials. ML-based force fields, trained on large data sets of high-quality electron structure calculations, are particularly attractive due their unique combination of computational efficiency and physical accuracy. This Perspective summarizes some recent advances in the development of neural network-based interatomic potentials. Designing high-quality training data sets is crucial to overall model accuracy. One strategy is active learning, in which new data are automatically collected for atomic configurations that produce large ML uncertainties. Another strategy is to use the highest levels of quantum theory possible. Transfer learning allows training to a data set of mixed fidelity. A model initially trained to a large data set of density functional theory calculations can be significantly improved by retraining to a relatively small data set of expensive coupled cluster theory calculations. These advances are exemplified by applications to molecules and materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗