Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data analysis, visualization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Application of LANDSAT system for improving methodology for inventory and classification of wetlands

The author has identified the following significant results. Processing of LANDSAT MSS data for detection of prairie ponds and lakes was completed. Data coverage included a 36,876 sq km area in southeastern North Dakota during May and July. Cloud coverage limited the May coverage to 87% of the total area. Data analysis was accomplished using three software programs. Wetland identification by MSS sensors were compared to visual counts obtained by observers in low flying aircraft. Pond numbers identified by LANDSAT averaged about 20% of those counted visually. The discrepancy was attributed to the fact that approximately 75% of the ponds in the glaciated prairie region are less than 0.4 ha in size. It is significant, however, that LANDSAT counts accurately reflect trends.

Gilmer, D. S.↗
NASA NTRS1981

Heat Capacity Mapping Mission (HCMM): Interpretation of imagery over Canada

Visual analysis of HCMM images acquired over two sites in Canada and supporting aircraft and ground data obtained at a smaller subsite in Alberta show that nightime surface temperature distribution is primarily related to the near-surface air temperature; the effects of topography, wind, and land cover were low or indirect through air temperature. Surface cover and large altitudinal differences were important parameters influencing daytime apparent temperature values. A quantitative analysis of the relationship between the antecedent precipitation index and the satellite thermal IR measurements did not yield statistically significant correlation coefficients, but the correlations had a definite temporal trend which could be related to the increasing uniformity of vegetation cover. The large pixel size (resulting in a mixture of cover types and soil/canopy temperatures measured by the satellite) and high cloud cover frequency found in images covering both Canadian sites and northern U.S. were considered the main deficiencies of the thermal satellite data.

Cihlar, J.↗
NASA NTRS1985

Potential applications of multipolarization SAR for pine plantation biomass estimation

This study was conducted as a part of the research tasks under the Radar Land Cover Analysis Program. The Radar Land Cover Analysis objective is, through utilization of multisensor data, to gain a basic understanding of the measurements and data characteristics in the visible-IR-microwave regions of the electromagnetic spectrum associated with specific surface features and cover types. Since the results of analysis of data acquired by Shuttle Imaging Radar (SIR-A) and LANDSAT Thematic Mapper (TM) over the study area were reported (NSTL/ERL Report No. 228, December 1984), this study focused on the analysis and evaluation of the L-band multipolarization airborne SAR data acquired over a southeastern pine forest scene. The data acquisition mission was flown on September 8 and 9, 1983. The HH, HV polarizations and the VV, VH polarizations were used on the first and the second day, respectively. Due to instrumentation difficulties, the digital recorder recorded only the second day's data. Because of this, only the VV and VH polarization data were used in this analysis. However, the HH and HV polarization images were available for visual comparison. It appears that SAR digital numbers correlate with the index of green biomass.

Wu, S. T.↗
NASA NTRS1989

Engineering visualization utilizing advanced animation

Engineering visualization is the use of computer graphics to depict engineering analysis and simulation in visual form from project planning through documentation. Graphics displays let engineers see data represented dynamically which permits the quick evaluation of results. The current state of graphics hardware and software generally allows the creation of two types of 3D graphics. The use of animated video as an engineering visualization tool is presented. The engineering, animation, and videography aspects of animated video production are each discussed. Specific issues include the integration of staffing expertise, hardware, software, and the various production processes. A detailed explanation of the animation process reveals the capabilities of this unique engineering visualization method. Automation of animation and video production processes are covered and future directions are proposed.

Sabionski, Gunter R.↗
NASA NTRS2000

New Technology-Large-Area Three- Dimensional Surface Profiling Using Only Focused Air-Coupled Ultrasound-Given 1999 R&D 100 Award

Surface topography, which significantly affects the performance of many industrial components, is normally measured with diamond-tip profilometry over small areas or with optical scattering methods over larger areas. To develop air-coupled surface profilometry, the NASA Glenn Research Center at Lewis Field initiated a Space Act Agreement with Sonix, Inc., through two Glenn programs, the Advanced High Temperature Engine Materials Program (HITEMP) and COMMTECH. The work resulted in quantitative surface topography profiles obtained using only high-frequency, focused ultrasonic pulses in air. The method is nondestructive, noninvasive, and noncontact, and it does not require light-reflective surfaces. Air surface profiling may be desirable when diamond-tip or laserbased methods are impractical, such as over large areas, when a significant depth range is required, or for curved surfaces. When the configuration is optimized, the method is reasonably rapid and all the quantitative analysis facilities are online, including two- and three-dimensional visualization, extreme value filtering (for faulty data), and leveling.

Roth, Don J.↗
NASA NTRS2011

Constructive Engineering of Simulations

Joint experimentation that investigates sensor optimization, re-tasking and management has far reaching implications for Department of Defense, Interagency and multinational partners. An adaption of traditional human in the loop (HITL) Modeling and Simulation (M&S) was one approach used to generate the findings necessary to derive and support these implications. Here an entity-based simulation was re-engineered to run on USJFCOM's High Performance Computer (HPC). The HPC was used to support the vast number of constructive runs necessary to produce statistically significant data in a timely manner. Then from the resulting sensitivity analysis, event designers blended the necessary visualization and decision making components into a synthetic environment for the HITL simulations trials. These trials focused on areas where human decision making had the greatest impact on the sensor investigations. Thus, this paper discusses how re-engineering existing M&S for constructive applications can positively influence the design of an associated HITL experiment.

Snyder, Daniel R.↗
NASA NTRS2008

A Lunar Surface Operations Simulator

The Lunar Surface Operations Simulator (LSOS) is being developed to support planning and design of space missions to return astronauts to the moon. Vehicles, habitats, dynamic and physical processes and related environment systems are modeled and simulated in LSOS to assist in the visualization and design optimization of systems for lunar surface operations. A parametric analysis tool and a data browser were also implemented to provide an intuitive interface to run multiple simulations and review their results. The simulator and parametric analysis capability are described in this paper.

Nayar, H.↗
NASA NTRSDate not supplied

An Oveview of TROPESS Data Products and Services at the NASA GES DISC

The TRopospheric Ozone and Precursors from Earth System Sounding (TROPESS) project generates Earth System Data Records (ESDRs) of ozone, and other atmospheric constituents (CH4,CO, H2O, HDO, NH3, PAN and temperature) by processing data from multiple satellites through a common retrieval algorithm and ground data system. Satellite Level-1B input data used in generating the TROPESS L2 data products include CrIS NOAA-20 (JPSS-1), CrIS SNPP, AIRS Aqua, OMI Aura, and TROPOMI S5P. The common retrieval framework is known as the MUlti-SpEctra, MUlti-SpEcies, Multi-SEnsors (MUSES) science data processing system (MUSES-SDPS). Several of the TROPESS data products are now available from the NASA Goddard Earth Sciences Data and Information Service Center (GES DISC) for users to download. In this presentation we provide an overview of the various TROPESS data products. These data products can be divided into the following Forward Stream types: Standard Products, Summary Products, and Full-Archival Products. Standard Products are for users that are doing full analysis with avenging kernel and covariance corresponding to retrieved vertical profiles. Summary products have a smaller file size and are more convenient for first-look and rapid analysis, include total and partial columns, as well as column averaging kernels. The Full-Archival Products will contain all information used in creating the data. TROPESS also creates Special Products, provided on an as-needed and as-available basis to support NASA field missions and individual-investigator requests over specific regions. Eventually, TROPESS will also produce and deliver a set of Reanalysis Stream products. Data at the GES DISC are being transitioned into the "Cloud". This will allow users with "Cloud” access to perform data analysis directly on the data without downloading the data to their system. Services, such as subsetting and data visualization, will also be provided for TROPESS data products at the GES DISC.

James Johnson↗
NASA NTRSDate not supplied

RadLab: A Comprehensive Database and Graphical and Programming Interfaces for Biologically Relevant Space Radiation Data

RadLab, a new component of the NASA Open Science Data Repository (OSDR), is a platform built upon a database of radiation data relevant to space biology. RadLab provides visual and programmatic interfaces for interrogation of its database, as well as a submission process for inclusion of data from investigators. The RadLab application programming interface (API) implements a request syntax enabling users to retrieve data filtered by various combinations of parameters (detector type, location, direction, timespan, etc), which are delivered in machine-readable text formats, ready to be ingested by downstream analysis pipelines; while the graphical user interface (GUI) provides easy means to iteratively modify query parameters and incorporates a number of standard analyses and visualizations (time series plots, geospatial visualizations, detector comparison). Investigators from many countries, including US, Russia, Japan, Canada, the Czech Republic, Germany, Hungary, and Italy, have committed to provide data from their instruments located on the ISS; RadLab will also include data from other spacecraft in LEO (e.g., the Space Shuttle, the Mir space station), BLEO (e. g. BioSentinel, Mars Orbiter, among others), and on other celestial bodies (e. g. Chang’e 4, Curiosity). The first release of RadLab has been made available to the public. Once fully operational, RadLab will provide a comprehensive and ever-growing compendium of space radiation data, facilitating straightforward access to multiple types of readings and enabling space biology researchers to perform intercomparisons of detectors and to determine the radiation environment of research missions, both via programmatic retrieval of these data and via the graphical analysis toolkit; as well as a user-friendly submission portal for ingesting data from space agencies and research institutions. Radiation scientists will be able to use RadLab to gain a deeper understanding of the space radiation environment for future human space exploration. The RadLab Working Group has been formed to foster close collaborations among data contributors and users, to identify data sources, to put in place standards for data normalization, to guide the development of features of the analysis toolkit, to establish the use of RadLab in space radiation biology research, and eventually to provide a forum for discussing relevant research issues that can take advantage of RadLab's capabilities.

radiation↗
NASA NTRS2013

Human and Robotic Mission to Small Bodies: Mapping, Planning and Exploration

This study investigates the requirements, performs a gap analysis and makes a set of recommendations for mapping products and exploration tools required to support operations and scientific discovery for near- term and future NASA missions to small bodies. The mapping products and their requirements are based on the analysis of current mission scenarios (rendezvous, docking, and sample return) and recommendations made by the NEA Users Team (NUT) in the framework of human exploration. The mapping products that sat- isfy operational, scienti c, and public outreach goals include topography, images, albedo, gravity, mass, density, subsurface radar, mineralogical and thermal maps. The gap analysis points to a need for incremental generation of mapping products from low (flyby) to high-resolution data needed for anchoring and docking, real-time spatial data processing for hazard avoidance and astronaut or robot localization in low gravity, high dynamic environments, and motivates a standard for coordinate reference systems capable of describing irregular body shapes. Another aspect investigated in this study is the set of requirements and the gap analysis for exploration tools that support visualization and simulation of operational conditions including soil interactions, environment dynamics, and communications coverage. Building robust, usable data sets and visualisation/simulation tools is the best way for mission designers and simulators to make correct decisions for future missions. In the near term, it is the most useful way to begin building capabilities for small body exploration without needing to commit to specific mission architectures.

Neffian, Ara V.↗
NASA NTRS1974

Investigation of new radar-data-reduction techniques used to determine drag characteristics of a free-flight vehicle

An investigation was conducted of new techniques used to determine the complete transonic drag characteristics of a series of free-flight drop-test models using principally radar tracking data. The full capabilities of the radar tracking and meteorological measurement systems were utilized. In addition, preflight trajectory design, exact kinematic equations, and visual-analytical filtering procedures were employed. The results of this study were compared with the results obtained from analysis of the onboard, accelerometer and pressure sensor data of the only drop-test model that was instrumented. The accelerometer-pressure drag curve was approximated by the radar-data drag curve. However, a small amplitude oscillation on the latter curve precluded a precise definition of its drag rise.

Woodbury, G. E.↗
NASA NTRS1994

An interactive environment for the analysis of large Earth observation and model data sets

Envision is an interactive environment that provides researchers in the earth sciences convenient ways to manage, browse, and visualize large observed or model data sets. Its main features are support for the netCDF and HDF file formats, an easy to use X/Motif user interface, a client-server configuration, and portability to many UNIX workstations. The Envision package also provides new ways to view and change metadata in a set of data files. It permits a scientist to conveniently and efficiently manage large data sets consisting of many data files. It also provides links to popular visualization tools so that data can be quickly browsed. Envision is a public domain package, freely available to the scientific community. Envision software (binaries and source code) and documentation can be obtained from either of these servers: ftp://vista.atmos.uiuc.edu/pub/envision/ and ftp://csrp.tamu.edu/pub/envision/. Detailed descriptions of Envision capabilities and operations can be found in the User's Guide and Reference Manuals distributed with Envision software.

Bowman, Kenneth P.↗
NASA NTRS1974

Effects of wing/elevon gap sealing flapper doors on orbiter elevon effectiveness of model 16-0 in the NAAL 7.75 by 11 foot continuous flow wind tunnel (OA119A)

Space shuttle orbiter elevon effectiveness was measured with the 6 inch elevon/elevon and elevon/fuselage gaps and various configurations of wing/elevon upper hingeline gap sealing flapper doors. The elevon configuration parametric variations consisted of sealing the lower hingeline to prevent flow-through and testing a long chord flapper door, a short chord flapper door, no flapper door (elevon/wing gap upper hingeline completely open), and a completely sealed elevon at elevon deflections from +20 deg to -40 deg. Preliminary data analysis indicates loss of elevon effectiveness at deflections more negative than -20 deg, and little or no effect of flapper door configuration on elevon effectiveness. Flow visualization photographs taken at alpha = 15 deg for two flapper door configurations substantiated the force data results. Aerodynamic force and moment data were measured in the body axis by a 2.5 inch task type internal strain gage balance. The model was sting supported through the base region with a nominal angle of attack range of -10 deg less than or equal to alpha less than or equal to 24 deg at a model angle of sideslip of Beta equal to 0 deg.

Mennell, R.↗
NASA NTRS1994

Data Communications Requirements for CAS Applications

This paper discusses the long-haul data communications requirements needed to support visualization of Computational Aeroscience (CAS) simulations. A scientific computing model is presented, from which current communications requirements are derived. This model is then expanded to describe the CAS Collaborative Visualization Environment, in which scientists from multiple NASA centers will collaborate on multidisciplinary, time-accurate simulations. An analysis of this model, along with data from the TFCC Workload Model, shows that CAS data communications requirements will increase to 10-100 megabytes/second by 1996.

McCabe, James D.↗
NASA NTRS1986

The Comet Halley dust and gas environment

Quantitative descriptions of environments near the nucleus of comet P/Halley have been developed to support spacecraft and mission design for the flyby encounters in March, 1986. To summarize these models as they exist just before the encounters, the relevant data from prior Halley apparitions and from recent cometary research are reviewed. Orbital elements, visual magnitudes, and parameter values and analysis for the nucleus, gas and dust are combined to predict Halley's position, production rates, gas and dust distributions, and electromagnetic radiation field for the current perihelion passage. The predicted numerical results have been useful for estimating likely spacecraft effects, such as impact damage and attitude perturbations. Sample applications are cited, including design of a dust shield for spacecraft structure, and threshold and dynamic range selection for flight experiments. It is expected that the comet's activity may be more irregular than these smoothly varying models predict, and that comparison with the flyby data will be instructive.

Divine, N.↗
NASA NTRS1982

Potential Role of Land Use and Land Cover Information in Powerplant Siting: Example of Three Mile Island

Selecting a site for a nuclear powerplant can be helped by digitizing land use and land cover data, population data, and other pertinent data sets, and then placing them in a geographic information system. Such a system begins with a set of standardized maps for location reference and then provides for retrieval and analysis of spatial data keyed to the maps. This makes possible thematic mapping by computer, or interactive visual display for decisionmaking. It also permits correlating land use area measurements with census and other data (such as fallout dosages), and the updating of all data sets. The system is thus a tool for dealing with resource management problems and for analyzing the interaction between people and their environment. An explanation of a computer-plotted map of land use and cover for Three Mile Island and vicinity is given.

Wray, J. R.↗
NASA NTRS2024

Lunar Terrain Mapping Using 3D Software and Modeling Techniques for the Glenn Research Center Communication Analysis Suite

As NASA prepares to return humans to the Moon as part of upcoming Artemis missions, engineers must examine the surface features and safety of lunar terrain at various locations. The Glenn Research Center Communication Analysis Suite (GCAS) includes visualization tools developed to aid scientists in this quest to comprehend lunar terrain data, as well as spatial communication information. Visual information and understanding will be highly useful to engineers as they use the GCAS to compare the topography of regions of interest for the Artemis III and future space travel missions. Not only can three-dimensional (3D) visualization display the intricacies of the lunar terrain, but it can also demonstrate relationships such as the presence or absence of communication links between Earth ground stations, lunar crew members, and rovers, and the presence of shadows on the lunar surface. In the future, the GCAS has the potential to support the planning of other space exploration missions as well. The emerging possibility of incorporating more planetary bodies becomes especially important as NASA plans not only to return to the Moon but to press onward to Mars.

Visualization↗
NASA NTRS1991

Improved visualization of flow field measurements

A capability was developed that makes it possible to apply to measured flow field data the visualization tools developed to display numerical solutions for computational fluid dynamic problems. The measurement monitor surface (MMS) procedure was applied to the analysis of flow field measurements within a low aspect ratio transonic axial flow fan rotor obtained with 2-D laser anemometry. The procedure generates input for the visualization tools developed to display numerical solutions for computational fluid dynamics problems. The relative Mach number contour plots obtained by this method resemble the conventional contour plots obtained by more traditional methods. The results show that the MMS procedure can be used to generate input for the multidimensional processing and analysis tools developed for data from numerical flow field simulations. They show that an experimenter can apply the MMS procedure to his data and then use an interactive graphics program to display scalar quantities like the Mach number by profiles, carpet plots, contour lines, and surfaces using various colors. Also, flow directionality can be shown by display of vector fields and particle traces.

Miles, Jeffrey Hilton↗