Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “defective engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Pulse-echo phased array ultrasonic inspection of pultruded rod stitched efficient unitized structure (PRSEUS)

A PRSEUS test article was subjected to controlled impact on the skin face followed by static and cyclic axial compressions. Phased array ultrasonic inspection was conducted before impact, and after each of the test conditions. A linear phased array probe with a manual X-Y scanner was used for interrogation. Ultrasound showed a delamination between the skin and stringer flange adjacent to the impact. As designed, the stitching in the flange arrested the lateral flaw formation. Subsequent ultrasonic data showed no delamination growth due to continued loading.

42 ENGINEERING↗

Selective modulation of electronic transport in VO 2 induced by 10 keV helium ion irradiation

Vanadium dioxide (VO 2 ) manifests an abrupt metal–insulator transition (MIT) from monoclinic to rutile phases, with potential use for tunable electronic and optical properties and spiking neuromorphic devices. Understanding pathways to modulate electronic transport in VO 2 , as well as its response to irradiation (e.g., for space applications), is critical to better enable these applications. In this work, we investigate the selective modulation of electronic transport in VO 2 films subject to different 10 keV helium ion (He + ) fluences. Under these conditions, the resistivity in the individual monoclinic and rutile phases varied by 50%–200%, while the MIT transformation temperature remains constant within 4 °C independent of irradiation fluence. Importantly, different trends in the resistivity of the monoclinic and rutile phases were observed both as a function of total He fluence as well as in films grown on different substrates (amorphous SiO 2 /Si vs single crystal Al 2 O 3 ). Through a combination of measurements including majority carrier sign via Seebeck, low frequency noise, and TEM, our investigation supports the presence of different kinds of point defects (V in; O in), which may arise due to grain boundary defect interactions. Our work suggests the utility of He irradiation for the selective modulation of VO 2 transport properties for neuromorphic, in contrast to other established but non-selective methods, like doping.

36 MATERIALS SCIENCE↗

Emulating 2D Materials with Magnons

Spin waves (magnons) in two-dimensional (2D) materials have received increasing interest due to their unique states and potential for tunability. However, many interesting features of these systems, including Dirac points and topological states, occur at high frequencies, where experimental probes are limited. Here, we study a crystal formed by patterning a hexagonal array of holes in a perpendicularly magnetized thin film. Through simulation, we find that the magnonic band structure imitates that of graphene, but additionally has some kagomelike character and includes a few flat bands. Surprisingly, its nature can be understood using a nine-band tight-binding Hamiltonian. This clear analogy to 2D materials enables band-gap engineering in 2D, topological magnons along 1D phase boundaries, and spectrally isolated modes at 0D point defects. Interestingly, the 1D phase boundaries allow access to the valley degree of freedom through a magnonic analog of the quantum valley Hall insulator. These approaches can be extended to other magnonic systems, but are potentially more general due to the simplicity of the model, which resembles existing results from electron, phonon, photon, and cold-atom systems. This finding brings the physics of spin waves in 2D materials to more experimentally accessible scales, augments it, and outlines a few principles for controlling magnonic states.

Ferrimagnets↗

Generalizable Mechanistic Understanding of Module-Level Light-Moisture and Thermal-Induced Instabilities in CIGS Photovoltaics (Final Report)

The objectives of this project are to identify the root causes of light, heat and humdity induced instabilities in the operation and accelerated testing of commercial Cu(In,Ga)Se 2 [CIGS] photovoltaic modules produced by major module manufacturers (e.g.: Solibro and MiaSolé), correlate them with module degradation/failure modes, and produce accurate service lifetime prediction models.

14 SOLAR ENERGY↗

Failure analysis of a tool steel torque shaft

A low design load drive shaft used to deliver power from an experimental exhaust heat recovery system to the crankshaft of an experimental diesel truck engine failed during highway testing. An independent testing laboratory analyzed the failure by routine metallography and attributed the failure to fatigue induced by a banded microstructure. Visual examination by NASA of the failed shaft plus the knowledge of the torsional load that it carried pointed to a 100 percent ductile failure with no evidence of fatigue. Scanning electron microscopy confirmed this. Torsional test specimens were produced from pieces of the failed shaft and torsional overload testing produced identical failures to that which had occurred in the truck engine. This pointed to a failure caused by a high overload and although the microstructure was defective it was not the cause of the failure.

Reagan, J. R.↗

Repair and Utilization of the Kratos XSAM 800 X-Ray Photoelectron Spectrometer (XPS)

The objectives for this summer faculty fellowship were first to repair the Kratos XSAM 800 X-ray Photoelectron Spectrometer (XPS) and then to utilize the instrument to participate in ongoing research projects at KSC and in the researcher's own laboratory at UCF. The first 6 weeks were used in repairing the instrument. Working both alone and with the Kratos service engineer, a number of hardware problems, largely associated with the sample stage control system, were corrected. Defective parts were identified and fixed in the computer driver boards, the stage power supply, and the driver interface. The power supply was completely replaced. After four weeks of work, the instrument was functional. This occurred on a Wednesday. The following Friday the instrument had to be completely shut down because the power to the O & C Building was to be turned off. The instrument was properly secured. On Monday, the instrument was powered up and the original problems returned. After another 2 weeks of work, a software problem was identified. This problem caused the computer to use a defective port for the sample stage control. It was circumvented by rewriting the startup routine. The final 3 weeks of the fellowship were spent using the XPS to analyze samples being studied in the Langley materials project (Martha Williams) and a catalyst project (Dr. Orlando Melendez). During this time, several sample analysis requests from other groups at KSC also came in and those samples were run as well. The summer faculty fellowship also allowed many contacts to be made. After meeting with the sensors group, two projects were identified for collaboration and white papers are being prepared. One project aims to develop small, very sensitive hydrogen detectors and the other to develop a broad area, easily monitored, zero power consumption hydrogen detector. In addition to the work mentioned above, the XPS was utilized in a study underway in Dr. Hampton's laboratory at UCF.

Hampton, Michael D.↗

JPL/NASA/IEEE Test Effectiveness Workshop

(none given)From OBJECTIVES: Specific objectives of the working group are to support the innovation, development, evaluation and implementation of test methods, metrics and tools based on failure engineering/physics and/or root cause evaluations. Data sources systems and tools shall be developed and implemented that: 1) provide improved preventions, controls, analyses and tests (PACT) & field failure data collection, 2) facilities data analysis, archiving, retrieval, failure physics and/or root cause evaluations and 3) enable new and existing technology suitability evaluations to be performed.

effectiveness concurrent engineering metrics test ↗

Quantify Resonance Inspection with Finite Element-Based Modal Analyses

Resonance inspection uses the natural acoustic resonances of a part to identify anomalous parts. Modern instrumentation can measure the many resonant frequencies rapidly and accurately. Sophisticated sorting algorithms trained on sets of good and anomalous parts can rapidly and reliably inspect and sort parts. This paper aims at using finite-element-based modal analysis to put resonance inspection on a more quantitative basis. A production-level automotive steering knuckle is used as the example part for our study. First, the resonance frequency spectra for the knuckle are measured with two different experimental techniques. Next, scanning laser vibrometry is used to determine the mode shape corresponding to each resonance. The material properties including anisotropy are next measured to high accuracy using resonance spectroscopy on cuboids cut from the part. Then, finite element model (FEM) of the knuckle is generated by meshing the actual part geometry obtained with computed tomography (CT). The resonance frequencies and mode shapes are next predicted with a natural frequency extraction analysis after extensive mesh size sensitivity study. The good comparison between the predicted and the experimentally measured resonance spectra indicate that finite-element-based modal analyses have the potential to be a powerful tool in shortening the training process and improving the accuracy of the resonance inspection process for a complex, production level part. The finite element based analysis can also provide a means to computationally test the sensitivity of the frequencies to various possible defects such as porosity or oxide inclusions especially in the high stress regions that the part will experience in service.

99 GENERAL AND MISCELLANEOUS↗

Experimental evaluation of the high temperature thermo-physical properties of UO{sub 2}

High temperature properties of UO{sub 2} are reported, in particular thermal conductivity, specific heat capacity, thermal diffusivity and melting point. All are measured with a single laser flash apparatus coupled with a numerical inverse method. The thermal conductivity, spectral emissivity, specific heat capacity, thermal diffusivity and melting point are in very good agreement with established literature values indicating the validity of the methodology and its potential for measuring these properties up to melting. The melting point was identified to be (3118 ± 28) K. The thermal conductivity exhibits a minimum between 1800 and 2100 K due to the competition between phonon scattering and an increase in the concentration of free charge carriers. The substantial increase in specific heat can be predominantly attributed to the formation of oxygen Frenkel pairs. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Minimizing the diffusivity difference between vacancies and interstitials in multi-principal element alloys

Interstitial atoms usually diffuse much faster than vacancies, which is often the root cause for the ineffective recombination of point defects in metals under irradiation. Here, via ab initio modeling of single-defect diffusion behavior in the equiatomic NiCoCrFe(Pd) alloy, we demonstrate an alloy design strategy that can reduce the diffusivity difference between the two types of point defects. The two diffusivities become almost equal after substituting the NiCoCrFe base alloy with Pd. The underlying mechanism is that Pd, with a much larger atomic size (hence larger compressibility) than the rest of the constituents, not only heightens the activation energy barrier ( E a ) for interstitial motion by narrowing the diffusion channels but simultaneously also reduces E a for vacancies due to less energy penalty required for bond length change between the initial and the saddle states. Our findings have a broad implication that the dynamics of point defects can be manipulated by taking advantage of the atomic size disparity, to facilitate point-defect annihilation that suppresses void formation and swelling, thereby improving radiation tolerance.

36 MATERIALS SCIENCE↗

Anomaly Detection Techniques with Real Test Data from a Spinning Turbine Engine-Like Rotor

Online detection techniques to monitor the health of rotating engine components are becoming increasingly attractive to aircraft engine manufacturers in order to increase safety of operation and lower maintenance costs. Health monitoring remains a challenge to easily implement, especially in the presence of scattered loading conditions, crack size, component geometry, and materials properties. The current trend, however, is to utilize noninvasive types of health monitoring or nondestructive techniques to detect hidden flaws and mini-cracks before any catastrophic event occurs. These techniques go further to evaluate material discontinuities and other anomalies that have grown to the level of critical defects that can lead to failure. Generally, health monitoring is highly dependent on sensor systems capable of performing in various engine environmental conditions and able to transmit a signal upon a predetermined crack length, while acting in a neutral form upon the overall performance of the engine system.

Abdul-Aziz, Ali↗

On the bipolar resistive-switching characteristics of Al₂O₃- and HfO₂-based memory cells operated in the soft-breakdown regime

In this article, we investigate extensively the bipolar-switching properties of Al₂O₃- and HfO₂-based resistive-switching memory cells operated at low current down to <1 μA. We show that the switching characteristics differ considerably from those typically reported for larger current range (>15 μA), which we relate as intrinsic to soft-breakdown (SBD) regime. We evidence a larger impact of the used switching-oxide in this current range, due to lower density of oxygen-vacancy (V{sub o}) defects in the SBD regime. In this respect, deep resetting and large memory window may be achieved using the stoichiometric Al₂O₃ material due to efficient V{sub o} annihilation, although no complete erasure of the conductive-filament (CF) is obtained. We finally emphasize that the conduction may be described by a quantum point-contact (QPC) model down to very low current level where only a few V{sub o} defects compose the QPC constriction. The large switching variability inherent to this latter aspect is mitigated by CF shape tuning through adequate engineering of an Al₂O₃\HfO₂ bilayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Viability Study for an Unattended UF 6 Cylinder Verification Station: Phase I Final Report

In recent years, the International Atomic Energy Agency (IAEA) has pursued innovative techniques and an integrated suite of safeguards measures to address the verification challenges posed by the front end of the nuclear fuel cycle. Among the unattended instruments currently being explored by the IAEA is an Unattended Cylinder Verification Station (UCVS) that could provide automated, independent verification of the declared relative enrichment, 235 U mass, total uranium mass and identification for all declared UF 6 cylinders in a facility (e.g., uranium enrichment plants and fuel fabrication plants). Under the auspices of the United States and European Commission Support Programs to the IAEA, a project was undertaken to assess the technical and practical viability of the UCVS concept. The US Support Program team consisted of Pacific Northwest National Laboratory (PNNL, lead), Los Alamos National Laboratory (LANL), Oak Ridge National Laboratory (ORNL) and Savanah River National Laboratory (SRNL). At the core of the viability study is a long-term field trial of a prototype UCVS system at a Westinghouse fuel fabrication facility. A key outcome of the study is a quantitative performance evaluation of two nondestructive assay (NDA) methods being considered for inclusion in a UCVS: Hybrid Enrichment Verification Array (HEVA), and Passive Neutron Enrichment Meter (PNEM). This report provides context for the UCVS concept and the field trial: potential UCVS implementation concepts at an enrichment facility; an overview of UCVS prototype design; field trial objectives and activities. Field trial results and interpretation are presented, with a focus on the performance of PNEM and HEVA for the assay of over 200 “typical” Type 30B cylinders, and the viability of an “NDA Fingerprint” concept as a high-fidelity means to periodically verify that the contents of a given cylinder are consistent with previous scans. A modeling study, combined with field-measured instrument uncertainties, provides an assessment of the partial-defect sensitivity of HEVA and PNEM for both one-time assay and (repeated) NDA Fingerprint verification scenarios. The findings presented in this report represent a significant step forward in the community’s understanding of the strengths and limitations of the PNEM and HEVA NDA methods, and the viability of the UCVS concept in front-end fuel cycle facilities. This experience will inform Phase II of the UCVS viability study, should the IAEA pursue it.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Comparison of synthetic aperture radar and impact-echo imaging for detecting delamination in concrete

In this paper we evaluate the utility of microwave and mechanical wave nondestructive testing techniques to detect delamination in reinforced concrete bridge deck mock-up samples. The mechanical wave tests comprise air-coupled impact-echo measurements, while the microwave measurements comprise three-dimensional synthetic aperture radar imaging using wideband reflectometery in the frequency range of 1–4 GHz. The results of these investigations are presented in terms of images that are generated from these data. Based on a comparison of the results, we show that the two methods are complementary, in that provide distinct capabilities for defect detection. More specifically, the former approach is unable to detect depth of a delaminated region, while the latter may provide this information. Therefore, the two methods may be used in a complementary fashion (i.e., data fusion) to give more comprehensive information about the 3D location of delamination.

42 ENGINEERING↗

Lattice distortion in single crystal rare-earth arsenide/GaAs nanocomposites

Epitaxial single crystal nanocomposites comprised of rare-earth arsenide nanoparticles embedded in GaAs (001) layers produce a larger change in lattice parameter than expected from the lattice parameters of relaxed films. Despite similar cubic structures and lattice parameters, elongation of the interfacial bond length between the two materials induces additional strain causing an expansion in the nanocomposite lattice. The interface bond length is material dependent with an average atomic layer spacing at the ErAs:GaAs interface of 1.9 Å while the spacing at the ScAs:GaAs interface is only 1.4 Å. Implications for lattice matching various single crystal epitaxial nanostructures in semiconductors are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain–Activated Stimulated Emission from Multilayer MoSe 2 in a Narrow Operation Window

Herein, photoluminescence (PL) and fluorescence lifetime imaging (FLIM) in multilayer MoSe 2 are studied. Strain-activated stimulated emission via defect levels in multilayer MoSe 2 under laser excitation is observed, for the first time in defects of transition metal dichalcogenides. The stimulated emission is indicated by a threshold behavior of PL emission intensity with respect to laser intensity, strong polarization effects, achieved population inversion with a difference in lifetimes of two competing excited states, and localization of the stimulated emission zone as observed in FLIM. Here, the presented results not only demonstrate strain-activated stimulated emission and highlight the necessity of strain engineering in tailoring 2D layered materials for optoelectronic applications, but also shed light on the design of stimulated emission in transition metal dichalcogenide's defects to tailor for potential single-photon emission behavior.

enhanced emission↗

Classification of computed thermal tomography images with deep learning convolutional neural network

Thermal tomography (TT) is a computational method for the reconstruction of depth profile of the internal material defects from Pulsed Infrared Thermography (PIT) nondestructive evaluation. Here, the PIT method consists of recording material surface temperature transients with a fast frame infrared camera, following thermal pulse deposition on the material surface with a flashlamp and heat diffusion into material bulk. TT algorithm obtains depth reconstructions of thermal effusivity, which has been shown to provide visualization of the subsurface internal defects in metals. In many applications, one needs to determine the defect shape and orientation from reconstructed effusivity images. Interpretation of TT images is non-trivial because of blurring, which increases with depth due to the heat diffusion-based nature of image formation. We have developed a deep learning convolutional neural network (CNN) to classify the size and orientation of subsurface material defects in TT images. CNN was trained with TT images produced with computer simulations of 2D metallic structures (thin plates) containing elliptical subsurface voids. The performance of CNN was investigated using test TT images developed with computer simulations of plates containing elliptical defects, and defects with shapes imported from scanning electron microscopy images. CNN demonstrated the ability to classify radii and angular orientation of elliptical defects in previously unseen test TT images. We have also demonstrated that CNN trained on the TT images of elliptical defects is capable of classifying the shape and orientation of irregular defects.

42 ENGINEERING↗

Evaluation of subsurface damage in concrete deck joints using impact echo method

Many factors can affect the overall performance and longevity of highway bridges, including the integrity of their deck joints. This study focuses on the evaluation of subsurface damage in deteriorated concrete deck joints, which includes the delamination and corrosion of the reinforcement. Impact echo and surface wave technology, mainly a portable seismic property analyzer (PSPA), were employed to evaluate the structural deficiency of concrete joints. Laboratory tests of core samples were conducted to verify the nondestructive test results. As a result, the primary advantage of the PSPA as a bridge assessment tool lies in its ability to assess the concrete’s modulus and to detect subsurface defects at a particular point simultaneously.

42 ENGINEERING↗