Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Testing for Random Limit Load Versus Static Limit Load

This document is an effort to report the basic test findings in an ongoing quest for understanding how random load factors should be applied to structural components in order to verify the strength of space flight hardware. A Spacelab experiment known as the Atmospheric Emission Photometric Imager (AEPI) was subjected to both an expected flight random environment and the associated Miles' equation equivalent static load. During each of these tests, the fiberglass pedestal was instrumented with 16 triaxial strain gauges around its base. Component strains and invariant stresses were compared. As seen previously in other hardware tests, the stress distribution from the random environment was an order of magnitude below the comparable static stresses. With a proposed data acquisition system, a strain database will be developed that will quantify an empirical relationship between dynamic and static limit stresses. This event will allow a more accurate estimate of launch environment effects on new technology structural components.

Lee, H. M.↗

Extragalactic Radio Jets and Intergalactic Medium 2

During the mid 1990s, the ROSAT satellite provided the highest resolution X-ray imaging, with useful X-ray spectroscopy, and excellent sensitivity. ROSAT"s PSPC and HRI instruments gave us our first high-quality data on the AGN phenomenon in nearby galaxies - the central theme of this research project. Initially this project concentrated on separating the AGN-related component of the X-ray emission from thermal radiation from the surrounding atmospheres in radio galaxies. There was ample reason to believe that this separation would be possible, although earlier work had taken the view that the X-ray emission from radio galaxies is either wholly AGN-related (and hence of sub-arcsec scale), or wholly from the galaxy and cluster atmospheres (and hence of scales - 10 arcsec or more in the low-redshift radio galaxies that we chose to study). First with the PSPC, and then with the HRI, we proved that a wide range of AGN core X ray emissivities could be found, and that the generic radio galaxy produces both AGN-related and atmosphere-related X-radiation. We demonstrated that there is a close relationship between the core X-ray power and the core radio power, and found instances in which the hot atmospheres of the galaxies must be participating in cooling flows, and other cases where those atmospheres are relatively stable. In some cases, there is a clear active relationship between the extended radio emission and the X-ray atmospheres: thus in NGC 326, we interpret the distorted radio structure as evidence of buoyancy as the radio plasma rises through the cluster atmosphere. In 3C 449, we can see that the radio plasma is displacing the X-ray emitting gas. In a further case (NGC 1265), we hoped that the motion of a radio galaxy through a cluster atmosphere would be apparent though the wake that it might establish - unfortunately, other structure in the atmosphere of the Perseus cluster tends to dominate our X-ray image, and no useful limits could be placed on the strength of the wake. In the light of so-called "unified" models of AGN, it is expected that the low-power radio galaxies studied under these programmes are the unbeamed counterparts of BL Lac objects. Accordingly, we predicted that BL Lac objects, as a class, should show X-ray halos from atmospheres similar to those associated with radio galaxies. The difficulty with studying this is that BL Lac objects tend to be X-ray bright, and the halos then vanish under the wings of the point response function. We found a BL Lac with less of a dynamic range problem, mapped it with the ROSAT HRI, and duly found an atmosphere (Hardcastle et al. 1999). Unfortunately for unification models, this atmosphere is exceptionally dense, so that it must be participating in an intense cooling flow. The implications of this for unification models are far from clear, and further work is under way.

Birkinshaw, Mark↗

Development of test methodology for dynamic mechanical analysis instrumentation

Dynamic mechanical analysis instrumentation was used for the development of specific test methodology in the determination of engineering parameters of selected materials, esp. plastics and elastomers, over a broad range of temperature with selected environment. The methodology for routine procedures was established with specific attention given to sample geometry, sample size, and mounting techniques. The basic software of the duPont 1090 thermal analyzer was used for data reduction which simplify the theoretical interpretation. Clamps were developed which allowed 'relative' damping during the cure cycle to be measured for the fiber-glass supported resin. The correlation of fracture energy 'toughness' (or impact strength) with the low temperature (glassy) relaxation responses for a 'rubber-modified' epoxy system was negative in result because the low-temperature dispersion mode (-80 C) of the modifier coincided with that of the epoxy matrix, making quantitative comparison unrealistic.

Allen, V. R.↗

An Experimental Investigation of Damaged Arresting Gear Tapes for the Langley Aircraft Landing Dynamics Facility

An experimental investigation was performed on damaged arresting gear tapes at the Langley Aircraft Landing Dynamics Facility. The arrestment system uses five pairs of tapes to bring the test carriage to a halt. The procedure used to determine when to replace the tapes consists of a close evaluation of each of the 10 tapes after each run. During this evaluation, each tape is examined thoroughly and any damage observed on the tape is recorded. If the damaged tape does not pass the inspection, the tape is replaced with a new one. For the past 13 years, the most commonly seen damage types are edge fray damage and transverse damage. Tests were conducted to determine the maximum tensile strength of a damaged arresting gear tape specimen. The data indicate that tapes exhibiting transverse damage can withstand higher loads than tapes with edge fray damage.

Mason, Angela J.↗

Twenty Years of NASA-EOS Multi-Sensor Satellite Observations at Kīlauea Volcano (2000–2019)

Recent eruptions of Kīlauea volcano, on the Island of Hawai'i, represent an ideal test location for studying volcanic plumes, due to its remote location and minimal anthropogenic pollution. Within this work we exploit the over 20-year data record from NASA EOS satellites to investigate the degree to which space-borne observations can detect shifts in known eruption dynamics at Kīlauea. Through the combined analysis of remotely sensed plume heights, plume particle microphysical properties, lava flow thermal tracking and high resolution SO2 mapping, we provide interpretations of the satellite signals in a volcanic context and link them to ground-based eruption reports for validation. We establish common patterns of plume dispersion and particle evolution and identify when significant shifts in activity occur. We also determine where ambient conditions influence the output retrieved from the space-borne sensors. By comparing the inferences derived from remote-sensing with the extensive record of suborbital observations at Kīlauea, we assess the strengths and limitations of the satellite-based volcanic assessment techniques. The work presented here highlights the capabilities of these techniques, allowing us to more confidently interpret volcanic activity observed from space globally, particularly in cases where ground observations are limited or entirely lacking.

volcano remote sensing↗

A three-dimensional viscous flow analysis for the helicopter tip vortex generation problem

The tip vortex flow field occurring in the vicinity of the tip region of a a helicopter rotor blade is a very complicated three-dimensional, viscous flow phenomenon. The details of the flow in the tip region can have a major effect in determining the generated rotor noise and can significantly affect the performance and dynamic loading of the rotor blade. The three-dimensional viscous subsonic tip vortex generation processes is investigated by a numerical procedure which allows spatial forward-marching integration, utilizing flow approximations from the velocity-decomposition approach of Briley and McDonald. The approach has been applied to compute the laminar and turbulent tip vortex flows for a constant thickness slab airfoil with a square tip, a constant thickness slab airfoil with a half round tip and a NACA 0012 airfoil with a half round tip. The basic mechanism of the tip vortex generation process as well as the prediction of vortex appearance, strength and secondary flow shown by the calculations are in qualitative agreement with experimental results.

Lin, S. J.↗

A three-dimensional viscous flow analysis for the helicopter tip vortex generation process about square and round tipped blades

The tip vortex flow field occurring in the vicinity of the tip region of a helicopter rotor blade is a very complicated three-dimensional, viscous flow phenomenon. The details of the flow in the tip region can have a major effect in determining the generated rotor noise and can significantly effect the performance and dynamic loading of the rotor blade. The three-dimensional viscous subsonic tip vortex generation processes is investigated by a numerical procedure which allows spatial forward-marching integration, utilizing flow approximations from the velocity-decomposition approach of Briley and McDonald. The approach has been applied to compute the laminar and turbulent tip vortex flows for a constant thickness slab airfoil with a square tip, a constant thickness slab airfoil with a half round tip and a NACA 0012 airfoil with a half round tip. The basic mechanism of the tip vortex generation process as well as the prediction of vortex appearance, strength and secondary flow shown by the calculations are in qualitative agreement with experimental results.

Lin, S.-J.↗

Lift distributions for a 3-dimensional steady blade-vortex interaction

The interaction of a horizontally mounted V23010-1.58 semispan airfoil (simulating a helicopter rotor blade) with a tip vortex shed by a vertically mounted upstream vortex-generating wing (VGW) is investigated experimentally at 60 m/s (dynamic pressure 2.2 kPa, Reynolds number 850,000, and Mach number 0.17) in the NASA Ames 7 x 10-ft wind tunnel. The velocity field near the blade is determined using a three-dimensional zoom LDV; the spanwise lift distribution is measured by strain gages; and the results are compared with the predictions of the panel computer code VSAERO (Maskew, 1982) in graphs. Features noted include localized loss of lift due to the presence of residual VGW wake, loss of lift far inboard on the blade (indicating the large domain of VGW vorticity), little change in total lift with variations in vortex strength, and good agreement between VSAERO and experiment in overall lift distribution but not in all geometric variations).

Dunagan, Stephen E.↗

Experimental Study of Tip Vortex Flow from a Periodically Pitched Airfoil Section

An experimental investigation of a tip vortex from a NACA0012 airfoil is conducted in a low-speed wind tunnel at a chord Reynolds number of 4x10(exp 4). Initially, data for a stationary airfoil held at various angles-of-attack (alpha) are gathered. Detailed surveys are done for two cases: alpha=10 deg with attached flow and alpha=25 deg with massive flow separation on the upper surface. Distributions of various properties are obtained using hot-wire anemometry. Data include mean velocity, streamwise vorticity and turbulent stresses at various streamwise locations. For all cases, the vortex core is seen to involve a mean velocity deficit. The deficit apparently traces to the airfoil wake, part of which gets wrapped by the tip vortex. At small alpha, the vortex is laminar within the measurement domain. The strength of the vortex increases with increasing alpha but undergoes a sudden drop around alpha (is) greater than 16 deg. The drop in peak vorticity level is accompanied by transition and a sharp rise in turbulence within the core. Data are also acquired with the airfoil pitched sinusoidally. All oscillation cases pertain to a mean alpha=15 deg while the amplitude and frequency are varied. An example of phase-averaged data for an amplitude of +/-10 deg and a reduced frequency of k=0.2 is discussed. All results are compared with available data from the literature shedding further light on the complex dynamics of the tip vortex.

vortex flows↗

Effects of Increasing the Category Resolution of the Sea Ice Thickness Distribution in a Coupled Climate Model on Arctic and Antarctic Sea Ice Mean State

Many modern sea ice models used in global climate models represent the subgrid-scale heterogeneity in sea ice thickness with an ice thickness distribution (ITD), which improves model realism by representing the significant impact of the high spatial heterogeneity of sea ice thickness on thermodynamic and dynamic processes. Most models default to five thickness categories. However, little has been done to explore the effects of the resolution of this distribution (number of categories) on sea-ice feedbacks in a coupled model framework and resulting representation of the sea ice mean state. Here, we explore this using sensitivity experiments in CESM2 with the standard 5 ice thickness categories and 15 ice thickness categories. Increasing the resolution of the ITD in a run with preindustrial climate forcing results in substantially thicker Arctic sea ice year-round. Analyses show that this is a result of the ITD influence on ice strength. With 15 ITD categories, weaker ice occurs for the same average thickness, resulting in a higher fraction of ridged sea ice. In contrast, the higher resolution of thin ice categories results in enhanced heat conduction and bottom growth and leads to only somewhat increased winter Antarctic sea ice volume. The spatial resolution of the ICESat-2 satellite mission provides a new opportunity to compare model outputs with observations of seasonal evolution of the ITD in the Arctic (ICESat-2; 2018–2021). Comparisons highlight significant differences from the ITD modeled with both runs over this period, likely pointing to underlying issues contributing to the representation of average thickness.

Madison M. Smith↗

The dynamic quiet solar corona: 4 days of joint observing with MDI and EIT

The analysis of a sequence of joint extreme ultraviolet imaging telescope (EIT) Fe XII and Michelson Doppler imager (MDI) magnetogram observations of the quiet sun near disk center is presented. It was found that: all the emerging flux above the threshold of approximately 10(sup 17) Mx is associated with enhanced coronal emissions; loop systems between the polarities in ephemeral regions remain visible up to separations of 10000 up to 30000 km; brightenings between approaching opposite polarity network concentrations form when the concentrations are between 5000 and 25000 km apart, and that faint connections up to 40000 km in length form as sets of concentrations of the same polarity coagulate. The coronal emission over patches of the quiet sun depends on the total flux in connected concentrations, on their distance and on the positions and strengths of neighboring concentrations.

Schrijver, C. J.↗

Engineering and fabrication cost considerations for cryogenic wind tunnel models

Design and fabrication cost drivers for cryogenic transonic wind tunnel models are defined. The major cost factors for wind tunnel models are model complexity, tolerances, surface finishes, materials, material validation, and model inspection. The cryogenic temperatures require the use of materials with relatively high fracture toughness but at the same time high strength. Some of these materials are very difficult to machine, requiring extensive machine hours which can add significantly to the manufacturing costs. Some additional engineering costs are incurred to certify the materials through mechanical tests and nondestructive evaluation techniques, which are not normally required with conventional models. When instrumentation such as accelerometers and electronically scanned pressure modules is required, temperature control of these devices needs to be incorporated into the design, which requires added effort. Additional thermal analyses and subsystem tests may be necessary, which also adds to the design costs. The largest driver to the design costs is potentially the additional static and dynamic analyses required to insure structural integrity of the model and support system.

Boykin, R. M., Jr.↗

Requirements for effective use of CFD in aerospace design

This paper presents a perspective on the requirements that Computational Fluid Dynamics (CFD) technology must meet for its effective use in aerospace design. General observations are made on current aerospace design practices and deficiencies are noted that must be rectified for the U.S. aerospace industry to maintain its leadership position in the global marketplace. In order to rectify deficiencies, industry is transitioning to an integrated product and process development (IPPD) environment and design processes are undergoing radical changes. The role of CFD in producing data that design teams need to support flight vehicle development is briefly discussed. An overview of the current state of the art in CFD is given to provide an assessment of strengths and weaknesses of the variety of methods currently available, or under development, to produce aerodynamic data. Effectiveness requirements are examined from a customer/supplier view point with design team as customer and CFD practitioner as supplier. Partnership between the design team and CFD team is identified as an essential requirement for effective use of CFD. Rapid turnaround, reliable accuracy, and affordability are offered as three key requirements that CFD community must address if CFD is to play its rightful role in supporting the IPPD design environment needed to produce high quality yet affordable designs.

Raj, Pradeep↗

Design of a pressurized lunar rover

A pressurized lunar rover is necessary for future long-term habitation of the moon. The rover must be able to safely perform many tasks, ranging from transportation and reconnaissance to exploration and rescue missions. Numerous designs were considered in an effort to maintain a low overall mass and good mobility characteristics. The configuration adopted consists of two cylindrical pressure hulls passively connected by a pressurized flexible passageway. The vehicle has an overall length of 11 meters and a total mass of seven metric tons. The rover is driven by eight independently powered two meter diameter wheels. The dual-cylinder concept allows a combination of articulated frame and double Ackermann steering for executing turns. In an emergency, the individual drive motors allow the option of skid steering as well. Two wheels are connected to either side of each cylinder through a pinned bar which allows constant ground contact. Together, these systems allow the rover to easily meet its mobility requirements. A dynamic isotope power system (DIPS), in conjunction with a closed Brayton cycle, supplied the rover with a continuous supply of 8.5 kW. The occupants are all protected from the DIPS system's radiation by a shield of tantalum. The large amount of heat produced by the DIPS and other rover systems is rejected by thermal radiators. The thermal radiators and solar collectors are located on the top of the rear cylinder. The solar collectors are used to recharge batteries for peak power periods. The rover's shell is made of graphite-epoxy coated with multi-layer insulation (MLI). The graphite-epoxy provides strength while the thermally resistant MLI gives protection from the lunar environment. An elastomer separates the two materials to compensate for the thermal mismatch. The communications system allows for communication with the lunar base with an option for direct communication with earth via a lunar satellite link. The various links are combined into one signal broadcast in the S-band at 2.3 GHz. The rover is fitted with a parabolic reflector disk for S-band transmission, and an omnidirectional antenna for local extravehicular activity (EVA) communication. The rover's guidance, navigation, and control subsystem consists of an inertial guidance system, an orbiting lunar satellite, and an obstacle avoidance system. In addition, the rover is equipped with a number of external fixtures including two telerobotic arms, lights, cameras, EVA storage, manlocks, a docking fixture, solar panels, thermal radiators, and a scientific airlock. In conclusion, this rover meets all of the design requirements and clearly surpasses them in the areas of mobility and maneuverability.

Bhardwaj, Manoj↗

ISS Destiny Laboratory Smoke Detection Model

Smoke transport and detection were modeled numerically in the ISS Destiny module using the NIST, Fire Dynamics Simulator code. The airflows in Destiny were modeled using the existing flow conditions and the module geometry included obstructions that simulate the currently installed hardware on orbit. The smoke source was modeled as a 0.152 by 0.152 m region that emitted smoke particulate ranging from 1.46 to 8.47 mg/s. In the module domain, the smoke source was placed in the center of each Destiny rack location and the model was run to determine the time required for the two smoke detectors to alarm. Overall the detection times were dominated by the circumferential flow, the axial flow from the intermodule ventilation and the smoke source strength.

Brooker, John E.↗

Trailing Vortex Measurements in the Wake of a Hovering Rotor Blade with Various Tip Shapes

This work examined the wake aerodynamics of a single helicopter rotor blade with several tip shapes operating on a hover test stand. Velocity field measurements were conducted using three-component laser Doppler velocimetry (LDV). The objective of these measurements was to document the vortex velocity profiles and then extract the core properties, such as the core radius, peak swirl velocity, and axial velocity. The measured test cases covered a wide range of wake-ages and several tip shapes, including rectangular, tapered, swept, and a subwing tip. One of the primary differences shown by the change in tip shape was the wake geometry. The effect of blade taper reduced the initial peak swirl velocity by a significant fraction. It appears that this is accomplished by decreasing the vortex strength for a given blade loading. The subwing measurements showed that the interaction and merging of the subwing and primary vortices created a less coherent vortical structure. A source of vortex core instability is shown to be the ratio of the peak swirl velocity to the axial velocity deficit. The results show that if there is a turbulence producing region of the vortex structure, it will be outside of the core boundary. The LDV measurements were supported by laser light-sheet flow visualization. The results provide several benchmark test cases for future validation of theoretical vortex models, numerical free-wake models, and computational fluid dynamics results.

Martin, Preston B.↗

Tracking and Data Relay Satellite (TDRS) Orbit Estimation Using an Extended Kalman Filter

Alternatives to the Tracking and Data Relay Satellite (TDRS) orbit estimation procedure were studied to develop a technique that both produces more reliable results and is more amenable to automation than the prior procedure. The Earth Observing System (EOS) Terra mission has TDRS ephemeris prediction 3(sigma) requirements of 75 meters in position and 5.5 millimeters per second in velocity over a 1.5-day prediction span. Meeting these requirements sometimes required reruns of the prior orbit determination (OD) process, with manual editing of tracking data to get an acceptable solution. After a study of the available alternatives, the Flight Dynamics Facility (FDF) began using the Real-Time Orbit Determination (RTOD(Registered TradeMark)) Kalman filter program for operational support of TDRSs in February 2007. This extended Kalman filter (EKF) is used for daily support, including within hours after most thrusting, to estimate the spacecraft position, velocity, and solar radiation coefficient of reflectivity (C(sub R)). The tracking data used are from the Bilateration Ranging Transponder System (BRTS), selected TDRS System (TDRSS) User satellite tracking data, and Telemetry, Tracking, and Command (TT&C) data. Degraded filter results right after maneuvers and some momentum unloads provided incentive for a hybrid OD technique. The results of combining EKF strengths with the Goddard Trajectory Determination System (GTDS) Differential Correction (DC) program batch-least-squares solutions, as recommended in a 2005 paper on the chain-bias technique, are also presented.

Ward, Douglas T.↗

The Importance of Earth as a Meteor Detector

In order to understand the complex meteoroid environment that threatens spacecraft in near Earth space, ground based observational techniques provide us with an effective option for evaluating the important parameters of flux, speed, mass, density and directionality. While no observational method (in ]situ or ground based detectors) provides bias free measurements of direct quantities, there are several benefits to using the Earth as a detector for calibrating meteoroid models that extend to the inner Solar System and beyond Earth fs orbit. The Earth constantly interacts with meteoritic particles from comets and asteroids as they evolve from their parent objects through dynamical processes. Modeling these dynamical processes with a physics ]based approach can help reveal the causes of observational features but developing those models involves constraining sequences of poorly defined parameters. These parameters must be tuned to a particular detector that offers direct or indirect measurements of mass, density, flux and speed - the quantities used in evaluating penetration risk. The following topics will be discussed: a) Consistency between ground based and in.situ measurements of flux in Earth orbit. b) Consistency between radar and electro.optical speed determinations and agreement of these with dynamical studies. c) The fact that there are six sporadic sources which cannot be determined by integrated line of sight emissivity: Observations using IRAS or COBE cannot give you all important directionality needed for risk evaluations. d) The large collecting area of the Earth s atmosphere compared to in.situ detectors gives better number statistics in the threat regime. The NASA Meteoroid Environment Office utilizes ground based radar and electro.optical measurements to calibrate the Meteoroid Engineering Model (MEM). As MEM is an engineering design model our main emphasis is on threat size particle, speed, flux and directionality. However, MEM has acknowledged limitations particularly with regard to source strength as a function of mass and work is proceeding with improved distributions that will rectify many of these shortcomings.

Koehler, Heather↗