Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffusion models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Tools for Assessing Performance Project: FY2021 Quarter 4 Report

The rotatable building located at Texas Tech’s Reese Technology Center is approximately 14 m wide (width being defined as more normal to the wind than parallel), 9 m long (aligned more with the wind than perpendicular), and 4 m tall. By placing 29 sonic anemometers downwind of the building, see Fig. 1, this facility provided a chance to collect data concerning both the wake velocity deficit distribution in the downstream and crosssteam directions (relative to the mean wind) behind an isolated building. A preliminary comparison between this data and the recently- developed fast-running diffusive wake model, which was developed based on wind tunnel and LES (performed with JOULES) simulations, for the purpose of either validating this model of understanding potential persistent differences between the idealized wind tunnel or LES conditions and those of full-scale real world phenomena. For this preliminary exploration, we utilized the diffusive wake model implemented in the QUIC model.

42 ENGINEERING↗

Tritium Transport Modeling at the Pore Scale in Ceramic Breeder Materials Using TMAP8

Fusion reactors depend on the blanket material to breed and release tritium at the same rate or faster than it is consumed by the fusion reaction. Cellular ceramic breeders (CCBs) are dense materials that can maintain a high tritium breeding ratio while promoting tritium release because of highly connected pores. Assessing the tritium breeding capabilities of these materials requires a combination of extensive experimental and modeling efforts. In this work, we develop and calibrate a multiphysics model of tritium transport. This novel model accounts for ceramic and pore diffusion, trapping and detrapping, and several surface reactions at the pore surface. We perform a sensitivity analysis and calibrate the model by comparing its predictions against experimental measurements of deuterium absorption. The calibrated model is then used to model tritium absorption in samples with different pore microstructures to investigate the effect of pore interconnectivity on tritium absorption. The model is part of the development of the multiscale, multiphysics framework for tritium transport [i.e., the Tritium Migration Analysis Program (TMAP8)], which is itself built on top of the finite-element multiphysics framework multiphysics object-oriented simulation environment (MOOSE). This study demonstrates some of TMAP8’s capabilities and is the first step toward assessing the tritium breeding capabilities of ceramic breeder material designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An Advanced Integrated Diffusion/Transport Method for the Design, Analysis and Optimization of the Very-High-Temperature Reactors

The main objective of this research is to develop an integrated diffusion/transport (IDT) method to substantially improve the accuracy of nodal diffusion methods for the design and analysis of Very High Temperature Reactors (VHTR). Because of the presence of control rods in the reflector regions in the Pebble Bed Reactor (PBR-VHTR), traditional nodal diffusion methods do not accurately model these regions, within which diffusion theory breaks down in the vicinity of high neutron absorption and steep flux gradients. The IDT method uses a local transport solver based on a new incident flux response expansion method in the controlled nodes. Diffusion theory is used in the rest of the core. This approach improves the accuracy of the core solution by generating transport solutions of controlled nodes while maintaining computational efficiency by using diffusion solutions in nodes where such a treatment is sufficient. The transport method is initially developed and coupled to the reformulated 3-D nodal diffusion model in the CYNOD code for PBR core design and fuel cycle analysis. This method is also extended to the prismatic VHTR. The new method accurately captures transport effects in highly heterogeneous regions with steep flux gradients. The calculations of these nodes with transport theory avoid errors associated with spatial homogenization commonly used in diffusion methods in reactor core simulators

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Testing a dynamical equilibrium model of the extraplanar diffuse ionized gas in NGC 891

The observed scale heights of extraplanar diffuse ionized gas (eDIG) layers exceed their thermal scale heights by a factor of a few in the Milky Way and other nearby edge-on disk galaxies. Here, we test a dynamical equilibrium model of the eDIG layer in NGC 891, where we ask whether the thermal, turbulent, magnetic field, and cosmic-ray pressure gradients are sufficient to support the layer. In optical emission-line spectroscopy from the SparsePak integral field unit on the WIYN 3.5 m telescope, the Hα emission in position–velocity space suggests that the eDIG is found in a ring between galactocentric radii of R{sub min}⩽R⩽8 kpc, where R{sub min}⩾2 kpc. We find that the thermal (σ{sub th}=11 km s{sup −1}) and turbulent (σ{sub turb}=25 km s{sup −1}) velocity dispersions are insufficient to satisfy the hydrostatic equilibrium equation given an exponential electron scale height of h{sub z}=1.0 kpc. Using a literature analysis of radio continuum observations from the CHANG-ES survey, we demonstrate that the magnetic field and cosmic-ray pressure gradients are sufficient to stably support the gas at R⩾8 kpc if the cosmic rays are sufficiently coupled to the system (γ{sub cr}=1.45). Thus, a stable dynamical equilibrium model is viable only if the eDIG is found in a thin ring around R = 8 kpc, and nonequilibrium models such as a galactic fountain flow are of interest for further study.

79 ASTRONOMY AND ASTROPHYSICS↗

Decaying dark matter in light of the PAMELA and Fermi LAT data

A series of experiments measuring high-energy cosmic rays have recently reported strong indications for the existence of an excess of high-energy electrons and positrons. If interpreted in terms of the decay of dark matter particles, the PAMELA measurements of the positron fraction and the Fermi LAT measurements of the total electron-plus-positron flux restrict the possible decaying dark matter scenarios to a few cases. Analyzing different decay channels in a model-independent manner, and adopting a conventional diffusive reacceleration model for the background fluxes of electrons and positrons, we identify some promising scenarios of dark matter decay and calculate the predictions for the diffuse extragalactic gamma-ray flux, including the contributions from inverse Compton scattering with the interstellar radiation field.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of multi-electron, multi-step homogeneous catalysis by rotating disc electrode voltammetry: theory, application, and obstacles

Rotating disc electrode (RDE) voltammetry has been widely adopted for the study of heterogenized molecular electrocatalysts for multi-step fuel-forming reactions but this tool has never been comprehensively applied to their homogeneous analogues. Here, the utility and limitations of RDE techniques for mechanistic and kinetic analysis of homogeneous molecular catalysts that mediate multi-electron, multi-substrate redox transformations are explored. Using the ECEC' reaction mechanism as a case study, two theoretical models are derived based on the Nernst diffusion layer model and the Hale transformation. Current–potential curves generated by these computational strategies are compared under a variety of limiting conditions to identify conditions under which the more minimalist Nernst Diffusion Layer approach can be applied. Based on this theoretical treatment, strategies for extracting kinetic information from the plateau current and the foot of the catalytic wave are derived. RDEV is applied to a cobaloxime hydrogen evolution reaction (HER) catalyst under non-aqueous conditions in order to experimentally validate this theoretical framework and explore the feasibility of RDE as a tool for studying homogeneous catalysts. Importantly, analysis of the foot-of-the-wave via this theoretical framework provides rate constants for elementary reaction steps that agree with those extracted from stationary voltammetric methods, supporting the application of RDE to study homogeneous fuel-forming catalysts. Lastly, obstacles encountered during the kinetic analysis of cobaloxime, along with the voltammetric signatures used to diagnose this reactivity, are discussed with the goal of guiding groups working to improve RDE set-ups and help researchers avoid misinterpretation of RDE data.

08 HYDROGEN↗

Adaptive Interface-PINNs (AdaI-PINNs) for transient diffusion: Applications to forward and inverse problems in heterogeneous media

We model transient diffusion in heterogeneous materials using a novel physics-informed neural networks framework (PINNs) termed Adaptive interface physics-informed neural networks or AdaI-PINNs (Roy et al. arXiv preprint arXiv:2406.04626, 2024). AdaI-PINNs utilize different activation functions with trainable slopes tailored to each material region within the computational domain, allowing for a fully automated and adaptive PINNs approach to model interface problems with strongly and weakly discontinuous solutions. To enhance its performance in highly heterogeneous transient diffusion systems, we prescribe a suite of robust practices, including appropriate non-dimensionalization of equations, a biased sampling method, Glorot initialization, and the hard enforcement of boundary and initial conditions. Here we evaluate the efficacy of the proposed method on several benchmark forward and inverse problems. Comparative studies on one-dimensional and two-dimensional benchmark problems reveal that the modified AdaI-PINNs outperform its unmodified counterpart, achieving root-mean-square errors that are at least two orders of magnitude better in forward problems. For inverse problems, the maximum errors in the approximated diffusion coefficients by modified AdaI-PINNs are four orders of magnitude better than those of the unmodified version. Additionally, modified AdaI-PINNs demonstrate improved stability in problems with large material mismatches.

42 ENGINEERING↗

Enhanced reliability of drift-diffusion approximation for electrons in fluid models for nonthermal plasmas

Common fluid models used for the description of electron transport in nonthermal discharge plasmas are subject to substantial restrictions if the electron energy transport significantly influences the discharge behaviour. A drift-diffusion approach is presented which is based on a multiterm approximation of the electron velocity distribution function and overcomes some of these restrictions. It is validated using a benchmark model and applied for the analysis of argon discharge plasmas at low and atmospheric pressure. The results are compared to those of common drift-diffusion models as well as to experimental data. It is pointed out that fluid models are able to describe nonlocal phenomena caused by electron energy transport, if the energy transport is consistently described. Numerical difficulties that frequently occur when the conventional drift-diffusion model is consistently applied are avoided by the proposed method.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diffusion of aromatic hydrocarbons in hierarchical mesoporous H-ZSM-5 zeolite

Hierarchical mesoporous zeolites exhibit higher catalytic activities and longer lifetime compared to the traditional microporous zeolites due to improved diffusivity of substrate molecules and their enhanced access to the zeolite active sites. Understanding diffusion of biomass pyrolysis vapors and their upgraded products in such materials is fundamentally important during catalytic fast pyrolysis (CFP) of lignocellulosic biomass, since diffusion makes major contribution to determine shape selectivity and product distribution. However, diffusivities of biomass relevant species in hierarchical mesoporous zeolites are poorly characterized, primarily due to the limitations of the available experimental technology. In this work, molecular dynamics (MD) simulations are utilized to investigate the diffusivities of several selected coke precursor molecules, benzene, naphthalene, and anthracene, in hierarchical mesoporous H-ZSM-5 zeolite. The effects of temperature and size of mesopores on the diffusivity of the chosen model compounds are examined. The simulation results demonstrate that diffusion within the microspores as well as on the external surface of mesoporous H-ZSM-5 dominates only at low temperature. At pyrolysis relevant temperatures, mass transfer is essentially conducted via diffusion along the mesopores. Furthermore, the results illustrate the heuristic diffusion model, such as the extensively used Knudsen diffusion, overestimates the diffusion of bulky molecules in the mesopores, thus making MD simulation a powerful and compulsory approach to explore diffusion in zeolites.

09 BIOMASS FUELS↗

Estimation of Fission Product Transport Parameters for Cesium in the AGR-3/4 TRISO Fuel Experiment

A one-dimensional (1D) finite-element model of fission product transport in the AGR-3/4 experiment has been developed using the Multiphysics Object Oriented Simulation Environment (MOOSE) framework and implemented in the fuel performance code, BISON. The model resolves capsule-specific geometries, materials, and temperature histories and simulates radial migration of fission products from the fuel compact through the inner ring, outer ring, and into the sink ring. Model parameters governing diffusion and sorption were estimated for key fission products – cesium (Cs), and europium (Eu) – by simultaneously fitting modeled isotopic concentration profiles and total ring inventories to a post-irradiation experimental measurement. These data include gamma scanning, liquid scintillation for Sr-90, radial deconsolidation leach-burn-leach analysis, tomographic reconstructions, and destructive physical sampling. A mortar-based interfacial sorption framework was implemented to enforce physically consistent mass transfer and flux conservation across gas gaps. Two classes of parameter sets were derived: a least-squares best-fit, and a safety-oriented conservative-fit, what applies strong penalties for underprediction of sink inventories. Across all twelve capsules, the model successfully reproduces the dominant radial transport trends for Cs, Sr, with decreasing concentrations from the compact outward through successive rings. Cs behavior is captured most consistently, while strontium predictions reveal systematic trade-offs between compact accuracy and conservative sink-ring bounding. The results demonstrate that sink ring weighted calibration provides conservative, safety relevant bounds on low temperature fission product transport, but at the cost of underpredicting compact inventories for Sr isotopes. These discrepancies highlight the need for additional physics, including fast-slow diffusion model, incorporating trapping mechanism in the transport behavior. Overall, this work establishes a robust, capsule-specific modeling framework for AGR-3/4 fission product transport and provides a defensible basis for parameter selection in source-term and fuel performance analyses for high temperature gas-cooled reactors.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

What Does The PAMELA Antiproton Spectrum Tell Us About Dark Matter?

Measurements of the cosmic ray antiproton spectrum can be used to search for contributions from annihilating dark matter and to constrain the dark matter annihilation cross section. Depending on the assumptions made regarding cosmic ray propagation in the Galaxy, such constraints can be quite stringent. We revisit this topic, utilizing a set of propagation models fit to the cosmic ray boron, carbon, oxygen and beryllium data. We derive upper limits on the dark matter annihilation cross section and find that when the cosmic ray propagation parameters are treated as nuisance parameters (as we argue is appropriate), the resulting limits are significantly less stringent than have been previously reported. We also note (as have several previous groups) that simple GALPROP-like diffusion-reacceleration models predict a spectrum of cosmic ray antiprotons that is in good agreement with PAMELA's observations above ~ 5 GeV, but that significantly underpredict the flux at lower energies. Although the complexity of modeling cosmic ray propagation at GeV-scale energies makes it difficult to determine the origin of this discrepancy, we consider the possibility that the excess antiprotons are the result of annihilating dark matter. Suggestively, we find that this excess is best fit for m(DM) ~ 35 GeV and σ v ~ 10(−)(26) cm(3)/s (to bbar b), in good agreement with the mass and cross section previously shown to be required to generate the gamma-ray excess observed from the Galactic Center.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rate constants in spatially inhomogeneous systems

Here, we introduce a theory and accompanying importance sampling method for computing rate constants in spatially inhomogeneous systems. Using the relationship between rate constants and path space partition functions, we illustrate that the relative change in the rate of a rare event through space is isomorphic to the calculation of a free energy difference, albeit in a trajectory ensemble. Like equilibrium free energies, relative rate constants can be estimated by importance sampling. An extension to transition path sampling is proposed that combines biased path ensembles and weighted histogram analysis to accomplish this estimate. We demonstrate that rate constants can also be decomposed into different contributions, including relative changes in stability, barrier height, and flux. This decomposition provides a means of interpretation and insight into rare processes in complex environments. We confirm these ideas with a simple model of diffusion with spatially varying diffusivity and illustrate their utility in a model of ion pair dissociation near an electrochemical interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Explaining persistent incomplete mixing in multicomponent reactive transport with Eulerian stochastic model

We present an Eulerian stochastic advection–diffusion–reaction (SADR) model and use it to explain incomplete mixing typically observed in transport experiments with bimolecular reactions. Unlike traditional advection– dispersion–reaction (ADR) models, the SADR model describes mechanical and diffusive mixing as two separate processes. In the SADR model, mechanical mixing is driven by random advective velocity whose variance is given by the coefficient of mechanical dispersion. The diffusive mixing is modeled as a Fickian diffusion process with the effective diffusion coefficient. We demonstrate that the sum of the two coefficients is equal to the dispersion coefficient, but only the effective diffusion coefficient contributes to the mixing-controlled reactions. We use experimental results of Gramling et al. * * to show that for transport and bimolecular reactions in porous media, the SADR model is significantly more accurate than the ADR model, which overestimates the concentration of the reaction product by as much as 60%. We also show that the SADR model predicts an experimentally observed bell- shaped spatial distribution of the reactive product concentration, while the ADR model results in a concentration distribution with an unphysical kink.

Bimolecular reactions, incomplete mixing, Stochast↗

Mercury’s Chaotic Secular Evolution as a Subdiffusive Process

Abstract Mercury’s orbit can destabilize, generally resulting in a collision with either Venus or the Sun. Chaotic evolution can causeg 1 to decrease to the approximately constant value ofg 5 and create a resonance. Previous work has approximated the variation ing 1 as stochastic diffusion, which leads to a phenomological model that can reproduce the Mercury instability statistics of secular andN-body models on timescales longer than 10 Gyr. Here we show that the diffusive model significantly underpredicts the Mercury instability probability on timescales less than 5 Gyr, the remaining lifespan of the solar system. This is becauseg 1 exhibits larger variations on short timescales than the diffusive model would suggest. To better model the variations on short timescales, we build a new subdiffusive phenomological model forg 1 . Subdiffusion is similar to diffusion but exhibits larger displacements on short timescales and smaller displacements on long timescales. We choose model parameters based on the behavior of theg 1 trajectories in theN-body simulations, leading to a tuned model that can reproduce Mercury instability statistics from 1–40 Gyr. This work motivates fundamental questions in solar system dynamics: why does subdiffusion better approximate the variation ing 1 than standard diffusion? Why is there an upper bound ong 1 , but not a lower bound that would prevent it from reachingg 5 ?

Astronomy & Astrophysics↗

FERMI LARGE AREA TELESCOPE SECOND SOURCE CATALOG

We present the second catalog of high-energy {gamma}-ray sources detected by the Large Area Telescope (LAT), the primary science instrument on the Fermi Gamma-ray Space Telescope (Fermi), derived from data taken during the first 24 months of the science phase of the mission, which began on 2008 August 4. Source detection is based on the average flux over the 24 month period. The second Fermi-LAT catalog (2FGL) includes source location regions, defined in terms of elliptical fits to the 95% confidence regions and spectral fits in terms of power-law, exponentially cutoff power-law, or log-normal forms. Also included are flux measurements in five energy bands and light curves on monthly intervals for each source. Twelve sources in the catalog are modeled as spatially extended. We provide a detailed comparison of the results from this catalog with those from the first Fermi-LAT catalog (1FGL). Although the diffuse Galactic and isotropic models used in the 2FGL analysis are improved compared to the 1FGL catalog, we attach caution flags to 162 of the sources to indicate possible confusion with residual imperfections in the diffuse model. The 2FGL catalog contains 1873 sources detected and characterized in the 100 MeV to 100 GeV range of which we consider 127 as being firmly identified and 1171 as being reliably associated with counterparts of known or likely {gamma}-ray-producing source classes.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling gas–shell mixing in ICF with separated reactants

Mixing between fuel and shell materials in ICF implosions can affect implosion dynamics and even prevent ignition. We use data from a series of separated reactant experiments on the National Ignition Facility to calibrate and test the predictive power of gas–shell mix models. Two models are used to estimate fuel–shell mix: a Reynolds-averaged turbulence model and molecular diffusion. Minor uncertainties in capsule manufacture, experimental conditions, and values for mix model parameters produce significant variation in simulation results. Using input/output pairs from 1D simulations, we train Gaussian process surrogate models to predict experimental quantities of interest. The surrogates are used to construct posteriors for mix model parameters by marginalizing over uncertainties in capsule manufacture and experimental conditions. Mix models are calibrated with a subset of experimental data (neutron yields, ion temperature, and bang time) and tested using the remaining data. In general, both the diffusion and turbulence model correctly predict experimental DT and TT neutron yields. Despite having more free parameters, the turbulence model underpredicts ion temperature at high convergence ratio. Furthermore, the simpler diffusion model correctly predicts these temperatures, suggesting nonhydrodynamic gas–shell mix. The computational model consistently overpredicts DD neutron yield, indicating possible shortcomings outside of the mix model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measuring Diffusivity in Supercooled Liquid Nanoscale Films using Inert Gas Permeation: I. Kinetic Model and Scaling Methods

We describe in detail a diffusion model used to simulate inert gas transport through supercooled liquid overlayers. In recent work, the transport of the inert gas has been shown to be an effective probe of the diffusivity of supercooled liquid methanol in the experimentally challenging regime near the glass transition temperature. The model simulations accurately and quantitatively describe the inert gas permeation desorption spectra. The simulation results are used to validate universal scaling relationships between the diffusivity, overlayer thickness, and the temperature ramp rate for isothermal and temperature programmed desorption. From these scaling relationships we derive simple equations from which the diffusivity can be obtained using the peak desorption time or temperature for an isothermal or set of TPD experiments respectively without numerical simulation. The results presented here demonstrate that the permeation of gases through amorphous overlayers has the potential to be a powerful technique to obtain diffusivity data in deeply supercooled liquids.

10 SYNTHETIC FUELS↗

Nonlinear phase field model for electrodeposition in electrochemical systems

A nonlinear phase-field model has been developed for describing the electrodeposition process in electrochemical systems that are highly out of equilibrium. Main thermodynamic driving forces for the electrode-electrolyte interface (EEI) evolution are limited to local variations of overpotential and ion concentration. Application of the model to Li-ion batteries describes the electrode interface motion and morphology change caused by charge mass transfer in the electrolyte, an electrochemical reaction at the EEI and cation deposition on the electrode surface during the charging operation. The Li electrodeposition rate follows the classical Butler-Volmer kinetics with exponentially and linearly depending on local overpotential and cation concentration at the electrode surface, respectively. Simulation results show that the Li deposit forms a fiber-like shape and grows parallel to the electric field direction. The longer and thicker deposits are observed both for higher current density and larger rate constant where the surface reaction rate is expected to be high. The proposed diffuse interface model well captures the metal electrodeposition phenomena in plenty of non-equilibrium electrochemical systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗