Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Some effects of applying sonic boom minimization to supersonic cruise aircraft design

This paper presents a discussion of an aircraft shaping method to control sonic boom over-pressure levels along with the analysis of wind-tunnel data which validated the method. The results indicate that the sonic boom minimization method can guide the design team choices of aircraft planform and component arrangement toward a low-boom-level configuration while permitting sufficient freedom and flexibility to satisfy other design criteria. Further, it is shown that off-design flight conditions do not drastically change the overpressure sonic boom shape and strength.

Mack, R. J.↗

Parameter estimation in X-ray astronomy using maximum likelihood

Methods of estimation of parameter values and confidence regions by maximum likelihood and Fisher efficient scores starting from Poisson probabilities are developed for the nonlinear spectral functions commonly encountered in X-ray astronomy. It is argued that these methods offer significant advantages over the commonly used alternatives called minimum chi-squared because they rely on less pervasive statistical approximations and so may be expected to remain valid for data of poorer quality. Extensive numerical simulations of the maximum likelihood method are reported which verify that the best-fit parameter value and confidence region calculations are correct over a wide range of input spectra.

Wachter, K.↗

Turbid water measurements of remote sensing penetration depth at visible and near-infrared wavelength

Remote sensing of water quality is dicussed. Remote sensing penetration depth is a function both of water type and wavelength. Results of three tests to help demonstrate the magnitude of this dependence are presented. The water depth to which the remote-sensor data was valid was always less than that of the Secchi disk depth, although not always the same fraction of that depth. The penetration depths were wavelength dependent and showed the greatest variation for the water type with largest Secchi depth. The presence of a reflective plate, simulating a reflective subsurface, increased the apparent depth of light penetration from that calculated for water of infinite depth.

Morris, W. D.↗

Basic research in wake vortex alleviation using a variable twist wing

The variable twist wing concept was used to investigate the relative effects of lift and turbulence distribution on the rolled up vortex wake. Several methods of reducing the vortex strength behind an aircraft were identified. These involve the redistribution of lift spanwise on the wing and drag distribution along the wing. Initial attempts to use the variable twist wing velocity data to validate the WAKE computer code have shown a strong correlation, although the vorticity levels were not exactly matched.

Morris, D. J.↗

Satellite and correlative measurements of the stratospheric aerosol. II Comparison of measurements made by SAM II, dustsondes and airborne lidar

Results are shown from the first set of measurements conducted to validate extinction data from the Stratospheric Aerosol Measurement II (SAM II). Dustsonde-measured number density profiles and lidar-measured backscattering profiles for two days are converted to extinction profiles, and are shown to agree within their respective uncertainties at all heights above the tropopause. Near the tropopause, agreement depends on use of model size distributions with larger particles, having radii greater than 0.6 microns. The presence of such large particles is supported by measurements made elsewhere, is suggested by the in situ size distribution measurements reported, and is likely to have an important bearing on the radiative impact of the total stratospheric aerosol. It is concluded that the SAM II extinction data and uncertainty estimates are supported.

Russell, P. B.↗

F-16E program overview and wind tunnel/flight correlation

Correlation is defined in three different ways: comparisons of wind tunnel and/or theory with flight results; detailed studies of total vehicle drag from wind tunnel and flight tests; and attempts to understand the fundamental mechanisms of fluid flows associated with aircraft components in specific areas of the flight environment. The F-16E configuration is an outgrowth of studies conducted to produce a refined fighter wing design. Several iterations required to arrive at the combination of wing planform, camber, and twist which gives near optimum lift, drag, and high-angle-of-attack stability. Theoretical analyses were backed up by extensive experimental data to validate the design and are presented

Madsen, A. P.↗

DSN Command System Mark IV-85

A functional description of command subsystem software modifications providing computer-controlled prepass data transfer, validation tests, and revised displays are described. The Mark 4-A implementation schedule is presented and subsystems configurations for the Mark 4-85 system summarized.

Thorman, H. C.↗

Winds over the ocean as measured by the scatterometer on Seasat

An analysis is presented of the relative accuracy of Seasat scatterometer measurements of the wind speeds and directions at 19.5 m altitude as compared to ground truth measurements taken by surface ships and instrumented buoys. Attention is given to the JASIN, QE II, and GOASEX surface data. The validity of 2-30 min averages taken from surface stations spread out over a wide area and serving as a basis for defining wind field averages over the 50 km resolution of SASS is examined. Satisfactory wind speeds were found to be available from SASS readings in the wind speed range 6-14 m/sec. The use of 25 SASS readings around a grid point was determined to reduce scatter to 0.25 m/sec when used in numerical weather prediction modeling. Improvements to the SASS techniques by the Seasat successor, NOSS, are discussed, and inclusion of momentum, heat, and water turbulent fluxes by NOSS is noted.

Pierson, W. J.↗

Comparison of simulator fidelity model predictions with in-simulator evaluation data

A full factorial in simulator experiment of a single axis, multiloop, compensatory pitch tracking task is described. The experiment was conducted to provide data to validate extensions to an analytic, closed loop model of a real time digital simulation facility. The results of the experiment encompassing various simulation fidelity factors, such as visual delay, digital integration algorithms, computer iteration rates, control loading bandwidths and proprioceptive cues, and g-seat kinesthetic cues, are compared with predictions obtained from the analytic model incorporating an optimal control model of the human pilot. The in-simulator results demonstrate more sensitivity to the g-seat and to the control loader conditions than were predicted by the model. However, the model predictions are generally upheld, although the predicted magnitudes of the states and of the error terms are sometimes off considerably. Of particular concern is the large sensitivity difference for one control loader condition, as well as the model/in-simulator mismatch in the magnitude of the plant states when the other states match.

Parrish, R. V.↗

Simulator study of the stall departure characteristics of a light general aviation airplane with and without a wing-leading-edge modification

A six-degree-of-freedom nonlinear simulation was developed for a two-place, single-engine, low-wing general aviation airplane for the stall and initial departure regions of flight. Two configurations, one with and one without an outboard wing-leading-edge modification, were modeled. The math models developed are presented simulation predictions and flight-test data for validation purposes and simulation results for the two configurations for various maneuvers and power settings are compared to show the beneficial influence of adding the wing-leading-edge modification.

Riley, D. R.↗

Satellite radiation observations and climate theory

The representative applications of satellite observations of the earth radiation budget in climate studies are discussed. Consideration is given to the use of satellite observational data for validating numerical estimates of the sensitivity of longwave radiation, surface temperature, and cloud amount to changes in the radiation budget. Particular emphasis is given to the application of satellite observations to the validation of temperature estimates obtained from the NOAA Seasonal Hemispheric Zonal Average Model (SZHAM).

Ohring, G.↗

Satellite measurement of aerosol mass over land

The estimation of aerosol optical thickness and mass from satellite observations over land is demonstrated using data from the GOES Visible/IR Spin-Scan Radiometer for the eastern U.S. The post-launch calibration technique is described; the algorithm used to derive optical thickness from the radiance of scattered sunlight (by means of a radiative-transfer model in which the optical characteristics of the aerosol are assumed) is presented; and data on aerosol S for July 31, 1980 are analyzed. The results are presented in a series of graphs and maps and compared with ground-based data. The errors in the optical thickness and columnar mass are estimated as 15 and 40 percent, respectively, and the need for independent-data-set validation of satellite-based mass, transport, and divergence values is indicated.

Fraser, R. S.↗

Pulsed Doppler lidar airborne scanner

This report covers the work accomplished during the reporting period on Pulsed Doppler Lidar Airborne Scanner and describes plans for the next reporting period. The objectives during the current phase of the contract are divided into four phases. Phase 1 includes ground testing of the system and analysis of data from the 1981 Severe Storms Test Flights. Phase 2 consists of preflight preparation and planning for the 1983 flight series. The flight test itself will be performed during Phase 3, and Phase 4 consists of post-flight analysis and operation of the system after that flight test. The range profile from five samples taken during Flight 10, around 1700 Z is given. The lowest curve is taken from data collected upwind of Mt. Shasta at about 10,000 feet of altitude, in a clear atmosphere, where no signals were observed. It thus is a good representation of the noise level as a function of range. The next curve was taken downwind of the mountain, and shows evidence of atmospheric returns. There is some question as to whether the data are valid at all ranges, or some ranges are contaminated by the others.

Dimarzio, C. A.↗

Sulfur in achondritic meteorites

The sulfur abundances of samples of nearly 50 achondrites were examined to enlarge the database on the sulfur contents of various categories of achondrites. The study covered eucrites, howardites, diogenites, shergottites, chassignites, nakhilites, aubrites and three unique specimens. The study was spurred by the possibility that the S abundances could help identify the meteorites as originating on Mars or Venus. The S abundances and distributions varied widely, but confirmed that the data were valid indicators of the brecciation and thermal metamorphic history of each meteorite.

Gibson, E. K.↗

The computation of steady 3-D separated flows over aerodynamic bodies at incidence and yaw

This paper describes the implementation of a general purpose 3-D NS code and its application to simulated 3-D separated vortical flows over aerodynamic bodies. The thin-layer Reynolds-averaged NS equations are solved by an implicit approximate factorization scheme. The pencil data structure enables the code to run on very fine grids using only limited incore memories. Solutions of a low subsonic flow over an inclined ellipsoid are compared with experimental data to validate the code. Transonic flows over a yawed elliptical wing at incidence are computed and separations occurred at different yaw angles are discussed.

Pulliam, T. H.↗

Challenges of physiological monitoring in a Navy operational setting

Challenges to physiological monitoring in the Navy include environmental extremes, acceptance of use by test subjects, data transfer, data interpretation, and capability of relating collected data to valid operational relevant criterion measures. These problems are discussed with respect to diving, electrophysiological monitoring, in-flight monitoring, aircrew fatigue, in-flight cardiac stress, and in-flight monitoring devices.

Banta, Guy R.↗

Numerical solution of a two-dimensional jet in a supersonic crossflow using an upwind relaxation scheme

A numerical scheme for predicting complex two-dimensional viscous flow fields is presented. The algorithm uses Roe's method for defining the inviscid fluxes and a line relaxation scheme to solve the resulting discrete approximation. The effects of turbulence are modelled using an algebraic eddy viscosity model. An adaptive grid scheme is employed to improve the resolution of complex flow field phenomena. The algorithm is applied to the solution of a sonic jet in a supersonic crossflow. Numerical results are compared with experimental data to validate the numerical approach.

Thompson, D. S.↗

Quantitative characterization of a nonreacting, supersonic combustor flowfield using unified, laser-induced iodine fluorescence

A calibrated, nonintrusive optical technique, laser-induced iodine fluorescence (LIIF) was used to quantify the steady, compressible flowfield of a nonreacting, supersonic combustor. The combustor was configured with single and staged, transverse-air injection into a supersonic-air freestream behind a rearward-facing step. Pressure, temperature, two-velocity components, and injectant mole fraction were measured with high spatial resolution in the three-dimensional flowfields. These experimental results provide a benchmark set of data for validation of computational fluid dynamic (CFD) codes being developed to model supersonic combustor flowfields.

Fletcher, D. G.↗