Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dioxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Monolith catalysts for closed-cycle carbon dioxide lasers

The objective was to explore ways of making a monolithic form of catalyst for CO2 lasers. The approach chosen was to pelletize the catalyst material, Au/MnO2 powder, and epoxy the pellets to stainless steel sheets as structural supports. The CO oxidation reaction over Au/MnO2 powder was found to be first overall, and the reaction rate constant at room temperature was 4.4 +/- 0.3 cc/(g x sec). The activation energy was 5.7 kcal/mol. The BET surface area of the pellets was found to vary from 125 to 140 sq m/g between different batches of catalyst. Pellets epoxied to stainless steel strips showed no sign of fracture or dusting when subjected to thermal tests. Pellets can be dropped onto hard surfaces with chipping of edges but no breakage of the pellets. Mechanical strength tests performed on the pellets showed that the crush strength is roughly one-fourth of the pelletizing force. The apparent activity and activation energy over the pellets were found to be less than over the powdered form of the catalyst. The lower apparent activity and activation energy of the pellets are due to the fact that the internal surface area of a pellet is not exposed to the reactant concentration present in the flowing gas as a result of intrapellet diffusion resistance. Effectiveness factors varied from 0.44, for pellets having thickness of 2 mm and attached with epoxy to a stainless steel strip. The epoxy and the stainless steel strip were found to simply block off one of the circular faces of the pellets. The epoxy did not penetrate the pellets and block the active sites. The values of the effective diffusivities were estimated to be between 2.3 x 10(exp -3) and 4.9 x 10(exp -3) sq cm/s. With measurements performed on one powder sample and one pellet configuration, reasonable accurate predictions can be made of conversions that would be obtained with other pellet thickness and configurations.

Herz, Richard K.↗

Effects of elevated atmospheric carbon dioxide concentrations on water and acid requirements of soybeans grown in a recirculating hydroponic system

Establishing mass budgets of various crop needs, i.e. water and nutrients, in different environments is essential for the Controlled Ecological Life Support System (CELSS). The effects of CO2 (500 and 1000 umol mol (exp -1)) on water and acid use (for pH control) by soybeans in a recirculating hydroponic system were examined. Plants of cvs. McCall and Pixie were grown for 90 days using the nutrient film technique (NFT) and a nitrate based nutrient solution. System acid use for both CO2 levels peaked near 4 weeks during a phase of rapid vegetative growth, but acid use decreased more rapidly under 500 compared to 1000 umol mol (exp GR) CO2. Total system water use by 500 and 1000 umol mol (exp -1) plants was similar, leaving off at 5 weeks and declining as plants senesced (ca. 9 weeks). However, single leaf transpiration rates were consistently lower at 1000 umol mol (exp -1). The data suggest that high CO2 concentrations increase system acid (and nutrient) use because of increased vegetative growth, which in turn negates the benefit of reduced water use (lower transpiration rates) per unit leaf area.

Mackowiak, C. L.↗

Isotopic exchange between carbon dioxide and ozone via O(1D) in the stratosphere

A novel mechanism for isotropic exchange between CO2 and O3 via O(1D) + CO2 - CO3(asterisk) followed by CO3(asterisk) - CO2 + O(3P). A one-dimensional model calculation shows that this mechanism can account for the enrichment in O-18 in the stratospheric CO2 observed by Gamo et al. (1989), using the heavy O3 profile observed by Mauersberger (1981). The implications of this mechanism for other stratospheric species and as a source of isotopically heavy CO2 in the troposphere are briefly discussed.

Yung, Yuk L.↗

A study of the radiative effects of the 9.4- and 10.4-micron bands of carbon dioxide

The potential radiative impact of the relatively weak 9.4- and 10.4-micron bands of CO2 is investigated. A comparison of line-by-line calculations to laboratory data demonstrates that the line-by-line procedure and laboratory data typically yield comparable results; however, there are cases of substantial disagreement between the line-by-line results and the laboratory data. It is observed that the Goody narrow-band model yields band absorptances in good agreement with the reference line-by-line calculations. For application to climate models, new broadband parameterizations, are presented for the 9.4- and 10.4-micron bands of CO2. Clear-sky flux calculations demonstrate that for projected increases of CO2 the impact of the 9.4- and 10.4-micron bands is comparable to that attributed to projected increases of tropospheric ozone.

Kratz, D. P.↗

Analysis of minerals containing dissolved traces of the fluid phase components water and carbon dioxide

Substantial progress has been made towards a better understanding of the dissolution of common gas/fluid phase components, notably H2O and CO2, in minerals. It has been shown that the dissolution mechanisms are significantly more complex than currently believed. By judiciously combining various solid state analytical techniques, convincing evidence was obtained that traces of dissolved gas/fluid phase components undergo, at least in part, a redox conversion by which they split into reduced H2 and and reduced C on one hand and oxidized oxygen, O(-), on the other. Analysis for 2 and C as well as for any organic molecules which may form during the process of co-segregation are still impeded by the omnipresent danger of extraneous contamination. However, the presence of O(-), an unusual oxidized form of oxygen, has been proven beyond a reasonable doubt. The presence of O(-) testifies to the fact that a redox reaction must have taken place in the solid state involving the dissolved traces of gas/fluid phase components. Detailed information on the techniques used and the results obtained are given.

Freund, Friedemann↗

Automated carbon dioxide cleaning system

Solidified CO2 pellets are an effective blast media for the cleaning of a variety of materials. CO2 is obtained from the waste gas streams generated from other manufacturing processes and therefore does not contribute to the greenhouse effect, depletion of the ozone layer, or the environmental burden of hazardous waste disposal. The system is capable of removing as much as 90 percent of the contamination from a surface in one pass or to a high cleanliness level after multiple passes. Although the system is packaged and designed for manual hand held cleaning processes, the nozzle can easily be attached to the end effector of a robot for automated cleaning of predefined and known geometries. Specific tailoring of cleaning parameters are required to optimize the process for each individual geometry. Using optimum cleaning parameters the CO2 systems were shown to be capable of cleaning to molecular levels below 0.7 mg/sq ft. The systems were effective for removing a variety of contaminants such as lubricating oils, cutting oils, grease, alcohol residue, biological films, and silicone. The system was effective on steel, aluminum, and carbon phenolic substrates.

Hoppe, David T.↗

Infrared Pulse-laser Long-path Absorption Measurement of Carbon Dioxide Using a Raman-shifted Dye Laser

A pulsed laser source is effective in infrared laser long-path absorption measurements when the optical path length is very long or the reflection from a hard target is utilized, because higher signal-to-noise ratio is obtained in the detection of weak return signals. We have investigated the performance of a pulse-laser long-path absorption system using a hydrogen Raman shifter and a tunable dye laser pumped by a Nd:YAG laser, which generates second Stokes radiation in the 2-micron region.

Minato, Atsushi↗

Formation and decay of (3P(J))O atoms in the laser flash photolysis of chlorine dioxide (OClO) at 308 nm

The quantum yields of O(3P(J)) and Cl(2P(3/2)) atoms released in the laser flash photolysis of OClO at 308 and 298 K were determined and the kinetics of the subsequent oxygen atom decay was investigated using time-resolved atomic resonance fluorescence measurements. The results are consistent with the formation of sym-ClO3 having a Delta Hf(ClO3) (formed in the reaction O + OClO + Ar) of 55.6 +/-4 kcal/mol.

Colussi, A. J.↗

Sulfur dioxide and its variations

UV spectroscopy from the Pioneer Venus Orbiter shows a decline in the cloud top abundance of SO2 from about 100 ppb to about 10 ppb in the period 1978-1986. A consistent decline in polar haze has occurred over the same period with the correlation coefficient between these two observables of 0.8. Star calibrations determine the instrument sensitivity to within 10 percent, which rules out the possibility that this is an instrumental effect. Systematic errors could increase the SO2 abundance to twice the inferred values in later orbits. Tracking of SO2 features and power spectral analysis give rotation periods for the longer lived features of 3.6-5.2 d, consistent with cloud tracked winds observed at other wavelengths. The behavior of SO2 and polar haze can be plausibly explained by episodic injection of SO2 into the cloud top regions, for example, by active volcanism.

Esposito, Larry W.↗

Comparison of metal oxide absorbents for regenerative carbon dioxide and water vapor removal for advanced portable life support systems

Metal-oxide absorbents (MOAs) have a demonstrated capability for removal of both metabolic CO2 and H2O from breathing atmospheres, simplifying portable life support system (PLSS) design and affording reversible operation for regeneration. Attention is presently given to the comparative performance levels obtained by silver-oxide-based and silver/zinc-oxide-based systems, which also proved to be longer-lasting than the silver oxide-absorber system. The silver/zinc system is found to substantially simplify the ventilation loop of a prospective Space Station Freedom PLSS.

Stonesifer, Greg T.↗

Carbon dioxide budget in a temperature grassland ecosystem

Eddy correlation measurements of CO2 flux made during May-October 1987 and June-August 1989 were employed, in conjunction with simulated data, to examine the net exchange of CO2 in a temperature grassland ecosystem. Simulated estimates of CO2 uptake were used when flux measurements were not available. These estimates were based on daily intercepted photosynthetically active radiation, air temperature, and extractable soil water. Soil CO2 flux and dark respiration of the aerial part of plants were estimated using the relationships developed by Norman et al. (1992) and Polley et al. (1992) at the study site. The results indicate that the CO2 exchange between this ecosystem and the atmosphere is highly variable. The net ecosystem CO2 exchange reached its peak value (12-18 g/sq m d) during the period when the leaf area index was maximum. Drought, a frequent occurrence in this region, can change this ecosystem from a sink to a source for atmospheric CO2. Comparison with data on dry matter indicated that the aboveground biomass accounted for about 45-70 percent of the net carbon uptake, suggesting the importance of the below ground biomass in estimating net primary productivity in this ecosystem.

Kim, Joon↗

Carbon dioxide effects on potato growth under different photoperiods and irradiance

The effects of atmospheric CO2 concentration, photosynthetic photon flux (PPF), and the length of the photoperiod on the tuber yield were investigated for three potato cultivars (Norland, Russet Burbank, and Denali), by growing these cultivars for 90 days in atmospheres containing 350 or 1000 micromol/mol CO2, at photoperiods of 12- or 24-hr, and at PPFs of 400 or 800 micromol/sq m per sec. Air temperatures and relative humidity were kept at 16 C and 70 percent, respectively. It was found that the tuber yield of Denali potatoes showed the greatest increase (21 percent) in response to increased CO2 across all irradiance treatments, while the tuber yields of Russet and Norland were increased 18 and 9 percent, respectively. Greater plant growth from CO2 enrichment was observed under lower PPF and the shorter (12 hr) photoperiod.

Wheeler, Raymond M.↗

Laboratory measurements of the microwave and millimeter-wave opacity of gaseous sulfur dioxide (SO2) under simulated conditions for the Venus atmosphere

Laboratory measurements have been conducted of the opacity of gaseous SO2 in a CO2 atmosphere at 12.3 cm, 1.32 cm, and 0.32 cm, with a view to the effects of this gas on the mm-wave emission of the Venus atmosphere. Close agreement is noted between the results obtained and the absorptivity predicted from a Van Vleck-Weisskopf formalism at the two shortest wavelengths, but not at the longest. These results have been incorporated into a radiative transfer model in order to infer an abundance profile for gaseous SO2 in Venus' middle atmosphere, and are also used to ascertain the effects of a SO2/CO2 gaseous mixture on the mm-wavelength spectrum of Venus.

Fahd, Antoine K.↗

In-situ carbon dioxide fixation on Mars

The authors examine several novel proposals for CO2 fixation through chemical, photochemical, and photoelectrochemical means. For example, the reduction of CO2 to hydrocarbons such as acetylene (C2H2) can be accomplished with hydrogen. Acetylene has a theoretical vacuum specific impulse of about 375 s. The authors also examine potential uses of CO, as obtained or further reduced to carbon, as a reducing agent in metal oxide processing to form metals or metal carbides for use as structural or power materials. The CO2 can be recycled to generate O2 and CO. In this study, the authors examine reaction schemes for processing in situ resources. The authors highlight chemistry with hydrogen and carbon monoxide to produce propellants and other necessities of manned exploration.

Hepp, Aloysius F.↗

Momentum, water vapor, and carbon dioxide exchange at a centrally located prairie site during FIFE

Eddy correlation measurements were taken of momentum, water vapor, sensible heat, and CO2 at a centrally located plateau site in the FIFE study area from May to October 1987. Approximately 82 percent of the vegetation at the site was composed of several C4 grass species, with the remainder being C3 grasses, forbs, wedges, and woody plants. Precipitation was about normal during the study period, except for a three week dry period in late July to early August that caused moisture stress conditions.

Verma, Shashi B.↗

The seasonal cycle of carbon dioxide on Mars

Results of Viking investigations relevant to the CO2 cycle on Mars are presented, and the extensive modeling efforts directed towards understanding this cycle and its couplings to the seasonal cycles of water and dust are reviewed. It is found that winter condensation is suppressed either because the solid CO2 deposits are inefficient radiators or because of the scattering effects of CO2 clouds. With regard to the qualitative difference between the spring regression curves and between the wind systems for the two seasonal caps, it is suggested that the greater amount of aerosols in the atmosphere during northern winter results in a greater proportion of atmospheric condensation there than in the south. The seasonal pressure curves obtained by the Viking Landers during four Martian years are remarkably similar. It is suggested that the CO2 cycle is not sensitive to atmospheric dust and the meteorological variations accompanying global storms or that some subtle cancellation between different mechanisms suppresses variations.

James, Philip B.↗

Magnesium and Carbon Dioxide - A Rocket Propellant for Mars Missions

A rocket engine for Mars missions is proposed that could utilize CO2 accumulated from the Martian atmosphere as an oxidizer. For use as possible fuel, various metals, their hydrides, and mixtures with hydrogen compounds are considered. Thermodynamic calculations show that beryllium fuels ensure the most impulse but poor inflammability of Be and high toxicity of its compounds put obstacles to their applications. Analysis of the engine performance for other metals together with the parameters of ignition and combustion show that magnesium seems to be the most promising fuel. Ballistic estimates imply that a hopper with the chemical rocket engine on Mg + CO2 propellant could be readily developed. This vehicle would be able to carry out 2-3 ballistic flights on Mars before the final ascent to orbit.

Shafirovich, E. IA.↗

Portable life support system regenerative carbon dioxide and water vapor removal by metal oxide absorbents preprototype hardware development and testing

NASA-Johnson has acquired a preprototype/full-scale metal oxide CO2 and humidity remover (MOCHR), together with its regeneration module. Tests conducted prior to delivery by the MOCHR's manufacturer have demonstrated the concurrent removal of H2O and CO2 at rates, and under conditions, that are applicable to EVA Portable Life Support Systems.

Hart, Joan M.↗