Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamical core”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Combustion Dynamic Characteristics Identification in a 9-point LDI Combustor Under Choked Outlet Boundary Conditions

Combustion dynamics data were collected at the NASA Glenn Research Center's CE-5 flame tube test facility under combustor outlet choked conditions. Two 9-point Swirl-Venturi Lean Direct Injection (SV-LDI) configurations were tested in a rectangular cuboid combustor geometry. Combustion dynamic data were measured at different engine operational conditions up to inlet air pressure and temperature of 24.13 bar and 828 K, respectively. In this study, the effects of acoustic cavity resonance, precessing vortex core (PVC), and non-uniform thermal expansion on the dynamic noise spectrum are identified by comparing the dynamic data that collected at various combustor inlet conditions along with combustor geometric calculations. The results show that the acoustic cavity resonance noises were seen in the counter-rotating pilot configuration but not in the co-rotating pilot configuration. Dynamic pressure noise band at around 0.9 kHz was only detected at the P'41 location (9.8 cm after fuel injector face) but not at the P'42 location (29 cm after the fuel injector face); the amplitude of this noise band depended on the thermal expansion ratio (T4/T3). The noise band at around 1.8 kHz was found to depend on the inlet air pressure or the air density inside the combustor. The PVC frequency was not observed in these two configurations.

lean direct injection↗
DOE OSTI2021

Table-Top High Photon Energy Sources for Chemical Dynamics Investigations

Time-resolved spectroscopies using high-energy photons in the vacuum ultraviolet (VUV) to the X-ray region of the electromagnetic spectrum, have proven to be powerful probes of chemical dynamics. These high-energy photons can access valence and core orbitals of molecules and materials, providing key information on molecular and electronic structure and their time evolution. This report details the development of table-top sources of extreme ultraviolet (XUV) and VUV pulses at Sandia National Laboratories for use in studies of gas phase chemical dynamics. Femtosecond duration XUV pulses are produced using laser-driven high harmonic generation and their detected range span ~40-140 eV photon energies. These pulses are used in conjunction with ultraviolet pulses in a pump-probe scheme to study excited state dynamics of gas phase molecules. VUV pulses at 7.75 eV are generated using a four-wave-mixing scheme driven by 800 nm and 266 nm pulses in an argon-filled hollow-core fiber.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Safety Benefits Assessment for Accident Tolerant Fuels in Consideration of Steam Generator Tube Degradation Using Dynamic Event Tree Analysis

Accident tolerant fuel (ATF) is expected to delay or prevent core damage by providing additional coping time under accidents involving loss of core cooling. The effect of extended coping time may vary depending on the plant response to accidents. Age-related component degradation that deteriorates plant performance over time could have an impact on the actual advantages of ATF. The potential safety benefits of two near-term ATF candidates, including Cr-coated Zr cladding and FeCrAl cladding, are assessed for a 2-in. loss-of-coolant accident with failed high-pressure safety injection using the dynamic event tree (DET) approach considering possible stress corrosion cracking of steam generator (SG) tubing under aging. The DET approach allows likelihood quantification of accident sequences leading to core damage, including stochastic variation of system response and human actions during accident mitigation. The safety benefits of the selected ATF claddings in terms of additional coping time and the core damage frequency reduction rate under specified accident situations were quantitatively estimated. The results show that the deployment of the two selected ATF claddings is expected to lead to longer coping times and lower core damage frequency due to the wider safety margin to peak cladding temperature they provide. The safety advantages would be greater as SG tube degradation proceeds. Thus, the two ATF candidates would lead to less severe consequences in terms of likelihood of core damage and susceptibility to the SG tube degradation than UO 2 -Zr fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2014

ALMA observations of a misaligned binary protoplanetary disk system in Orion

We present Atacama Large Millimeter/Submillimeter Array (ALMA) observations of a wide binary system in Orion, with projected separation 440 AU, in which we detect submillimeter emission from the protoplanetary disks around each star. Both disks appear moderately massive and have strong line emission in CO 3-2, HCO{sup +} 4-3, and HCN 3-2. In addition, CS 7-6 is detected in one disk. The line-to-continuum ratios are similar for the two disks in each of the lines. From the resolved velocity gradients across each disk, we constrain the masses of the central stars, and show consistency with optical-infrared spectroscopy, both indicative of a high mass ratio ∼9. The small difference between the systemic velocities indicates that the binary orbital plane is close to face-on. The angle between the projected disk rotation axes is very high, ∼72°, showing that the system did not form from a single massive disk or a rigidly rotating cloud core. This finding, which adds to related evidence from disk geometries in other systems, protostellar outflows, stellar rotation, and similar recent ALMA results, demonstrates that turbulence or dynamical interactions act on small scales well below that of molecular cores during the early stages of star formation.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRSDate not supplied

A Computational Study of Plume Modeling For Space Launch System Abort Scenarios

This extended abstract details work on Space Launch System (SLS) core stage drag during abort scenarios that is currently being conducted. In the final paper, viscous computational fluid dynamic simulations will be used to study the axial force coefficient on the SLS core stage as a function of its distance to the upstream crew module and launch abort system, the freestream conditions, and the chemical model used to represent the launch abort system abort motor and attitude control motor plumes. In addition, the computational expense of each method will be studied in order to help determine the appropriate trade-off between fidelity and simulation turn around time.

CFD↗
DOE OSTI2019

Ultrafast X-Ray Absorption Spectroscopy of Strongly Correlated Systems: Core Hole Effect

Recently, ultrafast pump-probe spectroscopy has provided insightful information about the nonequilibrium dynamics of excitations in materials. In a typical experiment of time-resolved x-ray absorption spectroscopy, the systems are excited by a femtosecond laser pulse (pump pulse) followed by an x-ray probe pulse after a time delay to measure the absorption spectra of the photoexcited systems. We present a theory for nonequilibrium x-ray absorption spectroscopy in one-dimensional strongly correlated systems. The core hole created by the x ray is modeled as an additional effective potential of the core hole site, which changes the spectrum qualitatively. In equilibrium, the spectrum reveals the charge gap at half-filling and the metal-insulator transition in the presence of the core hole effect. Moreover, a pump-probe scheme is introduced to drive the system out of equilibrium before the x-ray probe. The effects of the pump pulse with varying frequencies, shapes, and fluences are discussed for the dynamics of strongly correlated systems in and out of resonance. The spectrum suggests that the driven insulating state has a metallic droplet around the core hole. The rich structures of the nonequilibrium x-ray absorption spectrum give more insight into the dynamics of electronic structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1978

An improved thermionic power conversion system for space propulsion

A concept of an out-of-core thermionic nuclear electric power conversion system for 400 Kwe power level is being investigated for space propulsion applications. Two key features distinguish the power system design from previous thermionic power conversion concepts. First, the thermionic converters are located outside a nuclear reactor with a neutron shield inserted to reduce the radiation level on the thermionic converter matrix. Second, multiple liquid-metal heat pipes are used exclusively for both thermal power transport (from the nuclear reactor to the thermionic converters) and waste heat removal (from the thermionic converters to the space radiator); no mechanical or electromagnetic pumps are involved. The system characteristics are are compared to those of the in-core thermionic reactor system concept. In many aspects, the system characteristics, including specific weight, lifetime, dynamics control and safety features are found to be more desirable than those of the in-core system concept.

Hsieh, T. M.↗
NASA NTRS2016

Space Launch System Booster Separation Aerodynamic Testing in the NASA Langley Unitary Plan Wind Tunnel

A wind-tunnel investigation of a 0.009 scale model of the Space Launch System (SLS) was conducted in the NASA Langley Unitary Plan Wind Tunnel to characterize the aerodynamics of the core and solid rocket boosters (SRBs) during booster separation. High-pressure air was used to simulate plumes from the booster separation motors (BSMs) located on the nose and aft skirt of the SRBs. Force and moment data were acquired on the core and SRBs. These data were used to corroborate computational fluid dynamics (CFD) calculations that were used in developing a booster separation database. The SRBs could be remotely positioned in the x-, y-, and z-direction relative to the core. Data were acquired continuously while the SRBs were moved in the axial direction. The primary parameters varied during the test were: core pitch angle; SRB pitch and yaw angles; SRB nose x-, y-, and z-position relative to the core; and BSM plenum pressure. The test was conducted at a free-stream Mach number of 4.25 and a unit Reynolds number of 1.5 million per foot.

Wilcox, Floyd J., Jr.↗
NASA NTRS2010

A Nonlinear Dynamic Inversion Predictor-Based Model Reference Adaptive Controller for a Generic Transport Model

Presented here is a Predictor-Based Model Reference Adaptive Control (PMRAC) architecture for a generic transport aircraft. At its core, this architecture features a three-axis, non-linear, dynamic-inversion controller. Command inputs for this baseline controller are provided by pilot roll-rate, pitch-rate, and sideslip commands. This paper will first thoroughly present the baseline controller followed by a description of the PMRAC adaptive augmentation to this control system. Results are presented via a full-scale, nonlinear simulation of NASA s Generic Transport Model (GTM).

Campbell, Stefan F.↗
DOE OSTI2021

A compute-bound formulation of Galerkin model reduction for linear time-invariant dynamical systems

This work aims to advance computational methods for projection-based reduced-order models (ROMs) of linear time-invariant (LTI) dynamical systems. For such systems, current practice relies on ROM formulations expressing the state as a rank-1 tensor (i.e., a vector), leading to computational kernels that are memory bandwidth bound and, therefore, ill-suited for scalable performance on modern architectures. This weakness can be particularly limiting when tackling many-query studies, where one needs to run a large number of simulations. This work introduces a reformulation, called rank-2 Galerkin, of the Galerkin ROM for LTI dynamical systems which converts the nature of the ROM problem from memory bandwidth to compute bound. We present the details of the formulation and its implementation, and demonstrate its utility through numerical experiments using, as a test case, the simulation of elastic seismic shear waves in an axisymmetric domain. We quantify and analyze performance and scaling results for varying numbers of threads and problem sizes. In conclusion, we present an end-to-end demonstration of using the rank-2 Galerkin ROM for a Monte Carlo sampling study. We show that the rank-2 Galerkin ROM is one order of magnitude more efficient than the rank-1 Galerkin ROM (the current practice) and about 970 times more efficient than the full-order model, while maintaining accuracy in both the mean and statistics of the field.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Mechanical property and microstructure evolution of nitrogen-modified Ti-6Al-4V alloy with core-shell structure by hot compression

Highlights: • Core-shell structured Ti-6Al-4 V is composed of α shells and α + β cores. • Nitrogen solution and core-shell structure significantly enhances the strength. • Core-shell structural alloy performs inhomogeneous deformation. - Abstract: Core-shell (CS) structured Ti-6Al-4 V (Ti64) alloy with single α shells and duplex α + β cores was fabricated by powder nitriding and spark plasma sintering. The mechanical property and microstructure evolution of CS-Ti64 alloy was investigated by compression at temperatures of 950–1100 °C and strain rates of 0.001–1 s{sup −1}. The nitrogen-induced solid solution strengthening and the nitrogen-stabilized CS structure significantly enhanced the compressive strength. Microstructure evolution of CS-Ti64, involved inhomogeneous deformation of the core and shell, which was quite different from that of the commercial Ti64. Regions adjacent to shells and central locations of cores suffered large strain and therefore preferentially underwent dynamic recrystallization (DRX). The deformation mechanism of the novel CS-Ti64 alloy was discussed in terms of the α shells, α laths and DRX.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Assembly of JAZ–JAZ and JAZ–NINJA complexes in jasmonate signaling

Jasmonates (JAs) are plant hormones with crucial roles in development and stress resilience. They activate MYC transcription factors by mediating the proteolysis of MYC inhibitors called JAZ proteins. In the absence of JA, JAZ proteins bind and inhibit MYC through the assembly of MYC–JAZ–Novel Interactor of JAZ (NINJA)–TPL repressor complexes. However, JAZ and NINJA are predicted to be largely intrinsically unstructured, which has precluded their experimental structure determination. Through a combination of biochemical, mutational, and biophysical analyses and AlphaFold-derived ColabFold modeling, we characterized JAZ–JAZ and JAZ–NINJA interactions and generated models with detailed, high-confidence domain interfaces. We demonstrate that JAZ, NINJA, and MYC interface domains are dynamic in isolation and become stabilized in a stepwise order upon complex assembly. By contrast, most JAZ and NINJA regions outside of the interfaces remain highly dynamic and cannot be modeled in a single conformation. Our data indicate that the small JAZ Zinc finger expressed in Inflorescence Meristem (ZIM) motif mediates JAZ–JAZ and JAZ–NINJA interactions through separate surfaces, and our data further suggest that NINJA modulates JAZ dimerization. This study advances our understanding of JA signaling by providing insights into the dynamics, interactions, and structure of the JAZ–NINJA core of the JA repressor complex.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Role of Superlattice Phonons in Charge Localization Across Quantum Dot Arrays

Understanding charge transport in semiconductor quantum dot (QD) assemblies is important for developing the next generation of solar cells and light-harvesting devices based on QD technology. One of the key factors that governs the transport in such systems is related to the hybridization between the QDs. Recent experiments have successfully synthesized QD molecules, arrays, and assemblies by directly fusing the QDs, with enhanced hybridization leading to high carrier mobilities and coherent band-like electronic transport. Here, in this work, we theoretically investigate the electron transfer dynamics across a finite CdSe-CdS core-shell QD array, considering up to seven interconnected QDs in one dimension. We find that, even in the absence of structural and size disorder, electron transfer can become localized by the emergent low-frequency superlattice vibrational modes when the connecting neck between QDs is narrow. On the other hand, we also identify a regime where the same vibrational modes facilitate coherent electron transport when the connecting necks are wide. Overall, we elucidate the crucial effects of electronic and superlattice symmetries and their couplings when designing high-mobility devices based on QD superlattices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Ultrafast electron transfer at organic semiconductor interfaces: Importance of molecular orientation

Much is known about the rate of photoexcited charge generation in at organic donor/acceptor (D/A) heterojunctions overaged over all relative arrangements. However, there has been very little experimental work investigating how the photoexcited electron transfer (ET) rate depends on the precise relative molecular orientation between D and A in thin solid films. This is the question that we address in this work. We find that the ET rate depends strongly on the relative molecular arrangement: The interface where the model donor compound copper phthalocyanine is oriented face-on with respect to the fullerene C 60 acceptor yields a rate that is approximately 4 times faster than that of the edge-on oriented interface. Our results suggest that the D/A electronic coupling is significantly enhanced in the face-on case, which agrees well with theoretical predictions, underscoring the importance of controlling the relative interfacial molecular orientation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

The Sensitivity of Joint Inversions of Seismic and Geodynamic Data to Mantle Viscosity

Seismic tomography has revealed the existence of large-scale velocity heterogeneities in the mantle. The interpretation of seismic velocity anomalies in terms of temperature and chemical composition is nonunique. We use geodynamic observations including gravity, plate motions, dynamic topography, and excess ellipticity of the core-mantle boundary combined with seismic observations to investigate the thermo-chemical structure of the mantle through joint inversions. An outstanding issue, however, is the physical connection between mantle density anomalies and the surface geodynamic observations, which requires knowledge of the mantle viscosity structure. Here we perform joint inversions assuming different viscosity profiles and examine the dependence of the results on the viscosity. We first assume that mantle heterogeneity is due to thermal variations, which places a constraint on the relation between seismic velocity and density, and we subsequently relax the constraint to allow for potential nonthermal effects. In all of our joint inversions, a nonthermal origin of density anomalies is required to explain the geodynamic data, though the amount varies with the assumed viscosity structure. A common observation is a high-density chemical signal in the center of the large low-shear-velocity provinces at the base of the mantle resulting in a near neutral or slightly dense overall buoyancy there. Using the derived density models and their corresponding viscosity profiles, we also calculate instantaneous mantle flow fields. The predicted flow fields derived from joint inversions are generally similar but are quite different from flow fields using density models derived from a posteriori scaling of pure seismic tomography models.

58 GEOSCIENCES↗
DOE OSTI2015

Observation of finite-wavelength screening in high-energy-density matter

A key component for the description of charged particle systems is the screening of the Coulomb interaction between charge carriers. First investigated in the 1920s by Debye and Hückel for electrolytes, charge screening is important for determining the structural and transport properties of matter as diverse as astrophysical and laboratory plasmas, nuclear matter such as quark-gluon plasmas, electrons in solids, planetary cores and charged macromolecules. For systems with negligible dynamics, screening is still mostly described using a Debye–Hückel-type approach. Here, we report the novel observation of a significant departure from the Debye–Hückel-type model in high-energy-density matter by probing laser-driven, shock-compressed plastic with high-energy X-rays. We use spectrally resolved X-ray scattering in a geometry that enables direct investigation of the screening cloud, and demonstrate that the observed elastic scattering amplitude is only well described within a more general approach.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Quasi 3D ECE imaging system for study of MHD instabilities in KSTAR

A second electron cyclotron emission imaging (ECEI) system has been installed on the KSTAR tokamak, toroidally separated by 1/16th of the torus from the first ECEI system. For the first time, the dynamical evolutions of MHD instabilities from the plasma core to the edge have been visualized in quasi-3D for a wide range of the KSTAR operation (B{sub 0} = 1.7∼3.5 T). This flexible diagnostic capability has been realized by substantial improvements in large-aperture quasi-optical microwave components including the development of broad-band polarization rotators for imaging of the fundamental ordinary ECE as well as the usual 2nd harmonic extraordinary ECE.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗