Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffusion length”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Transition Behavior of Surface Morphology Evolution of Si(100) During Low-Energy Normal-Incidence Ar+ Ion Bombardment

The temperature dependence of the surface morphology evolution during 1000 eV Ar{sup +} ion bombardment of Si(100) surfaces at normal incidence is studied in real time. At room temperature the surface is amorphized by the ion bombardment but remains smooth. Calculations suggest this may be due to ion impact induced lateral mass redistribution. However, at the fluxes used here, surface roughening occurs above 400 C, and in the range of 400 C to 500 C a transition region from amorphous to crystalline surface is observed. Above 500 C, the surface remains crystalline and the growing corrugations exhibit dynamic scaling with power law growth in amplitude and characteristic length scale. This behavior is characteristic of instabilities driven by surface diffusion processes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization and Fabrication of ZnO Nanowires Grown on AlN Thin Film

In this paper, we report ZnO nanowires grown on AlN thin film deposited on glass as substrate by physical vapour deposition. The temperature of substrates was kept between 600 deg. C and 500 deg. C during the growth. The typical average diameters of the obtained nanowires on substrate at 600 deg. C and 500 deg. C was about 57 nm and 22 nm, respectively with several micrometers in lengths. X-ray diffraction and Auger spectroscopy results showed Al diffused from AlN thin film into ZnO nanowires for sample at high temperature zone. In the photoluminescence spectra two emission bands appeared, one related to ultraviolet emission with a strong peak at 380-382 nm, and another related to deep level emission with a weak peak at 510 nm.

36 MATERIALS SCIENCE↗

Low-Resistance, High-Yield Electrical Contacts to Atom Scale Si:P Devices Using Palladium Silicide

Scanning tunneling microscopy (STM) enables the fabrication of two-dimensional δ-doped structures in Si with atomistic precision, with applications from tunnel field-effect transistors to qubits. The combination of a very small contact area and the restrictive thermal budget necessary to maintain the integrity of the δ layer make developing a robust electrical contact method a significant challenge to realizing the potential of atomically precise devices. We demonstrate a method for electrical contact using Pd 2 Si formed at the temperature of silicon overgrowth (250 °C), minimizing the diffusive impact on the δ layer. Here, we use the transfer length method to show our Pd 2 Si contacts have very high yield (99.7% +0.2% –1.5%) and low resistivity (272 ± 41 Ω μm) in contacting mesa-etched Si:P δ layers. We also present three terminal measurements of low contact resistance (<1 kΩ) to devices written by STM hydrogen depassivation lithography with similarly high yield (100% +0% –3.2%).

2-dimensional systems↗

Spin dynamics and exchange interaction in orthoferrite TbFeO 3 with non-Kramers rare-earth ion

The low-temperature spin dynamics of the orthorhombic TbFeO 3 perovskite has been studied. It has been found that the inelastic neutron scattering (INS) spectrum of the investigated compound contains two modes corresponding to different sublattices. It is shown that the iron subsystem orders antiferromagnetically at T N =632 K and exhibits the high-energy magnon dispersion. The magnetic dynamics of this subsystem has been described within the linear spin wave theory and the in-plane and out-of-plane exchange anisotropy has been demonstrated. The approach proposed previously to describe the magnon dispersion in the TmFeO 3 compound has been used. Three levels of the nondispersive crystal electric field corresponding to Tb 3+ ions have been found in the energy region below 40 meV at about 17, 26, and 35 meV. The behavior of the magnetic correlation length of the terbium subsystem has been determined by studying the diffuse scattering at different temperatures. The evolution of this subsystem has been numerically described within the point charge model. In conclusion, it is shown that the numerical data agree satisfactorily with the experiment and with the general concept of the single-ion approximation applied to the rare-earth subsystem of orthorhombic perovskites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improving the diffraction of full-length human selenomethionyl metavinculin crystals by streak-seeding

Metavinculin is an alternatively spliced isoform of vinculin that has a 68-residue insert in its tail domain (1134 total residues) and is exclusively expressed in cardiac and smooth muscle tissue, where it plays important roles in myocyte adhesion complexes. Mutations in the metavinculin-specific insert are associated with dilated cardiomyopathy (DCM) in man. Crystals of a DCM-associated mutant of full-length selenomethionine-labeled metavinculin grown by hanging-drop vapor diffusion diffracted poorly and were highly sensitive to radiation, preventing the collection of a complete X-ray diffraction data set at the highest possible resolution. Streak-seeding markedly improved the stability, crystal-growth rate and diffraction quality of DCM-associated mutant metavinculin crystals, allowing complete data collection to 3.9 {angstrom} resolution. These crystals belonged to space group P4{sub 3}2{sub 1}2, with two molecules in the asymmetric unit and unit-cell parameters a = b = 170, c = 211 {angstrom}, {alpha} = {beta} = {gamma} = 90{sup o}.

59 BASIC BIOLOGICAL SCIENCES↗

Star Formation at z = 2.481 in the Lensed Galaxy SDSS J1110+6459. II. What is Missed at the Normal Resolution of the Hubble Space Telescope?

For lensed galaxy SGAS J111020.0+645950.8 at redshift z = 2.481, which is magnified by a factor of 28 ± 8, we analyze the morphology of star formation, as traced by rest-frame ultraviolet emission, in both the highly magnified source plane and simulations of how this galaxy would appear without lensing magnification. Were this galaxy not lensed, but rather drawn from a Hubble Space Telescope deep field, we would conclude that almost all its star formation arises from an exponential disk (Sérsic index of 1.0 ± 0.4) with an effective radius of r{sub e}=2.7±0.3 kpc measured from two-dimensional fitting to F606W using Galfit, and r{sub e}=1.9±0.1 kpc measured by fitting a radial profile to F606W elliptical isophotes. At the normal spatial resolution of the deep fields, there is no sign of clumpy star formation within SGAS J111020.0+645950.8. However, the enhanced spatial resolution enabled by gravitational lensing tells a very different story; much of the star formation arises in two dozen clumps with sizes of r = 30–50 pc spread across the 7 kpc length of the galaxy. The color and spatial distribution of the diffuse component suggests that still-smaller clumps are unresolved. Despite this clumpy, messy morphology, the radial profile is still well-characterized by an exponential profile. In this lensed galaxy, stars are forming in complexes with sizes well below 100 pc; such sizes are wholly unexplored by surveys of galaxy evolution at 1<z<3.

79 ASTRONOMY AND ASTROPHYSICS↗

Homogenization for Periodic Heterogeneous Materials with Arbitrary Position-Dependent Material Properties

We present a rigorous homogenization approach for efficient computation of a class of physical problems in a one-dimensional periodic heterogeneous material. This material is represented by a spatially periodic array of unit cells with a length of e. More specifically, the method is applied to the diffusion, heat conduction, and wave propagation problems. Heterogeneous materials can have arbitrary position-dependent continuous or discontinuous materials properties (for example heat conductivity) within the unit cell. The final effective model includes both effective properties at the leading order and high-order contributions due to the microscopic heterogeneity. A dimensionless heterogeneity parameter ß is defined to represent high-order contributions, shown to be in the range of [-1/12, 0], and has a universal expression for all three problems. Both effective properties and heterogeneity parameter ß are independent of e, the microscopic scale of heterogeneity. The homogenized solution describing macroscopic variations can be obtained from the effective model. Solution with sub-unit-cell accuracy can be constructed based on the homogenized solution and its spatial derivatives. The paper represents a general approach to obtain the effective model for arbitrary periodic heterogeneous materials with position-dependent properties.

conduction↗

ACCELERATION OF VERY SMALL DUST GRAINS DUE TO RANDOM CHARGE FLUCTUATIONS

We study the acceleration of very small dust grains including polycyclic aromatic hydrocarbons arising from electrostatic interactions of dust grains that have charge fluctuating randomly in time. Random charge fluctuations of very small grains due to discrete charging events (i.e., sticking collisions with electrons and ions in plasma, and emission of photoelectrons by UV photons) are simulated using the Monte Carlo (MC) method. The motion of dust grains in randomly fluctuating electric fields induced by surrounding charged grains is studied using MC simulations. We identify the acceleration induced by random charge fluctuations as a dominant acceleration mechanism for very small grains in the diffuse interstellar medium (ISM). We find that this acceleration mechanism is efficient for environments with a low degree of ionization (i.e., large Debye length), where charge fluctuations are slow but have a large amplitude. The implications of the present acceleration mechanism for grain coagulation and shattering in the diffuse ISM and dark clouds are also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron profile stiffness and critical gradient studies

Electron profile stiffness was studied in DIII-D L-mode discharges by systematically varying the heat flux in a narrow region with electron cyclotron heating and measuring the local change produced in {nabla}T{sub e}. Electron stiffness was found to slowly increase with toroidal rotation velocity. A critical inverse temperature gradient scale length 1/L{sub C} {approx} 3 m{sup -1} was identified at {rho}=0.6 and found to be independent of rotation. Both the heat pulse diffusivity and the power balance diffusivity, the latter determined by integrating the measured dependence of the heat pulse diffusivity on -{nabla}T{sub e}, were fit reasonably well by a model containing a critical inverse temperature gradient scale length and varying linearly with 1/L{sub T} above the threshold.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mean force on a finite-sized rigid particle, droplet, or bubble in a viscous compressible medium

In this paper, a force formulation to compute the axial acoustic mean second-order force on finite-sized compressible and rigid particles is presented. The flow inside and outside the spherical inclusion is considered viscous and compressible. Other than for volumetric pulsations of the bubble/droplet, the sphericity of the inclusion is maintained (taken to be unity). A far-field derivation approach has been used to compute the force due to standing and traveling waves; and the force is expressed as a multipole expansion (infinite series). In case of a bubble and a rigid particle, there exist three length scales that govern the mean second-order force: mean radius of the spherical inclusion (R 0 ), wavelength of the incoming acoustics (λ), and the momentum diffusion thickness of the ambient fluid (δ o ). While R 0 and λ are arbitrary, we assume the viscous length scale is negligibly small compared to the acoustic wavelength. In case of a droplet, however, the following additional parameters (inside to outside fluid ratios) also play a role: density ratio ($\sim\atop{p}$), viscosity ratio ($\sim\atop{μ}$, and speed of sound ratio ($\sim\atop{c}$). The force expression yields the correct behavior in several limiting cases considered: (i) inviscid bubble and droplets with R 0 /λ « 1, (ii) inviscid bubbles with finite R 0 /λ, and (iii) finite size rigid immovable particles. In general, while the monopole alone is sufficient to capture the force for small bubbles, higher-order terms are found to be important when R 0 /λ ≥ 0.02. In addition to reporting similar behavior for droplets, we study the effect arising from $\sim\atop{p}$, $\sim\atop{μ}$, $\sim\atop{c}$, and δ o /R 0 on the mean second-order force.

42 ENGINEERING↗

Reshaping, Intermixing, and Coarsening for Metallic Nanocrystals: Nonequilibrium Statistical Mechanical and Coarse-Grained Modeling

Self-assembly of supported 2D or 3D nanocrystals (NCs) by vacuum deposition and of 3D NCs by solution-phase synthesis (with possible subsequent transfer to a support) produces intrinsically nonequilibrium systems. Individual NCs can have far-from-equilibrium shapes and composition profiles. The free energy of NC ensembles is lowered by coarsening which can involve Ostwald ripening or Smoluchowski ripening (NC diffusion and coalescence). Preservation of individual NC structure and inhibition of coarsening are key, e.g., for avoiding catalyst degradation. This review focuses on postsynthesis evolution of metallic NCs. Atomistic-level modeling typically utilizes stochastic lattice-gas models to access appropriate time and length scales. However, predictive modeling requires incorporation of realistic rates for relaxation mechanisms, e.g., periphery diffusion and intermixing, in numerous local environments (rather than the use of generic prescriptions). Alternative coarse-grained modeling must also incorporate appropriate mechanisms and kinetics. At the level of individual NCs, we present analyses of reshaping, including sintering and pinch-off, and of compositional evolution in a vacuum environment. Here, we also discuss modeling of coarsening including diffusion and decay of individual NCs and unconventional coarsening processes. We describe high-level modeling integrated with scanning tunneling microscopy (STM) studies for supported 2D epitaxial nanoclusters and developments in modeling for 3D NCs motivated by in situ transmission electron microscopy (TEM) studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A simple Boltzmann transport equation for ballistic to diffusive transient heat transport

Developing simplified, but accurate, theoretical approaches to treat heat transport on all length and time scales is needed to further enable scientific insight and technology innovation. Using a simplified form of the Boltzmann transport equation (BTE), originally developed for electron transport, we demonstrate how ballistic phonon effects and finite-velocity propagation are easily and naturally captured. We show how this approach compares well to the phonon BTE, and readily handles a full phonon dispersion and energy-dependent mean-free-path. This study of transient heat transport shows (i) how fundamental temperature jumps at the contacts depend simply on the ballistic thermal resistance, (ii) that phonon transport at early times approach the ballistic limit in samples of any length, and (iii) perceived reductions in heat conduction, when ballistic effects are present, originate from reductions in temperature gradient. Importantly, this framework can be recast exactly as the Cattaneo and hyperbolic heat equations, and we discuss how the key to capturing ballistic heat effects is to use the correct physical boundary conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ballistic-diffusive phonon transport in cellulose nanocrystals by ReaxFF molecular dynamics simulations

Cellulose nanocrystals (CNCs), a ubiquitous nano-sized natural biopolymer, have drawn considerable attention in recent years due to their excellent mechanical and chemical properties. However, thermal properties of CNCs, which are critical for their potential applications as structural or functional materials, are less investigated. In this work, their thermal properties were systematically studied by molecular dynamics (MD) simulations in terms of the effects of polymorphs, size, temperature, and strain. It was found that the thermal conductivities depend on the polymorphs of CNCs, but the thermal conductance of unit chain of each polymorph is similar. Moreover, the strong dependence of the thermal conductivities of CNCs on their length and cross-sectional area indicates the existence of remarkable ballistic-diffusive phonon transport. Single chain CNCs can achieve a thermal conductivity of ~6 W/(m∙K), implying their potential as high thermal conductive polymer. The mechanical strain can enhance the alignment of cellulose skeleton, which reduces phonon scattering and thus increases thermal conductivity. Possible underlying mechanism of the varying thermal conductivity was further discussed and attributed to the shift of phonon frequencies and varied degree of orientation. This study reveals the sophisticated ballistic-diffusive phonon transport in CNCs, and pave path to future design of CNC-based materials with desirable thermal properties.

42 ENGINEERING↗

Spectral induced polarization monitoring of induced calcite precipitation in subsurface sediments

Co-precipitation of contaminants within the crystalline structure of calcite is a promising natural attenuation or remedial technology being considered at contaminated sites. We explore the sensitivity of the spectral induced polarization (SIP) method to induced calcite precipitation in natural sediments as a path forward to non-invasively monitor these sites. We performed time-lapse column experiments using phased (I-IV) injections over 40 days on natural sediments from the Hanford Site (Washington State, USA). In the phased injections, abiotic calcite precipitation was induced and confirmed to have occurred. Previous work in glass beads and homogeneous sand was limited to high frequency detection of calcite, however in this work we observed the development of two polarization mechanisms, one at high frequency (>100 Hz) and one at low frequency (< 100 Hz). Based on the characteristic frequencies from the SIP high and low frequency regimes, characteristic length scales (L) were computed where the adsorption mode of Na+ versus Ca2+ was compared by using diffusion coefficients corresponding to Na+ versus an arithmetically averaged value for Na+ and Ca2+. Using the diffusion coefficient of Na+, the high frequency L was found to correlate well with the size of the calcite crystals. The low frequency L correlated well with the individual natural sediment grain sizes within the columns. During late experimental times (day 36 and 40), the characteristic low frequency in two of the experimental columns shifted to lower frequencies (<0.001 Hz) which may signify SIP sensitivity of the formed calcite with the sediment grains. In field applications, the development of a low frequency polarization length scale to monitor calcite precipitation is promising for field monitoring applications, however further laboratory work needs to be performed to examine the SIP sensitivity of calcite formation in the presence of to natural sediments

calcium carbonate, calcite, precipitation, spectra↗

Particle-in-cell simulation of collisionless reconnection with open outflow boundaries

A new method for applying open boundary conditions in particle-in-cell (PIC) simulations is utilized to study magnetic reconnection. Particle distributions are assumed to have zero normal derivatives at the boundaries. Advantages and possible limitations of this method for PIC simulations are discussed. Results from a reconnection simulation study are presented. For the purpose of this investigation, a 2 (1/2)-dimensional electromagnetic PIC simulation using open conditions at the outflow boundaries and simple reflecting boundaries to the inflow regions is discussed. The electron diffusion region is defined as that region where the out-of-plane electron inertial electric field is positive indicating acceleration and flux transfer; the evolution of this region is analyzed. It is found that this region varies in the range 2.5-4 local electron inertial lengths in total width and in the range 10-15 local electron inertial lengths in total length for the mass ratio 25. The reconnection rate is investigated in terms of the aspect ratio of the electron diffusion region plus inflow and outflow measures at its boundaries. It is shown that a properly measured aspect ratio predicts the flux transfer rate, scaled to account for the decline in field strength and electron density at the inflow boundary to the electron diffusion region. It is concluded that this electron diffusion region either adjusts its aspect ratio for compatibility with the flux transfer rate that is set elsewhere, as in the Hall reconnection model, or that it is this region that controls the reconnection flux transfer rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nucleation and growth of GaN nanorods on Si (111) surfaces by plasma-assisted molecular beam epitaxy - The influence of Si- and Mg-doping

The self-assembled growth of GaN nanorods on Si (111) substrates by plasma-assisted molecular beam epitaxy under nitrogen-rich conditions is investigated. An amorphous silicon nitride layer is formed in the initial stage of growth that prevents the formation of a GaN wetting layer. The nucleation time was found to be strongly influenced by the substrate temperature and was more than 30 min for the applied growth conditions. The observed tapering and reduced length of silicon-doped nanorods is explained by enhanced nucleation on nonpolar facets and proves Ga-adatom diffusion on nanorod sidewalls as one contribution to the axial growth. The presence of Mg leads to an increased radial growth rate with a simultaneous decrease of the nanorod length and reduces the nucleation time for high Mg concentrations.

36 MATERIALS SCIENCE↗

Intermediate time sub-diffusion and stress relaxation in ring polymer melts

The slow dynamics of non-concatenated ring melts remains a frontier problem in polymer science with implications for many soft material environments including cellular biophysics. Here, in this work, we report large-scale simulations of model ring melts that analyze the monomer and center-of-mass (CM) mean square displacements (MSD) and stress relaxation function on intermediate time and length scales. The degree of dynamical slowing down is characterized by the maximally sub-diffusive fractional time scaling exponents. The data span an exceptionally wide range of ring degrees of polymerization and stiffnesses and are not successfully organized based on the classic measure linear chain entanglement, N/N e . Rather, we find that the crossover degree of polymerization, N D , based on ring macromolecular caging that successfully allows master curves to be constructed for the long-time CM self-diffusion constant also collapses these temporal dynamic scaling exponents. Different properties display different exponents and exhibit one or two regimes of linear variation with the logarithm of N D / N . A distinct crossover of the CM-MSD and stress relaxation exponents emerges at sufficiently large N or stiffness that is not found for the monomer MSD, indicating a novel form of dynamic decoupling. This crossover aligns with the predicted critical degree of polymerization for transitioning from a weak to strong caging regime, indicative of activated transport. The latter may reflect the emergence of an intermolecular collective contribution to stress in analogy with dense soft colloidal matter. Suggestions are made for future theoretical work to address the rich patterns of behavior discovered.

Anomalous diffusion↗